Database Users

[TWRP]Unlock huawei Honor 2 U9508/ Ascend g615

Hi everyone
This is how to unlock and install TWRP (root too) the Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed.
Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on :
B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk
Links Bellow.
1/Unlock Bootloader
First you need the flash tool : Here (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When everything is ready...enable Usb debugging on your phone
Connect the device to your pc via usb and run the tool.
---Select option 1 (so insert 1 and press enter) to install the new fastboot partition, which is able to unlock your device if you install an unsigned kernel / recovery.
---Select option 2 if you haven’t enabled usb debugging, or if you have previously flashed an unsigned partition and now your device isn’t booting.
---Select option 3 to flash a custom kernel you have previously renamed to boot.img and put on your desktop. Do NOT use dd dumps : which means do NOT use boot.img you can find in flashable rom zips.
---Select option 4 to flash a custom recovery you have previously renamed to recovery.img and put on your desktop. Do NOT use dd dumps neither here.
---Select option 5 to check if bootloader is locked, unlocked or relocked.
Congratulation...your phone is unlocked !
2/INSTALL TWRP AND ROOT
TWRP Recovery : Gdrive
Alternative TWRP Recovery : Gdrive ( Use Ctrl + S) to download and keep them in the same folder
Now after unlocking the bootloader close the unlocktool and reboot the phone in fastboot mode
After that :
1/ IF you used the first link recovery Rename the file to recovery.img ...put it on the same folder and use the unlocking tool to flash it
2/ IF you used the 2nd link (Alternative recovery) you can just run flash.bat and it will do the work
after installing recovery :
go to wipe menu...then advanced and wipe only dalvik cache
now reboot
if your phone is rooted choose do NOT root and reboot
if yours is not rooted :
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :https://huaweiascendg615.wordpress.com/
How to use chineese recovery for non chineese :Here
NOTE : I NO LONGER USE THE U9508 !
I've Bought a Samsung A5 A500FU
Credits :
TWRP team
Batty86 for his amazing tool and roms that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
Hit :good: if i helped you

hello and thanks, do you have the file for bootloader unlock?? link is down

mimminou said:
Hello all xda devs and rookies
Today im showing you how to root and install TWRP 2.0.6.0 (Bootloader unlock too) on Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed...
-(Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on : B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk.
1/Unlock Bootloader
First you need the flash tool....Link Here (Link in first post) (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When every thing is ready...enable Usb debugging on your phone
Power off your phone; unplug the battery and replug it and boot up your phone in fastboot mode (power button + volum down)
Plug your phone in your computer and run flash.exe
choose 1 for chineese
choose 2 for english
Now choose unlock phone
after that choose fasboot option
Wait ~7 seconds and the phone will reboot
Congratulation...your phone is unlocked
2/INSTALL TWRP AND ROOT
Now after unlocking the bootloader you need to close flash.exe and reboot again your phone in fastboot mode
After that...open flash.exe and choose install TWRP V3 RECOVERY
NOTE : Do NOT choose Twrp touch version because its a little buggy and unstable (experimental users only)
now after the phone reboots...close the tool and reboot the phone in recovery mode using power + Volum up
go to wipe menu...then advanced and wipe only dalvik cache
now reboot to system....the recovery will notice that the phone is not rooted...
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
Credits :
GenoKolar for his amazing tool and recovery and unlock script
TWRP team
EternityProject team for sharing this tool
Batty86 for his rom that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :here
How to use chineese recovery for non chineese :Here
#sorry for bad english....im using my phone
Hit :good: if i helped you
Click to expand...
Click to collapse
got a new link for the flash tool? thhanks

hello bro flash toool link not working

This Thread is discontinued so i decided to update the unlocking methode one more time

fastboot help

I was flashing TWRP
I couldn't boot into system after flashing..
This is what I did:
1. fastboot boot recovery.img
2. Swipe to allow modifications in twrp
3. Flash TWRP installer zip
4. Reboot into partition B
5. Reboot bootloader
6. fastboot boot recovery.img
7. Swipe to allow modifications in twrp
8. Flash TWRP installer zip
9. Then I rebooted into recovery to check if recovery boots and it did.
But afterwards couldn't boot back into system. It was again booting into recovery.
I booted into recovery using fastboot boot, that's why it might won't boot into system. Is there a command to boot into system after above procedure?
Files used: https://m.youtube.com/watch?v=tRcYUMBgvaI
? How to Root Mi A1! Unlock Bootloader, TWRP Recovery ... - YouTube
By Dhananjay Bhosale
Kindly also suggest source of files you used, if you know another working method.

I have the same problem. Meanwhile, flash the stock fastboot images.

