Hi everyone
This is how to unlock and install TWRP (root too) the Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed.
Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on :
B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk
Links Bellow.
1/Unlock Bootloader
First you need the flash tool : Here (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When everything is ready...enable Usb debugging on your phone
Connect the device to your pc via usb and run the tool.
---Select option 1 (so insert 1 and press enter) to install the new fastboot partition, which is able to unlock your device if you install an unsigned kernel / recovery.
---Select option 2 if you haven’t enabled usb debugging, or if you have previously flashed an unsigned partition and now your device isn’t booting.
---Select option 3 to flash a custom kernel you have previously renamed to boot.img and put on your desktop. Do NOT use dd dumps : which means do NOT use boot.img you can find in flashable rom zips.
---Select option 4 to flash a custom recovery you have previously renamed to recovery.img and put on your desktop. Do NOT use dd dumps neither here.
---Select option 5 to check if bootloader is locked, unlocked or relocked.
Congratulation...your phone is unlocked !
2/INSTALL TWRP AND ROOT
TWRP Recovery : Gdrive
Alternative TWRP Recovery : Gdrive ( Use Ctrl + S) to download and keep them in the same folder
Now after unlocking the bootloader close the unlocktool and reboot the phone in fastboot mode
After that :
1/ IF you used the first link recovery Rename the file to recovery.img ...put it on the same folder and use the unlocking tool to flash it
2/ IF you used the 2nd link (Alternative recovery) you can just run flash.bat and it will do the work
after installing recovery :
go to wipe menu...then advanced and wipe only dalvik cache
now reboot
if your phone is rooted choose do NOT root and reboot
if yours is not rooted :
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :https://huaweiascendg615.wordpress.com/
How to use chineese recovery for non chineese :Here
NOTE : I NO LONGER USE THE U9508 !
I've Bought a Samsung A5 A500FU
Credits :
TWRP team
Batty86 for his amazing tool and roms that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
Hit :good: if i helped you
hello and thanks, do you have the file for bootloader unlock?? link is down
mimminou said:
Hello all xda devs and rookies
Today im showing you how to root and install TWRP 2.0.6.0 (Bootloader unlock too) on Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed...
-(Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on : B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk.
1/Unlock Bootloader
First you need the flash tool....Link Here (Link in first post) (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When every thing is ready...enable Usb debugging on your phone
Power off your phone; unplug the battery and replug it and boot up your phone in fastboot mode (power button + volum down)
Plug your phone in your computer and run flash.exe
choose 1 for chineese
choose 2 for english
Now choose unlock phone
after that choose fasboot option
Wait ~7 seconds and the phone will reboot
Congratulation...your phone is unlocked
2/INSTALL TWRP AND ROOT
Now after unlocking the bootloader you need to close flash.exe and reboot again your phone in fastboot mode
After that...open flash.exe and choose install TWRP V3 RECOVERY
NOTE : Do NOT choose Twrp touch version because its a little buggy and unstable (experimental users only)
now after the phone reboots...close the tool and reboot the phone in recovery mode using power + Volum up
go to wipe menu...then advanced and wipe only dalvik cache
now reboot to system....the recovery will notice that the phone is not rooted...
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
Credits :
GenoKolar for his amazing tool and recovery and unlock script
TWRP team
EternityProject team for sharing this tool
Batty86 for his rom that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :here
How to use chineese recovery for non chineese :Here
#sorry for bad english....im using my phone
Hit :good: if i helped you
Click to expand...
Click to collapse
got a new link for the flash tool? thhanks
hello bro flash toool link not working
This Thread is discontinued so i decided to update the unlocking methode one more time
Related
First backup your all data ..
Note; first goto developer option /enable OEM unlock ,then continue below step..
Step 1:unlock your bootloader
Follow this totourial...this is the simple way..
https://youtu.be/SHIYKDfseaY
Step2: Root
Install this apk blow the link
Open and click Root
(Data or wifi connection compulsory)
https://drive.google.com/file/d/0B5QjTxPnbzHJUUx3WnFQMVJqWHc/view?usp=docslist_api
Now your device rooted
Step 3: flash twrp
Use flashify.apk available in playstore
Download twrp below the link
Twrp (recommended)
https://drive.google.com/file/d/0B5QjTxPnbzHJZ3AxLUZONU9OWm8/view?usp=docslist_api
Material twrp
https://drive.google.com/file/d/0B5QjTxPnbzHJelpxVkFnRXpvdkU/view?usp=docslist_api
Step 4: flash superSU
goto recovery (click volumeincrease+power button)
Then click recovery(volume down OK button)
Flash this zip download below the link
https://drive.google.com/file/d/0B5QjTxPnbzHJSk5odzlDUV9yTkk/view?usp=docslist_api
Finish your device get rooted and twrp ..
this method works after updating to marshmallow? also post some screenshots for verifying.
hmm..works
Try it ...but properly..follow the steps
Can anyone say?
