Moonlight - black screen when host PC's display turned off - M.O.J.O. General

I got Moonlight to connect to my Alienware Steam Machine, but if I turn off the display that is connected to it, I get a black screen on my MOJO (I can hear sound though).
Any fix for this?
Sent from my SM-G955U using Tapatalk

Related

Xoom with ICS 4.04 - Hdmi out appears cropped!?

Wondering if anyone else is having my problem?
If i can remember right, my hdmi out to my tv would completely mirror my xoom screen. This was when i first got ICS 4.0.
Now i have had the updated 4.04 since release, but i noticed my hdmi out to tv appears to be cropped. The screen appears to be zoomed in and it is not mirroring my xoom screen anymore.
Has anyone else run into this problem? Is there some kind of setting that i need to change?
Also would my hdmi connector cord cause this? I am using a different cord then before?
Tikal769 said:
Wondering if anyone else is having my problem?
If i can remember right, my hdmi out to my tv would completely mirror my xoom screen. This was when i first got ICS 4.0.
Now i have had the updated 4.04 since release, but i noticed my hdmi out to tv appears to be cropped. The screen appears to be zoomed in and it is not mirroring my xoom screen anymore.
Has anyone else run into this problem? Is there some kind of setting that i need to change?
Also would my hdmi connector cord cause this? I am using a different cord then before?
Click to expand...
Click to collapse
Try turning off overscanning on your tv
Yaarp, aspect ratio too.
same problem with me (and tried adjusting screen aspect ratio) doesn't show system/notification bar and a slight amount of screen real estate above it. I can see all of the first row of icons though, just nothing below them.
Same problem for me... Missing half the icons on left and right hand side...
Very noticable when watching videos as well....
Just an fyi guys its a TV thing, I have two TVs on one I can change and adjust the picture size and aspect ratio and no matter what its cropped and cuts off left right top and bottom... however on a newer insignia I have I can have it set to 16/9 and it cuts everything off as well, however if I turn it to "fit scree " I have the hole picture without any missing area
Sent from my Galaxy Nexus using Tapatalk 2
I would agree but my HDMI socket is shared between my xbox/blu-ray and Xoom and the others are fine.. no cropping at all only the Xoom has the problem...
Sent from my Xoom using Tapatalk 2
stiflingcobra said:
I would agree but my HDMI socket is shared between my xbox/blu-ray and Xoom and the others are fine.. no cropping at all only the Xoom has the problem...
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
If u look close enough it does, u just can't tell because how do u know what "should be displayed if u don't ever see it, the only reason u say it does it only on the Xoom is because u know what should be there.
I deal with this on a daily basis,
Sent from my Galaxy Nexus using Tapatalk 2
Tikal769 said:
Wondering if anyone else is having my problem?
If i can remember right, my hdmi out to my tv would completely mirror my xoom screen. This was when i first got ICS 4.0.
Now i have had the updated 4.04 since release, but i noticed my hdmi out to tv appears to be cropped. The screen appears to be zoomed in and it is not mirroring my xoom screen anymore.
Has anyone else run into this problem? Is there some kind of setting that i need to change?
Also would my hdmi connector cord cause this? I am using a different cord then before?
Click to expand...
Click to collapse
motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/63776/kw/hdmi/p/7901%2C8013
HDMI Mirror mode
When using HDMI, the bottom 80 pixels of the display where the navigation keys and notification menu are displayed is not projected on the external display. This is done by design and is not a defect with either the device or the external display
Just got a work and play kit for my Xoom 2 ME and it does the same thing. Bit of a shame really, I hear notifications come in but either have to look at my phone or recognise the notification sound to try and find em.
---------- Post added at 04:31 PM ---------- Previous post was at 04:26 PM ----------
Although I can just put my mouse in the bottom right and click, doh!
Find what your TV manufacture calls over scanning and turn it off. In my lg the option to turn off is to select just scan. FYI you should do this anyways in order to get true pixel mapping from all your sources
Sent from my Nexus 4 using xda app-developers app
same problem here :/

