Always returns to stock recovery - OnePlus 5 Questions & Answers

Good morning all,
I tried 2 days ago to upgrade to Oreo and since then all my troubles began.
I have unlocked bootloader and encrypted device.
The problem is that in every reboot a stock recovery shows up ,while i have installed the latest blue spark or any other recovery.
Now i can only install stock rom with no root.

kimon60 said:
Good morning all,
I tried 2 days ago to upgrade to Oreo and since then all my troubles began.
I have unlocked bootloader and encrypted device.
The problem is that in every reboot a stock recovery shows up ,while i have installed the latest blue spark or any other recovery.
Now i can only install stock rom with no root.
Click to expand...
Click to collapse
Are you going for root? I think you have to flash Magisk (or other root-solution) in order for your custom recovery to stick.

Augustin79 said:
Are you going for root? I think you have to flash Magisk (or other root-solution) in order for your custom recovery to stick.
Click to expand...
Click to collapse
In Nougat that was not the case,maybe in Oreo there is something different?

I'm having a similar problem! I'm rooted, unlocked, and decrypted but I can't seem to install any Oreo Rom. Do I need to re-encrypt my rom??

WIMP35 said:
I'm having a similar problem! I'm rooted, unlocked, and decrypted but I can't seem to install any Oreo Rom. Do I need to re-encrypt my rom??
Click to expand...
Click to collapse
No, I managed to load the latest twrp recovery and without reboot I installed the xXx rom Oreo.
After that there was an App installed already called TWRP recovery. Since I flashed the recovery again through that app the problem is gone.
Now I have Oreo xXx rom and everything works fine.

After fastboot flash recovery, reboot into recovery and flash recovery IMG again. Then it will be there regardless of what ROM encrypted or not.

Related

ZE520kl OTA upgrade doesn't work

Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.

Bootloop?

So I just got my Nexus 6p today and I've tried rooting this thing but it just kept making me stuck on the google logo. I successfully unlocked the bootloader and installed TWRP but everytime I installed from ZIP SuperSU or Magisk it would keep getting me stuck on the google logo. I've tried this several times because I could still go to bootloader. I've flashed the stock image a couple of times and reinstalled TWRP but I just can't get it to root.
Edit: I have flashed to stock and I'm on 6.0. I haven't tried reinstalling TWRP but the bootloader is unlocked and everything else is stock.
Edit 2: I just flashed TWRP and now I'm stuck on the google logo. Wtf is this??
nemesis101x said:
So I just got my Nexus 6p today and I've tried rooting this thing but it just kept making me stuck on the google logo. I successfully unlocked the bootloader and installed TWRP but everytime I installed from ZIP SuperSU or Magisk it would keep getting me stuck on the google logo. I've tried this several times because I could still go to bootloader. I've flashed the stock image a couple of times and reinstalled TWRP but I just can't get it to root.
Edit: I have flashed to stock and I'm on 6.0. I haven't tried reinstalling TWRP but the bootloader is unlocked and everything else is stock.
Edit 2: I just flashed TWRP and now I'm stuck on the google logo. Wtf is this??
Click to expand...
Click to collapse
Could be because you are on older version of Android. Did you make sure you are on the correct bootloader? Anyways I found with stock you must complete the initial setup then you can go back and root later. I've had success with Magisk 16.0 on nougat and Oreo so don't see why it wouldn't work on marshmallow.
Exodusche said:
Could be because you are on older version of Android. Did you make sure you are on the correct bootloader? Anyways I found with stock you must complete the initial setup then you can go back and root later. I've had success with Magisk 16.0 on nougat and Oreo so don't see why it wouldn't work on marshmallow.
Click to expand...
Click to collapse
What is a 'correct bootloader' anyway? I am on the latest bootloader and flashed latest factory images and still bootlooping, can't even make it to recovery mode (flashed 4-cores TWRP after I flashed stock).
Gamool said:
What is a 'correct bootloader' anyway? I am on the latest bootloader and flashed latest factory images and still bootlooping, can't even make it to recovery mode (flashed 4-cores TWRP after I flashed stock).
Click to expand...
Click to collapse
Ok sorry you said 6.0 in comment that's why I asked about bootloader. Also thought was just the root giving you a hard time not the dreaded bootloop that some 6Ps get.

