Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
guyz i need urgent and seriosu help...im totally helpless
i give my friend g2 f320s..it rooted and updated so its download mode recovery mode all had been corrupt so i revive its phone through Linux Method..
Now again my friend install i dont know g pro recovery or i dont have confirm info but now its phone stuck at Lg boot animation...no recovery only lg Lg Service ..so i tried to flash kdz but strange thing is it only shows download mode first logo not second..im attaching pic if somebody dont understand...so what i have to do..how can i flash it ..waiting for ur reply
install lg flashtool on your pc, download dll and tot filles.then kdz it.
I was dumb and tried to flash a kitkat d802 firmware onto my d801 with a d801 kernel. After leaving recovery I got stuck on a fastboot screen and couldn't get into recovery or download mode. I followed this http://forum.xda-developers.com/showthread.php?t=2681089 , and was able to finally have download mode boot up (shows the phone as b100 instead of d801). I downloaded tot and dll file from here http://downloads.codefi.re/autoprime/LG/LG_G2/D801BK/Stock_Firmware and tried to flash it on my phone. But in the LGFlashTool program it says device model is different, and shows it as a model d802 now. Am I screwed?
Hi, i wanted to go back to stock so i used lg bridge update error recovery to go back to stock and when it finished its stuck the the lg boot screen. please help
Loads threads out there on how to fix this issue, stop being lazy.
Flash full .kdz file from download mode (turn off the phone, hold vol down while connecting phone to PC) , with LG UP or UPPERCUT.
https://androidfilehost.com/?w=files&flid=197932
Make sure you download right KDZ for your model.
Hi ..
recently i flash Pie 9 H330b on H873i it give error when reach to system ..so i Partition dl and uncheck System partiion and Check all partition it flash .. after that i reboot phone and it gone into dark ..so i shortPin it and it was now in QDloader 9008 mode ..
i use Qfil and follow one of the tutorial on XDA , it flash using Qfil but my phone was still show no sign on screen adn no blinking LED ...
so how can i get download mode from Qdloader ???
Note : My G6 was H871 AT&T and i converted to H873 it work so i tried flashing Pie which brick it ....
So anyone has working Firehose and Raw[rogram.xml and Patch0.xml to load correct partiton and flash that .. becoz i use files on xda but that didnot load Partiton windows to select from ...may be tose file not work on my phone ??
Bricked LG G6 H871 [email protected] (Expert Help)
Hello i bricked my LG G6 H871 [email protected] version . I flashed to H873 canada version for oreo update and updated successfully .But after that i tried again to H873 pie update via FOTA upgrade(LG UP) Now my phone not booting up:(:(:( . But now LGUP...
forum.xda-developers.com