Database Users

Not a single other rom flashes succesfully

Hi Guru's ,
Sounding verry n00bish yes but halp needed
my HTC TYTN II had no secrets anymore for me so it was time to upgrade
I read up on kernels flashing etc and then descided to get on it
got Odin , insecure kernel (CF-Root 4.0.0.2) , and a rom (was villain 3.0)
did it all correct , kernel ok , yellow triangle and original os booted up ok
CWM , clear all and reset etc , install zip , succesfully and reboot
sticks in reboot , endless yellow triangle ...
oh wel , np , i'll redo it from original
all steps ok untill other rom , bam , stuck in boot
crap , so , again
I now descided to go for the CM 7.1 that was just launched "stable"
Other CWM and kernel from their Wiki , gives me a insecure boot (triangle) to original and ok
into CWM (4.0.1.5) , all steps again , install zip from sd card , no zip (while its on for sure !)
formatted all known formats and put zip on , doesn't see it
was pissed like **** then and re-done it serveral times , no go
tried , from stock again and again to get it working
and found the intermediate problem , CWM 4.0.1.5 !
did the >CF rooot 4.0.0.2 etc and found the zip on card that 4.0.1.5 didn't never see (wtf ?)
tried CM 7.1 then , succesfully ... reboot , nope stays booting yellow triangle
tried 2 other rom's then and a nightly CM 7.1 with the CF-root also , no show
what am I doing wrong , does anyone recognise this ?
and maybe this post is better to be in Q&A I now think

Welcome to the S2 community
So, CM 7.1 sitting on yellow triangle happened to me too, be sure to:
from clockworkmod recovery:
Wipe data/cache (factory reset)
Wipe cache
advanced -> wipe dalvik cache
mount & Storage -> format system
Then flash cm 7.1 again.
If it still sit down on yellow triangle, redo all the above, yes also the flashing (for the 2nd time in a row, i know) , and usually it will finally reboot in a working CM 7.1
Let me know if this helped or not
And yes, better in Q&A

Thx for the welcome
Let me go and redo this exactly as you said right now

a3ke said:
Let me go and redo this exactly as you said right now
Click to expand...
Click to collapse
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk

rembrandtlnx said:
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work

bruflot said:
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work
Click to expand...
Click to collapse
yes, As For my above instructions, seems for some reason 2x flash in a row are needed. But from when i format system, it works in a single flash
Sent from my GT-I9100 using Tapatalk

Yup, definitely need to flash the CM7 package twice in a row. My trick is to flash it once, then reboot into CWM again and flash the package again! Hope it all goes well for you.

I can happely confirm doing it all twice exactly in a row does the trick
Cm 7.1 (nightly 82) running smoothly
Can anyone confirm my idea on following :
when I start configuring contacts mailsettings etc and save then
Then do a nandroid backup (via cwm the same ???)
And I put a new rom or newer version of rom on it
If I restore , does it restore everything as a "mirror" or just the settings i made
If everything , is there a program that does what I mentioned (just the personal settings mailsettings ed ?

If you backup your ROM using CWM Nandroid recovery (booted using the volume up + home + power button combo), you will have a mirror image of everything on your phone right now. A Titanium Backup is useful if you were to transfer your user apps from one ROM to another after a full wipe; wise to do a full wipe moving from a different ROM to another.
You can restore your CWM Nandroid backup in case anything happens.
Another point I would like to add is if you are updating from an earlier version of CM7, you can just flash the upate package without any wipe. You will not loose data in the process.
Sent from my GT-I9100 using XDA App

[q] [ask] [need help sir]

