Hi,
I've recently rooted my s7 edge (SM-G935F) and all seemed to go quite well until I uninstalled xposed and my phone went into an FRT lock. This was probably due to a wipe I did while rooting after which I forgot to enable OEM changes. To fix this I flashed firmware using Odin to this one G935FXXU1DQL8
Only updating PA, after which the lock was removed but I only had a samsung logo which I was unable to progress from. I waited until the battery run out (could not shut the phone down) and then booted into recovery mode and did a factory reset. The phone came back to life, but was weird.
Apart from loosing all of my app data (logins etc) the keyboard was wonky. It lagged and the predictive text would work in passwords, essentially eating every letter as I pressed it. The spellcheck wasn't working even tho it was selected. The keyboard would also lag, often taking 5 or more seconds to respond at first after which it worked fine but this only occurred during logging into an account, and the shift key never worked properly, and required holding down to capitalize as the one tap to do the first letter didn't work.
I didn't think too much of it and went back to trying to get myself sorted with xposed. The moment I flashed TRWP again, suddenly my internal storage disappeared. The phone no longer saw it and no matter what I did it was totally dead. I had to change the file system and remount in order for it to come back.
When I came back I flashed PA, SCS and CP and since then my phone has lost the ability to recognize a telephone carrier. Mobile networks is plainly missing from the options, and I do not get any bars, just a circle with a line through it. I have since then tried other firmware from sammobile such as G935FXXS1DRA5
And used samfirm to download the newerst one directly from Samsung all of which result in the same problem - No telephone carrier options, phone cannot make calls and I can't do anything about it.
Can anyone help in bringing them back? What did I do wrong? Thanks in advance.
Related
Hello,
My story is pretty much the same as other people here. 2 weeks ago I rooted my S6 edge + and everything was fine, the device was working I downloaded lots of apps that needed special root permission done a lot of ad blocking---- Long story short the root was successful with ODIN and everything was working fine, I didn't mess around with other parts of the OS tho. So today I was checking my snap chat when all the sudden my phone started lagging, it does that every once a while, it used to happen on my note 3 too its just Samsung bug. Anyways it was lagging so I decided to press the restart button, I put the phone on my desk and continued to finish my work on my laptop about half an hour later I checked my phone for snap chats, but i realised that it didn't turn back on. I held the power button and this came up on top left corner.
KERNEL IS NOT SEANDROID ENFORCING (this one showed up before every time I booted after my root)
CUSTOM BINARY BLOCKED BY FRP LOCK (this one was new tho, I never seen it before)
Which means Im F***** because Im on a bootloop, and my battery could die anytime...
So I've done a little researching and I came up with the conclusion that I can use ODIN to put Official stock firmware back on my phone, but as I think everyone knows. I don't think there is Official stock firmware for G928W8. Which is weird, its the only firmware left out by who ever creates or extracts official firmware off Samsung phones. I also tried using smart switch but the device is apparently is not supported, although ODIN recognises it. I tried re rooting, on my phone it said Custom Binary(BOOT) blocked y FRP Lock. So basically I paid $1,150.00 and my phone bricked itself after 2 weeks. No stock firmware for G928W8, and no luck with Smart Switch. I don't have any other phone to use while an original stock firmware gets released by XDA. I looked pretty much everywhere there is no G928W8 Stock Firmware. So any ideas I really need to make some calls?
Thanks,
Artin P
Hello,
I've been scouring these forums for a hot minute, spent about 6 hours last night alone trying to solve this. I've found a ton of useful information that's helped me get to where i am now.
Verizon SM-N900V Galaxy Note 3
5.0 Lolliop
build is OF1
So here's the issue: from a completely fresh ODIN flashed stock rom, wiped factory reset with volume up, power and home. When phone finally rebooted, it wouldn't activate. Called verizon, sent activation signal, phone activated and had 4G LTE. No problems. Power cycled phone for something, boots up and has no signal. IMEI is showing null/unknown. Phone has never had a custom rom or anything flashed to it before I did the stock rom flash most recently. (OTA wasn't working, kies wasn't working, etc.) I've done a ton of research, and it appears somewhere down the line my EFS partition became corrupt or some form of jacked up.
