Related
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
saifo11 said:
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
Click to expand...
Click to collapse
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
sasukay said:
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
Click to expand...
Click to collapse
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
saifo11 said:
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
Click to expand...
Click to collapse
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
EFS_Lenovo_A6000.qcn
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
EFS_Lenovo_A6000.qcn does this file need to be flashed
saifo11 said:
EFS_Lenovo_A6000.qcn does this file need to be flashed
Click to expand...
Click to collapse
No, actually I didn't created the zip and I don't know what it contained. But, as the zip name suggests, "modem and stuff", I thought it would contain the modemst1/st2 .bin files; and didn't know what else it would contain. So, you just have to flash the modemst1/st2 files and not any others. But, in case, you lost your IMEI too, after flashing the files; I suggested that thread to help you out with it.
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
the post you provided worked thanks alot
what is this for? will this fix the bad signal on my carbon kitkat rom?
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Hello Sasukay..
Can you pls provide the link for downloading the modem files for lenovo k3 note. Or will this same file fix my network issues??
shamanth_gowda said:
Can you pls provide the link for downloading the modem files for lenovo k3 note.
Click to expand...
Click to collapse
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
sasukay said:
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
Click to expand...
Click to collapse
The link you provided is not opening
shamanth_gowda said:
The link you provided is not opening
Click to expand...
Click to collapse
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
sasukay said:
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
Click to expand...
Click to collapse
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
shamanth_gowda said:
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
Click to expand...
Click to collapse
I have K6 Power (K33A42) and also erased the modemst1 and -st2 parts. Could anybody share his backup of modemst1?
Flashing newest stock ROM did not helped.
Please...
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
doswar said:
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
Click to expand...
Click to collapse
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
mL-7 said:
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
Click to expand...
Click to collapse
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
sasukay said:
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
Click to expand...
Click to collapse
sorry for mistake it's qcn but where I can get drivers
doswar said:
sorry for mistake it's qcn but where I can get drivers
Click to expand...
Click to collapse
Qualcomm USB drivers
Was just a google search away.
sasukay said:
Qualcomm USB drivers
Was just a google search away.
Click to expand...
Click to collapse
Thank you
because of modem update in hydrogen os 2.5 this whole mess starts pls help
Rohanlovely said:
because of modem update in hydrogen os 2.5 this whole mess starts pls help
Click to expand...
Click to collapse
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).
pitrus- said:
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).
Click to expand...
Click to collapse
How u got back the sim 2 working ?
pitrus- said:
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).
Click to expand...
Click to collapse
how do you format the partitions? through TWRP? so steps are, flash oos 3.1 then format the modemst1 and 2?
Rohandd said:
how do you format the partitions? through TWRP? so steps are, flash oos 3.1 then format the modemst1 and 2?
Click to expand...
Click to collapse
Sim 2 start working after that ?? U tried that ?
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse
could you please list out the exact steps you have done to fix your issue?
there are many users who are getting this issue including me.
please list the steps with the links of files you flashed. it would be a great help.
pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2?
Rohanlovely said:
https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2
Click to expand...
Click to collapse
Did you tried with this??
any fix??
ashu01 said:
Did you tried with this??
any fix??
Click to expand...
Click to collapse
My laptop windows crashed after repairing that i will try
Rohanlovely said:
My laptop windows crashed after repairing that i will try
Click to expand...
Click to collapse
can you join this telegram group link
https://telegram.me/joinchat/CbL5zUA-vInKg1B5M8baqQ
Had the same problem
Hi,
Just to give you all a quick background. I was in the same situation as you. Flashed H2OS didn't like the jumpy signal therefore wanted to go back to OOS.
First boot of OOS resulted in no connectivity (no wifi, no data, no Bluetooth). I followed the method above and deleted modemst1 and modemst2 and formatted modemst (all done thru fastboot)
Once I did that I was able to boot into OOS to get the signals. As petris said above, wiping and then booting into the software results in a fresh re-write of those modem partitions.
At this point I factory resetted the OOS software (just to be safe) and also installed the stock recovery (somehow my device wasn't booting into TWRP everytime I installed it).
After the factory reset I checked my IMEI's and saw my IMEI2 as 0. Luckily I don't use slot 2 so getting it to show IMEI wasn't a priority. However my camera wasn't working. Everytime I opened up the camera it would show a black screen for 30 seconds and then close with a message showing "Unknown error"
At this point I tried searching the persist.img file that someone suggested in this thread. I downloaded that from google drive and clean flashed it thru fastboot.