Sir, my Ideos X5 Was Dead after flashing emmc boot for Optimus L7 *
How can i get my phone turn to life again ? I Only have
- A Laptop with Windows 7 OS
- USB Cable for My Ideos X5 and another USB Cable with hole like my Ideos
'Story"
"My Friend need to flash CWM Recovery for his Optimus l7, He goes to my home and do a experiment with his phone. I've download the all files for flashing the CWM for his optimus L7, then i click enter (it's program like a CMD / Doomlord root kitt). But that was my bad, i have connected my phone and his phone , and i don't know it, my phone was turned to green screen bootsplash with red and blue rectangle. my rom is aurora ics(that was the greatest ics for me )but this phone turned on without a signal, no simcard detected but in SimToolkit is detected my simcard [AXIS>Registration and blablabla] when i click regist, thats no happening, no regist form. Then i do flash The Most Clean CM7 , No signal again. then i do flash a stock rom with dload in internal sdcard, alwasy update failed, and then i try to place dload folder to external sd, pull out battery and do a flash with usb and i get 'Update failed". Trying to flash it to CM10, With repartition zip file. it's successfull but i have no signal again . After i reboot my phone again, my phone goes to blue screen and i can see inside image folder are nothing inside, i place all the image folder but i can go to cwm, flashing room (oh yea !) but after click reboot phone it's always booted to cwm :'(
Anyone sir, can all of you help me how to get my phone booted to homescreen then i can use it for daily use again / like normal again ? Anyway thanks for all the devs or modder for all your great work and great science
Please i need all of your help sir
*And sorry for my bad english

VickySullivan said:
Sir, my Ideos X5 Was Dead after flashing emmc boot for Optimus L7 *
How can i get my phone turn to life again ? I Only have
- A Laptop with Windows 7 OS
- USB Cable for My Ideos X5 and another USB Cable with hole like my Ideos
'Story"
"My Friend need to flash CWM Recovery for his Optimus l7, He goes to my home and do a experiment with his phone. I've download the all files for flashing the CWM for his optimus L7, then i click enter (it's program like a CMD / Doomlord root kitt). But that was my bad, i have connected my phone and his phone , and i don't know it, my phone was turned to green screen bootsplash with red and blue rectangle. my rom is aurora ics(that was the greatest ics for me )but this phone turned on without a signal, no simcard detected but in SimToolkit is detected my simcard [AXIS>Registration and blablabla] when i click regist, thats no happening, no regist form. Then i do flash The Most Clean CM7 , No signal again. then i do flash a stock rom with dload in internal sdcard, alwasy update failed, and then i try to place dload folder to external sd, pull out battery and do a flash with usb and i get 'Update failed". Trying to flash it to CM10, With repartition zip file. it's successfull but i have no signal again . After i reboot my phone again, my phone goes to blue screen and i can see inside image folder are nothing inside, i place all the image folder but i can go to cwm, flashing room (oh yea !) but after click reboot phone it's always booted to cwm :'(
Anyone sir, can all of you help me how to get my phone booted to homescreen then i can use it for daily use again / like normal again ? Anyway thanks for all the devs or modder for all your great work and great science
Please i need all of your help sir
*And sorry for my bad english
Click to expand...
Click to collapse
do
you have the pink screen? The best way to check is to remove the battery and the External SD card. Then plug in the power USB cable, press POWER and VOLUME DOWN button together. If the pink screen comes on then i think there is a chance.

badiyee said:
do
you have the pink screen? The best way to check is to remove the battery and the External SD card. Then plug in the power USB cable, press POWER and VOLUME DOWN button together. If the pink screen comes on then i think there is a chance.
Click to expand...
Click to collapse
Yes sir, i have working pink screen, i have replaces all inside the folder image , booted to stock recovery " formatting /data, formatting /cache , rebooting" then my phone only blipping bootsplash, tried to change the recovery.img with cwm it works fine sir, but after installation ROM form ZIp my phone can't boot up , only booted onto cwm again and again, can i do something different than what i've do now sir ?

