What is this?
First of all, hi everyone
I decided to try my best to archive all the possible OTA updates (paths) that a Moto G5 (cedric) users can take.
With the various risks of clean / factory flashes in mind, I thought that some users might prefer using ZIPs to update their device instead. These can prove to be especially useful if your Moto is on a Software Channel that gets very little updates, or if you have no SIM card inserted as that often breaks updating capabilities.
As of now 29 unique OTA files are in the archive, starting from the earliest software version I could find online. The ZIPs are hosted on Google Drive, if you know of a better location then feel free to drop a suggestion. Along with that, any type of feedback for this archival project is welcome. If you or any of your friends own a Moto that is not necessarily a G5 and are stuck on an older firmware, I'll try to do my best to find an upgrade path that would work. Thank you for your attention and I hope you appreciate this.
Where do I get the OTA files?
retail Moto G5: https://drive.google.com/drive/folders/1BkpfHvgQ477NViLYvzgv88Fgq3SSt5Py?usp=sharing
amzin Moto G5: https://drive.google.com/drive/folders/1Lj8uwBI4tR4v5I_hl74SVW21Fmg0qc0E?usp=sharing
What do the ZIP file names mean?
Along with the ZIPs, there's a file called "BlurBuildList.txt" in the Google Drive folder which shows you the relation between Blur_Version and regular Build Numbers.
Let's say your phone currently runs NPPS25.137-93-2-3 and you want to update to NPPS25.137-93-2-5
In the TXT file, you can see that
NPPS25.137-93-2-3 corresponds to Blur_Version.25.331.5.cedric.retail.en.US
NPPS25.137-93-2-5 corresponds to Blur_Version.25.361.10.cedric.retail.en.US
In this case, you'll want the file called block_delta-ota-Blur_Version.25.331.5-25.361.10.cedric.retail.en.US.zip
Sometimes you'll need to use multiple files to get the desired version, for example if you are on Blur_Version.25.311.3.cedric.retail.en.US you would need to use 2 files to update to Blur_Version.25.361.10.cedric.retail.en.US.
Why? Because block_delta-ota-Blur_Version.25.311.3-25.361.10.cedric.retail.en.US.zip doesn't exist but these two do:
block_delta-ota-Blur_Version.25.311.3-25.331.5.cedric.retail.en.US.zip
block_delta-ota-Blur_Version.25.331.5-25.361.10.cedric.retail.en.US.zip
How do I install these?
Method 1 - ADB Sideload
Boot your phone to recovery mode
Connect your phone to your PC
Select "Apply update from ADB"
On your PC run
Code:
adb sideload <path to ZIP file>
Method 2 - SD card
Put the ZIP on your phone's SD card while it is in Android
Boot your phone to recovery mode
Select "Apply update from SD card"
Navigate to where you put the ZIP and select it
If you found this thread useful and/or helpful, a Thanks is much appreciated :highfive:
Thank you very much!
moto g4 play ?
takoa said:
moto g4 play ?
Click to expand...
Click to collapse
No this is for the Moto g5... That's why it's in the Moto g5 thread!
takoa said:
moto g4 play ?
Click to expand...
Click to collapse
I can help out with finding a Moto G4 Play upgrade path if needed but please don't count with a big archive like the G5 one, my bandwidth isn't the best
great i'm on NPPS25.137-93-2 (25.311.3) tanks to you, but, can you add the file NPPS25.137-93-2-3 i think is updated patch to May 2018, thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
May OTA now available ?
tfwboredom said:
May OTA now available
Click to expand...
Click to collapse
great, i updated it and now i'm on May 2018 Security Patch, thanks!
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
I used it on my XT1671 DS channel: tigco
yilhernandez said:
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
Click to expand...
Click to collapse
Enviado desde mi Moto G (5) mediante Tapatalk
yilhernandez said:
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
Click to expand...