Last night, I attempted a fix i found so the phone is now rooted on stock rom, with supersu and busybox, all verified by EFS Pro. Unfortunately, I can't use any of the Qualcomm tools as it just says "phone not connected!" everytime i try. The EFS side of it reads everything just fine, let me play with samsung tools options and what not.
So currently the phone is fully activated, has signal and everything, I've backed up the EFS while its working properly.
What can i do?
I appreciate any help in advance.
Look on your main phone under the Verizon app the one you can check data upgrades ect. See if your note 3 is activated. You should be able to activate it yourself it may be suspended.
Sent from my SM-N900V using XDA Free mobile app
Folks I initially tried to root my phone *SM-G935F* using Odin and a CF hero2lte file. The flashing was all good to go with a green pass. Then upon rebooting the phone got stuck on the Samsung logo boot screen with red words at the top that said **Recovery Is Not Seandroid Enforcing**. This being the case all I was able to get into was (Download Mode). I tried to do the samething a few times and gave up after no successful attempts and the phone not being able to successfully reboot.
Fast forward to present I downloaded the phone's firmware which was a zip that contained 4 files (5 total actually because there was another CS file in the event that you wanted to preserve your data etc.). I loaded all of the files in Odin and made an attempt to flash the phone again however it got stuck on *System* and never go to Green *Pass*. So I figured I would try it a couple of more times in case Odin or something just got hung up on the first try. Any how that wasn't the case.
Now with the above being said what did change is when I would try to reboot into *Download Mode* again it said something along the lines of Emergency Smart Switch Recover. I downloaded Smart Switch onto my computer and went through the specific steps to try to Recover the phone using Smart Switch. Now after it was all done I got to the blue screen with the Android and it said *Erasing...* then the phone booted up and its now stuck at the Samsung animation screen. This being said as of current I can now access *Download Mode* and also boot into the black screen or *Recovery Mode* I think its called where I can reboot the phone through a bootloader, power off, factory data wipe / reset, etc etc.
The above being said I have tried the factory reset / wipe. The reboot in bootloader, reboot phone, all with no success.
Also would like to add that before doing all of the above I forgot to tick *USB Debugging* in Developers Mode when the phone was in its normal state. I must also mention that all of this was a first for me and I looked at doing so to try and recover lost data on my phone. Also wanna add that I am not too familiar with ADB or twrp or how to mess with any of that stuff given the limited access I have to my device because it can no longer bootup like it normally would.
I'm currently at a lost of words as to what I can do next as I am out of ideas and could really use some help. I would also be more than happy to donate a little to anyone who is able to help me boot my phone back up and get things back to normal.
Any and all help would be greatly appreciated.
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
Bro would you tell pls , what you did to restore. Thanks
shah22 said:
Bro would you tell pls , what you did to restore. Thanks
Click to expand...
Click to collapse
After me not being successful with the root or with flashing the stock OEM firmware using Odin the phone would get hung up in download mode and the only difference when it would go into download mode it would say to use SmartSwitch Emergency Recover which is what was used and that fixed the issue and the phone rebooted completely fine.
However the above being said I honestly still feel the phone has some small minor issues that I did try to resolve all with no luck. First off when loading to my home screen the icons, and clock, etc etc take about 2 or 3 seconds longer for them to appear on screen than it used like when the phone was new out of the box.
Other thing to note is for some odd reason this issue was thought to be worked out by just booting into recovery mode and doing a factory reset from there, wiping the cache, etc etc. Well this also didn't solve the issue and for some odd reason when performing this the phone didn't reboot on its own.
Basically how it should be normally is after you select that you want to do a factory reset, wipe cache, etc etc, the phone should normally reboot and go through the entire process by itself, however this was not the case. The phone instead went back to the recovery screen and I had to select reboot rather than it normally rebooting on its own.
