Database Users

Snapdragon Camera: For CM13 on ZUK Z1

Hello!
I've just finished putting '[ROM][6.0.1] Unofficial CyanogenMod 13.0 Nightlies (4K, USB-OTG, OTA, etc)' on my ZUK Z1.
http://forum.xda-developers.com/zuk-z1/orig-development/unofficial-cm13-t3277885
Everything went smoothly, and I have the ROM up and running. However, when I was flashing gApps. I flashed 'Stock' gApps as I didn't want any CM apps since I prefer using Google versions of it.
But in the process, it also removed Snapdragon Camera app from the ROM too. As quoted by MrColdBird:
Yes it's supported in the included Snapdragon Camera, however only at 60fps (50% speed) and up to 1080p. I'm still working on unlocking 120fps (25% speed) and slow motion for 4k.
I cannot post as of now in that thread. So, I cannot request the individual apk file from MrColdBird. I have looked around and while I can find Snapdragon Camera apk file (mostly 2.0 version), it requires a bit too many steps (including going through TWRP, applying permissions and so on) just to install an apk.
So, either I flash the ROM again and this time, flash different gApps to keep Snapdragon Camera (which means I'll start all over again since I've already setup my device). Or there is any other simpler way of just flashing a zip without having to deal with permissions, moving files around?
Any help would be appreciated.

Good project! Thanks! Will keep an eye on this thread..
EDIT. Answering your question, I am almost sure u can edit update-script inside flashable so it fixes proper permissions after flashing the snapdragon camera and its libs.

Hello!
I found this little gem buried in the thread '[APP] Snapdragon Camera v2.1'
Credits to Einstein67 who made a flashable zip file for automatic installation.
https://mega.nz/#!VB80iRIS!aEwJWFxkR...g_EL9uhASgtGqQ
I'm going to try it right now. Oh and also, the Google Camera app is pretty glitchy and doesn't work most of the time if anyone is wondering.
--
It doesn't work. Fails to launch. For now, I'm to go and reinstall the ROM from the start and configure it again but this time, I'll flash gApps which doesn't replace ASOP apps.

just dl aroma version of opengapps and while flashing set it up not to replace camera app with google's one, and u should be fine)

khurrraam said:
Hello!
I've just finished putting '[ROM][6.0.1] Unofficial CyanogenMod 13.0 Nightlies (4K, USB-OTG, OTA, etc)' on my ZUK Z1.
http://forum.xda-developers.com/zuk-z1/orig-development/unofficial-cm13-t3277885
Everything went smoothly, and I have the ROM up and running. However, when I was flashing gApps. I flashed 'Stock' gApps as I didn't want any CM apps since I prefer using Google versions of it.
But in the process, it also removed Snapdragon Camera app from the ROM too. As quoted by MrColdBird:
Yes it's supported in the included Snapdragon Camera, however only at 60fps (50% speed) and up to 1080p. I'm still working on unlocking 120fps (25% speed) and slow motion for 4k.
I cannot post as of now in that thread. So, I cannot request the individual apk file from MrColdBird. I have looked around and while I can find Snapdragon Camera apk file (mostly 2.0 version), it requires a bit too many steps (including going through TWRP, applying permissions and so on) just to install an apk.
So, either I flash the ROM again and this time, flash different gApps to keep Snapdragon Camera (which means I'll start all over again since I've already setup my device). Or there is any other simpler way of just flashing a zip without having to deal with permissions, moving files around?
Any help would be appreciated.
Click to expand...
Click to collapse
Since when the Zuk Z1 support 4K capturing??
I think it is hardware matter not software!

I flashes some zips but none working for me
Enviado desde mi Z1 mediante Tapatalk

myp1lteandroid said:
Since when the Zuk Z1 support 4K capturing??
I think it is hardware matter not software!
Click to expand...
Click to collapse
MrColdBird's unofficial cm 13 has 4k video support

Does anyone have an idea of which camera app does one plus 3 use?
I was basically looking for a camera apk with manual focus adjustments. Any suggestions?

Does it works for CM14? any zip or link to try?

GOOGLE Camera not working

HEY! Developers please help me ,I have a Lenovo k6 power with stock ROM , unlocked bootloader and rooted,
I have tried about 5-10 Google camera mods ,apps etc but non of them work ,some doesn't install and in some of them when I switch to video mode the crashes ,please help me out

vibhansh61 said:
HEY! Developers please help me ,I have a Lenovo k6 power with stock ROM , unlocked bootloader and rooted,
I have tried about 5-10 Google camera mods ,apps etc but non of them work ,some doesn't install and in some of them when I switch to video mode the crashes ,please help me out
Click to expand...
Click to collapse
Had the same issue. For the ones that install, change the front and back camera video resolutions to 720p and it won't crash again. I currently use version 4.1.006. let me know if a newer version works for you when you apply the 720p video resolution

OSI007 said:
Had the same issue. For the ones that install, change the front and back camera video resolutions to 720p and it won't crash again. I currently use version 4.1.006. let me know if a newer version works for you when you apply the 720p video resolution
Click to expand...
Click to collapse
Bro I have 3.1.021 version but when I open it first it give a tutorial to swipe right for video but when I swipe the app crashes

Have you changed the video resolution in settings to 720p? Check the screenshots below. Worked for me.