After a reboot I was able to get the camera working again.
So all in all for now everything works as expected. I am on the latest OOS 3.1.0 software and have no intentions of doing anything else until there is fix for IMEI2. I am regularly checking oneplus forums where people like me have esclated the issues. I think on the recognized developers Naman is working for a fix and seeing into this issue.
TLDR : IMEI2 shows 0
ashu01 said:
can you join this telegram group link
https://telegram.me/joinchat/CbL5zUA-vInKg1B5M8baqQ
Click to expand...
Click to collapse
now new is problem started in my mobile telegram guys i able start d 2nd sim in my mobile but now sim 1 imei is 0
Rohanlovely said:
https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2
Click to expand...
Click to collapse
u tried it? works?
lockmunk said:
u tried it? works?
Click to expand...
Click to collapse
I tried and was fine.
First i did full wipe, then flash this zip + any rom and rom started fine.
pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse
I get this error while trying to format modem
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
rajatdixit said:
Hi,
Just to give you all a quick background. I was in the same situation as you. Flashed H2OS didn't like the jumpy signal therefore wanted to go back to OOS.
First boot of OOS resulted in no connectivity (no wifi, no data, no Bluetooth). I followed the method above and deleted modemst1 and modemst2 and formatted modemst (all done thru fastboot)
Once I did that I was able to boot into OOS to get the signals. As petris said above, wiping and then booting into the software results in a fresh re-write of those modem partitions.
At this point I factory resetted the OOS software (just to be safe) and also installed the stock recovery (somehow my device wasn't booting into TWRP everytime I installed it).
After the factory reset I checked my IMEI's and saw my IMEI2 as 0. Luckily I don't use slot 2 so getting it to show IMEI wasn't a priority. However my camera wasn't working. Everytime I opened up the camera it would show a black screen for 30 seconds and then close with a message showing "Unknown error"
At this point I tried searching the persist.img file that someone suggested in this thread. I downloaded that from google drive and clean flashed it thru fastboot.
After a reboot I was able to get the camera working again.
So all in all for now everything works as expected. I am on the latest OOS 3.1.0 software and have no intentions of doing anything else until there is fix for IMEI2. I am regularly checking oneplus forums where people like me have esclated the issues. I think on the recognized developers Naman is working for a fix and seeing into this issue.
TLDR : IMEI2 shows 0
Click to expand...
Click to collapse
Did u get such type of an error:
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
If not just tel me the steps u followed
ashokmor007 said:
I get this error while trying to format modem
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
Did u get such type of an error:
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
If not just tel me the steps u followed
Click to expand...
Click to collapse
Make sure your bootloader is unlocked
rajatdixit said:
Make sure your bootloader is unlocked
Click to expand...
Click to collapse
yes it is unlocked
As promised, the RAW or SERVICE FIRMWARE FOR ZE550KL
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGE/HARM IF YOU FLASHED ANY FIRMWARES FROM THESE LINKS/POST BELOW.
BACKUP YOUR PHONE BEFORE FLASHING ANY FIRMWARE, EVEN IF THE FIRMWARE IS FROM ASUS!!!
BACKUP SCRIPT (PARTITION DUMP UNLOCK) is here:
http://forum.xda-developers.com/zen...de-unlock-bootloader-asus-unlock-app-t3405850
Changes from Android OS revisions, especially concerning encryption, efs, modems, wifi, gps could render corruption in partitions leading to phone failure. Backup always and do it often.
Note that this firmware is different from the usual firmware by Asus. It is used for servicing the phone, it restores ALL partition from factory EXCEPT for IMEI, S/NO, Mac address etc. Google account lock is ACTIVE in this firmware.
The firmware is used by Asus Flash Tool to restore your phone partitions. If by any chance, the restore is not successful using the tool, just unzip the file and flash manually (flashall_AFT.cmd)
You need this firmware if your partitions are totally corrupted (example if you cannot go into fastboot mode). Most of the time, bricked phones can be restored by flashing Asus stock recovery (recovery.img), then stock asus firmware. If that doesn't solve the bricking, then you will need the raw/service firmware.
The links are rare, hard to find, download before it is gone.
