Related
OK managed to snatch one of the only/few tilts available in my area last Friday and now, after a week of use I've noticed I hate the ATT case I bought: The leather, plastic clip, top-loading case, SUCKS!
I work in an ER so speed, quality, ease of use is paramount. My major problem with this case is that 1. I press buttons trying to pull it out and 2. the belt clip is not centered well so when I try to orient it horizontally on my scrubs the opening end tips downward toward the floor.
SO, I've been searching around the forums, looked at a TON of different cases. So far I like the look of this: http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6562
BUT I don't like the plastic over the keyboard and how annoying is that flap when you're trying to talk on the phone? I don't want to be fiddling with a GD flap while talking. Does the flap flip all the way back on itself?
SO, I need a well-balanced, high quality plastic clip (quick releases are good), that does not have cumbersome flaps (or at least has flaps that fold back on the case/go away when used as a phone).
Thoughts?
Thanks
Does this case work for you?
http://www.boxwave.com/products/dlsleeve/htc-kaiser-designio-leather-sleeve_2642.htm
I received mine this week and am satisfied. There is no hole to access the reset button, but that's a minor issue.
skins07 said:
Does this case work for you?
http://www.boxwave.com/products/dlsleeve/htc-kaiser-designio-leather-sleeve_2642.htm
I received mine this week and am satisfied. There is no hole to access the reset button, but that's a minor issue.
Click to expand...
Click to collapse
It seems that you can't slide the keyboard out when using this case... am I mistaken?
h0mersimps0n said:
SO, I've been searching around the forums, looked at a TON of different cases. So far I like the look of this: http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6562
BUT I don't like the plastic over the keyboard and how annoying is that flap when you're trying to talk on the phone? I don't want to be fiddling with a GD flap while talking. Does the flap flip all the way back on itself?
Click to expand...
Click to collapse
I don't know about the book-style case, but I have the PDAir flip case, which has the flap hinge at the bottom. On that case, the front flap folds back very nicely. The snap strap on the top that holds the front flap closed doesn't fold back so well, but I've only had the case 2 weeks so it'll probably loosen up a bit over time.
dweinstock said:
It seems that you can't slide the keyboard out when using this case... am I mistaken?
Click to expand...
Click to collapse
To slide the keyboard, you do need to unsnap the cover and fold it back. The phone can still be left in the case. I rarely use the keyboard, but this could be a major issue for those that do.
skins07 said:
Does this case work for you?
http://www.boxwave.com/products/dlsleeve/htc-kaiser-designio-leather-sleeve_2642.htm
I received mine this week and am satisfied. There is no hole to access the reset button, but that's a minor issue.
Click to expand...
Click to collapse
Do you have any pics with your phone in it?
Have you had any problems with the belt clip screw coming loose?
I think I need something that protects the screen too... I'll have to think it over...
3WAYGEEK- thank you for the reply- that's exactly the info I was looking for, now I just need to find someone who has the side flap...
Thanks guys
h0mersimps0n said:
Do you have any pics with your phone in it?
Have you had any problems with the belt clip screw coming loose?
I think I need something that protects the screen too... I'll have to think it over...
3WAYGEEK- thank you for the reply- that's exactly the info I was looking for, now I just need to find someone who has the side flap...
Thanks guys
Click to expand...
Click to collapse
Sorry, I have no pictures. There are images without the phone on the Boxwave site.
There have not been any problems with the clip and screw.
I do use a screen protector, but this case does leave the screen open, a feature I was seeking.
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Kooper113 said:
I have a small mark on my Camera already, and I've been handling my camera with extreme care this whole week/weekend thus far. I already have a pretty small scratch (not across the lens thankfully?) and I have no idea how it happened! Been moving my phone around very gently.
Is there anything I can do about the tiny scratch, or do I just have to live with it? I get pretty OCD about small things like this, so I need to make sure there's nothing I can do to try and remedy the scratch before flipping out.
Thanks everyone.
Click to expand...
Click to collapse
The Silicone Sleeve sprint sold me for $11 after 25% off (Premier) and Tax lifts it up off any table
Relax. You and everybody else's phone will become dinged up. You are carrying it around with you all day everyday.
