Related
I bought a T-Mobile galaxy Tab and it has been working fine (Just been using it over Wi-Fi). I was going to unlock it, so I put my ATT SIM in it and it immediately rebooted. Now it is stuck in recovery mode. I cannot get it to boot.
The only thing I had done to it prior to inserting the SIM was to root it. It worked because I used it for some time before I inserted my SIM.
Tried wipe data-Factory reset and it still boots right back into recovery mode.
If I try apply update.zip it fails with the error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted....
Any Ideas?
Install Odin3 1.7(in the stickies) on your pc. Then flash either the stock t-mobile rom, or the roto JMI rom. Both threads are in the development forum as are several "how to" threads.
Installed ODIN, how do I know what PIT file and what PDA file I need? I just want to put it back the way it was and start over. Where can I find the stock pit and PDA files?
It's in the development section. The thread is from Rotohammer. Search from your pc not your tab. Try searching google for rotohammer t-mobile stock rom.
I was searching from my PC. I did find the rom, the only issue was that ODIN sa the Tab (com window was Yellow) but it would get stuck at "settingConnection" in ODIN. While I was trying to flash (stuck where I mentioned previously) I tried to power it off (to try and put it back in to download mode) and the symbol changed to the Droid guy and the PC with a dotted line between them. After that happened, it immediately started flashing and now it is working properly (stock).
Now back to the forums to read more how-to guides.
Thanks for the help!
Figured I should write my experience in case it helps someone else.
That is right. Many others learn from your trials and tribulations. I'm glad you got it done.
OBTW the phone ! pc is also download mode, so flash away when that appears.
hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the proses
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work olso
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
any help
any help any one
:fingers-crossed:
You need to go to the at&t section on xda. This section is not for your phone.
Because you don't give any details about the Odin error, I can't help you further.
Most Odin errors can be solved by:
- Other cable
- Other usb port
- Other pc.
I recently got the update for lollipop on samsung kies 3.
I have an i9500 s4.
I got into my pc and had gone through the process and for some random reason my samsung kies popped out an error and the firmware upgrade failed so i had to do emergency recovery. Now the problem is that the emergency software recovery isnt working properly and so my phone has one error screen which i have posted as an attachment. Kindly help me through this process as i need this phone crucially.
Flash ROM via Odin (with pit)
thanks for replying
please give me a link to a detailed tutorial (with pit)
and my my phone is not rooted.
Everything you need is in the general section
Reply with help (SOS)
i tried flashing a lollipop firmware with odin v3.10.6 for about 20 times.
all i get is a xmit data write fail.
my phone can't start or go into recovery mode, all it can go to is download mode.
is there a way where i can reset my device completely or just upgrade to lollipop.
my s4 is a gt i9500 and it isn't rooted.
please get me a solution and a decent one.
Thanks for all the help in advance. please help :crying:
Sounds like you have a bad connection
Change your cable and USB connection
thanks dsa i got the fix
I'm having this problem past few days, tried all the links in the Q/A section, dev.. all links were dead.. and managed to found solutions for this problem.
Basically, the tab will stuck on "Samsung" logo and looping for eternity... tried to reflash the rom, wipe system and everything via odin.. will results the same thing...and I thought I'm gonna say good bye forever for my note 10.1 (n8000)...or send for repair (which samsung quoted me ~ $158 for the "board replacement"... but until I found how to get it alive... actually I've no idea what causing my n8000 stuck in the first place..
After a whole day "intensive" searching and everything.. almost all files links in xda were dead.. and finally I found out all the files and solutions..
What you'll need
> Odin 3.xx, can get from samfirmware website
http://www.sammobile.com/firmwares/download/30977/N8000XXUDNE5_N8000OLBDNE3_XME/
> Samsung drivers
http://forum.xda-developers.com/showthread.php?t=961956
> note 10.pit and efs (extract the efs.rar after download, yes it's i9300 but can be used)
> n8000 rom, can get from http://www.sammobile.com/ or development section. I prefer flashable rom in recovery such as android revolution HD, and place it in microsd.
> Philztouch CWM
(files as attached)
Steps to do the recovery
1. Download odin and extract
2. Download drivers and install.
3. Run Odin, place the following files
- click the PIT button, select the note10.pit.