[firmware27]WW_ZE550KL_1.17.40.123 ... 04185904-secured-releaseAFT_QC.zip
https://drive.google.com/file/d/0B43Ue6xY9MmdOGxXZ2RRQUJrOWs/view
[firmware27]CSCimage_WW-ZE550KL-ZE600KL-1.21.2.230-fac-eng-20151116-signedAFT_QC.zip
https://drive.google.com/file/d/0B43Ue6xY9MmdY1E3ZGlIaEVOVjA/view
WW_ZE550KL_21.40.1220.1794_rel_user-20160722041335-secured-releaseAFT
cannot find the link anymore, could be from some gsm/russian forums
ORIGINAL SOURCE: got raw/service firmware for other zenfones as well
https://firmware27.blogspot.my/p/update-raw-firmware-asus.html
https://firmware27.blogspot.my/2014/12/file-raw-asus-zenfone.html
@pokipokipxorn
Can you restore the Imei?
I used the fastboot erase modemst1 and modemst2 command and lost my IMEI.
asus phones r crappy, no one ever shared the qcn files on the internet.
u can still recover the imei!!!! do not erase anything anymore!!! coz modemst1 modemst2 backup is stored on fsg & a few other files
backup everything now! using qpst, efs professional etc,
install stock recovery, downgrade to lowest asus stock rom, install as new.
http://gsmsociety.com/showthread.php?t=4329
backup script here
http://forum.xda-developers.com/zen...de-unlock-bootloader-asus-unlock-app-t3405850
WW_ZE550KL_21.40.1220.2179_rel_user-20170803162728-secured-releaseAFT this Firmware link
Firmware:- https://cloud.mail.ru/public/J94j/PKn2RWbwX
Tool:- https://cloud.mail.ru/public/ASP8/Md2VwfBX3
Hello everyone,
These are XT1642 Baseband EMEA Channel Retail Europe dd images.All 48 "by-name" partitions, including modem, modemst1 and modemst2.
I was unfortunately going by my own, trying to restore IMEI code and modem functionality of my first XT1642. I bought a typical phone and made dd images of all partitions.
I then engaged into trying to change IMEI code of my failed set. The best try was done by EFS_Professional_2.1.80_BETA, which I downloaded here from XDA, but I got the error NV_ERR_BAD_SECURITY_MODE.
I then resorted to flashing the dd images. Thinking out of focus as I did (I should have tested only modem images: modem, modemst1,modemst2 and fsg) I flashed images one by one in TWRP, until I felt something went wrong (sure it had to), so I rebooted to find I locked myself out at bootloader.
Bootloader says "oem_locked" and yet fails to boot in any mode: recovery, reset or other.
So this is the inevitable end: I was supposed to leave the phone set dead until a toolbox or a hardware hack come out, since I already tried at repair shops and non exist for Athene.
Now to the juicy parts: I promised myself I post these dd images, not just for modem issues, but for anyone wishing to manipulate XT1642 EMEA RETEU. Maybe these could just help.
The images are taken off MPJ24.23-4.
dd images: Google Drive and MediaFire
EFS Professional 2.1.80 Beta: Google Drive and MediaFire
"Manipulating" the IEMI is illegal.
And wrong because it will hurt another person's phone too, that has that IEMI.
SoNic67 said:
"Manipulating" the IEMI is illegal.
And wrong because it will hurt another person's phone too, that has that IEMI.
Click to expand...
Click to collapse
The partitions described don't contain an IMEI. I guess there is no problem here.
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Hello,
Inside the fastboot ROM file "tissot_images_7.12.19_20171219.0000.00_7.1_d39fa89aaf.tgz" (Nougat 7.1.2) ... in the file "flash_all_lock_crc.bat" for example, these lines appear:
fastboot %* flash modem_a %~dp0images\modem.img || @ECHO "Flash modem_a error" && exit /B 1
fastboot %* flash modem_b %~dp0images\modem.img || @ECHO "Flash modem_b error" && exit /B 1
It seems that the file is called "modem.img", not "NON-HLOS.bin".
May be?
Regards!
PS: Sorry for my English!
i managed to flash all images from fast boot to partitions manually step by step
except something called fsg and persist partitions
which i managed to flash through twrp using dd command via terminal
now it boots but i dont have imei number "says imei number unknown"
and it reboots after less than a minute
i read something about qcn file restore and editing from another mi A1
and that i can edit it to put my imei numbers back
anybody please provide a valid qcn number and how can i restore it
m.hashem said:
i managed to flash all images from fast boot to partitions manually step by step
except something called fsg and persist partitions
which i managed to flash through twrp using dd command via terminal
now it boots but i dont have imei number "says imei number unknown"
and it reboots after less than a minute
i read something about qcn file restore and editing from another mi A1
and that i can edit it to put my imei numbers back
anybody please provide a valid qcn number and how can i restore it
Click to expand...
