Hello guys, I need your help please!
I bricked my phone ! When I press the Power On Button it says COOLPAD POWERED BY ANDROID and after 10 sec it swicht off. Also when I try to boot to recovery and to the bootloader or fastboot, it swicht automatically off. Even if the mobile is connected with the computer.
My computer does not recognize when I boot to fastboot. I try install many drivers but it doesn't work.
I try to boot to Qualcoom Mode (QFIL or MIFLASH) to flash new TWRP and my Cool1 start to the recovery and also switch off automatically after 10sec. :crying: So it can't boot to anything! I try also YGDP and Coolpad Assistant. By YGDP I try to flash back to EUI but it doesn't work because I'm now on the newer version. Coolpad Assistant can't does not recognize my phone! Please help me or I have to spend 2 months without a phone. ! :crying::crying:
Thank you!!!
did u solve it?
Related
Hey there! Bought a yureka plus A weak ago. Since i dont like kitkat i wanted to flash a custom ROM but i dont have a PC so rooted it with kingroot. and then after rooting flashed TWRP with flashify and rebooted but after clicking on reboot it stucked on YU logo and not booting. i go to my friends home and to flash stock firmware but it isnt booting into fastboot too. Help
maybe i'll get some help here
Thanx In advance guys
i have the same problem den i read some threads and found "factory-image-flash-tools-windows-flashtools" ... after i flash it to cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip ...but failed to start ...i am pressing the power button but it is not srting .. plz help
Anonymouspal said:
Hey there! Bought a yureka plus A weak ago. Since i dont like kitkat i wanted to flash a custom ROM but i dont have a PC so rooted it with kingroot. and then after rooting flashed TWRP with flashify and rebooted but after clicking on reboot it stucked on YU logo and not booting. i go to my friends home and to flash stock firmware but it isnt booting into fastboot too. Help
maybe i'll get some help here
Thanx In advance guys
Click to expand...
Click to collapse
Try method to connect phone with PC
Press Volume + key and attach cable. It shows fastboot mode
I checked it in my yureka plus 5510a
Try annabathina tool for unbricking device... Even if u don't have any types of bricking, it will factory reset ur device and solve NAY problems... Plus u get twrp recovery
Just switch off device, press volume up key and connect to PC... Make sure u have all the drivers of yureka/+ on ur PC and just run the tool... I tried it, works fabulously!
hello help me please
hello,
before all, thanks for helping people around the world about solving problems in their zte phones
I have a zte axon 7 A2017G it worked perfectely until i download the nougat 7.0 version i install it via twrp and my phone is stuck in the logo zte without access to neither bootloader nor recovery.
The problem is that i tried many tpoics from xda but when i try to flash a stock firmware using the qualcom tool wich recognize my phone i dont find the xml file in the stock firmware and i dont know how to do to get it functional again.
i am stuck in this point since 10 days now and i hope you will help me repair my zte axon
can someone send me a link to a tuto or to explain me the steps to install a stock firmware and the tool i should use please
Thanks a lot
Imad
You can try booting to FTM mode by powering off your device, press and hold your volume down and power button till you get in FTM mode, then your computer should detect it. From there, you could install TWRP by following the instructions on https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379. Once you installed TWRP, you could install the bootstack and stock system of the version you want at https://www.androidfilehost.com/?w=files&flid=112651. Been through the same thing when I tried upgrading my A2017G to nougat, and I thought I was f*cked till I remembered you could boot your device to FTM mode XD
MahathirMohamad_ said:
You can try booting to FTM mode by powering off your device, press and hold your volume down and power button till you get in FTM mode, then your computer should detect it. From there, you could install TWRP by following the instructions on https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379. Once you installed TWRP, you could install the bootstack and stock system of the version you want at https://www.androidfilehost.com/?w=files&flid=112651. Been through the same thing when I tried upgrading my A2017G to nougat, and I thought I was f*cked till I remembered you could boot your device to FTM mode XD
Click to expand...
Click to collapse
Thanks for youn answer. and your support.
have you been in the same situation ? is it what we call a hard brick ? The FTM is the factory test mode is it?
Thanks a lot
Hi guys,
I want to fix my friend's Redmi 3s. He was trying to update system, but he get bootloop (lol).
I can turn on fastboot mode or even service mode. I was trying to flash system via MiFlash (download mode>flashing) but all the time I got massage in MiFlash "Can not send to COM..." or "Can not read from COM...". Reinstalling drivers etc doesn't help.
+when I'm trying to go to the recovery the screen shows me some picture Redmi + USB cabel, and that's all.
What can I do? Please, help me. Thanks in advance. Peace!
I am assuming you are dealing with MIUI 8. Is the bootloader on your friend's phone locked or unlocked? If it is unlocked, press Volume Up + Power buttons simultaneously then select Download to enter Emergency Download mode. You should be able to flash from there with MiFlash. If the bootloader is locked, you have to use an Engineering or Deep Flash cable like in this guide http://en.miui.com/thread-316728-1-1.html.
Good luck!
recently my mom's phone lenovo a6000 was having some issues so i did a hard reset later it was stuck at lenovo logo after 2/3 hours of wait i decided to flash stock rom some how managed to get it into edl or download mode with and thn got some error with the flashtool i was usin (QFIL) and the phone completely died and was stuck in a black screen of dead some how it is showing in my device manager as qualcom 9008 something but it is un-useable and i cant flash anything nor i cant get out of 9008 mode
Can you get into download mode using volume down + power key? Does adb detect the phone? If yes, then flash this twrp recovery https://forum.xda-developers.com/android/general/recovery-lenovo-p70-t3296687 using adb and if that works, then simply download the stock zip (just search google Lenovo_A6000_S034_Q113507_20170301 zip ) and flash it in twrp recovery. It will take some time (10-30 minutes approx) to flash so be patient.
Reply back if you need clarification.
user0u said:
Can you get into download mode using volume down + power key? Does adb detect the phone? If yes, then flash this twrp recovery https://forum.xda-developers.com/android/general/recovery-lenovo-p70-t3296687 using adb and if that works, then simply download the stock zip (just search google Lenovo_A6000_S034_Q113507_20170301 zip ) and flash it in twrp recovery. It will take some time (10-30 minutes approx) to flash so be patient.
Reply back if you need clarification.
Click to expand...
Click to collapse
buddy firstly thanks alot for replying
my phone is completely dead it is some how stuck in 9008 it only gets detected in pc even when i take off the battery
and when i try to flash through qfil i get sahara and firehorse error thn the phone gets disconnected
guide me to get it out of 9008 mode tried everything but nothing is working is it possible to push it to adb from 9008 ?
thanks.
Sorry man, if my previous instructions didn't work and adb doesn't detect the phone then I can't help any further.
Hi,
i was trying to install a new custom rom.... i wiped all data going in twrp recovery mode ..... now the phone doesnt have any os and stuck in automatic boot loop it is not recognized in my laptop and vol+ + power is also not working to take me to recovery....
and when i connect to pc also.... it goes in boot loop automatically...
HOW do i Solve the issue???
can someone please help me?????? please!!!!!!!!!!!!!!
note - my device had twrp installed only thing is im not able to enter the recovery mode by physical keys and phone is not detected in my laptop!...
Try changing the battery maybe.
Hi, i have literally the same problem, did you fix it?