Click to collapse
As far as I'm aware these aren't XT specific, anyone with a Cedric should be able to use them
May2018 patch another version?
Enviado desde mi Moto G (5) mediante Tapatalk
Caith said:
May2018 patch another version?View attachment 4519345
Enviado desde mi Moto G (5) mediante Tapatalk
Click to expand...
Click to collapse
Thank you for the tip I've uploaded the ZIP and updated the TXT as usual. This particular version is 25.321.18 (NPPS25.137-93-12) which is older than the previously found 25.331.5 (NPPS25.137-93-2-3) though, at least that's how it appears in terms of build numbers.
If there's interest I can also upload OTAs for the amzin variant too
I could not install any or I have the original clipping of my compilation which is NPP25.137.82 si alguien me pudiera ayudar gracia
faeajefexx said:
I could not install any or I have the original clipping of my compilation which is NPP25.137.82 si alguien me pudiera ayudar gracia
Click to expand...
Click to collapse
https://www.laneros.com/temas/lenovo-moto-g5-y-moto-g5-plus.230974/page-10#post-6436373
How can I install these updates (Twrp or stock recovery)???
You need to use stock recovery, the TXT in the Drive folder should help you pair the Blur versions in the filenames to the Build versions you see in your phone's About page in Settings
Can you please upload the OTAs for the amzin variant too?
Thank you in advanced. ??
Hi, do you know if you can publish the soak test for the Moto G5 cedric, looks that in brazil is available the oreo version
achintyakv said:
Can you please upload the OTAs for the amzin variant too?
Thank you in advanced.
Click to expand...
Click to collapse
I’ll add them to the OP later today
Caith said:
Hi, do you know if you can publish the soak test for the Moto G5 cedric, looks that in brazil is available the oreo version
Click to expand...
Click to collapse
If you could give me a serial number from a G5 that got a soak test then I’d gladly upload the ZIP
Related
Convert Moto X 2014 XT1097 from Claro PR to Pure Edition XT1095 &amp; update to Lollipop
Warning: Proceed with caution. I'm not responsible for any damage on your devide. You need to unlock the bootloader on Motorola site first. No root needed. Again I am not responsible for any damages/brick of your device. Only for XT1097 from Calro Puerto Rico. Tested several times on my devices. Working 100%. Follow steps to a T.
You need to have Motorola Drivers Installed, download them from Motorola Site.
ADB/FASTBOOT Is already provided on folders. If you have any issues with ADB/FASTBOOT use my One-Click Installer follow link on signature.
Instructions:
All is automatic using batches provided:
1. Enable Developers options by tapping 7 times on build number on Settings\About Phone\Build Number
2. Connect device to PC and enable developer options when prompted for trusted device check the box and tap OK/Continue
3. Go to XT1095 folder and Run CONVERT_TO_XT1095.BAT let the process finish.
4. When device boot up enable developers options again if needed. Don't worry for the Unknown Baseband Version yet.
5. Go to OTA 5.0 Release folder and run SIDELOAD_OTA.BAT follow instructions on batch.
5. When device finish proccess and boot up go to step 6.
6. Go to MODEM_AMXPR and run FlASH_CLAROPR_MODEM.BAT to restore Stock Modem from Claro and get signal. go to step 7.
7. To get rid of Bootloader Unlock Warning at boot go to folder LOGO and run FLASH_LOGO_NO_WARNING.BAT let it finish and enjoy Lollipop.
Note: You can receive Moto X Pure Edition OTA's now as long as you are not rooted or modified BUT after installing them you need to run step 7 again to flash back Claro Puerto Rico modem.
to go back to Full Stock from Claro run Batch on folder AMXPR_XT1097 and you are back to full Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download RAR: MEGA
Since sbf droid dev site is down, Here is my collection of Moto X 2nd Gen firmwares. Enjoy.
https://mega.co.nz/#F!hlUgjCCT!WybvLAs1RPWDyPupB7kEug
Great guide man! thanks. I supposed this works for the Claro Chile version, right?
titotito1983 said:
Great guide man! thanks. I supposed this works for the Claro Chile version, right?