I've honestly given up on things and given that it is in working order with just a few small minor hiccups I've decided to give the phone to a family member which they plan to use as trade-in credit towards a new Galaxy Note 8.
That being said I will always have a soft spot for the S7 Edge being it was my first smartphone after I had bought a Sony Xperia Z during the same year but returned it the day after because what was to me being poor quality of the Sony phone.
Hmm, looks strange bro , your phone didnt worked after flashing stock rom with odin , and this is the last resort , but you said it was normal before you tried to root , so i guess it was still a software issue other than some hardware problem due to software , but anyways wish you good luck in future , another thing is that my s7 edge has also a very poor build quality , has front camera issues , paint peeling around usb port , wifi issue and high battery degradation , but that happens i guess with today's phones
The version of Odin I used was v3.10.6. I had tried the most current version and a few others, and from the get go for whatever reason this was the only version that would actually pickup the phone being added. Well wait hold on a second the other version would say added when the phone was in but when hitting start nothing would happen, even after waiting an extensive amount of time, also note that the com was highlighted that blue ish color indicating the phone was being recognized by Odin but once again for some odd reason it was only version v3.10.6 that carried out the process of my root attempt and also the attempt I made flashing the original firmware on it.
As for quality the phone had no paint chip or peeling, neither the silver aluminum frame around it either. The build quality was beautiful and up to par with mine. I had a soft spot for my S7 Edge also because it was in the white color which at the time of purchasing was a bit more scarce than the other colors. I purchased the phone from an Amazon.com seller, and during that time I also purchased 2 others from other Amazon sellers but returned those because they had carrier animations for them that were Band LTE or Brand LTE, whatever its called.
This one had no carrier animation upon boot and turned out to be a UK Nougat model. Haven't really seen or came across another one since that would be from a trusted seller or source. Nowadays you never know what you're getting both on eBay and Amazon from these third party sellers.
Yeah thats really strange with odin , its good that you dont have quality issues which struck heavily on me , but yes everyone should be quite careful when ordering online and only should do with trusted resellers
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
vini3237 said:
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
Click to expand...
Click to collapse
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Hydranize said:
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Click to expand...
Click to collapse
Phone is SM-G935FD
I do not know what caused it, I already got the celuar so, in status it says Custom.
I already tried to blink for odin 3 different Stocks and the same thing continues.
When I got it it could not access the recovery mode, only the download mode was accessible, after flashing the Brazilian Stock 6.0.1 I was able to access recovery mode.
The phone turns on, and hangs at boot, Samsung logo, restarts and stays in infinite looping.
Can it be Hardware?
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Hydranize said:
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Click to expand...
Click to collapse
Ok now i think what was the problem , you didnt enabled usb debugging , and for flashing with odin its a must ! , for guys who want to flash firmware using odin .. please enable usb debugging in developer options or you will have much issues and may also brick your phone , so if you dont want to enable usb debugging or developer options , just use samsung smart switch on pc to flash your firmware.
Yeah that was my issue was I had OEM Unlock checked off and one other thing in Developer Options and forgot to enable USB Debugging leaving me stuck in the process when the phone couldn't reboot normally after the flash attempts. But yeah SmartSwitch Emergency Recovery should definitely be able to fix and resolve the issue if the phone can't reboot normally.
Hello fellow people of XDA!
Today I got an OTA update for my S7 edge (SM-G935F). The update has installed fairly fast (after the first reboot). But then, it got stuck on a decrypting loop. I have enabled prior the full phone encryption, and set it to ask for a password at each start. I entered the password correctly, as it said Starting Android... after, and since then, only the rotating padlock is showing. Every like 5 minutes the soft buttons are lighting up for a second, but then nothing is happening. After a while it even gets hot, but still nothing. I had this issue at the previous update too, but it started after like 30-40 minutes. Now 90 minutes have passed and still nothing.
I can reboot to the recovery and bootloader screens, and everything is fine. Knox not tripped, not rooted, everything official. In the recovery screen it says that my CSC is ECT (but according to sammobile it should be CNX).