The complete instruction for unlocking the bootlooder of pixel v1?on 6.0?
can't understand the video...
Plz help me i want to unlock the bootloder,flash twrp,and install xposed installer on my phne
Help me plz
On my Lava pixel v1 nothing happens when trying to flash it using sp flash tool or miracle. But it can go into fastboot mode. Tried using battery and without battery but nothing happens. Tried flashing in fastboot using commands but it says remote device is locked. How to flash it. Phone restarts after showing lava logo
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it
Thanks to:
Easyloy for Recovery
Ampher for idea
rgusev for bring to idea life
alximiktik for bring needed files
Flashing ROM with QFIL:
Getting ready:
Download and install on your PC:
vcredist_x86.zip
QPST_2.7.422.ZIP
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Turn off your Vibe P1.
Hold Volume Up key and plug in USB cable conected to PC.
Open Device Manager on PC (press win+r and type "mmc devmgmt.msc" without quotes) then seek Qualcomm Lenovo HS-USB QDLoader 9008 in COM & LPT ports.
If you can see Qualcomm Lenovo HS-USB QDLoader 9008, you are ready to flash!
Flashing ROM:
Downoad QFIL ROM ( for exampe one of this: https://yadi.sk/d/hY3kNWJGrnpCU?ncrnd=5389 ) and unpack it.
Find QFIL in your Stary menu and launch it.
Select Qualcomm Lenovo HS-USB QDLoader 9008 (COM*) port by using "Select Port..." button
Click "Browse..." near "Programmer patch" field and select prog_emmc_firehose_89**.mbn file from the ROM's folder.
Click "Load XML…" and select "rawprogram0*.xml" file and then select "patch0.xml" file.
Press "Download" button and wait untill it ends (reboot or "ready" message).
If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.
Flash unlocked bootloader & recovery:
Read "Flashing ROM" manual
Download P1a42_S272_160506_ROW_QPST (+uBL +Recovery + Root +region ) and unpack it.
If you have different ROM installed, then flash S272 (by selecting rawprogram0.xml) otherwise go to the next step.
Flash unlocked bootloader (by selecting rawprogram_unlock.xml) and reboot into ROM.
Open developers options and select "OEM unlock".
Also you can check Bootloader status by rebooting to bootloader and typing "fastboot oem device-info" (without quotes), if it still locked, then type "fastboot oem unlock-go" (without quotes).
After (and only then) bootloader will be unlocked you can flash custom recovery by one of following ways: by QFIL, selecting rawprogram_twrp.xml or bootloader (fastboot flash recovery recovery_twrp.img).
When recovery is flashed, you can get into it by holding Volume UP + Volume DOWN keys while booting or using "adb reboot recovery" console command (without quotes).
Advanced flash unlocked bootloader & recovery:
BootLoader unlock:
Download file: emmc_appsboot.zip
Unzip.
Add listed files from QFIL-ROM to the same folder:
prog_emmc_firehose_8936.mbn
gpt_main0.bin
gpt_backup0.bin
rawprogram0.xml
patch0.xml
Run rawprogram0-fix.bat
Flash using QFIL, by selecting rawprogram0_aboot.xml.
Sometimes you need to do extra staff:
Open developers options and turn on:
ОЕМ unlock
USB debugging
Download: unlock-bl.zip
Unzip.
Plug USB cable and run unlock-bl.bat
wait until "Ready!" or the window disapire
Ready!
Custom recovery (TWRP):
Method one, fastboot:
Download: TWRP-FB.ZIP
Unzip.
Run rec-inst.bat
Method two adb(Root needed):
Download: TWRP.ZIP
Unzip.
Run rec-inst.bat
Root (SuperSU):
If you suscesfully unlocked bootloader and flashed recovery then you can:
download latest SuperSU
Put it to you sdcard (do not unpack it!)
Reboot to recovery and install ZIP.
Region:
To find out which region is set dial ####5993# or ####59930# using stock dialer
To change region:
Put easyimage.zip to root of SDCard
Dial ####682# using stock dialer
To get back to stock (for updating, etc.):
Flash stock ROM with QFIL.
You can use s272 listed above, but you also need to download, unzip and change rawprogram0.xml file before flashing to get stock recovery!
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Teddy. said:
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Click to expand...
Click to collapse
It's ROW! ROW also based on Vibe UI, but china ROMs has newer versions.