Sir, after i do experiment, my phone can booted again ! but the problem is my phone always reboot automatically, it's i need to install another rom ? :angel:
* It seems the file inside image are corrupted 9 i think ) and it seems its need an amss.mbn , bcoz before i use new amss i don't get random reboot, older amss have i used is bigger than 30mB, but after i used new amss, its only 23,5mB

VickySullivan said:
Sir, after i do experiment, my phone can booted again ! but the problem is my phone always reboot automatically, it's i need to install another rom ? :angel:
* It seems the file inside image are corrupted 9 i think ) and it seems its need an amss.mbn , bcoz before i use new amss i don't get random reboot, older amss have i used is bigger than 30mB, but after i used new amss, its only 23,5mB
Click to expand...
Click to collapse
you are not alone in this case. Even I have the same problem. I think the files from Huawei are corrupted. What I do is after installing the ORIGINAL ROM for the first time, at the FIRST BOOT, i use the program "Super One Click" to root the phone, and then install the apks so that i can quickly change the recovery.img to TCRW and then proceed to install the custom ROM of my choice.
I really suggest you go for Miui / Aurora (both are ICS) as the Jelly Bean custom ROMs are just way too buggy.

badiyee said:
you are not alone in this case. Even I have the same problem. I think the files from Huawei are corrupted. What I do is after installing the ORIGINAL ROM for the first time, at the FIRST BOOT, i use the program "Super One Click" to root the phone, and then install the apks so that i can quickly change the recovery.img to TCRW and then proceed to install the custom ROM of my choice.
I really suggest you go for Miui / Aurora (both are ICS) as the Jelly Bean custom ROMs are just way too buggy.
Click to expand...
Click to collapse
Haha, u are the Great , sir. I Have installing another rom, and then i got auto reboot, i click power off but i get reboot again (hahaha) , shutting down then rebooted again
I Think :
- The problem Internal SDCARD(EMMC) partition was bad, so the phone can't recognize what is the real internal sd card and the phone do a reboot
- And other files from image folder (like AMSS,EMCC, Or Cust or whatever) are not compatible with my base ( b526)
*i'm trying to install stock-partition.zip for re-partitioning my internal sd to the stock, but after i do flash zip files for many times are no effect was take
sir, i need a working stock partition zip file. have u partition/re-partitioning ur internal sd card sir ?>

VickySullivan said:
Haha, u are the Great , sir. I Have installing another rom, and then i got auto reboot, i click power off but i get reboot again (hahaha) , shutting down then rebooted again
I Think :
- The problem Internal SDCARD(EMMC) partition was bad, so the phone can't recognize what is the real internal sd card and the phone do a reboot
- And other files from image folder (like AMSS,EMCC, Or Cust or whatever) are not compatible with my base ( b526)
*i'm trying to install stock-partition.zip for re-partitioning my internal sd to the stock, but after i do flash zip files for many times are no effect was take
sir, i need a working stock partition zip file. have u partition/re-partitioning ur internal sd card sir ?>
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2145187&page=124
best to go here. It has both the files you need. I would recommend Forumber's partition.zip.
Go to recovery
Flash forumber's partition.zip
reboot recovery
flash forumber's partition.zip again
reboot recoery
delete the cache, system, data
reboot recovery
install custom rom
reboot into custom ROM (first boot)
WIN!

badiyee said:
http://forum.xda-developers.com/showthread.php?t=2145187&page=124
best to go here. It has both the files you need. I would recommend Forumber's partition.zip.
Go to recovery
Flash forumber's partition.zip
reboot recovery
flash forumber's partition.zip again
reboot recoery
delete the cache, system, data
reboot recovery
install custom rom
reboot into custom ROM (first boot)
WIN!
Click to expand...
Click to collapse
Ya sir i can't partition ,my internal memory apps has 1Gb, different than the partition from the link. now i'm using my last rom, CM10 0.03 by Oguzhan (That was great but wifi not works)
And my problem are come again, Auto-Reboot, while i used cwm for long it will reboot, when i do something on my phone keep reboot. trying to charging it with data,cache,system wiped, and changed all image folder rebooted again.
so,i know my problem is :
- The files inside image folder are not compatible, before i used the amss.mbn with a large size , more than 30mb(last before i deleted my amss, it has size 40mB+ )
I'm on Gingerbread Based B526, but i've deleted the amss and anything inside image, try to download the original image folder but it's from based b160 or something and it's size is 23,5mB sir can u help me which the rom based now u have used ? B526 or something ? If u on B526/B528 Sir, plzz upload all files inside image folder from based b526, maybe it will fix auto reboot my phone,

