Database Users

[Need help]Rooting moto g4 plus in stock june security patch level.

I want to root my moto g4 plus(unlocked bootloader and twrp flashed). Anyone knows how to root moto g4 plus. And i also want to know that how to increase battery backup after rooting(is it a myth).

@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..

____Mdd said:
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
Click to expand...
Click to collapse
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.

ADITYA_KUMAR said:
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
Click to expand...
Click to collapse
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.

The first time, you must open TWRP from the bootloader directly or the recovery gets overwritten.
For rooting, you can flash Magisk instead of flashing SuperSu. Other steps remain exactly the same.

____Mdd said:
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
Click to expand...
Click to collapse
When i booted into recovery mode. It shows no command.

ADITYA_KUMAR said:
When i booted into recovery mode. It shows no command.
Click to expand...
Click to collapse
That's stock Recovery, you need to flash TWRP again.

____Mdd said:
That's stock Recovery, you need to flash TWRP again.
Click to expand...
Click to collapse
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.

ADITYA_KUMAR said:
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
Click to expand...
Click to collapse
Did you flashed TWRP and with the next command booted immediately into twrp?

strongst said:
Did you flashed TWRP and with the next command booted immediately into twrp?
Click to expand...
Click to collapse
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.

ADITYA_KUMAR said:
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
Click to expand...
Click to collapse
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...

baunthiyal said:
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
Click to expand...
Click to collapse
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?

Yes
ADITYA_KUMAR said:
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Click to expand...
Click to collapse
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.

baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
I need to root my stock nougat( june version).What should i do after that.

I'll tell you what I did.
1. Flash Elemental Ex kernel. https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
2. Flash Magisk. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.

ADITYA_KUMAR said:
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
Click to expand...
Click to collapse
Try commands,
fastboot oem fb_mode_set
fastboot flash recovery name.img
Fastboot oem fb_mode_clear
Then directly boot into recovery,
Then again boot into recovery through twrp itself (there is option for it in reboot) or try anything.

Thank you guys i successfully rooted my moto g4 plus(xt1643)

Lenovo K6 without OS

Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.

Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
TWRP: https://dl.twrp.me/karate/twrp-3.1.1-1-karate.img
Gapps: http://opengapps.org/ (ARM64)

J.D.M said:
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
Click to expand...
Click to collapse
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.

Crolys said:
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Click to expand...
Click to collapse
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem. Remembering that in the site https://dl.twrp.me/karate/ has two versions of TWRP, the version twrp-3.1.1-0-karate.img is 32bits and the version twrp-3.1.1-1-karate. img is 64bit.

J.D.M said:
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem.
Click to expand...
Click to collapse
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now

Crolys said:
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Click to expand...
Click to collapse
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.

Crolys said:
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Click to expand...
Click to collapse
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.

got same 255 error,just now i reflashed stock rom and issue resolved

vasu009 said:
got same 255 error,just now i reflashed stock rom and issue resolved
Click to expand...
Click to collapse
how did you reflashed the stock rom, please reply cause im stuck with the twrp and unable to do it. my phone doesn't have an os now

what s the password of the trwp

J.D.M said:
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
Click to expand...
Click to collapse
Can install this ROM on any Lenovo K6 Power device ??

dushd95 said:
Can install this ROM on any Lenovo K6 Power device ??
Click to expand...
Click to collapse
Yeah

J.D.M said:
Yeah
Click to expand...
Click to collapse
It says device not supported why??