You can use the kickstand to keep it off the table or desk and use a case or pouch for carrying.
Use a liquid lens fixer like for glasses.
I cut a little piece from some old cheap screen protectors to cover mine. I'm sure there is some effect on the picture quality, but no current phone is going to compare to a Cannon anyway.
Resisting Lens Scratch
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
Placing a rubber washer between the battery cover and the phone, would not do anything to keep the camera lens from resting on the surface that would scratch it.
kurtwoodfin said:
You can always buy a thick rubber washer and glue it around the camera lens. If you do not want to glue it, you can place it in between the cover and the phone. The solution is not fool proof, but it will work nicely to provide extra cushion and space. This solution is easy and cheap. The washer should not be to tight or small in diameter, so it does not interfere with the camera.
Kurt
Click to expand...
Click to collapse
I was thinking something along the lines of this. Basically you just need a ring that rests around the lens.
Something similar to this comes to mind. Of course, you wouldn't need to have a new lens on it. Just a piece of metal.
This could be magnetic, or glued. You could probably rip the phone apart and replace the piece with a more protruding piece to do the same, but that's far more intrusive.
I'm sure we'll see commercial magnet like solutions for this. I mean, come on. A small magnetic ring is all we need. Someone is going to bank on that.
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Jye75 said:
Or how about using hoverboard technology so the phone never touches anything, and hovers in midair? Geez people, buy a case.
Click to expand...
Click to collapse
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
ViViDboarder said:
Why cover the entire phone with a case when you can just put something around the lens?
I don't like cases. I think these devices were made to look and function in a certain way. If they "needed" a case it should have been built more robust.
I've had an iPhone 3G with no case for 2 years. I've also had no regrets.
Phone nudists unite!
Click to expand...
Click to collapse
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Jye75 said:
It was sarcasm. I too, like mine naked, the way it was born. I have a leather case on my hip to put it in when I'm not using it. Jabbing at the fact that people actually want an accessory to attach to the camera lens ring just to keep it from touching another surface and getting scratched, like there should obviously be a market for that. Anyone that anal about possibly scratching a cellphone camera lens... I'm surprised they EVER pull the phone out to do anything at all. (again, sarcasm)
Click to expand...
Click to collapse
Haha yea. It's a camera on a phone... My DSLR is in it's nice cushy case. My phone will reside, albeit tightly, in my pocket.
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Jye75 said:
I put mine in my pocket up until today, when I got my HTC leather hip case. I got tired of the pocket lint getting in the earpiece grill.
Tip: use Scotch tape and a blunt tipped object to get the lint out of there.
Click to expand...
Click to collapse
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
ViViDboarder said:
I've never used one of those before. I always feel like there's a risk of it falling out. Are they pretty secure?
Click to expand...
Click to collapse
It's nice and snug. There's a hole on the bottom for your fingers to push the phone up to take it out. Magnetic flap, no metal button or anything, so no worries about phantom scratches. Stays close to the hip as well, and doesn't feel oversized or anything. Tight enough on the belt that I don't worry about it falling off.
Cool. I'll definitely check that out then. Thanks.
ViViDboarder said:
Cool. I'll definitely check that out then. Thanks.
Click to expand...
Click to collapse
The one I have is from Sprint online: Part Number CFH2258R
I got a case for mine simply because I've dropped my iPod touch a few times and I'm pretty sure it'd be damaged by now if it didn't have a silicon skin, the EVO's camera worried me as well... The silicon skin Sprint sells seems a lil' bulkier than it has to be tho, and the button bumps aren't as defined as they could be (my iPod touch's skin actually made the buttons easier to press, quite the opposite here). I'm waiting for a different more glossy/smooth skin from Amzer to ship before I decide if I'll just go naked or what...
i found cameraphone lens protector circles at a store called daiso near by me. works great
I don't often post here, and and I don't know if this issue has been addressed before, but but I'd like to tell you about my experience with the note:
I received the phone just today, and after bying it online.. All was good, and I already had a case (a faux-leather flip case), waiting, and and put it in immediately. After playing with it for a few hours, and I noticed that there was a dead spot on the screen. But only when using the s-pen, and a few hasty emails and a phone call to Kogan (off whom I bought the phone), revealed that this was a inhear-of-before phenomenon. As of writing, I've yet to receive word whethery they'll accept a return.