Click to expand...
Click to collapse
You need to replace the AMXPR firmware with your region one. Copy paste modem and sfg.bin from your firmware to the modem folder also. And it works.
Omar04 said:
You need to replace the AMXPR firmware with your region one. Copy paste modem and sfg.bin from your firmware to the modem folder also. And it works.
Click to expand...
Click to collapse
Great! thanks again!
titotito1983 said:
Great! thanks again!
Click to expand...
Click to collapse
When replacing files with the ones from your region pay attention if your firmware system image files are sparse chunks or system.img if the latter edit script and delete all "fastboot flash.... sparsechunk.x" commands there are 5 from 0 to 4 and add this one instead "mfastboot flash system system.img" and save it.
Omar04 said:
When replacing files with the ones from your region pay attention if your firmware system image files are sparse chunks or system.img if the latter edit script and delete all "fastboot flash.... sparsechunk.x" commands with "mfastboot flash system system.img"
Click to expand...
Click to collapse
All right! thanks again man
Nextel Brazil
Hi Omar04,
The rom "NIIBR_XT1097_4.4.4_KXE21.187-30.3_cid12_CFC.xml.zip" works on a Moto X 2014 2nd generation BRAZIL? If this works, I need to do something else at the time of flashing the rom? Thanks.
Claro chile
thanks everything went perfectly
Lucas.s.santos94 said:
Hi Omar04,
The rom "NIIBR_XT1097_4.4.4_KXE21.187-30.3_cid12_CFC.xml.zip" works on a Moto X 2014 2nd generation BRAZIL? If this works, I need to do something else at the time of flashing the rom? Thanks.
Click to expand...
Click to collapse
AFAIK you can use any Moto X 2nd Edition Brazil or XT1095 ROM as long as you use the correct baseband.
Thanks
How can I modify the procedure to work on Wind Mobile version of the phone from Canada.
Thanks
@Beast11
There's also numerous stuff in the att 1097 thread and the telus 1097 thread. I'm on telus and followed this guide. Super easy. Just time consuming
http://forum.xda-developers.com/showthread.php?t=2972693
(GUIDE) XT1097 to XT1095 Nextel and others.
Sent from my XT1095 using Tapatalk
proper69 said:
@Beast11
There's also numerous stuff in the att 1097 thread and the telus 1097 thread. I'm on telus and followed this guide. Super easy. Just time consuming
http://forum.xda-developers.com/showthread.php?t=2972693
(GUIDE) XT1097 to XT1095 Nextel and others.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Wow... completely missed that. Thanks!
Beast11 said:
How can I modify the procedure to work on Wind Mobile version of the phone from Canada.
Thanks
Click to expand...
Click to collapse
You can use it on any Moto X 2nd Edition device you only need to replace AMXPR folder contents with your carrier firmware files. And put a copy of your carrier firmware modem files on the modem folder to replace with yours too.
Pay attention to firmware if it's using system as sparsechunks don't need to edit batch.
This is the official indian OTA captured for Dual sim variant XT1068
Copy this zip to internal storage..Goto Settings and check for updates...An Update should popup...install and enjoy
PLEASE GO THROUGH FAQ'S BEFORE YOU POST SOMETHING!!!
NOTE:If Internal storage doesnot work copy to SD card if you have one and then check for update.If both didn't workout try installing the update using stock recovery!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an official ROM for Moto G XT1068, was released to Indians during the SOAK testing program!
Here is a video on how to install this update..This is made by my friend Manohar..A big thanks to him.