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Sent from my Lenovo P1a42 using XDA-Developers mobile app
Teddy. said:
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Click to expand...
Click to collapse
You can't install root on 6.0 without TWRP, but if you don't need it, woy also don't need to unlock BL, so you cat just flash ctock ROM.
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Teddy. said:
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Click to expand...
Click to collapse
You don't need to do any backup. But if you come to 6.0 from 5.1, you better do!
I flashed ROM everything went good, next thing I flash twrp, works, installed supersu and now I'm left with a phone without OS. I cannot get into download mode using the volume up + usb method and also I can get into the recovery. What can I do?
EDIT: After about 26 hours of just non-stop searching I finally got it flashed again.It was a painful experience but if somebody wipes the /system partition, don't hesistate to pm to help you come back on track.
Thanks for the great tutorial !
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
pabgar said:
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
Click to expand...
Click to collapse
They are lead to the same end but using different methods: manual, auto, with root or without, etc.
Can i root it without unlocking bootloader???
deadman220 said:
Can i root it without unlocking bootloader???
Click to expand...
Click to collapse
You can root only 5.1. Unlocked bootloader is the only way for 6.0 ROW ROMs.
Is there a way to lock it back or it's permanent?
deadman220 said:
Is there a way to lock it back or it's permanent?
Click to expand...
Click to collapse
You are not unlocking bootloader, you just flashing already unlocked one. So you can just flash it back!
I must say that after Marshmallow update, Vibe P1 is the best smartphone I had ever
Smooth working, great battery life, no problems at all.
After flashing TWRP and applying super su I am struck at Lenovo logo tried clearing cache and dalvik cache too still same
Is fingerpint unlock working on MM after root ?
GPSSlovakia said:
Is fingerpint unlock working on MM after root ?
Click to expand...
Click to collapse
Yes! And I'm using it on rooted ROM and with unlocked BL. But there is one little caveat: you can't unlock device with your finger for first time after reboot (it is MM feature). But after first time it working fine!
Thx for this awesome work .. ur amazing bro
---------- Post added at 11:00 AM ---------- Previous post was at 10:32 AM ----------
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
MoemenMoemen said:
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
Click to expand...
Click to collapse
You need to go back to full stock, it's the only way to get OTA.
Please look at "To get back to stock (for updating, etc.):" at first post (just updated it)!
Many noobs New Users are experiencing Problems rooting Lenovo K3 Note on Marshmallow Rom. So this tutorial will help them Root Lenovo k3 Note and install Custom recovery.:good::good::good:
This is not a cookbook, You need to know what are you doing. Neither I nor XDA is responsible for BRICKED Devices.
Downloads:
Boot.img
SP Flash Tool
(optional)Lenovo K3 Note Stock ROM
Recovery
ADB AND FASTBOOT
Patience
Now to Root Your phone Follow These Steps:
(OPTIONAL) Flash Your Phone with Stock Rom, To do this follow these steps :
Install All the required Drivers.
Download the LENOVO K3 NOTE FIRMWARE from Above.
Now Extract SP Flash Tool And extract FIRMWARE Folder inside it.
Now Run flash_tool.exe as Administrator.
Go to Options>Download> And check both the checkbox(s).
Now Click On Scatter-Loading and navigate to Firmware>target_bin>and select MT6752_Android_scatter.txt .
and click on DOWNLOAD.
NOW connect your Device Powered OFF to your computer and Wait Till a Box Appears Saying "Download OK".
Turn ON your Mobile and complete the initialization.
Now Download the Recovery, Extract it, and load its scatter file in the SP FLASH TOOL with the same config.
And again connect the phone Powered OFF after clicking Download Button.
When it completes. Try to Boot into recovery (by holding VOL+, VOL- and Power button simultaneously).
IF TWRP boots You are good to Go. :good::good::good:
Now Reboot into system and open Settings>DEVELOPER Options and click on USB DEBUGGING and ALLOW OEM UNLOCK.
Now Extract ADB and FASTOOT tools (and PLACE boot.img in the folder) and shift+right-click in the folder and select open command window here.
and type
Code:
adb devices
allow ADB to connect on your phone and then type
Code:
adb reboot-bootloader
Now your phone will reboot in FASTBOOT MODE type
Code:
fastboot devices
if it shows your device then type
Code:
fastboot flash boot boot.img
then type
Code:
fastboot reboot
After that switch off your Phone and boot into recovery.
Now install the SuperSU zip.
Hurray Your Phone is ROOTED.
If you Have Any Problems please Reply :crying::crying:
What's the encryption key of recovery file
Rishi.Nerd said:
What's the encryption key of recovery file
Click to expand...