However, that would be rather pointless, and since I have since fixed the issue. It seems that the magnet holding the case flap closed was pretty powerful, powerful enough, in fact, to cause the active digitizer to stop working on that of the phone that the magnet was under. After I removed the case the s-pen worked in the spot, as well as the rest of the screen.
So be warned, test your cases if you can before you buy them, especially if they have a magnetic clasp or similar.
(sorry for the prose)
I have been avoiding magnets because of several posts on the subject. There have also been several stating there are no issues.
I prefer to remain safe, and I am grateful for your advice. Magnets near a device relying on magnetic resonance are probably not a good idea. Better safe than sorry IMO.
Strange how some people have this problem. My note has been sitting in a magnet case for 4 months now with no such problems. I guess it depends on the case and how strong the magnet is but I could not do without my case so I will carry on using it for now.
georgios73 said:
Strange how some people have this problem. My note has been sitting in a magnet case for 4 months now with no such problems. I guess it depends on the case and how strong the magnet is but I could not do without my case so I will carry on using it for now.
Click to expand...
Click to collapse
I think it also depends on where the magnet is. Mine was on the back, directly behind the device.
georgios73 said:
Strange how some people have this problem. My note has been sitting in a magnet case for 4 months now with no such problems. I guess it depends on the case and how strong the magnet is but I could not do without my case so I will carry on using it for now.
Click to expand...
Click to collapse
I agree. More testing, and definitely more information from Samsung, is required.
I wonder if it is the TYPE of magnet, not so much the size.
If it is one of those cheap magnets, maybe it won't bother it
as much as the stronger neodymium magnets?
thanks
thanks man.. for sharing this..
I also have avoided the magnet cases due to this fact and have been trying to find cases that use some other alternate means for closure, like maybe velcro instead. I was also even considering that Sweet Case made out of aluminum, but at ~$70, it is rather pricey. I have just been going case less and totally naked with it and so far no problems.
IIRC there is a comment about magnetic fields in the manual...
similarly too, there is a comment about electrostatic fields, so if you are in an environment where sparks fly off your fingertips at intervals be SURE to discharge yourself before touching your SGN.. you may kill the touch response of the screen..
been there, did that, luckily it was a $50 C/H digital thermostat.
EDIT: 2 April 3:00pm
found it: Page 25 of the GT-N7000 Quick start guide states
"Do not store your device near magnetic fields"; and inclusively states "Do not use carrying cases or accessories with magnetic closures"
Man, I guess I have to quit being a Dark Sith Lord. But I have so much fun using Force Lightning to kill all those annoying Jedi do-gooders
I have a Tridea case with a magnet. The magnet is in the part that locks the cover to the back of the phone.
If I fold that piece behind the phone, there is some influence from the magnet. The influence disappears if I leave some space between the magnet and the back of the phone.
It is only a small problem for me, and only noticeable when I play Draw something or similar apps.
My case:
http://forum.xda-developers.com/showpost.php?p=24121326&postcount=330
Sent from the Note taker with Tapatalk
magnets, how do they work??
I have the same issue, I strapped a powermat charging coil to the inside of my casemate tough case, the result is a dead spot directly above the magnet in terms of the spen.
My dilemma is whether to forgo use of the s-pen for the ease of wireless charging.
For the moment as I rarely use the s-pen, the inductive charging coil is staying in place.
The s-pen works as soon as the powermat coil is removed but I'm not sure if it could do lasting damage?
Sent from my GT-N7000 using xda premium
Mystic38 said:
IIRC there is a comment about magnetic fields in the manual...
Click to expand...
Click to collapse
There's a manual? Who knew!
rhn said:
magnets, how do they work??
Click to expand...
Click to collapse
That, my friend, is one of the great unanswered questions of the universe. Gravity is another one. We know what goes on, but not always how. It is mostly at the atomic level, although you have to look into the quantum level to find out more. One day we may figure it out!