I cannot help much because i don't understand the amss.mbn
I used the b526 from Huawei and it was buggy. I don't know how to help you further from here.

badiyee said:
I cannot help much because i don't understand the amss.mbn
I used the b526 from Huawei and it was buggy. I don't know how to help you further from here.
Click to expand...
Click to collapse
*Edit. i've found the image files for the B526 sir ! better u save it for siege sir. i hope this will help you next time if ur device stucked on blue screen again
http://www.mediafire.com/download/41fw5elihq6qzli/image_35_(B526).zipNow, my devices cannot be turned on like a normal again, i've changing the amss and another files inside, but there is no effect was takes. reboot and reboot :'(

Fix error installing STOCK GAPPS on Oreo ROM

Hey,hey,hey
Did you facing error while installing Full Gapps or Stock Gapps? which says installing gapps error because not enough system partition size.
Yes,i'm facing that bug too,but i have a solution for this issue.That bug can be happen because after flashing any Oreo ROM your system partition become smaller,sure that is not normal.
To fix this you need to "resize" your system partition. I almost resize my system partition using an "Extreme Way!" and if i do that maybe my phone goes bricked. Thanks to god i can found what the problem after try "try and error" method so it can be said,this solution I found because of accident.Ok enough
Ok this the simple method.
1. Download Flashable Busybox by @YashdSaraf https://sourceforge.net/projects/busybox-yds/files/Sep-06-17/Busybox-1.27.2-YDS-UNIVERSAL.zip/download original thread https://forum.xda-developers.com/android/software-hacking/tool-busybox-flashable-archs-t3348543
2. Flash your Oreo Custom ROM
3. Flash the flashable busybox.
4. Go to Wipe option
5. Check "system" partition
6. Press Advance Option > press "Resize" (don't worry,you don't need to reflash the rom)
7. Go to Wipe option again
8. Check "system" partition again
9. Press Advance Option > press "Repair"
10. Then,install the GAPPS ,and you can bit this Oreo with GAPPS berry Jam.
This method work perfectly for me.
This should work on Z00L and Z00T :good:

error 1 when repairing the partition. But it still worked. Thanks

Ichijou Raku said:
2. Flash your Oreo Custom ROM
3. Flash the flashable busybox.
4. Go to Wipe option
5. Check "system" partition
6. Press Advance Option > press "Resize" (don't worry,you don't need to reflash the rom)
7. Go to Wipe option again
8. Check "system" partition again
9. Press Advance Option > press "Repair"
10. Then,install the GAPPS ,and you can bit this Oreo with GAPPS berry Jam.
This method work perfectly for me.
This should work on Z00L and Z00T :good:
Click to expand...
Click to collapse
Hey does I need to do this every time when I installing stock gapps?? Or only for the first time??

mg712702 said:
Hey does I need to do this every time when I installing stock gapps?? Or only for the first time??
Click to expand...
Click to collapse
Same question here.

raiden_1115 said:
Same question here.
Click to expand...
Click to collapse
Bro....I just test it and yes you have to de this everytime when you installing oreo....and I didn't flash the busybox....but I successfully resize it.....then the question is what's for the busybox is??

Doing this every installing oreo is,yes...
I think,cannot resize partition is only happened when upgrading Nougat to Oreo ,because every changing an oreo rom to another oreo rom,I dont have to install busybox again..
Busybox...mmmmm try flashing oreo rom after a nougat one,then resize Partition you will facing an error code on twrp say "resize error blablablabla" (or another,im forget what it say) ,for that,im thinking why i cannot resize the partition,While still in nougat I still can resize partition without any problem..And as you know, busybox contains a number of commands that can run in the terminal, and "resizing command" is contained within the busybox ..
Oh,im not responsible with any error after trying this method,But all this time I have never experienced any errors because this method..