Click to collapse
I have Updates the Links They should now be working fine.
Albert
Anunay.j said:
I have Updates the Links They should now be working fine.
Click to expand...
Click to collapse
..... i finish to root but my device wont start anymore
custom rom installation without rooting
I have s433 firmware android 6.0,
1. if I just want to install twrp ( without rooting), do I need to flash boot.img
2. if want to install custom ROM and still don’t want to root, do I need to flash boot.img
3. after a litte bit googling i found i need to have an unlocked bootloader and custom recovery for flashing custom rom ,
how do i unlock bootloader ( is boot.img fot that )
Hi,
I'm all new to rooting and I got a major issue.
Here's the story.
Wanting that substratum themes, I looked up for rooting my devices
I followed this guide to unlock the bootloader, and all was fine.
Next, I followed this one for rooting, but at the "installing nexus drivers" step, my PC wasn't showing off any driver setup or something related to a driver.
I pressed Enter, despite the fact that I didn't know if I had nexus drivers properly installed, and my phone didn't want to boot up. Stuck on the boot animation, for more than 20 hours.
Next day, I came back and found this mega thread about unbricking. I followed it, and now I'm in a boot loop: my phone reboot 1-2 secs after showing the home screen, but I can still enter in fast boot mode. My phone is still unlocked and when I enter Huawei's eRecovery (by long-pressing up volume button) to try to "Download new version and recovery" it connects to my Wi-Fi, then fails.
Thanks for your patience,
Mx3_
Do I understand correctly? Do you wont root your phone ?
1 st. With method which presented, you can only root your device if you have Android 5 or lower, if you have android 6 Marshalow - you must use " Systemless ROOT"
2nd. You must upload new ROM on your device ( i have special tool for do this "srktoolHuawei" - this is a special tool for flashing every new rom on a huawei device )
3.rd." HuaweiUpdateExtractor" - this is a tool for extract new ROM ( roms for huawei, you can find in huawei webside ) - download rom for your device, extract by this tool, copy and paste inside folder of "srktoolHuawei"
Next...
Plug you device to PC by usb, go to recovery mode and if you have unblocked bootloader, should be writen:" Phone is unlocked" - > Open "srktoolHuawei", go to Command Prop and then:
- IMPORTANT !!! - you must upload files: SYSTEM, RECOVERY, CUST, BOOT - you can do this using that commands:
1. fastboot flash system system.img
2.fastboot flash boot boot.img
3.fastboot flash recovery recovery.img
4.fastboot flash cust cust.img
Reboot and system should starts correctly...
---------- Post added at 08:02 PM ---------- Previous post was at 07:39 PM ----------
If you wont to root your device with SYSTEMLESSROOT method, you should do like that:
1. If you upload recovery by "srktoolHuawei" - > download TWRP recovery and upload into your device ( copy and paste TWRP img. file into this tool folder insted of traditional android recovery file, next change name from TWRP, to just recovery.img and upload using command: fastboot flash recovery recovery.img )
2. Now - if you press volume + - and power together, you should have TWRP Recovery insted of Huawei Recovery, thats good...
3. Next...BETA-SuperSU-v2.62-3 - upload this version of supersu into your SD card...
4. Next - go to TWRP mod, next to advanced, next to Terminal Command and write command like this:
echo SYSTEMLESS=true>>/data/.supersu
Confirm this command and back to install ( this command means that you will install SuperSU and it will make systemless root for you )
When if you have install, then select supersu which you downloaded before and now simply flash it by TWRP, next reboot and you should installed supersu and rooted device...
I successfully rooted, thanks ! but now i installed a substratum theme (pixel ui), uninstalled some huawei apps and rebooted to apply effects, and i'm stuck again in a bootloop ! tried wipe cache with TWRP, but didn't work :/
Mx3_ said:
I successfully rooted, thanks ! but now i installed a substratum theme (pixel ui), uninstalled some huawei apps and rebooted to apply effects, and i'm stuck again in a bootloop ! tried wipe cache with TWRP, but didn't work :/
Click to expand...
Click to collapse
Please tell me you made a back up in TWRP if you did just use the RESTORE option in TWRP if not you will have to go through the above again to get back to stock but missing out flashing the recovery partition as yours is working.
When your phone boots make a back up in TWRP before trying out anything so its easy to recover
BaronDeLucifer said:
1. If you upload recovery by "srktoolHuawei"
Click to expand...
Click to collapse
Hello @BaronDeLucifer,
what do you mean with this? Do I need the srktool for rooting my P8 Lite?
With best regards