Thanks for the warning! I doesn't use a case with magnets, but it's always good to know if I ever would.
/ Jimmy
Signed up to say thanks OP. I too had this situation where i had dramatic penmark deviation on my note. I use notebook style case w/ magnet
I was considering getting it swapped under warranty but then realised the odd behaviour happened in s-memo but not in canvas/paint app. Now i know its the location of the rear magnet on my case. gj op
Wondering if the Tetrax magnet will hold Nexus 4 at the back?
http://www.tetrax.com/us/
I have this for my Galaxy Nexus, but I had to stick a metal at the back. Because I want to use the wireless charging in the future, I don't think its a great idea to stick the small metal at the back of the phone.
I'm not sure if the Nexus 4 actually have enough (metal/something magnetic) on the back of the inside of the phone to stick on the magnet? Not sure anyone tried this. Because I dropped my Galaxy Nexus and cracked it(in Canada), I'm still waiting to order one!
I'm so use to using this stuff, its really hard to go back to using a car holder.
If anyone know if this one would stick to a magnet, please let me know! Thanks.
I have no familiarity with that product but I just took the strongest magnet off of my fridge (holding up a 1lb whiteboard on there so it's not "industrial" strength but it's not a super weak one either) and I could barely feel the pull between it and my N4. In fact, now that I've done this, I'm concerned that it will be very difficult for them to make the Orb hold this phone at an angle without it sliding off.
Based on this and what I know of that product, I wouldn't expect it to work. That said, I'm not sure how super powerful that magnet is so it's kinda hard to say for sure.
HTH
I think a solution would be to put the metal on a TPU case like the Rearth Ringke Slim and then if you don't want to use the case daily, just leave it magnetized to the Tetrax in your car. That way you just created a dock for yourself in the car to use, a case if you want to use it, and you can even put a NFC tag on the case so that whenever you "dock" it in your car, it activates whatever car mode features you want.
facetubespam said:
I think a solution would be to put the metal on a TPU case like the Rearth Ringke Slim and then if you don't want to use the case daily, just leave it magnetized to the Tetrax in your car. That way you just created a dock for yourself in the car to use, a case if you want to use it, and you can even put a NFC tag on the case so that whenever you "dock" it in your car, it activates whatever car mode features you want.
Click to expand...
Click to collapse
That's what I plan to do when my nexus arrives. I have my GNex set up this way with Incipio Feather case, but I don't leave it on the magnet.
aichemist said:
Wondering if the Tetrax magnet will hold Nexus 4 at the back?
http://www.tetrax.com/us/
I have this for my Galaxy Nexus, but I had to stick a metal at the back. Because I want to use the wireless charging in the future, I don't think its a great idea to stick the small metal at the back of the phone.
I'm not sure if the Nexus 4 actually have enough (metal/something magnetic) on the back of the inside of the phone to stick on the magnet? Not sure anyone tried this. Because I dropped my Galaxy Nexus and cracked it(in Canada), I'm still waiting to order one!
I'm so use to using this stuff, its really hard to go back to using a car holder.
If anyone know if this one would stick to a magnet, please let me know! Thanks.
Click to expand...
Click to collapse
I've tried this with the Nexus 4 and the metal plates some right off of the glass back when you try to mount it on the XWAY. I'm looking for a solution to this. I love the XWAY and used it for quite a while with my SGS2. It was great with that but the Nexus 4's glass back is so smooth anything you stick on it will come off fairly quickly.
I am in the same boat, the stupid metal won't stick at the back. I'm going to contact my friend at 3m to see if they have any other double side tape that would work, I don't want to use something too strong that I can't pull it back out and not break the back glass =(
Why not put a screen protector on the back and then the metal thing on that?
Let's you still see the back, and when you want to remove the metal thing, you won't have to worry about hurting the phone.
aichemist said:
I am in the same boat, the stupid metal won't stick at the back. I'm going to contact my friend at 3m to see if they have any other double side tape that would work, I don't want to use something too strong that I can't pull it back out and not break the back glass =(
Click to expand...