Link: https://www.youtube.com/watch?v=2IG6E0KvUwg
Please Subscribe to his channel for more videos like this...and please do like the video...Hope you guys like it
Download:
MEGA LINK 1 :https://mega.co.nz/#!31MxzbgB!qRfXchh9FfOOliKnenY2uRyDGyCW5URCpKG78jxsbIw
MEGA LINK 2:
https://mega.co.nz/#!DNsiCahK!gIIsAX4HA8K8NKdEl_0N6xINzyRSvmm8OHCwmquTpgg
DEV HOST LINK:
http://d-h.st/PEof
Credits:
1.Rajesh Kumar https://plus.google.com/100861612655091584827/posts
2.Avinash Ravi https://plus.google.com/+AvinashRavi/posts
FAQ's:
1. Whether unlocked bootloader is required for the update?
Ans: No need to unlock the bootloader.....you can install the update with locked bootloader
2. Whether updating will void warranty?
Ans: As there is no need to Unlock the bootloader it will not void the warranty
3. Whether future OTAs will be received after applying this update?
Ans: Yes you will get future updates from Motorola after installing this update
4.Which version supports this update?
Ans: This Update currently works only with XT1068 model with system version "21.11.23.titan_retaildsds.retaildsdsall.en.03" and build number "KXB21.85-23".If you are having XT1068 other than this system version kindly refer to http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295
5.Will this Update work with XT1068 UK Varient?
Ans: FOR UK MODEL:Update your UK XT1068 to .23 DSDS ALL firmware ( firmware b) from here:http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295
Place the update zip in your internal storage...go to settings check for updates....Update will popup....Hit install...Phone will be updated - this will change bootloader / modem etc (so dont do unless you sure you want to be on 5.0.2).confirmed both UK sims work and dial out fine.
PLEASE DONT FORGET TO HIT THANKS
Anyone who updated to lollipop pls post screen shot
Sent from my XT1068 using XDA Free mobile app
mannulko said:
Anyone who updated to lollipop pls post screen shot
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
Well i have a custom ROM with android 5.0 want some screenshots of them?
No i need screenshots of official rom
Sent from my XT1068 using XDA Free mobile app
Does it have portuguese from Portugal language? Thanks in advance. Btw, should i install this over wich version of KK? .23 or .27 ?
Edit: dont know for sure, but the bootloader get updated with this ota?
Sent from my XT1068/69 using XDA Free mobile app
Thanks ravi
Interesting... tanks!
ravi.avancha said:
This is the official indian OTA captured today for Dual sim variant XT1068
Copy this zip to internal storage and check for update...install and enjoy
This ROM is an official Moto G XT1068, was released to Indians the SOAK testing program!
Download:https://mega.co.nz/#!31MxzbgB!qRfXchh9FfOOliKnenY2uRyDGyCW5URCpKG78jxsbIw
Credits:
1.Rajesh Kumar https://plus.google.com/100861612655091584827/posts
2.Avinash Ravi https://plus.google.com/+AvinashRavi/posts
Click to expand...
Click to collapse
Please link the stock firmware needed to apply this OTA
Thanks
luisjoseb said:
Please link the stock firmware needed to apply this OTA
Thanks
Click to expand...
Click to collapse
This update is exclusively for XT1068 Varient please dont try this on other models
ravi.avancha said:
This update is exclusively for XT1068 Varient please dont try this on other models
Click to expand...
Click to collapse
Yes I know, but this need to be appliaded over certain firmware in 4.4.4, wich build or release, for example RETLA_XT1068_4.4.4_KXB21.85-24
luisjoseb said:
Yes I know, but this need to be appliaded over certain firmware in 4.4.4, wich build or release, for example RETLA_XT1068_4.4.4_KXB21.85-24
Click to expand...
Click to collapse
Applied over this: http://www.mediafire.com/download/wmj61ot51011ccf/RETAILDSDSALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml.zip
ggunzio said:
Does it have portuguese from Portugal language? Thanks in advance. Btw, should i install this over wich version of KK? .23 or .27 ?
Edit: dont know for sure, but the bootloader get updated with this ota?