Some additional info: samsung/hero2ltexx/hero2lte
7.0/NRD90M/G935FXXU2DRAG
I will try to flash a stock rom (PDA: G935FXXS2DRAA, CSC: G935FROM1DQJ3). If that doesn't work, I'll flash today's rom (PDA: same, CSC: G935FVFG1DQI1).
Any tips/help would be greately appreciated! Would not want to fall to the wipe data method, because I don't want to lose everything... But then again, I guess that would remove the boot password...
Thanks!
Update: After waiting for like 10+ hours, nothing has changed. Maybe I shouldn't have forced a reboot after an hour of the ota update? Going to try flashing the firmware now.
Update 2: I flashed the firmware, now the buttons seem to light up less often. But after an hour of decrypting, I guess the ultimate soultion would be to do a factory reset, since no one is helping...
jaszfalvi.tamas said:
Hello fellow people of XDA!
Today I got an OTA update for my S7 edge (SM-G935F). The update has installed fairly fast (after the first reboot). But then, it got stuck on a decrypting loop. I have enabled prior the full phone encryption, and set it to ask for a password at each start. I entered the password correctly, as it said Starting Android... after, and since then, only the rotating padlock is showing. Every like 5 minutes the soft buttons are lighting up for a second, but then nothing is happening. After a while it even gets hot, but still nothing. I had this issue at the previous update too, but it started after like 30-40 minutes. Now 90 minutes have passed and still nothing.
I can reboot to the recovery and bootloader screens, and everything is fine. Knox not tripped, not rooted, everything official. In the recovery screen it says that my CSC is ECT (but according to sammobile it should be CNX).
Some additional info: samsung/hero2ltexx/hero2lte
7.0/NRD90M/G935FXXU2DRAG
I will try to flash a stock rom (PDA: G935FXXS2DRAA, CSC: G935FROM1DQJ3). If that doesn't work, I'll flash today's rom (PDA: same, CSC: G935FVFG1DQI1).
Any tips/help would be greately appreciated! Would not want to fall to the wipe data method, because I don't want to lose everything... But then again, I guess that would remove the boot password...
Thanks!
Update: After waiting for like 10+ hours, nothing has changed. Maybe I shouldn't have forced a reboot after an hour of the ota update? Going to try flashing the firmware now.
Update 2: I flashed the firmware, now the buttons seem to light up less often. But after an hour of decrypting, I guess the ultimate soultion would be to do a factory reset, since no one is helping...
Click to expand...
Click to collapse
Wait, i dont get it, it is prompting you for a password even you didnt set it?
Sent from my S7 Edge using XDA Labs
shah22 said:
Wait, i dont get it, it is prompting you for a password even you didnt set it?
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I set a password when I enabled Secure Startup.
jaszfalvi.tamas said:
I set a password when I enabled Secure Startup.
Click to expand...
Click to collapse
Then use that same password, i think there is confusion, there is a password when you enable fingerprint and then a password when you enable secure startup. Be sure not to confuse them. If it still happens, then I guess there's got something wrong with the update, and only way is a factory reset. Btw, i also updated and i normally entered secure boot password and it started okay. Don't know what caused this for you.
Sent from my S7 Edge using XDA Labs
shah22 said:
Then use that same password, i think there is confusion, there is a password when you enable fingerprint and then a password when you enable secure startup. Be sure not to remember them. If it still happens, then I guess there got something wrong with the update, and only way is a factory reset. Btw, i also updated and i normally entered secure boot password and it started okay. Don't know what caused this for you.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I entered the password correctly, as it stated "Starting Android..." then the rotating padlock took forever. More than 10 hours even. But in the end, a factory reset helped me. But rip my photos and memories...
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
benjamen50 said:
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
Click to expand...
Click to collapse
Right, but i use encryption and i could update without any problem, don't know what caused this issue with him. But one should backup all data BEFORE updating, as i did to save yourself from such hassle.