OSI007 said:
Have you changed the video resolution in settings to 720p? Check the screenshots below. Worked for me.
Click to expand...
Click to collapse
Will you please provide the link for this mod of Google camera??

bmspr1502 said:
Will you please provide the link for this mod of Google camera??
Click to expand...
Click to collapse
Here you go. This is scrubber's gcam mod install as normal apk if you're on the latest lineage OS 15.1
https://www.celsoazevedo.com/files/android/google-camera/dev-scrubber/

vibhansh61 said:
HEY! Developers please help me ,I have a Lenovo k6 power with stock ROM , unlocked bootloader and rooted,
I have tried about 5-10 Google camera mods ,apps etc but non of them work ,some doesn't install and in some of them when I switch to video mode the crashes ,please help me out
Click to expand...
Click to collapse
Basically the stock ROM is 32 bit. So you can't possibly install the normal ones as they were grabbed from nexus 6p or 5x or pixel 1 or 2. Which are 64 bit based roms. If you really want to install Google camera, try to install a 64 bit ROM or use a 32 bit compiled Google camera.

Google Camera MOD - any available?

I'm trying to install Google Camera. So far, I've tried BSG versions , a few of them, all 32 bit of course (made for Android 6+). You can finde the list at celsoazevedo website, filter for BSG and look up for 3.2
None of them has worked, I can install the app, I can run it, I can record video but when I switch to camera mode I only see a black window and it freezes. I can even access the settings.
What can I do? Is it because S5 doesn't have Camera2 API? Is there a solution? I'd really like to use Gcam, even if it'd be a super old version, cause the stock camera of Resurrection Remix ROM is really bad
Thank you

noncicredoneanche said:
I'm trying to install Google Camera. So far, I've tried BSG versions , a few of them, all 32 bit of course (made for Android 6+). You can finde the list at celsoazevedo website, filter for BSG and look up for 3.2
None of them has worked, I can install the app, I can run it, I can record video but when I switch to camera mode I only see a black window and it freezes. I can even access the settings.
What can I do? Is it because S5 doesn't have Camera2 API? Is there a solution? I'd really like to use Gcam, even if it'd be a super old version, cause the stock camera of Resurrection Remix ROM is really bad
Thank you
Click to expand...
Click to collapse
You need to post this in the troubleshooting thread.

noncicredoneanche said:
I'm trying to install Google Camera. So far, I've tried BSG versions , a few of them, all 32 bit of course (made for Android 6+). You can finde the list at celsoazevedo website, filter for BSG and look up for 3.2
None of them has worked, I can install the app, I can run it, I can record video but when I switch to camera mode I only see a black window and it freezes. I can even access the settings.
What can I do? Is it because S5 doesn't have Camera2 API? Is there a solution? I'd really like to use Gcam, even if it'd be a super old version, cause the stock camera of Resurrection Remix ROM is really bad
Thank you
Click to expand...
Click to collapse
This old version will work - see attachment Unzip first
However I would try something like open camera from the playstore

TheFixItMan said:
This old version will work - see attachment Unzip first
However I would try something like open camera from the playstore
Click to expand...
Click to collapse
Thank you so much man, it's working
I wanted to try Gcam cause everyone says it's really good. I know the latest versions are much much better because of many factors, but I guess this old version is still better than the custom ROM stock ones.
I'll also try open camera, thanks

Works on G900F / G900FD ?

TheFixItMan said:
This old version will work - see attachment Unzip first
However I would try something like open camera from the playstore
Click to expand...
Click to collapse
This camera app just turned my s5 into a reliable, daily point and shoot capable, device thx

Android 9.0 For G920F/G925F

Hello Guys :fingers-crossed:
What about our beloved device, Is there any developer who works on this project to bring us android pie for this device
And if there can we test it ?? :good:​

Yes, and yes.
@lukasb06 is working on it, and TeamNexus (?). Go and give him thanks on his thread for the NexusOS
He hasn't been online in almost two weeks or so, though. Not sure how he'll feel about us being the ones to spread news about his ROM instead of letting him do that, but oh well.
https://stor.lukasberger.at/TeamNexus/.testing/Samsung/zero/9/2018-09-08/
Though be wary, there's not even a thread about it yet, so many bugs could be present.
Bit of advice:
1. Stock camera doesn't work - use the GCamera modded for the S7Exynos.
2. GPS in plain device mode doesn't work - use high accuracy.
GApps can be downloaded from the OpenGapps website just select ARM64, 9.0, pico, and flash them after flashing the ROM.

Nice Thank you :highfive:

What about RIL Is it working ??

Well, no one has reported it as a bug yet, as far as I'm aware, so yeah?
Though bluetooth call-audio, and VoLTE (like in Oreo ROMs) don't work.
Also, instead of the modded GCamera, you can try using Open Camera.