Sent from my XT1068/69 using XDA Free mobile app
Click to expand...
Click to collapse
love to know that also...
plz cn anyone upload it to google drive or d-h.st??? plz
Anyone please upload to google drive and post link here.....im not at home
Cool, tnks Man... M on it:good:
Hey, I am new to all this. I am downloading this right now. After I place it in my internal storage and install, will I get any issues?
This may be a nooby question, but I don't want to brick my device. Thanks in advance. If I manage to install this, I will post screenshots.
Sri2702 said:
Hey, I am new to all this. I am downloading this right now. After I place it in my internal storage and install, will I get any issues?
This may be a nooby question, but I don't want to brick my device. Thanks in advance. If I manage to install this, I will post screenshots.
Click to expand...
Click to collapse
Just copy to your internal storage...go to settings check for updates...install it and enjoy....No it wont brick your device its an official update from Motorola....Make sure your model is XT1068(indian model) before you proceed!!
ravi.avancha said:
Just copy to your internal storage...go to settings check for updates...install it and enjoy....No it wont brick your device its an official update from Motorola....Make sure your model is XT1068(indian model) before you proceed!!
Click to expand...
Click to collapse
Yes, mine is XT1068 and running 21.11.23 on KitKat 4.4.4 Were you on the same one as well?
Also, one more question, aren't the files named with the previous system version? If you renamed it for our ease, then thanks!
This OTA doesn't work for the european xt1068, it's only for the indian and I think brazilian also.
When you try to push the update through recovery it gives an error saying that it needs to be installed over 4.4 or 5.0 from india.
GUYS im Uploading it to google drive will post the link with in an hour
Just got a little surprise when I woke up today. Checked my notifications and Pushbullet had advised about some new apps posted in APKMirror. The most important of all is an update for MotorolaOTA, which probably means they're going to do a major rollout of Lollipop soon. Hopefully.
Here are the the links for downloading the apps. The website is safe, by the way. I'm installing everything right now, it's all working as it should.
Motorola Gallery 304100
Motorola Camera 5.0.7.1
Motorola Help 1.4.32
Motorola Update Services 7.0.1
Motorola Contextual Services 5.18.063
Motorola Migrate 1.6.0.30
Moto 2.2.8 (NOT INSTALLING)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using a XT1063 on Brazil. No updates so far as of 11am local time. I can't even wait anymore.
I'm using a XT1068, Brazil também.
I installed the Camera, Contextual Services and the Motorola Update Services, no update yet. =/
Hopefully we'll get it still this week.
Crossing fingers here
What is the purpose of Contextual Services?
godoy.rafa said:
What is the purpose of Contextual Services?
Click to expand...
Click to collapse
I believe its something about OTAs, because they updated the same service before rolling the first soak test for 5.0
Just so you know, if you don´t mind having your bootloader unlocked, you can have the oficial OTA right now.
Moto app is not installing because it's only for Moto X.
Hopefully these updates mean that there'll be a major rollout in the next few days.
Sent from my XT1068 using XDA Free mobile app
I see they've updated camera apk.
Maybe camera api v2?
Ladybug's been patched
guguts said:
I believe its something about OTAs, because they updated the same service before rolling the first soak test for 5.0
Just so you know, if you don´t mind having your bootloader unlocked, you can have the oficial OTA right now.
Click to expand...
Click to collapse
Is it the same version as the twrp backups? I'm on 5.0.2 restored from a twrp backup...
No. The link i posted is for the oficial OTA, requires stock firmware and stock recovery.
Its not a twrp backup.
Been using it for almost 2 days now and só far so good.
Battery is lasting a lot longer than it was in the 5.0 twrp backup i was using before.
Sent from my XT1069 using XDA Free mobile app
Does anyone received the updates through Play Store?
I received update to Motorola migrate in Google play store. I'm from Poland
Send by Moto G2 xt1068
I also received, but only for Motorola Migrate. I am from Germany. The other apps haven't received an update yet.
