Originally I posted this is the qna forum but then I found this forum so im posting it here.
So i have this samsung galaxy s4 sgh i337m with lineage os 14.1 installed on it. Everything seems to work fine on it, but some times when I turn it off and turn it back on, it bypasses the lock screen and just unlocks it, after a while the phone just all of a sudden cuts to the lock screen and when I unlock it the screen goes black and the phone goes into a bootloop. After I pull the battery out and put it back to boot up. It seems to work but the whole thing would happen again.
I tried searching for a solution on google but nothing helpful shows up.
Sometimes the lockscreen wont even respond to my touches
Also whenever I reboot, there's the Kernel is not seandroid enforcing error on the top left.
Does anybody know what's going on here?
Also Im pretty noob at this so dont expect much knowledge from me sorry in advance
Does this happen on a stock ROM? If not, I'd say it's a bug with Lineage.
Have you tried updating Lineage?
The forum for the sgh-i337m is here: https://forum.xda-developers.com/galaxy-s4-att
audit13 said:
Does this happen on a stock ROM? If not, I'd say it's a bug with Lineage.
Have you tried updating Lineage?
The forum for the sgh-i337m is here: https://forum.xda-developers.com/galaxy-s4-att
Click to expand...
Click to collapse
The same thing was happening with the stock rom even after I flashed stock firmware for it.
Also should I post this again on the forums for the sgh i337m? I feel like a nuisance for doing this 2 times already.
Since this happens on a stock ROM too, it may be a hardware issue.
Is the phone running the latest bootloader and modem?
You posted your issue in the lineage thread?
If you want, you could ask a moderator to close this thread and start a new thread in the forum for your s4.
audit13 said:
Since this happens on a stock ROM too, it may be a hardware issue.
Is the phone running the latest bootloader and modem?
You posted your issue in the lineage thread?
If you want, you could ask a moderator to close this thread and start a new thread in the forum for your s4.
Click to expand...
Click to collapse
I think this is a hardware issue. Thanks for the help anyways
Related
Anybody with the official Samsung S4 Google edition root or install a custom recovery like TWRP on their device yet? I am getting mine next week and I have not seen any forums for this phone. I am on AT&T but I am thinking T-Mobile TWRP would work once it is rooted since it is unlocked boot loader?
Not sure if anybody got their phone in yet??
Thanks in advance.
Questions go in Q&A
Thread moved
FNM
http://forum.xda-developers.com/showthread.php?t=2343938
sabre31 said:
Anybody with the official Samsung S4 Google edition root or install a custom recovery like TWRP on their device yet? I am getting mine next week and I have not seen any forums for this phone. I am on AT&T but I am thinking T-Mobile TWRP would work once it is rooted since it is unlocked boot loader?
Not sure if anybody got their phone in yet??
Thanks in advance.
Click to expand...
Click to collapse
But, we do have a thread, in this same forum, and we have discussed this exact thing there, please use the google thread to get answers to these questions that involve the GE rom, I stay active in that thread daily, as do others.
and xBeerdroiDx, thanks, I get 8 thanks to use a day, and you got 3 today from me. No more for you!
TheAxman said:
But, we do have a thread, in this same forum, and we have discussed this exact thing there, please use the google thread to get answers to these questions that involve the GE rom, I stay active in that thread daily, as do others.
and xBeerdroiDx, thanks, I get 8 thanks to use a day, and you got 3 today from me. No more for you!
Click to expand...
Click to collapse
I will ask the question in that thread..thanks for pointing it out. Reason I didn't ask in that thread in first place is because it relates to the GE leaked rom on AT&T/CAN S4. My question is related to the actual phone from google that ships from them. I am thinking everything should be same as the TMO version as far as partitions and root methods. I will ask in that thread.