Why do you want to have TWRP installed? I am following these steps each month (fastboot ROM was always out sooner than my OTA) without any issues.
1. flash stock ROM via fastboot
2. fastboot boot twrp-3.1.1.img and don't allow system modifications or you won't be able to apply OTA
3. install magisk 15.1
4. reboot to system
If first boot takes more than 2-3 minutes, hold power off button until phones restarts, second start will take the usual time.

I also don't allow any modifications from TWRP, and just boot to TWRP when I need to. I do not install TWRP.
Sounds like you'll have to do a miflash of the rom, then try not installing TWRP and not allowing any modifications in TWRP to system. Just use TWRP to flash Magisk.

TWRP AND STOCK RECOVERY & USING Dual Boot Manager

Here we go !
TWRP Official for MOTO E 4 mediatek version
Disable dm verity.zip to avoid bootloop to disable verified boot
Stock Recovery in case you lost it somewhere during flashing other recovery that is corrupted or unstable or interrupted process resulting bricked device
To flash boot use : booting to fastboot mode
Enter fastboot devices to confirm adb connection
Now copy file to same adb folder all files
Use code : fastboot flash recovery ***filename***.img
Now with TWRP Official you can flash zip for
Magisk or Super Su pro
Stock boot image flash using flashify to use boot here https://forum.xda-developers.com/attachment.php?attachmentid=4360095&d=1513222799
:good:

Leeco Le Pro 3 x720 with no recovery and booteable android

Hi,
Today I tried to flash my recovery using the latest twrp:
twrp-3.2.2-0-zl1.img
I used the fastboot tool following these steps:
https://www.google.com/amp/s/forum....pro3/how-to/leeco-le-pro-3-root-t3476560/amp/
After doing that, my phone seemed bricked, there is no way to enter to the recovery non to the bootloader mode.
Pressing the power bottom for 1 minute, I could boot the system, which the only thing that is working as normally.
All the methods to install a recovery I've seen requerie to switch to the bootloader mode, what can I do to reinstall a twrp recovery?
Thank you.

Dioniso said:
Hi,
Today I tried to flash my recovery using the latest twrp:
twrp-3.2.2-0-zl1.img
I used the fastboot tool following these steps:
https://www.google.com/amp/s/forum....pro3/how-to/leeco-le-pro-3-root-t3476560/amp/
After doing that, my phone seemed bricked, there is no way to enter to the recovery non to the bootloader mode.
Pressing the power bottom for 1 minute, I could boot the system, which the only thing that is working as normally.
All the methods to install a recovery I've seen requerie to switch to the bootloader mode, what can I do to reinstall a twrp recovery?
Thank you.
Click to expand...
Click to collapse
Had the same issue. I just flashed TWRP img through AIO tool
And all works now

Deleted,
I thought you were bricked. Use the AIO tool
Easy Way to do this with one tool
@mauronofrio built an excellent tool for keeping your drivers and adb up to date. Plus it will give ADB system wide privileges.
Mauronofrio's tool is called: "TOOL ALL IN ONE"" and it's great,
After you install it, make sure to check for updates.
Get it here: https://forum.xda-developers.com/le...auronofrio-t3580611/post71627491#post71627491
XDA Main Page:*https://forum.xda-developers.com/le-pro3/development/tool-tool-one-mauronofrio-t3580611
* The all is one tool is excellent and you can use it to install everything you want.
* You can use it to unlock the bootloader.
* Install TWRP,
* Fast your Rom, Gapps and Magisk etc.
* The tool will also update your existing installation of ADB, Android Drivers, and provide system wide ADB privileges.

Problem solved, thank you

root xiaomi mi 9T

Hi everybody
I come back on my concern to root my Xiaomi Mi 9T under miui 11.0.3.
I managed to root it by installing the magiskmanager.zip by the recovery twrp.
Here are the manips that I made via fastboot.
-Fastboot devices
-fastboot flash recovery twrp.img
I restart in the recovery manually because doing fastboot reboot recovey twrp.img it does not work.
So I install magiskmanager.zip
All is well for the moment I am rooted at startup.
May the worry is that the recovery does not stay when I restart in recovery mode I fall on the original one.
So suddenly I redo everything from the beginning and in magiskmanager I do the direct installation (recommended) and I download the app twrp on the playstore.
I download the twrp that offers and the flash via the application twrp and there surprise I restart recovery twrp mode.
Bizarre all these manipulations before it was much simpler.
Tell me if I made mistakes during my manips.
Sorry about the novel ...
Thanks for reading me

Use instructions from thread "root without twrp". Did that a few days ago and there was not a single issue. You can flash twrp (I used official) at the beginning via fastboot and you good to go.
Making long story short:
Unlock bootloader, flash twrp, flash ROM, install magisk manager, flash boot.img use magisk manager to patch boot and you got it