I don't think so,, they have updated it for compatibility isusses and little bit graphics change ,its all due for global moto Lolipop release .,, as far as Moto G camera 2 api ,, it doesn't and willnot support many features of camera 2 API,, there other application like L Camera and Manual camera don't support Moto G even with 5.0.2
[email protected] said:
I don't think so,, they have updated it for compatibility isusses and little bit graphics change ,its all due for global moto Lolipop release .,, as far as Moto G camera 2 api ,, it doesn't and willnot support many features of camera 2 API,, there other application like L Camera and Manual camera don't support Moto G even with 5.0.2
Click to expand...
Click to collapse
Camera v2 wasn't implemented on Moto yet. The only known device is Nexus 5 for now.
Can anyone upload the moto contextual services 5.18.063 again? I can not download it from the above link…Great thanks
Sent from my XT912 using XDA Free mobile app
Links are broken
Enviado desde mi XT1063
All End,,,,Close this thread
estape11 said:
Links are broken
Enviado desde mi XT1063
Click to expand...
Click to collapse
Latest News is that Motorola has blocked all the links and asked APK mirror to remove all the apps ,,(bad move by Moto,,they cutting same hands which feed them). Its doesnot make any sense to contoinue this thread. We will get it now when Moto officially release it Playstore.
https://plus.google.com/+ArtemRussakovskii/posts/1zQKKpUTLQK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The wait is over, now I am offering to you the Motorola official Lollipop 5.1 for the MOTO G 4G Peregrine!
This ROM is an official Moto G 4G, the file was captured during the OTA update!
Special Thanks by capturing the OTA: Antonio Diogo Junior/Raphael vikking
NOTE: You do not need unlocked bootloader. Functional in linked unit.
No user liable for any damage that may occur to your phone. Do so at your own risk.
>> Requirements:
- Being in the ROM 4.4.4 Stock and Stock Recovery.
- System Version 21:11:56! To check go to Settings> About phone.
- ZIP OTA 5.1 Moto G 4G.
- Battery with at least 60% charged.
IIf your system version is not 21:11:56
May be to give error, just make KK 4.4.3 downgrade: https://mega.co.nz/#!FFZQkTSJ!lW6LmkYbgQ-oO9b-Q7t2KN9CMLTRaeP1oKaa1PQXtmQ
Then download via OTA 4.4.4
Download the ZIP Lollipop 5.1 Moto G 4G RETAIL:
Option 1: https://mega.co.nz/#!MAxEDBab!udqI61zisFqpdv8dAGzjOj2CUksdT5BBXmpwR4elDeo
Option 2: https://mega.nz/#!CJI0lbxK!udqI61zisFqpdv8dAGzjOj2CUksdT5BBXmpwR4elDeo
After conforms to the above requirements, Let's get started!
>> TUTORIAL:
1. Place the Zip 5.1 file in the root of your phone or in internal memory.
2. Restart your phone and enter bootloader mode by pressing the Power button + Volume Less for about four seconds and release then will open an options menu.
3. Now with Less Volume scroll down to the recovey option and press the volume More button.
4. Wait until a fallen little robot, when it appears press the Volume button + More Power button for about 10 seconds then will show the recovery options.
5. Now with the files in the device's internal memory down with less volume button and select the APPLY UPDATE FROM SDCARD option, now look at the ZIP file of the update and select it.
Now just wait for the update process to be finalized.
PRINT PEREGRINE Lollipop Android 5.1:
If you liked your like and comment
Note: if you flash this and you don't have the Brazil variant of this phone, you're gonna have a bad time.
You will have a bricked phone.
gr3ud said:
And why can´t you post that in the Firmware thread ?
This has nothing really to do with development ?
I guess you are not an Motorola official right, or in any case related to Motorola, to bring us fixes or tell them what´s not working and so on ?