Sent from my S7 Edge using XDA Labs
benjamen50 said:
Don't use device encryption anymore and leave OEM unlocking enabled in developer options.
Those two settings cause more hassle if you want to keep data, and make backups from time to time using Samsung Smart switch on computer. Use a microSD card to store and take all your photos from camera.
Click to expand...
Click to collapse
Yeah, it's a sure thing I won't turn on Secure Stratup anymore. I don't know what OEM unlock does or does not, but right now, I don't have dev options enabled. If I had a microSD then I couldn't care less about resetting my phone, but since I don't have, because I have two SIM cards and a memory card has no place left, I feel bad.
Still, I don't know caused this issue. I had OTA updates before with full device encryption enabled and I had no issues before. I kinda used the same disk space at every OTA, so it should have took the same time... And I have to mention, that I did not tamper with the software. No root, no custom rom, and software only from the play store.
To enable developer options you click Build number 7 times which is located in the Software information tab in settings.
OEM unlock allows you to flash and boot the phone with custom binaries (Custom Recovery, Kernels, Roms). You can leave OEM unlock disabled if you don't want people that may steal your phone and use it for themselves.
With OEM unlock disabled and a google account signed in, it will block anyone from using the phone after a factory reset on stock Samsung firmware as it will prompt the user to enter the google account that was associated with that device.
Unfortunately there are rare cases that a OTA update may fail. Reflashing correct stock firmware usually fixes it but in worse case scenarios a factory reset will be required.
benjamen50 said:
To enable developer options you click Build number 7 times which is located in the Software information tab in settings.
OEM unlock allows you to flash and boot the phone with custom binaries (Custom Recovery, Kernels, Roms). You can leave OEM unlock disabled if you don't want people that may steal your phone and use it for themselves.
With OEM unlock disabled and a google account signed in, it will block anyone from using the phone after a factory reset on stock Samsung firmware as it will prompt the user to enter the google account that was associated with that device.
Unfortunately there are rare cases that a OTA update may fail. Reflashing correct stock firmware usually fixes it but in worse case scenarios a factory reset will be required.
Click to expand...
Click to collapse
Never had OEM unlock enabled, because I didn't know what is does, so thanks for the info. I reflashed the correct stock firmware, but that didn't help either, so I had to resort to wiping the data... Regarding this, do you know by any chance a good software for recovering data without root?
I don't know of any unfortunately, if anyone has any good paid ones that actually work please post here.
Morning Guys,
Ive had all sorts of fun and games with this damn G950F every time i root it it throws up a problem.
It had just gotten to unlock time for the third time, but started throwing up 'SystemUI has stopped working' errors when i hit the 'app list' button. Didnt think much of it, and went to root. SuperSU took and was granting root permissions but would not update the binary. I fell asleep at some stage and didnt go back to it until this morning.
Went to use the phone this morning and its reset itself and thrown up a big red message about only having stock binaries installed. Queue about 7 hours of not being able to resurrect a phone that had spat out TWRP and now appeared to have a locked down bootloader again. Finally realised i could flash the stock XSA rom without the bootloader and resurrected the phone.
Fired it up, and its no longer detecting the SIM card, and *all* of the Mobile Network settings are missing. Cant find an answer to this anywhere. Im hoping like hell its a software issue (another non answered question i have is that i get weird ass settings options with strange labels and duplicate entries and options that crash the settings app after some re-flashes.
Anyway.. wat do plez?
Have tried - Factory resets and cache wipes both in UI and recovery. Reflashing AP, CP, CSC and/or CSC_HOME. Cant flash BL as its currently 'prenormal'. Keep reading the 'download mode, start odin, quickly hit buttons' trick but have never gotten it to work, and ill try it again right now to triple check but im 99.9999% sure it wont let me re-flash Nougat on it for the same reason.
Cheers in advance.
UPDATE - So it looks like something has accidentally'd the IMEI. Now looking for non root non bootloader methods to bring it back. Looks like thats my problem.