- click the CSC, and select the previously extracted efs.rar..it should be efs.tar now
- click on AP, for custom recovery, such as philz.. or official rom..up to you.
4. Tick the following menus in Odin
- Re-Partition (optional, some users said no need to tick this would do as well)
- Phone bootloader update
- Phone EFS clear
5. Place your n8000 in download mode, and connect via USB.
6. Click on START button.. and hopefully success.
7. Once finishes, reboot into recovery mode (those who flash rom via Odin can skip this), and install the rom zip file.
Everything should be fine now and your n8000 should able to start properly... that's how I managed to "resurrect" my n8000 tho... hope these helps... mine was n8000 16GB, 3G/Wifi version
What is decription key for Mega download?
What is decription key for Mega download?
Also need the description key for the MEGA Downloads please.
description plz
sorry for didnt notice the replies, not sure why my notifications were off.
will reupload again later this, since mega kinda blocked my account details :s
Attached the related files...seems cloud storage failing on me..
Hi there!
I'm new to this and need help understanding what to install under Step 2, which is downloading and installing of Samsung drivers.
I have already unzipped the Samsung driver file but I don't seem to see any installation files. Do I have to plug in my Note to get to this? Or are they installed onto the computer first?
Many thanks, as this could potentially save my Note and save me $500... :fingers-crossed:
boootloop problem
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'
After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.
ipoddude95, I have same problem. I tried different computers, different cable, different versions of odin to flash different versions of stock roms. but no success so far...
Similar problem
Hi,
I've got similar problem and I check couple of methods to solve this, unfortunately none was successful.
I tried method described in this thread, but was not successful.
I have old version of TWRP recovery (2.5.0.0). I can load recover but whatever I try to do - clear cache, format data, install recovery using dd it finish with error.
I tried installing new recovery twrp and philz using odin, using heimdall, everything seems to be ok, but when I try to load recovery I've got couple of restarts and then old TWRP loads. I've tried stock firmware, custom, with repartition and without.
I'm guessing that in my case it could be some kind of physical problem with memory.
What I can check more or what to try? How can I determine whether problem may be physical with rom memory?
shaikhmdjohar said:
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'
Click to expand...
Click to collapse
try different port
weird those how i fixed 2 of the n8000, later on will try on my tab again once i got my tab back from my friend
ipoddude95 said:
After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.
Click to expand...
Click to collapse
try go to download mode, and reflash recovery
gamesky said:
try go to download mode, and reflash recovery
Click to expand...
Click to collapse
I have, instead of just showing the initial "galaxy note 10.1" screen it goes to the "Samsung" logo with the animation and cycles through that. Still can't get into recovery.
thanks for the help
Hello, i have also this issue with the galaxy note 10.1 gt-n8020, its stucks on samsung logo and doesnt go any further...i dont have a custom firmware neither the tablet its rooted, i tried with odin having the original firmware but when i press start, after the msg "Start write to NAND" i get a FAIL and ends there. Even with the method mentioned here, still i get the FAIL msg...any Info on this on what might be the cause and maybe a possible fix?Can this be also hardware related malfunction?I cant go into recovery mode, only download mode works...
Thank you for the help, my Samsung note 10.1 note went on boot loop about a year ago , i tried so many different ways to flash it and nothing worked. finally got it working with your help.
only problem i encountered was wen i click on (AP, for custom recovery, such as philz.. or official rom..up to you.) it didnt allow me to put the downloaded file in so i used (i9300_repair_efs.tar)
and it worked..
THANK YOU
You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more
Agyar said:
You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more
Click to expand...
Click to collapse
Can you tell us exact steps you did? Because I am trying without success :\
Also another thing: the i9300_repair_efs.tar it's a rar and when extracted I get a directory with a .md5 file... Is that file that are you using?
Yes, that md5 was used.....
I've went completely by procedure described in first post, with exception of i9300_repair_efs change as mentioned. For that part, I've used latest Odin downloaded from Samsung web, and for bootloader, I've used Odin 3.05, just to be sure, since there is a button with "Bootloader" written on it
Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.
So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?
What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?
Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!
Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?
A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1
Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.
Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk
Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?
For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?
So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.
@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687
I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656