lost root, now system UI crashes

So I was rooted, twrp'd..all the things.
Saw an official TWRP release finally out, so tried to install it via TWRP flash....
Then it got weird....
Kept booting to TWRP recovery..
Then booted, but the bootloader animation I added was gone....booted into the stock 9.0 it shipped with?
Now says failed to apply update...
Flashed magisk again....substratum working...all seems normal but when I touch notifications system UI crashes....
Pretty sure I previously updated past 9.0....now says 9.0...
Thinking I triggered a restore to version it shipped with but now that it's rooted the partial OTA update fails?
Is that a thing?
Thinking I should 'update' to latest full .zip of t-mo version, flash TWRP, then flash magisk.
Sound right?
Any advice?
Thx!
try using software
try using software hope its work
kgn.accessories said:
try using software hope its work
Click to expand...
Click to collapse
Lol wut?
naxalite971 said:
So I was rooted, twrp'd..all the things.
Saw an official TWRP release finally out, so tried to install it via TWRP flash....
Then it got weird....
Kept booting to TWRP recovery..
Then booted, but the bootloader animation I added was gone....booted into the stock 9.0 it shipped with?
Now says failed to apply update...
Flashed magisk again....substratum working...all seems normal but when I touch notifications system UI crashes....
Pretty sure I previously updated past 9.0....now says 9.0...
Thinking I triggered a restore to version it shipped with but now that it's rooted the partial OTA update fails?
Is that a thing?
Thinking I should 'update' to latest full .zip of t-mo version, flash TWRP, then flash magisk.
Sound right?
Any advice?
Thx!
Click to expand...
Click to collapse
Please use the full zip to update and after the flash of the full zip flash the twrp installer > reboot recovery > Flash Magisk
You can find detailed instructions on the stable/beta OOS threads running in the Guides section.
Let me know if you need anything else.
Funk Wizard said:
Please use the full zip to update and after the flash of the full zip flash the twrp installer > reboot recovery > Flash Magisk
You can find detailed instructions on the stable/beta OOS threads running in the Guides section.
Let me know if you need anything else.
Click to expand...
Click to collapse
I fastboot flashed a fastboot T-Mobile 9.0 stock, then made sure all was good, flashed a fastboot 9.0.10, TWRP, and then magisk
all good.
Thanks so much!

help please

my oneplus 6t has the red ! warning and will not boot. i can get into the stock recovery menu and the fastboot menu. can someone please help me.
i unlocked my bootloader
installedd twrp (which i can only seem to get the stock recovery)
rooted
installed custom rom
and thats what i get when it rebooted.
am i just screwed or is there hope for my phone ?
skaroger867 said:
my oneplus 6t has the red ! warning and will not boot. i can get into the stock recovery menu and the fastboot menu. can someone please help me.
i unlocked my bootloader
installedd twrp (which i can only seem to get the stock recovery)
rooted
installed custom rom
and thats what i get when it rebooted.
am i just screwed or is there hope for my phone ?
Click to expand...
Click to collapse
Go to below link, download and flash latest fastboot ROM.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
If that does not work, use MS tool to recover phone to factory state.
Thanks this worked for me. Was freaking out a little. The scene has really changed since I've been here.
skaroger867 said:
Thanks this worked for me. Was freaking out a little. The scene has really changed since I've been here.
Click to expand...
Click to collapse
As an FYI, in order to root on this phone, assuming you are using Magisk (recommended) you will need to:
Unlock bootloader
Install custom rom (Optional step, but also recommended)
Then flash TWRP zip (This phone, TWRP is part of the boot.img)
Boot the phone
Reboot to recovery
Install GAPPS (OpenGAPPS Stock recommended personally, but any should work)
Then flash Magisk
sandix said:
As an FYI, in order to root on this phone, assuming you are using Magisk (recommended) you will need to:
Unlock bootloader
Install custom rom
Then flash TWRP zip (This phone, TWRP is part of the boot.img)
Boot the phone
Reboot to recovery
Install GAPPS (OpenGAPPS Stock recommended personally, but any should work)
Then flash Magisk
Click to expand...
Click to collapse
Custom rom is not required for root
bladestonez said:
Custom rom is not required for root
Click to expand...
Click to collapse
Correct. I edited my comment to reflect that, however since OP installed a custom rom, I put the step in since I figured he would have asked about it.
sandix said:
As an FYI, in order to root on this phone, assuming you are using Magisk (recommended) you will need to:
Unlock bootloader
Install custom rom (Optional step, but also recommended)
Then flash TWRP zip (This phone, TWRP is part of the boot.img)
Boot the phone
Reboot to recovery
Install GAPPS (OpenGAPPS Stock recommended personally, but any should work)
Then flash Magisk
Click to expand...
Click to collapse
Ok so my phone currently is bootloader unlocked and rooted with magisk. So if I want to install a custom rom I flash in twrp, then flash twrp (while still in twrp), boot phone, reboot to recovery, flash gapps then flash magisk?
read the OP in any custom rom you want to flash, and the dev will have the details on how to flash..
skaroger867 said:
Ok so my phone currently is bootloader unlocked and rooted with magisk. So if I want to install a custom rom I flash in twrp, then flash twrp (while still in twrp), boot phone, reboot to recovery, flash gapps then flash magisk?
Click to expand...
Click to collapse
Essentially. Each custom ROM is differrent, so make sure to read the OP of each custom ROM you try to confirm flashing instructions but that's the **general** flashing method I use. Magisk is overwritten with each flash because Magisk installs to the same partition as the kernel.