Thanks
Hi guys, I have a question regarding some roming stuff with the verizon version of the galaxy note 3. I am not new to roms by any means and I have been searching frantically to find one place with the complete answer im looking for. I made the early mistake of taking the OTA upgrade for KK, therefore I am currently running 4.4.2 with the NC4 build and NC4 baseband. Now while i have easily rooted my phone at this point with the towelroot. I also have had no problem getting the new 3.72 safestrap installed and running on my phone. My question now at this point is trying to figure out my next step with a new ROM I am trying install....I have been looking at all of my info to get the Hyperdrive ROM installed and I cant seem to find all the info I need in one location. Can I or can I not flash a new ROM to the NC4 baseband? I have seen some information where some people say I might be able to flash the NC2 kernal using ODIN and others say just trying to flash any ROM in general creates a black screen in which a battery pull needs to be done...yada yada.....? So in short, am I able to flash a ROM to the note 3 at this point or am I S.O.L? :crying:
You are not going to receive an answer because you posted a question in the "General" section. Hopefully a mod can move this thread to the "Q & A" section.
Thanks...
Gee thanks?
jkuczy16 said:
You are not going to receive an answer because you posted a question in the "General" section. Hopefully a mod can move this thread to the "Q & A" section.
Click to expand...
Click to collapse
I am in the same exact predicament. Every rom I install just gives me a black screen. I'd love a solution to this.
Sent from my SM-N900V using XDA Free mobile app
JasmineRom 1.7.2
Check out the OP by hsbadr he has done some great work and he lists very specific instructions on how to complete the flash of firmware/modem and rom without any problems
flashing note 3 custom roms etc to avoid "mandatory updates.
I'm in the same boat. I read that there's a possibility I should flash NC2 but I can't find a write up or sticky that says how. However I just received a notice that pointed me to some threads and answered my questions on terminology. ThankYou DavidFlory!! I will formally thank you in the thread. Until I can clear up the NC4/NC2 question I plan on keeping the rooted KitKat I've got. I'm scared Verizon/Google will attack again with a mandatory "update." Who's phone is this? What if I firewalled Verizon updater? Or froze it? The other day I did something that had columns of 3 pt text cascading on my screens until I used Samsung Kies to back me up flash the stock rom again. Root was retained. This was a worthwhile exercise as I had gotten carried away downloading android utilities.
alt230
SM-N900VVRUNC4
johnnybravo19 said:
Check out the OP by hsbadr he has done some great work and he lists very specific instructions on how to complete the flash of firmware/modem and rom without any problems
Click to expand...
Click to collapse
Do you have the link?
OK so I found the link, followed every step I could which took a couple hours of research to get everything together. ...I flashed the jasmine rom, everything seemed to work fine until the last file in which Odin was successful, then I get a black screen that doesn't go away with any other means than a battery pull. Luckily I used the new 3.75 so I was able to do my rom under a different slot than stock...but maybe that's also the problem? So I'm back with a wiped phone and no custom rom which is irritating
JasmineROM
johnnybravo19 said:
Check out the OP by hsbadr he has done some great work and he lists very specific instructions on how to complete the flash of firmware/modem and rom without any problems
Click to expand...
Click to collapse
Do you know where I can get the link for the JasmineROM 1.7.2 because 8 flashed 2.0 and it is devouring my battery.
Q&A for [AOSPA 4.4.4 KTU84P] ParanoidAndroid 4.4+ G2 [06/28]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
NEO2598 said:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
Click to expand...
Click to collapse
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
MeestaAytch said:
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
It has been stated in the ROM thread multiple times that you must use a 4.2 STOCK JB MODEM for best compatibility. Any other modems you guys use is solely at YOUR OWN DISCRETION. @MeestaAytch they should know what to use at this point but thanks for clarifying again for those who don't want to search before posting :highfive:
@jakew02 no problem. I know it's tiring repeating the same information but from what I've seen in my time using XDA.... It'll never change.
I'm glad you devs still continue doing what you're doing for us though knowing this nonsense goes on.
Sent from my LG-LS980 using Tapatalk
A few bugs
Hi,
The thread is too big for me to go thru it post by post so I'll just make a few questions and hopefully I'll get some answers. I flashed this ROM and it was working flawlessly. I only found very few bugs like not being able to set up multiple recurrent alarms because the app would freeze and there was another bug but I can't remember. The problem I find frustrating is with the text messages or SMSs. At first I was not receiving SMSs. Then I was receiving them but I couldn't send any. I returned back to stock VS98024a and I'm still having the same problem but at least I'm getting a pop-up when "General problems: cause code 96". I have googled this several times in several ways and can't seem to find a solution, not even on the Verizon site or help app on the phone. I need help with this please.