If every country get its OTA and you make for every OTA an own thread... how pointless is that ?
No offense but this section is for custom ROM development mainly and not just for simple firmware updates without active support, IMO ^=^
Click to expand...
Click to collapse
It's better than talking about this in CM12 thread like they were. I find that extremely disrespectful. You get somebody willing to put that much work into our device and then people like this were posting in his thread with instructions on stock 5.1, which will be crap regardless. You can upgrade a turd all you want, it will still be a stock turd.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 14.1 (5.1.1) 5/24 build
Carrier: Cricket Wireless
Travisholt92 said:
It's better than talking about this in CM12 thread like they were. I find that extremely disrespectful. You get somebody willing to put that much work into our device and then people like this were posting in his thread with instructions on stock 5.1, which will be crap regardless. You can upgrade a turd all you want, it will still be a stock turd.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 14.1 (5.1.1) 5/24 build
Carrier: Cricket Wireless
Click to expand...
Click to collapse
Stock turd, LMAO xD
And wth ? my comment got deleted ? wtf ? free speech / opinion ´n whatnot ? c´mon don't be childish whoever did this, guess a little critisim does not hurt at all lol, kids those days pfff
in recovery xt 1039 can`t install and aborted
Is it possible to do a twrp backup and flash it to a xt1045?
hotbld5 said:
Note: if you flash this and you don't have the Brazil variant of this phone, you're gonna have a bad time.
You will have a bricked phone.
Click to expand...
Click to collapse
You won't have a bricked device (The firmwares, between the XT1039, XT1040 etc. seem to be interchangable), the modem of the device won't work however. Meaning that whatever variant of the peregrine (aside from the XT1040) you flash this on, you'll only have WiFi functional
Here's the link to the 21.31.1 update:
https://mega.co.nz/#!el9WybTK!_8sRSLp_GrA4qa5Yc8fIDkZ1_9PRA7m92wXR6uKT-yo
No need to downgrade to 4.4.3 and OTA to 4.4.4 for those that already are on 4.4.4 21.31.1
Credits to Unkn0wn from Tudocelular
VVieira said:
Here's the link to the 21.31.1 update:
https://mega.co.nz/#!el9WybTK!_8sRSLp_GrA4qa5Yc8fIDkZ1_9PRA7m92wXR6uKT-yo
No need to downgrade to 4.4.3 and OTA to 4.4.4 for those that already are on 4.4.4 21.31.1
Credits to Unkn0wn from Tudocelular
Click to expand...
Click to collapse
Hey, my phone is on 4.4.4 21.31.1 but it's EU and not Brazil version. I can installed this without any problem ?
? Why not, just waiting for the Official update ???!!
Smokey Mc Pot said:
Why not, just waiting for the Official update ???!!
Click to expand...
Click to collapse
because this is XDA!
cpvm said:
because this is XDA!
Click to expand...
Click to collapse
...and?!
Smokey Mc Pot said:
...and?!
Click to expand...
Click to collapse
Because most of us like to try new roms , kernels and we know the risk that we can brick our devices .
And has anyone tried any root methods on this?
Someone have a answer for me ? I want know if I can installed this rom on the Moto G 4.4.4 EU
same question !!!!!
!!!!!!!!!!
Valbon said:
Someone have a answer for me ? I want know if I can installed this rom on the Moto G 4.4.4 EU
Click to expand...
Click to collapse
oma89 said:
!!!!!!!!!!
Click to expand...
Click to collapse
No, You can´t.
For install this OTA you need the Brasil Stock Rom. I say it for experience, the instalation will be abort if you intall on another rom No Brasil retail
Ok thank you
Is it possible to install it on XT1033 (Brazilian 3G version)?