Dont forget to reboot again into twrp - after flashing 64bit twrp . This is a step that is very important if you will not reboot your phone into twrp after flashing 64 bit twrp then , it will keep showin you the error 255.
So check that .

wacccim said:
what s the password of the trwp
Click to expand...
Click to collapse
Go for 3.2.1.0 it is better then 3.1.1.1 in 64 bits it ain't ask password i use it to flash all roms

Tere 3.1.1-1 asking for password to encrypt data
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:

Erase the data
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
Use erase the data from wipe option then you will be able to install rom and g-apps.
Every time you will need password, I don't know why but after erasing data you install all files otherwise you need to erase data again and again

Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
I Faced same problem. It's ok that your phone is in weird state for time now. And also possible to recover.
Hopefully you have adb-tool, custom-rom & gapp, twrp.img on your PC.
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
fastboot oem reboot-recovery
3)Wait for mobile to boot in to recovery mode with TWRP
Now need to flash custom-rom followed by gapps installion.
I) You can use pendrive with otg to flash custom-rom followed by gapps
OR
II)You can use phone storage/SD card to flash the custom-rom followed by gapps
OR
III)adb sideload command as fallow
a)In TWRP recovery on mobile, goto Adavanced->ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify custom rom path inside ""
adb sideload "C:\adb\images\MyCustomROM.zip"
Have a patience to complete the operation.
Click back for Adavanced Menu again.
b) Select ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify Gapp path inside ""
adb sideload "C:\adb\images\open_gapps-arm-7.1-pico-20180611.zip"
c)Have a patience to complete the operation.
Once complete go to TWRP Screen.
d)Now go back TWRP main menu & select wipe->format Data.
Go to Reboot->system.
How to install TWRP if no OS there
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
a) To check the device is connected to PC or not
fastboot oem device-info
b) To flash the recovery. Give twrp path inside the ""
fastboot flash recovery "C:\adb\images\twrp.img"
c) To boot into recovery mode
fastboot oem reboot-recovery
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
In my case, It worked with PIN.

[Help] Install TWRP ZE552KL

Hello everyone!
I'm trying to root in my Zenfone 3 (ZE552KL) but I'm not getting it and I decided to come and ask for your help
Follow this tutorial step by step
https://forum.xda-developers.com/zenfone-3/help/guide-how-to-root-zenfone-3-ze552kl-t3471524
I did all the steps successfully and there was nothing "strange", in step 5 of the guide it tells you to access the recovery mode of TWRP but when I access the recovery mode I just get into the recovery mode of Android and not the TWRP.
Anyone have any idea what might be happening? When I installed TWRP it was all normal, no error message or failed.
Thank you.

raitos said:
Hello everyone!
I'm trying to root in my Zenfone 3 (ZE552KL) but I'm not getting it and I decided to come and ask for your help
Follow this tutorial step by step
https://forum.xda-developers.com/zenfone-3/help/guide-how-to-root-zenfone-3-ze552kl-t3471524
I did all the steps successfully and there was nothing "strange", in step 5 of the guide it tells you to access the recovery mode of TWRP but when I access the recovery mode I just get into the recovery mode of Android and not the TWRP.
Anyone have any idea what might be happening? When I installed TWRP it was all normal, no error message or failed.
Thank you.
Click to expand...
Click to collapse
When you received dm verity message at boot, volume up or down -> choose recovery. You will access to twrp

[email protected]@ said:
When you received dm verity message at boot, volume up or down -> choose recovery. You will access to twrp
Click to expand...
Click to collapse
It is exactly there that I am in trouble, when I choose the "recovery" option my cell phone reboots, but Recovery Android appears and not the TWRP

raitos said:
It is exactly there that I am in trouble, when I choose the "recovery" option my cell phone reboots, but Recovery Android appears and not the TWRP
Click to expand...
Click to collapse
Reflashing twrp pls.

[email protected]@ said:
Reflashing twrp pls.
Click to expand...
Click to collapse
Sorry, but how can I "reflashing"?
I've already tried reinstalling TWRP and it always gives the message that everything worked out

raitos said:
Sorry, but how can I "reflashing"?
I've already tried reinstalling TWRP and it always gives the message that everything worked out
Click to expand...
Click to collapse
Download lastest TWRP, using fastboot command 'fastboot flash recovery twrp-3.x.x....img' and wait for it flash.

