Hi, i wanted to go back to stock so i used lg bridge update error recovery to go back to stock and when it finished its stuck the the lg boot screen. please help
Loads threads out there on how to fix this issue, stop being lazy.
Flash full .kdz file from download mode (turn off the phone, hold vol down while connecting phone to PC) , with LG UP or UPPERCUT.
https://androidfilehost.com/?w=files&flid=197932
Make sure you download right KDZ for your model.
Related
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again
Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
guyz i need urgent and seriosu help...im totally helpless
i give my friend g2 f320s..it rooted and updated so its download mode recovery mode all had been corrupt so i revive its phone through Linux Method..
Now again my friend install i dont know g pro recovery or i dont have confirm info but now its phone stuck at Lg boot animation...no recovery only lg Lg Service ..so i tried to flash kdz but strange thing is it only shows download mode first logo not second..im attaching pic if somebody dont understand...so what i have to do..how can i flash it ..waiting for ur reply
install lg flashtool on your pc, download dll and tot filles.then kdz it.
Hey!
I have a problem with my LG G2. After unbrick my phone and successfully instaled Cloudy G2 3.3 I can't get into Download Mode. I think i might broke it while I've been trying a few methods to unbrick my phone. But after all I went through I'd like to install stock rom by KDZ and stop being worry about my device. But first I need to fix download mode somehow. I was thinking about flashing laf.img by TWRP but I'm worried that it may break my phone and leave me with no download mode, no system and no recovery.
Any advice?
Hi i am new in the forum and have a issue with my LG V20 F800k. That what is on back of him( under battery)
When i get him he have some koreantelekom firmware. When i check in settings -about- that say H918....
I flash with TWRP "H91820f" and he is so bad. Mobile restarting all time, wi-fi don't work all time. And when start after lg logo i have T-Mobile logo. No more koreantelekom: ). Maybe bad rom
I try to flash stock rom with LGUP, but with no success.I go to bootload mode on phone,.First LGUP asked me .dll for H918. Found it . Put him in common folder in LGUP, but when i want to flash stock rom (upgrade bottton in lgup) process start, but after 17 seconds i got an error in setup (click herer to continue) . When i press again display me command port error-3
Can someone help me with flashing stock rom?
Thanks