Rooting with official rom?

Hi fellows
I wanted to root my Mi 9T, but I don't want to flash a custom rom, I just want to have root on the official rom (global stable).
As I understand, the correct procedure is:
-unlock nootloader
-flash twrp
-flash magisk
But I have a couple of doubts about this, in particular about updates:
-If my phone is unlocked and I have root, will I still receive official updates from xiaomi?
-if yes, do they install via twrp? Do they fail installation? Do I loose root/bootloader unlock if I install them on unlocked/rooted phone?
-if no, is there an alternative way to install updates without losing root every time?
In other words, what is the best way to have a rooted phone but with official, up-to-date rom? (I have no problems downloading/installing updates manually, but having to reapply root every time would be annoying)
Master_T said:
Hi fellows
I wanted to root my Mi 9T, but I don't want to flash a custom rom, I just want to have root on the official rom (global stable).
As I understand, the correct procedure is:
-unlock nootloader
-flash twrp
-flash magisk
But I have a couple of doubts about this, in particular about updates:
-If my phone is unlocked and I have root, will I still receive official updates from xiaomi?
-if yes, do they install via twrp? Do they fail installation? Do I loose root/bootloader unlock if I install them on unlocked/rooted phone?
-if no, is there an alternative way to install updates without losing root every time?
In other words, what is the best way to have a rooted phone but with official, up-to-date rom? (I have no problems downloading/installing updates manually, but having to reapply root every time would be annoying)
Click to expand...
Click to collapse
As I know you could receive updates if you unlock your bootloader and flash magisk, I don't have experience with that, I've read that from other brands people do this and still get their updates.
If I'm wrong correct my.
• You will receive the ota but it won't install
• You'll have to install the full rom and reflash Magisk everytime
• Orange Fox recovery can install ota BUT not available for Mi 9T/K20
I'm not sure about Mi 9t (have to wait for bootloader unlock), but it was so on Redmi 3s: I can install OTA updates, it goes through TWRP, but after every update I have to flash Magisk.
It was several years ago, so probably they've changed something
Thanks for your replies guys.
I can now confirm (just tested) that to update a rooted mi9t all you have to do is this:
-flash update zip with twrp (you have to download the update zip from somewhere, like mifirm website, the one downloaded by the update tool is encrypted and won't work!)
-flash magisk
-reboot
Very simple! No need to reflash magisk modules, just the magisk base package and everything works as expected ?
Master_T said:
Thanks for your replies guys.
I can now confirm (just tested) that to update a rooted mi9t all you have to do is this:
-flash update zip with twrp (you have to download the update zip from somewhere, like mifirm website, the one downloaded by the update tool is encrypted and won't work!)
-flash magisk
-reboot
Very simple! No need to reflash magisk modules, just the magisk base package and everything works as expected
Click to expand...
Click to collapse
Which twrp and magisk do you use?
grinandbearit said:
Which twrp and magisk do you use?
Click to expand...
Click to collapse
First TWRP that came out (LR Team), but that is because it was the only one available at the time, there might be better ones out now, check the TWRP thread for more info.
Magisk, I used the latest stable release.
Master_T said:
Thanks for your replies guys.
I can now confirm (just tested) that to update a rooted mi9t all you have to do is this:
-flash update zip with twrp (you have to download the update zip from somewhere, like mifirm website, the one downloaded by the update tool is encrypted and won't work!)
-flash magisk
-reboot
Very simple! No need to reflash magisk modules, just the magisk base package and everything works as expected
Click to expand...
Click to collapse
I think it is more simple to do the update and reflash magisk instead of searching for the update package manually, isn't it?
Edit: wrong quote
fabsen said:
I think it is more simple to do the update and reflash magisk instead of searching for the update package manually, isn't it?
Click to expand...
Click to collapse
You mean flash the fastboot rom using a computer and then reinstall twrp and magisk?