[email protected]@ said:
Download lastest TWRP, using fastboot command 'fastboot flash recovery twrp-3.x.x....img' and wait for it flash.
Click to expand...
Click to collapse
Unfortunately I've already performed this procedure countless times and the command prompt always says the operation was a success

raitos said:
Unfortunately I've already performed this procedure countless times and the command prompt always says the operation was a success
Click to expand...
Click to collapse
TWRP flashed success but don't show, weird. May be you flash wrong twrp of Z017D your device is Z012D.

Twrp download

raitos said:
Unfortunately I've already performed this procedure countless times and the command prompt always says the operation was a success
Click to expand...
Click to collapse
have you enabled usb debugging from developer options?

Same problem.
I flashed twrp so many times successfully, but stock recovery persists each time.
(usb debugging on).

I've had that a couple times. After flashing twrp in fastboot, type "fastboot boot twrp.img" where twrp.img is the recovery image you just flashed.

raitos said:
Hello everyone!
I'm trying to root in my Zenfone 3 (ZE552KL) but I'm not getting it and I decided to come and ask for your help
Follow this tutorial step by step
https://forum.xda-developers.com/zenfone-3/help/guide-how-to-root-zenfone-3-ze552kl-t3471524
I did all the steps successfully and there was nothing "strange", in step 5 of the guide it tells you to access the recovery mode of TWRP but when I access the recovery mode I just get into the recovery mode of Android and not the TWRP.
Anyone have any idea what might be happening? When I installed TWRP it was all normal, no error message or failed.
Thank you.
Click to expand...
Click to collapse
May be your bootloader didn't unlocked successfully or you flashed a wrong version of twrp.

i've had the same issue as you at first. but when i click on reboot system on the stock recovery. it is now accessing the twrp recovery, but the problem is i cant boot my system technically i got a bootloop lol

raitos said:
Hello everyone!
I'm trying to root in my Zenfone 3 (ZE552KL) but I'm not getting it and I decided to come and ask for your help
Follow this tutorial step by step
https://forum.xda-developers.com/zenfone-3/help/guide-how-to-root-zenfone-3-ze552kl-t3471524
I did all the steps successfully and there was nothing "strange", in step 5 of the guide it tells you to access the recovery mode of TWRP but when I access the recovery mode I just get into the recovery mode of Android and not the TWRP.
Anyone have any idea what might be happening? When I installed TWRP it was all normal, no error message or failed.
Thank you.
Click to expand...
Click to collapse
First of all, flash TWRP recovery via FASTBOOT
Commands: flash recovery xxx.img
After flashing, type this: fastboot reboot (hold volume down on your ZenFone 3)
When the dm-verity message pops out, release volume keys and don't touch anything. TWRP will boot up.

I have the same issue. did u solve it?

killerarora said:
I have the same issue. did u solve it?
Click to expand...
Click to collapse
Same issue here. Anyone solve this?

[SOLVED]My Moto G5 Plus boot into recovery mode after i flashed Security Patch

FIXED, Just type this adb command when you are in recovery mode....
Code:
adb shell dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Click to expand...
Click to collapse
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:

BunnyHoo said:
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:
Click to expand...
Click to collapse
I have the same problem when i select factory mode on bootloader then the phone starts only...
Otherwise it boots into twrp recovery

I have the same problem. Only boots into system via bootloader.
Otherwise it boots into twrp recovery.
After successfully booting into system it told me "system update failed".
I guess its because the system update routine is to be flashed via stock recovery and therefore its booting into recovery until it is flashed? Just guessing, but if so could I just flash the update manually?
Thanks in Advance :good:

same here, ps. thanks for the tip of boatloader !!

bubo23 said:
same here, ps. thanks for the tip of boatloader !!
Click to expand...
Click to collapse
np, i still w8 for a solution!, i try some methods but not seems to work

Xt1687 here - same issue. Can I get confirmation that flashing the stock firmware fixes it?

Sorry if I'm wrong you cannot update when bootloader unlock ,have to wait some one make a fash zip so we can fash on twrp

Same here, I have to go to Mount then check System and then Reboot, Bootloader and finally Start. It's very annoying. I tried some ADB commands but nothing seemed to work.

