I've downloaded Asus Cover 3.0 on Xenon HD, and it doesn't let me activate. It says that use an original cover, but I am using it, I've tried everything. Can anyone help me?
Yeusepe said:
I've downloaded Asus Cover 3.0 on Xenon HD, and it doesn't let me activate. It says that use an original cover, but I am using it, I've tried everything. Can anyone help me?
Click to expand...
Click to collapse
Wait for the next build of LOS. It has flipflap support and the Asus cover might work.
Related
Hello
My working place don`t allow to enter it with devices which have built-in camera (the reason is to prevent industrial espionage).
I have 2 options, the first is to buy very old phone without camera - i prefer not to do this and the second one is to disassemble my hd2 camera.
I have seen the youtube disassembling hd2 video but in the video they didn`t disassemble the camera.
My quastion is if it hard to do it?
Can it cause to some software problems?
Is someone here have ever did it?
Do you have some guides or good links for this?
Thanks and sorry for my english.
Ofir
Maybe you can modify the software so that the camera doesnt work.
What OS do you have on your HD2.
Hi,
Thanks for your answer,
I`m using andriod 2.3.3 but your solution isn`t good for them.
They want to see device without camera.
ofir_bl said:
Hi,
Thanks for your answer,
I`m using andriod 2.3.3 but your solution isn`t good for them.
They want to see device without camera.
Click to expand...
Click to collapse
Oke thats kinda sucks.
I thinks the best way is to remove the cam en then remove the software as well.
I will try to find some more info how to remove it safety.
Remove the camera bezel, then electrical tape over it with the cover off. Put the cover back on, and volla! No camera.
Sent from my ADR6300 using XDA App
I have found a youtube video where they remove the camera.
Click an skip to 5:00
Hi,
I`m looking at the video,
Is the rigit flex board is used only by the camera?
Is it ok if i remove it from the device?
ofir_bl said:
Hi,
I`m looking at the video,
Is the rigit flex board is used only by the camera?
Is it ok if i remove it from the device?
Click to expand...
Click to collapse
From the point of view the sound control buttons are on the rigit flex board as well.
your actually willing to break a fully functional Leo just for work are you crazy, wouldn't it be less hassle if you just got a different phone, what happens if you need to claim on your warranty at some point ??
just saying.
Screw it leave the camera in and do exactly what they are afraid of record everything. Post on YouTube
Sent from my HTC HD2 using XDA App
OK, I did it and everything pass fine.
Thankyou all everybody.
ofir_bl said:
OK, I did it and everything pass fine.
Thankyou all everybody.
Click to expand...
Click to collapse
Ok nice good luck with your job .
Hi i want to open my galaxy 3 because the audio port is broken (loose connection) and i want to resolder it. I've had this problem with all my mp3 devices, these ports aren't robust enough for me
But has anyone have any expierence with this?
I see there are 6 screws under the cover but i haven't dared yet to open him. Bringing it back isn't an option since it's out of warenty ...
aropop said:
Hi i want to open my galaxy 3 because the audio port is broken (loose connection) and i want to resolder it. I've had this problem with all my mp3 devices, these ports aren't robust enough for me
But has anyone have any expierence with this?
I see there are 6 screws under the cover but i haven't dared yet to open him. Bringing it back isn't an option since it's out of warenty ...
Click to expand...
Click to collapse
Be very careful. Once, I wanted to replace my broken screen, then I turned it on and audio port was not working....probably because I moved with the port. I highly recommend you to take this to some expert.
tadeas482 said:
Be very careful. Once, I wanted to replace my broken screen, then I turned it on and audio port was not working....probably because I moved with the port. I highly recommend you to take this to some expert.
Click to expand...
Click to collapse
I am not saying im an expert, but i've fixed my mp3 player and i do now quite something about soldering.
Did you remove the plastic cover under the batery to replace your screen?
aropop said:
I am not saying im an expert, but i've fixed my mp3 player and i do now quite something about soldering.
Did you remove the plastic cover under the batery to replace your screen?
Click to expand...
Click to collapse
Yes, but that was a while ago.
If you will open your g3 you must know that if you destroy something and you wont know how to replace and you will took it to service, they wont fix your phone amm if you will open your g3 watch on youtube how to open and assemble your g3.
In apologizing for my bad english
Sent from my GT-I5800 using xda premium
Search on youtube: "how to replace samsung i5800 screen"
I followed this tutorial to open my phone and it's good
Sent from my computer using chrome
You can try asking hillbeast for advice
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
It seems (from the screen replace video) to be harder then i thought, since the audio port isn't directy solderd to the motherboard.
But still there is a loose connection so maybe its inside the audioport it self or it isn't mounted correctly on the board
I am having a very hard time removing the rear cover. I've removed the two screws but I still can't seem to get any of my plastic case opening tool in. What gives? I'm almost questioning the importance of those two screws...
Hi,
Maybe this can help you: https://www.youtube.com/watch?v=AZDAIgwbXk4 ? Unless you have already seen it...
viking37 said:
Hi,
Maybe this can help you: https://www.youtube.com/watch?v=AZDAIgwbXk4 ? Unless you have already seen it...