Click to collapse
I'm thinking of getting one of the dBrad Black Carbon skins then sticking the XWAY plate on it. The reviews say it sticks really well to the Nexus 4's glass back.
http://dbrand.com/submodels/nexus-4
Although I might just take some super glue or something to assist the XWAY plate in adhering to the glass.
budbear1 said:
I'm thinking of getting one of the dBrad Black Carbon skins then sticking the XWAY plate on it. The reviews say it sticks really well to the Nexus 4's glass back.
http://dbrand.com/submodels/nexus-4
Although I might just take some super glue or something to assist the XWAY plate in adhering to the glass.
Click to expand...
Click to collapse
FYI - I took some super glue gel and glued the XWAY mount to the back of my Nexus 4, waited a couple hours for the glue to cure and it's working fine now. I figure I can always take a razor blade and scrape it all off sometime if the future since it's glass, after all. I can't say if it will work long term, it's stuck on there good and tight now. Cheers!
The metal plate slips off the back of my N4 too. I contacted Tetrax with no reply. So much for that.
any update for this? it seems that on website Nexus4 is supported:
"Suitable for the LG Google Nexus 4"
http://www.buybits.com/Product/1653...visible-Attraction-Phone-Mount-sku-16535.aspx
i'm wondering if it's a special metal pin with special glue or it's the standard one
pgr1979 said:
any update for this? it seems that on website Nexus4 is supported:
"Suitable for the LG Google Nexus 4"
http://www.buybits.com/Product/1653...visible-Attraction-Phone-Mount-sku-16535.aspx
i'm wondering if it's a special metal pin with special glue or it's the standard one
Click to expand...
Click to collapse
It's the same, just a website lying on its product. It don't works well with nexus 4's back.... The only sollution is glue or phone case...
Err0r-4o4 said:
It's the same, just a website lying on its product. It don't works well with nexus 4's back.... The only sollution is glue or phone case...
Click to expand...
Click to collapse
What about between the phone and case?- or is it too thick....
ddiehl said:
What about between the phone and case?- or is it too thick....
Click to expand...
Click to collapse
After getting it, i can assume that an 1mm sylicone case between magnet and chip on phone wont be stable, not strongh enough.
Btw, even Glue (superglue 3 universale) had some troubles to hold chip on phone (Our nexus is too smart to be glued^^).
Hello all,
I was wondering if its safe to use the phone without a case. I kind of like its design but i am rather afraid that the camera will break because it stands out way too much.
I already have a case,temp glass for screen and camera applied but i have started disliking my cases so far.
My question to you all is, do you really use a cover case to protect the camera or is it safe to take it off?
With cover is the best way, my phone have a scratch on top of the edge just hitting a furniture with a case on it
It's way too slippery to use without a case. I use it without a case a lot and have already dented the corner from a drop.
Sent from my LEX727 using Tapatalk
I like the design and feel of the phone too, but I use a case just to protect the camera. Even with the case that came with the phone, the camera was scratched up because the case is too thin. I now use a different case that's slightly thicker.
Sadly same thoughts, its too much of a risk. I had it one day without a case and its too risky, if only camera didnt stand out that much.
Back to flip case.
I work in construction and never use cases with any of my phones. I just hate the looks and added bulk. I already dropped mine quite a few times, even from head height, still working fine lol. Its just the same as with any other phone. Its neither more nor less slippery, and since its made from metal you wont get breaks in the body, worst case scenario a dent. I dont see this phone having any resell value after few years, and since it cost so little, i prefer enjoying how good it feels in hand and how slim it is rather than making it ugly and fat like oukitel or some other ****ty cheap chinese phone. Last time i used a case it actually made damage instead of protecting the phone. Small particles of dust got inside case and scratched whole backside of my nexus 6p, never again. And whats with the camera lens concerns? it has a small lip, so it should be enough to protect against flat surfaces, and no case gonna protect against other damage, like keys or stuff.
I would not but depends on your use
I somehow have a scratch on my fingerprint sensor. It works fine but...
evan220 said:
I somehow have a scratch on my fingerprint sensor. It works fine but...
Click to expand...
Click to collapse
How does someone even manage that?
jts2111 said:
How does someone even manage that?
Click to expand...
Click to collapse
I'm a mechanic. Might be part of it.