5.0.2 is pretty bad on mine.
htc desire
New Update received this morning (about 188Mo)
Someone knows what's new inside ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, a security update, it says so in the description
It brings it up to date to the august security bulletin, see https://www.reddit.com/r/MotoX/comments/58a1hf/moto_x_2014_eu_retail_august_security_update/
I wonder if this update resolves the Bluetooth issues, had chance to test anything? At 188mb I cant see this only covering a few months of security updates.
I hope that it has some bugfixes.
Enviado desde mi XT1095 mediante Tapatalk
Why i not receive update ?
netokee said:
New Update received this morning (about 188Mo)
Someone knows what's new inside ?
View attachment 3911492
View attachment 3911493
Click to expand...
Click to collapse
I've gotten the same update, in the same country. It just brings the August security patch to your phone, but the system remains under 6.0 Marshmallow.
Sent from my XT1092 using XDA-Developers mobile app
Any link available for the factory image?
XMoDuLeSx said:
Any link available for the factory image?
Click to expand...
Click to collapse
Yes pls...xt1092 or 1095 if there is one..thanks..
Sent from my XT1097 using Tapatalk
Extremely slow...
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100
Looks like files were moved around:
Another one for RETCA -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETCA/
TMO RETUS -7
https://mirrors.lolinet.com/firmware/moto/victara/official/TMO/
RETBR -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETBR/
Now also RETES, RETMX, AMXPR (?)
Gus Ghanem said:
Extremely slow...
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100
Looks like files were moved around:
Another one for RETCA -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETCA/
TMO RETUS -7
https://mirrors.lolinet.com/firmware/moto/victara/official/TMO/
RETBR -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETBR/
Click to expand...
Click to collapse
Thanks mate...but i have retail brasil with cid 12, is it possible to flash firmware with lower cid? Thanks
Sent from my XT1097 using Tapatalk
so no 6.0.1 yet right?
Did anyone capture the OTA link?
http://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
pepexzz said:
so no 6.0.1 yet right?
Click to expand...
Click to collapse
Yes, still 6.0
Sent from my GT-N8013 using XDA-Developers mobile app
demonshouter said:
Thanks mate...but i have retail brasil with cid 12, is it possible to flash firmware with lower cid? Thanks
Sent from my XT1097 using Tapatalk
Click to expand...
Click to collapse
I think you can flash any Victara XT109x firmware on a Moto X 2014 (as long as you don't downgrade the bootloader or partition table), but you may need the modem/baseband for your region/carrier.
Again UK xt1092 left out?
where can i get the root boot for the last update for xt1092?
Thanks
Pff this is the second time the update screen says "6.0.1" and it turns out to be 6.0.0. I'd love to get 6.0.1 because it fixes the delay between selecting text and the options dialog popping up AND new emojis (I'm seeing a lot of [X]'s in posts and comments these days..). Oh well. Guess I'm going to block the Moto Update Services app for now, check back in a few months..
Just wanted to drop a link to the OTA that I copied from my device:
https://stor4ge.rejh.nl/_stored/var...ictara_reteu.reteuall.en.EU-from-24.201.3.zip
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
UPDATE: Here's the Mega link:
https://mega.nz/#!gQVwmZ4S!pD0j-elzbekPEJv--LIe9c20EkXxNM9wEzad1iu8jfY
Cheers
Rejh said:
Just wanted to drop a link to the OTA that I copied from my device:
https://stor4ge.rejh.nl/_stored/var...ictara_reteu.reteuall.en.EU-from-24.201.3.zip
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
UPDATE: Here's the Mega link:
https://mega.nz/#!gQVwmZ4S!pD0j-elzbekPEJv--LIe9c20EkXxNM9wEzad1iu8jfY
Cheers
Click to expand...
Click to collapse
Thank you! :good:
Downloaded, rebooted to stock recovery, update from sd card and done. Working great XT1092 reteu retin
Rejh said:
Just wanted to drop a link to the OTA that I copied from my device:
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
Cheers
Click to expand...
Click to collapse
thanks. How to install it?