How to keep the back home task manager buttor on the screen?
battery life? i want to install on lg d800 and its beta only..
dori kernel
Hi,
From where you get Dorimanx kernel for AOSP ROMs ?
My phone says it can't connect to the camera, and the torch. Does anyone know how to solve this?
Sent from my LG-LS980 using XDA Free mobile app
LG G2 D802 SIM not recognized
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
a13xch1 said:
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
Click to expand...
Click to collapse
Please state exact filename and order of wipe/flash.
Just tried the test build for D802. Booted at LG logo for a while then screen turned black with 2 red lines and one green vertical line. I was so sure I was gonna get the permanent black lines but then again I read that the damaged screens are caused by already faulty hardware under high heat.
Anyways, I panicked and then I restarted the phone by pressing power + down. Then I got the weird boot sequence like everyone above describes and it boots into the OS. Thank God I got no black lines! However it wasn't stable for me as the phone rebooted itself twice within the span of 20 minutes. I'm going back to 13/10 build for now.
Any d802 users flashing latest twitter released rom can you please report here if jdi or lgd and whether or not weird logo appeared?
I'm on jdi and had weird logo appeared after clean flash. I did not let the rom boot and reflashed previous version without further problems
FYI, houston's latest works great so far on the VS980. Clean flash, using RenderKernel R24.
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
jclemens23 said:
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
Click to expand...
Click to collapse
Migrating from one ROM to another is for me like this:
1. Nandroid backup
2. Wipe all except sdcard (yes, wipe system)
3. Flash new ROM
Be sure to always have a Nandroid backup!
And always check what baseband (aka radios or modem) your new ROM is requiring.
-___-
If you are UPDATING your current ROM, I.e. flashing a new build of let's say paranoid android, you can flash the updated file right on top of your old system. That is called DIRTY FLASHING and it's actually risky, so please, always do Nandroid backups!
-____-
Peace
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
jclemens23 said:
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
Click to expand...
Click to collapse
Ok
I would;
Update my custom recovery to the latest
Download recommended baseband, to be on the safe side
Redownload the ROM
Check the md5-checksum
Retry to install it
Flash the recommended baseband, better safe than sorry
Never give up
Peace
Hi guys i just flashed the newest build and out of all the roms i have flashed i have never seen this problem. After i flashed i have no sim service at all. Done a clean install still no good.
[Q&A] [ROM]【4.4.4】Google Play Edition 【KTU84P】 - 08-30-2
Q&A for [ROM]【4.4.4】Google Play Edition 【KTU84P】 - 08-30-2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]【4.4.4】Google Play Edition 【KTU84P】 - 08-30-2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
scarmona said:
I'm unable to charge the phone on OFF state, doesn't matter if I turn it off while charging or I plug it in already turned off, the device turns itself on as soon as power goes through, I read something about this regarding the same behavior on Tablets regarding the absence of KitKat bootloader (I haven't flashed a stock KK rom before this)
Thanks again!!
Click to expand...
Click to collapse
I'm also having the same problem. Whenever my phone is off and I plug it in, it turns on. If I turn it off while it's plugged in, it turns back on.
I'm on MDL stock Kernel, could this be causing the problem? Is there another kernel for AT&T that I could use without needing Safestrap?
LTE service issues
I'm having service issues with this rom. Low LTE service and my MMS don't send. 3G and H+ seem to have okay signal. I haven't had this problem before this.
Dan. Any news for the long awaited update. Think you will do a pure nexus build again?
HELP!
I flashed the rom using SafeStrap and the Android logo came out and my Galaxy S4 vibrating all the time and wont start up, just stays like that freezed. please help have i dont something wrong?
Anyone able to get the OK Google everywhere working? I've tried about all I can think of and it won't unlock the settings.
Sent from my GT-I9505G using Tapatalk
pajozule said:
I flashed the rom using SafeStrap and the Android logo came out and my Galaxy S4 vibrating all the time and wont start up, just stays like that freezed. please help have i dont something wrong?
Click to expand...
Click to collapse
This ROM is NOT SafeStrap compatible
Thanks
I've installed this and tested it for a day and it is awesome, thanks a lot! ^.^
Camera slow motion?
for this rom, i can't seem to find the slow motion video capture option
Android Logo Stuck
pajozule said:
I flashed the rom using SafeStrap and the Android logo came out and my Galaxy S4 vibrating all the time and wont start up, just stays like that freezed. please help have i dont something wrong?