Click to collapse
if it is under warranty just brick your phone and give it to service centre they will flash it and give you back
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Click to expand...
Click to collapse
i have same problem last night
then i reflash 7.12.19 using miflash 2016.08.30.0
my imei normal again
Wow! The file NON-HLOS.bin is the modem for other Xiaomi phone. May be you use a batch file (flash_factory.bat) for other phone, not Mi A1. Please use Mi Flash with right rom.
this is method not working
bangir said:
i have same problem last night
then i reflash 7.12.19 using miflash 2016.08.30.0
my imei normal again
Click to expand...
Click to collapse
this is method not working
gautamaurya said:
this is method not working
Click to expand...
Click to collapse
What happens if you try to re-flash your modem with the flash_all or flash_all_except_storage scripts from here: https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929 ?
Can you please report, if it works and if should not work, please attach the terminal/ shell outpout of the failed flashing attempt here.
modemst1 and modemst2
hey ... i managed to flash the fastboot rom via miflash via hsusb 9008 mode through miflash tool (run as administrator)
the remainig problem is 2 partitions modemst1 and modemst2
which are dev/block/mmcblk0p14 & 15 respectively
can somebody please send me a backup of modemst1 and modemst2
it's doable via twrp
fastboot boot twrp3.1.1.1.img
advanced
terminal
dd if=/dev/block/mmcblk0p14 of=/sdcard/modemst1.img
dd if=/dev/block/mmcblk0p15 of=/sdcard/modemst2.img
i'll flash them back and edit the imei numbers via hex after qcn backup
thanks everybody
m.hashem said:
hey ... i managed to flash the fastboot rom via miflash via hsusb 9008 mode through miflash tool (run as administrator)
the remainig problem is 2 partitions modemst1 and modemst2
which are dev/block/mmcblk0p14 & 15 respectively
can somebody please send me a backup of modemst1 and modemst2
it's doable via twrp
fastboot boot twrp3.1.1.1.img
advanced
terminal
dd if=/dev/block/mmcblk0p14 of=/sdcard/modemst1.img
dd if=/dev/block/mmcblk0p15 of=/sdcard/modemst2.img
i'll flash them back and edit the imei numbers via hex after qcn backup
thanks everybody
Click to expand...
Click to collapse
I have done some digging in order to assist you to get this fixed. I think I have 2 very hot leads (untested as I don't have any issues with my IMEI):
1. http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/ & http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
2. https://androidmtk.com/use-qualcomm-smartphone-write-imei-tool (looks almost to easy, but worth a try?)
Please report your feedback here
hey bro how to the editting modem1st.img
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
now i dont have any connectivity... signal.. wifi etc..
Click to expand...
Click to collapse
Hello!
I made the same mistake. Is there a way to solve this problem?
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Click to expand...
Click to collapse
Same problem here. Phone doesn't work correctly now. Boots, freezes and reboots. :crying:
persist image problem
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
m.hashem said:
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
Click to expand...
Click to collapse
thank you very much broo my device is fixed freezee and reboots problem
Ok. But what is the persist partition? Someone tried already? Doesn't want to brick my phone completely.
how to the editting qcn file beacuse my imei 0 null please help me editting brother
m.hashem said:
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
Click to expand...
Click to collapse
The freeze and reboot problem is fixed. Thanks. Still one problem. IMEI1 is 0 and IMEI2 is null. Anyone has an idea?
Nordland_ua said:
Hello!
I made the same mistake. Is there a way to solve this problem?
Click to expand...
Click to collapse
Me tooo
Sent from my Mi A1 using Tapatalk
https://www.androidfilehost.com/?fid=673956719939818468
Replace the IMEi with UR Own IMEI . if not it's illegal to use this QCN
Password : testnreport
if you don't know how to change IMEI Using hex editor , try my method . DO NOT use QCN to restore .
(hex and imei provided in order for u to find n replace)
i lost my imei n spent me about 6days n 8 hours per day to find a way to fix it .
actually it's easy to fix the problem .
My own method
1. download the older rom (7.8.23) Link
2. Use flash_all.bat
3.reboot into fastboot mode , erase modemst1 and modemst2 .
fastboot erase modemst1
fastboot erase modemst2
4. reboot
5. go to phone , enter *#*#717717#*#*
6.got to settings enable USB Debugging (ADB)
7. disconnect your phone n connect it back
8.Use WriteDualIMEI(W+G_eMMC) Remember run as administrator , enter your IMEI .
9.if success , go to phone enter *#*#717717#*#* to disable the diag port
10. reboot
Done .