- black theme crashes
- can´t power off softkey lights

Calling is working, back camera is working in open camera, but front camera always FC.
That is what I tested for 30 min. (SM-G920F)

[Mi A1] Official Pie Update -> GCAM problems

After finally receiving Pie today, my Gcam doesn't work correctly anymore. What I mean by this it's that it can't focus properly.
Otherwise the app opens, it doesn't crash, and this phenomenon occurs only on the rear camera while taking a photo. Video focusing works, front camera focus works.
Any ideas?
December 5 security patch
Android 9
From Arnova's mods to the lates 6.1 Gcam versions, I was affected by this phenomenon

Well, I lost Hal3 during the process.. so GCam doesn't work at all. I'm trying to enable Camera2 API, but it didn't work so far. I've seen tutorials on how to do it through adb, but just doesn't do anything.

Try this
-First of all install (Camera2 API Probe)
Open it and check hardware support level (probably it's show LEGACY)
- Now install (Camera2 API Enabler)
open the app and enable:
- Enable Camera2 API
- Enable Camera EIS
Then apply
-Restart your phone
-Open Camera2 API Probe again (you must see new result as the attachment)
Now open your GCam and voila!

I will have problems with gcam if I upgrade to pie without a factory reset?
Enviat des del meu Mi A1 usant Tapatalk

I can confirm, that tap to focus does not work at all. All I get is out of focus picture in the viewfinder and that's all. Stock camera app works great, though.

Thread moved to the correct location.
Thanks for being careful next time.
Lupin The Third
Forum Moderator

@mouhannadsukkar
it says it's Level_3 already. But GCam still isn't working properly, after several reinstalls etc.
Same thing as @airidosas252 said!

@mouhannadsukkar
it says it's Level_3 already. But GCam still isn't working properly, after several reinstalls etc.
Same thing as @airidosas252 said!

Xiaomister said:
Well, I lost Hal3 during the process.. so GCam doesn't work at all. I'm trying to enable Camera2 API, but it didn't work so far. I've seen tutorials on how to do it through adb, but just doesn't do anything.
Click to expand...
Click to collapse
Same...
Verstuurd vanaf mijn Mi A1 met Tapatalk
---------- Post added at 10:41 AM ---------- Previous post was at 10:35 AM ----------
So how about getting hal3 and eis enabled without root? Because I followed the guides in this forum. Go into TWRP and perform all the adb commands. Still Legacy...
mouhannadsukkar said:
-First of all install (Camera2 API Probe)
Open it and check hardware support level (probably it's show LEGACY)
- Now install (Camera2 API Enabler)
open the app and enable:
- Enable Camera2 API
- Enable Camera EIS
Then apply
-Restart your phone
-Open Camera2 API Probe again (you must see new result as the attachment)
Now open your GCam and voila!
Click to expand...
Click to collapse
Verstuurd vanaf mijn Mi A1 met Tapatalk

It's still Level_3 for me.. I guess we gotta wait for the guys with exp to figure it out..

bsg test 8.1 version works. selfie camera quality is sheit though. Also, portrait mode doesn't. But night sight does, which is nice!

false alarm, bsg 8.1 works for normal pics, but night sight has the same focus hunting issue as other apps

Guys. My wife's A1 had camera2 api enabled through that method that unlocks bootloader, enter the TWRP, change the build.prop line and after relock the bootloader. No root or TWRP installed.
If she update the system to pie, does it will edit again build.prop reverting Level 3? At least I saw mixed experience here with people saying the two things.

mouhannadsukkar said:
-First of all install (Camera2 API Probe)
Open it and check hardware support level (probably it's show LEGACY)
- Now install (Camera2 API Enabler)
open the app and enable:
- Enable Camera2 API
- Enable Camera EIS
Then apply
-Restart your phone
-Open Camera2 API Probe again (you must see new result as the attachment)
Now open your GCam and voila!
Click to expand...
Click to collapse
Does one need root for this?

antonioli84 said:
Guys. My wife's A1 had camera2 api enabled through that method that unlocks bootloader, enter the TWRP, change the build.prop line and after relock the bootloader. No root or TWRP installed.
If she update the system to pie, does it will edit again build.prop reverting Level 3? At least I saw mixed experience here with people saying the two things.
Click to expand...
Click to collapse
In my case after upgrading to pie, the level 3 persisted, so no need to do anything else.
However, the gcam ports do not work well as in oreo. Mostly problems with autofocus and selfie camera

Xiaomister said:
Well, I lost Hal3 during the process.. so GCam doesn't work at all. I'm trying to enable Camera2 API, but it didn't work so far. I've seen tutorials on how to do it through adb, but just doesn't do anything.
Click to expand...
Click to collapse
Same. I've tried 3 times but I can't unlock camera2api.

Still no updates on how to fix it? ?

Nope

My gcam works. Still front camera green issue but same as before
sainth4tred said:
@mouhannadsukkar
it says it's Level_3 already. But GCam still isn't working properly, after several reinstalls etc.
Same thing as @airidosas252 said!
Click to expand...
Click to collapse
Sent from my Mi A1 using Tapatalk

gcam only work when u dont set the hdr+ .. and even though it can snap a nice picture, but no hdr or hdr+, it's useless now..