I was using ODIN and after i tried to flash phone rebooted in a loop. I have download the stock firmware but when i try to re flash i get a failed error. I have also tried Samsung Switch Emergency recovery and put in SM-G930A and wont it unable to find recovery code.
On the phone when i run odin i see error REV CHEC FAIL aboot fused 4>binary2
Emmc Write fail aboot
Any help or suggestion is welcome
Never mind found i guess i had a bad download or something was able to resolve back to stock.
Hello. I have the same phone. Any idea what to do? My question is posted here
SM-G930A in constant boot loop
Hello. I have A Samsung S7 SM-G930A. I was using smartview to cast to my laptop and it overheated the phone and completely drained the battery. I don’t know if that is the cause of my problem but I’m just mentioning it because my problem started...
forum.xda-developers.com
Related
hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the proses
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work olso
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
any help
any help any one
:fingers-crossed:
You need to go to the at&t section on xda. This section is not for your phone.
Because you don't give any details about the Odin error, I can't help you further.
Most Odin errors can be solved by:
- Other cable
- Other usb port
- Other pc.
Hey guys, i'm new to rooting and flashing. Yesterday i succesfully rooted my Galaxy S5 SM-G900F (netherlands) (no simlock). I got TWRP installed and tried to flash Xposed. My bootloader wasn't unlocked and i thought i made a backup in TWRP but didn't(ubernoob). Now the phone is in a bootloop. I only see the samsung logo and nothing else. I can get into recovery mode which is TWRP now and into download mode.
I've downloaded the correct Stock Rom to flash it on my device with Odin3 so i can start from scratch. Unlike the guides and tutorials i get a FAIL error. "Get PIT mapping". I can't find the solution to get out of this bootloop. I've tried everything i can find online but then again i'm pretty noob.
Can someone PLS help me!
Greets, Gosse from Holland
[EDIT] I've tried installing firmware again with KIES according to a youtube video, it started downloading the firmware but when it tried to transfer it on the phone it said the phone isn't connected(just as it said when i started KIES3). After this process the boot loop is a bit different. I get a message saying: (translated from dutch): phonestorage damaged: the datapartition is damaged, you must reset your phone to factorysettings. clicking on : reset phone boots op TWRP real quick with a lot of text like unable to mount. and then the bootloop starts over again.
[FIXED!] no help from you guys at all. But trying a different USB port solved the "Get Pit for mapping" error. Super simpel solution. Hope this helps others!
so i got my hands on a s6 edge plus live demo unit. so i decided to root it but that failed, then i installed a custom rom and it worked. so i tried to install xposed so i booted my phone into recovery mode but i had an error message that said about the frp lock, but now when i boot my phone it keeps booting to recovery mods and i can't boot it normally. so i searched the internet and found nothing, so i tried myself but i got my phone in an akward situation now... when i boot it up i immedtiatly get a screen saying "an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software". i tried that but it said my device wasn't compatible and even with Kies and Kies 3 i had the same message. and when flash anything with odin even the stock files it says it failed and my phone says that frp lock thingy again... so can anyone help me please because i really want that phone to keep...
Hello everyone,
This is a SM G975F exynos model
Please note that the bootloader is locked!
I tried to root the phone and it sort of succeeded but now its stuck on bootloop
And moreover Knox is tripped ... if that even matters at all?
I can access download mode, recovery and charges normally with no issues at all.
Problem is i cannot get into the home screen or the setup screen
I have used odin to flash 2 versions of android 10
Since i cannot downgrade because of bootloader being locked....
The odin flashes two versions of 8 bit roms one is G975FXXU8DTH7 and other is G975FXXU8CTG4
Both are android 10
If i do try to downgrade odin gets stuck at boot image flash stage and doesnt work again due to bootloader being locked
can any one help me on what the issue might be?
i can get into download mode , recovery mode, the flash results in a success and i get a pass on odin as well
all it does is get stuck on samsung (non animating) stock splash screen and it restarts again and again
Some relevant information i fetched from download mode screen
KG State : Prenormal
FRP Lock : Off
OEM Lock : On (U1)
please assist me on further on this issue if you can
I can even share the video of the phone behaviour if needed via discord
Thank you
Hi,
Did you fix this problem, I'm in the same situation. Trying to flash all versions of ANdroid 10 and 11 now with Odin, as I don't know which stock formware it was on when it went into bootloop.
Update: When in Recovery Mode, go to the Recovery Logs, then one off those log histories shows all the System build numbers and their installation dates. FRom there you can work out which system was installed when it went into boot loop.
I installed the last system it was working on, then left it in boot loop for 2 hours and it suddenly started to initiate. Leaving it overnight didn't work as I think it turns itself off when the prompts aren't responded to.
Can you please post a photo as I am wondering if we have the same problem as described in this link:
Samsung S10 + bootloop ERASE FAIL: READ ONLY
Samsung S10 + SM-F975F/DS IMEI stating Taiwan (Update: Very contradicting information if the phone is Snapdragon OR Exynos) if it even matters to solve the issue I dont know Owner of the above since 2019 without issues; USB debugging mode...
forum.xda-developers.com
Hi everyone, I have a samung note 4 (SM N910C) and while using it just went off and when turned back on is stuck on the Samsung galaxy logo and wont get past it, tried pulling battery and memmory card and all as soft tricks from google but is of no use, so tried flashing a stock rom and odin shows pass at the end but the phone wont get past the samsung logo, checked and found need to do a format and all through recovery but i cant get into recocery either, havng error message recovery is not seandroid enforcing, tried flashing twrp but still odin pass and the error persists..
Anyone could be of any assistance please? Is there any workaround for this issue? Thank you in advance for the help..
Hello? Anybody plz.
try the PC program Smart Switch, you may succeed to get the emergency firmware installed on it
this might help