Update: So I got annoyed enough by it to finally flash a different rom, wiped /data /system /cache and installed
Cosmic-OS 3.1 Universe but still can only boot via bootloader...
Any suggestions? Do I have to reformat the whole phone in bootloader via Computer?
Thanks in advance :good:

Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65

jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
I'll try bro, thanks.:good:

jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
IT WORKS!!!!, THANKS A LOT!.
Just TYPE FIRST CODE and see the magic!

It worked, thanks for the link!

Hello i have a probleme twrp in my moto g5 plus i unlock bootloader i install twrp but if i want to make a reboot into twrp didnt work . The one methode for reboot into twrp is reboot bootloader and press star , plz i need a solution for normal reboot

[SOLVED]P9 lite - twrp booting failed (remote: 'Command not allowed')

Hello guys,
I wanted to flash recovery, but i can't (as you can see in the picture).
I have unlocked bootloader (i used this method:https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701).
I tried with other twrps, like elite twrp, twrp, and from the quide that i mentiond, that twrp too.
When i enter recovery:
What should i do?

HunXavar said:
Hello guys,
I wanted to flash recovery, but i can't (as you can see in the picture).
I have unlocked bootloader (i used this method:https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701).
I tried with other twrps, like elite twrp, twrp, and from the quide that i mentiond, that twrp too.
When i enter recovery:
What should i do?
Click to expand...
Click to collapse
Hello,
if i'm correct you are still on android 6.x/emui 4.x.
You used SRKTool so why haven't used that tool to flash recovery too ?
It's included in the tool.
You need 3.0.2-0 for your android version.
If you want to flash it with fastboot, when finished
disconnect from pc and manually reboot recovery holding vol+ and power buttons.
Cheers

Dadditz said:
Hello,
if i'm correct you are still on android 6.x/emui 4.x.
You used SRKTool so why haven't used that tool to flash recovery too ?
It's included in the tool.
You need 3.0.2-0 for your android version.
If you want to flash it with fastboot, when finished
disconnect from pc and manually reboot recovery holding vol+ and power buttons.
Cheers
Click to expand...
Click to collapse
I'm on android 7.0, and emui 5.0.
That could caused the problem? When i turn on my phone it says: "Your device has been unlocked and can't be trusted".
Anyway thanks for helping!
**EDIT**
It somehow starterd to working, so sorry for wasting your time.

HunXavar said:
I'm on android 7.0, and emui 5.0.
That could caused the problem? When i turn on my phone it says: "Your device has been unlocked and can't be trusted".
Anyway thanks for helping!
**EDIT**
It somehow starterd to working, so sorry for wasting your time.
Click to expand...
Click to collapse
Aah ok android 7, so the TWRP 3.1.1-1 is fine ...
Maybe you should have tried with
> fastboot reboot recovery and disconnect from the PC.
Anyway you've solved then is ok ...
Greetings

HunXavar said:
**EDIT**
It somehow starterd to working, so sorry for wasting your time.
Click to expand...
Click to collapse
Which TWRP did you manage to install? I have the same problem.

radekg12 said:
Which TWRP did you manage to install? I have the same problem.
Click to expand...
Click to collapse
Android 6 > TWRP 3.0.2-0
Android 7 > TWRP 3.1.1-1
Ensure you have drivers installed in your pc.
Ensure you have OEM unlock and DEBUG USB enabled in developer option.
With fastboot: >>> fastboot flash recovery (name of recovery).img (ensure you put the recovery inside the fastboot folder)
>>> fastboot reboot recovery or shoutdown and reboot holding vol+ and power buttons (until it boots in TWRP).
Done.
Cheers

Thanks. I managed to get it working more przez less. Now i have two recoveries . One accessible while holding vol+ during power up and stock recovery when i press vol+ for 3s on "your device is unlocked and therefore it should not be trusted" screen.