Click to expand...
Click to collapse
I have the same issue!
daemon8814 said:
I have the same issue!
Click to expand...
Click to collapse
Happened to me as well. I did a factory reset in settings and that did the trick.
SGH-I337M
Could someone guide me as I'm sure I'm doing something wrong.
On MDL boot loader with ATT.
Attempted to flash NI1 zip and it failed.
Cleared cache, tried again, failed.
Tried again, this time flashing Loki, failed.
What gives?
daemon8814 said:
I have the same issue!
Click to expand...
Click to collapse
I found that you have to use Stock Rom Slot then it worked. Dunno if you can use it with SafeStrap Stock Rom Slot, earlier user said you cant. Use CWM I guess
Harry TestTickles said:
I found that you have to use Stock Rom Slot then it worked. Dunno if you can use it with SafeStrap Stock Rom Slot, earlier user said you cant. Use CWM I guess
Click to expand...
Click to collapse
You guys have gotten this ROM to work with Safestrap? Not referring to this port instead?
http://forum.xda-developers.com/galaxy-s4-att/development/rom-google-edition-s4-t2837239
During calls, my phone acts as if the signal was lost, and the call stays connected but i can't send a text or use data. I tried figuring out why but I dont don't what to do.
Whats the best kernel for a 337M?
Hi, is there any problems if I flash this ROM over the 4.4.2 Samsung ROM (TouchWiz) with knox and all that things?
Will it trip knox to 0x1?
EDIT: Sorry, wrong thread, I posted my question in the correct one.
Does anyone get random vibrations with this rom? Its just a single buzz here and there but I can link it to any particular event.
Sent from my GT-I9505G using XDA Free mobile app
question from me
can i install it on an other device??
matchstick13 said:
Does anyone get random vibrations with this rom? Its just a single buzz here and there but I can link it to any particular event.
Sent from my GT-I9505G using XDA Free mobile app
Click to expand...
Click to collapse
Yep, sure do. Trying out CM11 now, seems to have fixed it. Might try this Rom again, with no add-ons and no xposed.
*made the topic cuz I couldn't find a fix on previous ones*
Okay so. I am selling the S4 and going for something else. I flashed my Australian OPS 4.4.2 back and noticed that it was not black edition (my hardware is black edition) ... So I downloaded 4.4.2 BTU and flashed it. After a clean flash I rebooted and found out that WiFi was broken so flashed OPS again and since then I get random reboots (soft reboots) on certian conditions:
Calling*
Multitasking*
Third one is more common and annoying:
I have 15 seconds timeout and after 15 seconds the screen goes black (not locked yet) ... when I try power button when the screen is turned off the screen turns on and sometimes it doesn't respond and sometimes it works normally and then the phone crashes either way. It does not reboot like normally. It soft reboots, from boot animation. Uptime doesn't get reset too. And battery drains like crazy. Battery was so cool when using CM. It all happened after I flashed that firmware with odin
TL-DR: Flashed BTU on OPS. Reverted to OPS and things hit the fan! Happens mostly when locking / unlocking.
I'd appreciate a solution without needing Xposed cuz I'm selling this.
Why not flash a lollipop rom?
GDReaper said:
Why not flash a lollipop rom?
Click to expand...
Click to collapse
I would but I'm afraid if it gives me WiFi issue or SIM issue. OPS doesn't have LP either. And I don't wanna custom rom cuz I'm selling this out. I can't downgrade once up to LP right? :/
If it is not carrier locked then you can flash any stock tw rom on the device.
You can downgrade. There are some guides. You might want to read those guides first to make sure you're up to the task.
GDReaper said:
If it is not carrier locked then you can flash any stock tw rom on the device.
You can downgrade. There are some guides. You might want to read those guides first to make sure you're up to the task.
Click to expand...
Click to collapse
Oh really? That's so cool I didn't know... Thanks buddy and yeah mine is Optus Australian ROM but I am using UFONE Pakistan SIM so it is unlocked. But BTU just broke my wifi. Well, clean flashed OPS and it fixed RANDOM reboots. Till yet probably.... Clean flash BTU might get WIFI working too. Thanks