[Q] External HDMI Output problem

Using my Acer A500 whenever I connect it using the Micro HDMI it does appear on the screen but it seems to have part of the screen cut off. The status bar on the bottom of the screen and then about the same space on the top and sides.
Is there anything you can get for a root ICS tablet to change the output?
Could it be the cable I am using a 10ft cable?
Or this just what it looks like does the whole screen just never fit.
The TV is a 37 inch HD ready Beko
It outputs at 720p. Does your TV support that resolution?? I have had none of the problems your describing while using the HDMI out.
cruise350 said:
It outputs at 720p. Does your TV support that resolution?? I have had none of the problems your describing while using the HDMI out.
Click to expand...
Click to collapse
It does support it as my Xbox output is 720p and when the tablet is connected it says on the tv its output is 720P 60HZ.
any other ideas?
I have the same issue butnot with my TV. My TV will show the entire screen but when I plug into a projector it cuts off part of the screen. I would not think the HDMI out is device dependent but it is certainly looking like it.
Not sure if you checked this, but this happened to me yesterday. What had happened was that the zooming on the TV was causing the problem. It was on 16:9, and cut off some parts. Went through the zooming options until I found one that showed the entire screen (can't remember what it was called).
rikponne said:
Not sure if you checked this, but this happened to me yesterday. What had happened was that the zooming on the TV was causing the problem. It was on 16:9, and cut off some parts. Went through the zooming options until I found one that showed the entire screen (can't remember what it was called).
Click to expand...
Click to collapse
on a,LG,phillips its original zise a samsung: full screen
Im having the same issue as well, 37" Panasonic LCD. Its fully capable of 1080p as well as 720. I remember connecting my motorola atrix and droid bionic to the TV and both those phones have an HDMI setting --> Overscan setting that you adjust using a slider. With those 2 phones however they problem wasn't the screen getting cut off, it was too small, and adjusting the overscan as high as it could go made the output from the phone fit the tv PERFECTLY.
In our instance, we would need that same overscan slider, and to turn it down. BTW: that setting on the phone was set in the middle by default (say at 50%), so the phone would need it adjusted to 100%, where as our tablet would need it at 0 or near zero...

Screen Lock while playing video

Not sure if this has already been addressed? I am looking for a App or some sort of control on my tablet, so that when I am watching videos it locks out the screen. My daughter is almost 1 year old, and likes to watch Mickey Mouse on my tablet. The issue is, she likes to hold my tablet, and ends up turning off Mickey. I wanted to be able to disable the touch screen, or have a certain area to activate the touch screen again. Not sure if there is a app like this? Thanks for any help!
criminal666 said:
Not sure if this has already been addressed? I am looking for a App or some sort of control on my tablet, so that when I am watching videos it locks out the screen. My daughter is almost 1 year old, and likes to watch Mickey Mouse on my tablet. The issue is, she likes to hold my tablet, and ends up turning off Mickey. I wanted to be able to disable the touch screen, or have a certain area to activate the touch screen again. Not sure if there is a app like this? Thanks for any help!
Click to expand...
Click to collapse
This one work great.
https://play.google.com/store/apps/details?id=com.argotronic.touchblocker
Sent from my A500 using Tapatalk 2
I'm pretty sure mx player has an option on screen that allows you to lock it down while playing, I also find it to be a very nice, straight forward player that runs all my files nicely.
https://play.google.com/store/apps/details?id=com.mxtech.videoplayer.ad
More than that I've been searching for an app that turns off the display completely while hooked up over hdmi. That plus Ps3 controller = replacing the wii in my bedroom. Ha
Is this real life?

[Q] HDMI

I am curious i have a hp extreme slate 7, I plugged in the hdmi cable to watch movies on my tv and it works flawlessly however i am wondering if there is a way to shut off the tablet screen playing video while watching a movie on the tv? I thought it would be a good idea if it could do that but upon thinking about it more I dont think that it will because you have to shut down the touch screen. Please let me know if there is anything already on this subject or ideas. I have a usb keyboard and gamepads to actually navigate the websites and stuff if the screen is off just havent found anything on it yet. Thank You
There's an app called second screen which has an option to turn the backlight off, the touchscreen still works but it's a lot less distracting.

Chromecast screen off

I really want to chromecast op5 screen while its own screen is off. I got a USB c to female usb a adapter so i could connect keyboard and mouse and stuff. I've searched for 2 hours to somehow screen off (or brightness zero) my screen while I mirror the android screen but there is no such app or guide! just got p where people *****es their screen is brightness zero, not useful. (outdated screen brightness zero app on playstore don't work so pls don't bring that app here)
Not tried this. Just an idea that popped into my head.
If you somehow can get tasker to know you're casting you could use pixel filter app and set it to 100%. Your screen would be pitch black then.
That's not how Chromecast works unfortunately. It either does screen mirroring (where it displays exactly what your phone screen does), or receives a link (such as a YouTube video) to play it directly.
Basically it sounds like you're wanting something like Samsung's DeX docking station, but even that isn't wireless. There's no similar option for the OP5
Sent from my ONEPLUS A5000 using Tapatalk

Categories

Resources