Click to expand...
Click to collapse
I've been watching it. I would love to see anybody take the rear off of my phone... It seriously is stuck.
vbman213 said:
I've been watching it. I would love to see anybody take the rear off of my phone... It seriously is stuck.
Click to expand...
Click to collapse
Mine was stuck too... Gave up and did rma
Sent from my iPad using Tapatalk HD
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
i had this on the september update mate
Name of your cover?
Mine was nillkin mate
Sent from my Mi A1 using Tapatalk
Hey, guys, my LeEco 1S died completely and I am thinking to buy this Mi A1.
Would you recommend it from XDA point of view? I am into flashing and modding but plan to after voiding the warranty(after a year).
Please let me know. Also, I didn't know this device supports magnetic covers like Samsung S-series. A Flipkart link would be helpful, I'll add to my cart to buy when I have funds.
Thanks.
I tested the hall sensor and it's working fine but no go with a cover
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
i have same issue on my phone after this update ...
i tested my hall sensor...its working fine
stasevgl said:
i have same issue on my phone after this update ...
can anybody talk how to check my hall sensor?
Click to expand...
Click to collapse
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
robgee789 said:
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
stasevgl said:
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
Click to expand...
Click to collapse
My hall sensor works mate just not with a smart cover so it's pretty useless but yeah hopefully it will work again in an update
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
Same here!
The flip (Nillkin) was ok before and during the upgrade, with factory settings. I was happy for 1-2 hours only....
After November update problem solved.
Good news is that the 1 Dec firmware update resolve the smart cover issue.
Does anyone else have an issue with their charging port not taking the usb all the way in? It's hanging out for me. I traded my lg v20 for this and the owner claims it has been like that since he bought it. But it seems very weird. Is this normal? Or is there something stuck in the charging port?
Thanks for any input
I had this problem when i bought it.
Strange enough, it was a piece of paper in the port.
When i got it out , it was all good.
Check to see if it's not dusty or has something in it
Unbornlegend123 said:
Does anyone else have an issue with their charging port not taking the usb all the way in? It's hanging out for me. I traded my lg v20 for this and the owner claims it has been like that since he bought it. But it seems very weird. Is this normal? Or is there something stuck in the charging port?
Thanks for any input
Click to expand...
Click to collapse
It shall lock in at the bottom. I expect that the Port is filled up with dust. Try to clean it out carefully with a needle.
Verstuurd vanaf mijn Mi Note 2 met Tapatalk
No luck still unfortunately. It doesn't seem like anything is stuck in there. Tried using a vaccum to suck out any dust or debris but didn't work. I'll keep trying
alexmanu1 said:
I had this problem when i bought it.
Strange enough, it was a piece of paper in the port.
When i got it out , it was all good.
Check to see if it's not dusty or has something in it
Click to expand...
Click to collapse
This one is exactly the same with me, for a few days i tried to buy new usb-c cables, and its not working. And eventually i found a veryyyy tiny piece of paper at the left corner side of the port.
You could use a small sewing needle to poke and see if there are things stuck in between the charging port. Also you can try to push the cable slowly and see where it stucks to identify any unwanted object inside your port.
hope this helps!
Had that one too with another phone , nothing was in there but it worked to load the battery so it was ok for me....
hblek said:
It shall lock in at the bottom. I expect that the Port is filled up with dust. Try to clean it out carefully with a needle.
Verstuurd vanaf mijn Mi Note 2 met Tapatalk
Click to expand...
Click to collapse
never use a needle, it might damage the copper, use a wooden toothpick
I need around 3-4 hours to charge from 10-100% is that normall? Or my fastcharging not working.
gai4000 said:
I need around 3-4 hours to charge from 10-100% is that normall? Or my fastcharging not working.
Click to expand...
Click to collapse
It's not normal. If you are on MIUI, do you get the circle around the lightning sign in the statusbar when you are charging?
alexmanu1 said:
It's not normal. If you are on MIUI, do you get the circle around the lightning sign in the statusbar when you are charging?
Click to expand...
Click to collapse
Im not getting that icon in status bar. However am using charger that come in the box. :/
gai4000 said:
Im not getting that icon in status bar. However am using charger that come in the box. :/
Click to expand...
Click to collapse
Are you on MIUI 9?
If yes, i don't really know... It can be a lot of things... Like the cable that you use (if you use the one that comes in the box you are ok), the port is dusty, the rom needs to be flashed with fastboot , or you didn't do a factory reset when you updated from miui 8....
alexmanu1 said:
Are you on MIUI 9?
If yes, i don't really know... It can be a lot of things... Like the cable that you use (if you use the one that comes in the box you are ok), the port is dusty, the rom needs to be flashed with fastboot , or you didn't do a factory reset when you updated from miui 8....
Click to expand...
Click to collapse
I am using 8.5 version. If i update to 9, do i need to flash twrp again later?
I got update for 9,but didn't updated it yet.
gai4000 said:
I am using 8.5 version. If i update to 9, do i need to flash twrp again later?
I got update for 9,but didn't updated it yet.
Click to expand...
Click to collapse
If you are on 8.5 , it's fine. That's a thing that comes with the update for Miui 9.