Seems more convoluted to me, since you still need to download the rom from an external website and additionally you need a pc and you need to reflash twrp every time.... it'll probably work fine, but it seems more complicated to me
Master_T said:
You mean flash the fastboot rom using a computer and then reinstall twrp and magisk?
Seems more convoluted to me, since you still need to download the rom from an external website and additionally you need a pc and you need to reflash twrp every time.... it'll probably work fine, but it seems more complicated to me
Click to expand...
Click to collapse
Nah, I mean you flash the update you get the usual way. And then magisk afterwards. At least I've never lost twrp with OTA updates.
fabsen said:
Nah, I mean you flash the update you get the usual way. And then magisk afterwards. At least I've never lost twrp with OTA updates.
Click to expand...
Click to collapse
You mean the one downloaded through the miui updater? I can't flash that with twrp, it's encrypted. In fact, I can't even open the zip file with file manager, it says the file is corrupted. How do you decrypt/use it?
Few days ago I got OTA update while having magisk root and TWRP installed. It rebooted phone into TWRP and installed itself through TWRP. So it seems Xiaomi can now detect what recovery you are using and instead send you recovery OTA instead? Sadly I lost TWRP and root this way and needed to find newer TWRP (old one didnt boot and caused bootloop). Rom also didnt boot (after flashing new TWRP) until I flashed magisk.
Thank you all, it's nice to find this post before I create a new with the same questions.
I bought a new "Mi 9t", it received the latest OTA update, and it has been unlocked after waiting 170 hours.
MIUI Version: MIUI Global 10.3.11 Stable
Android Version: 9 PKQ1.190302.001
Model Name: M1903F10G
Now I need to root it without flashing twrp, I need to be on the Stock recovery because I don't want to lose the OTA update.
I ran this command :
Code:
C:\adb>fastboot boot recovery.img
Downloading ‘boot.img’ OKAY [ 1.404s]
booting OKAY [ 0.127s]
Finished. Total time: 1.560s
but the device reboot to MI-Recovery 3.0, can someone correct me if I'm wrong? also which twrp version support MIUI Global 10.3.11 Stable?
Matthas said:
Few days ago I got OTA update while having magisk root and TWRP installed. It rebooted phone into TWRP and installed itself through TWRP. So it seems Xiaomi can now detect what recovery you are using and instead send you recovery OTA instead? Sadly I lost TWRP and root this way and needed to find newer TWRP (old one didnt boot and caused bootloop). Rom also didnt boot (after flashing new TWRP) until I flashed magisk.
Click to expand...
Click to collapse
Weird, I tried that (downloading update from the updater app and rebooting to twrp to auto-flash it), but TWRP said update was corrupted. I had to download an unencrypted version from mifirm site to flash it with twrp.
Maybe it's a problem with the version of twrp? Which one are you using? I'm using the one from LR Team
Master_T said:
Weird, I tried that (downloading update from the updater app and rebooting to twrp to auto-flash it), but TWRP said update was corrupted. I had to download an unencrypted version from mifirm site to flash it with twrp.
Maybe it's a problem with the version of twrp? Which one are you using? I'm using the one from LR Team
Click to expand...
Click to collapse
oh I wish I knew After update when I went to flash back old twrp and magisk it resulted in bootloop so I was flashing all twrp I could find just to make them boot and then be able to flash magisk. However name of my file is "recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150" I think its "fixed" chinese one.
Is "recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150" support for MIUI Global 10.3.11 Stable?
Can I boot from it to root Mi 9T without flashing?
akha666 said:
Is "recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150" support for MIUI Global 10.3.11 Stable?
Can I boot from it to root Mi 9T without flashing?
Click to expand...
Click to collapse
Is any expert have an answer to my questions?
Schnedi said:
• You will receive the ota but it won't install
• You'll have to install the full rom and reflash Magisk everytime
• Orange Fox recovery can install ota BUT not available for Mi 9T/K20
Click to expand...
Click to collapse
How do i root global stable rom 10.3.11 without bootlooping? Just rooting and no twarp .

Categories

Resources