Im still a newbie on android,i dont have a lot experience on android..As I said ,i found this method by trying "try and error" method,trying installing nougat first then oreo,trying installing boot.img first then oreo,and much more attempt..and i still got same error hahaha.. frustrated because cannot installing large gapps..
Then i found this method,just try this method and tell me if you found an error after trying this method..
But I can be sure it will not happen just because resize the partition, because resizing partition here instead of changing the size of partition system becomes bigger,Resize here only returns the size of the corrupted partition system

i got an error when resizing and repairing on my lg v20 h918, I still followed steps and ended up with the error after gapp installation. I am back to a blinking black screen after the lg logo. I think my phone is a lost cause.

bootloop on any custom rom for ZF 2 550 KL - please help me

Hi, I just get this phone in the latest update and wanna use custom rom on it.
I have unlock bootloader, install TWRP successfully, root it.
But every time I install any custom rom, it goes to bootloop.
I wipe everything clean, system, data, cache, ...
Maybe I miss some step ?
Can you guys help me ?
Thanks a lot
got an answer - thank @patrapatra so much
patrapatra said:
after installing any custom rom
go to mount mark on system
and go twrp file manager on setting
system>etc>firmware and delete the first three folders i don't remember it's name
enjoy your rom <3
Click to expand...
Click to collapse

Hi,I have a Galaxy J7 (SM-J700F) That I am modding

I have Install Liniange Os and CrDroid but they did'nt First Boot for Agesssssssssss Like OVERNIGHT can anyone help ( I have :
1.wiped EVERYthing (cache etc.)
2.Re flashed both of them)
Or can anyone send Stock ROM

Okay , flashing instructions:
When you go to TWRP, go to the "Wipe" section
At the wipe section, click:
System
Cache
Data
Dalvik / ART cache
And swipe.
After that , YOU DON'T NEED TO INSTALL BOTH ROMS!
Install only one. For example, install LineageOS. You don't need to install both of them.
After you flashed LineageOS, reboot, and it should boot in ~10 mins

notnoelchannel said:
Okay , flashing instructions:
When you go to TWRP, go to the "Wipe" section
At the wipe section, click:
System
Cache
Data
Dalvik / ART cache
And swipe.
After that , YOU DON'T NEED TO INSTALL BOTH ROMS!
Install only one. For example, install LineageOS. You don't need to install both of them.
After you flashed LineageOS, reboot, and it should boot in ~10 mins
Click to expand...
Click to collapse
Wydm By BOTH roms?
in liniage os and CrDroid there were only 1 rom and Yes i did wipe it as you had told
still the problem persists
can you send any sutiable rom if possible?
(Edit )
By the Way i have the phone right next to me doing it for the last 1 hr ish
and thanks for replying!

itsgamerme said:
Wydm By BOTH roms?
in liniage os and CrDroid there were only 1 rom and Yes i did wipe it as you had told
still the problem persists
can you send any sutiable rom if possible?
(Edit )
By the Way i have the phone right next to me doing it for the last 1 hr ish
and thanks for replying!
Click to expand...
Click to collapse
How did you flash the rom? can you tell me the instructions?

notnoelchannel said:
How did you flash the rom? can you tell me the instructions?
Click to expand...
Click to collapse
in TWRP first I wiped then went to the install i put the zip on an sd card so i chose the sd card then the rom after that install then lastly rebooted

I figured it out first you have to Update to android 6 First for some reason

itsgamerme said:
I figured it out first you have to Update to android 6 First for some reason
Click to expand...
Click to collapse
oh yeah. its because the rom wouldn't boot without android 6 fw. Wish you a happy new year btw!

notnoelchannel said:
oh yeah. its because the rom wouldn't boot without android 6 fw. Wish you a happy new year btw!
Click to expand...
Click to collapse
Thx You too