Database Users

ls980 bricked only download mode

hello,
i have an ls980 with d801 firmware, it boots the system but after some seconds it crashes and
reboot again, i can't go into recovery or fastboot, only download mode, but i can't back to stock with
ls980 tot file(even if i use the LGUP_8974.dll),
i can b to stock only with d801.
I tried also to go in developer options (in some seconds before to crash and rebooting) and debug my phone, used ioroot and now
the phone is rooted,
i tried to use adb sideload and push the twrp recovery, for any kind of zip or install apk the answer is error:closed, my device is recognized for some seconds before to reboot,
someone can help me with this issue?

Nobody can help me? I would try to make the recovery img file with ubuntu but i don't know the commands

fixed with this
http://forum.xda-developers.com/showthread.php?t=2633941

Alexandercat said:
fixed with this
http://forum.xda-developers.com/showthread.php?t=2633941
Click to expand...
Click to collapse
If download mode shows, go back to stock with lg flash and .tot firmware file. It will reformat/rebuild all partitions. This is best because you may have a corrupted partition. You can re root after doing this.

abhinav.tella said:
If download mode shows, go back to stock with lg flash and .tot firmware file. It will reformat/rebuild all partitions. This is best because you may have a corrupted partition. You can re root after doing this.
Click to expand...
Click to collapse
in my case didn't work because i had a sprint/tmobile unlocked rom, even if i tried to reflash with the dll and tot file it gave me a d801 cross to ls980 fail..

Alexandercat said:
in my case didn't work because i had a sprint/tmobile unlocked rom, even if i tried to reflash with the dll and tot file it gave me a d801 cross to ls980 fail..
Click to expand...
Click to collapse
No, you have to download seperate dll for ls980 I'll try find the all in one stock rar file for you.

Alexandercat said:
hello,
i have an ls980 with d801 firmware, it boots the system but after some seconds it crashes and
reboot again, i can't go into recovery or fastboot, only download mode, but i can't back to stock with
ls980 tot file(even if i use the LGUP_8974.dll),
i can b to stock only with d801.
I tried also to go in developer options (in some seconds before to crash and rebooting) and debug my phone, used ioroot and now
the phone is rooted,
i tried to use adb sideload and push the twrp recovery, for any kind of zip or install apk the answer is error:closed, my device is recognized for some seconds before to reboot,
someone can help me with this issue?
Click to expand...
Click to collapse
help.. i tap something that i forgot in ... may be in "##4433386368# - Developer menu*" or somewhere(Sprint Dialer Codes) now i can't connect to my computer... i'm not allowed to post ... so ....anyone can help me ?

http://forum.xda-developers.com/showthread.php?t=2656275

look at my link, I can help you
http://forum.xda-developers.com/sprint-g2/help/unbrick-ls980-d801-rom-t2887699

D802 bricked after Lollipop update

Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!

diegz said:
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
Click to expand...
Click to collapse
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?

OverClockeD_GR said:
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
Click to expand...
Click to collapse
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!

diegz said:
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
Click to expand...
Click to collapse
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode

OverClockeD_GR said:
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
Click to expand...
Click to collapse
I can only go to download mode and the adb seems to not recognize the device from there

diegz said:
I can only go to download mode and the adb seems to not recognize the device from there
Click to expand...
Click to collapse
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!

casual_kikoo said:
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
Click to expand...
Click to collapse
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!

diegz said:
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
Click to expand...
Click to collapse
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).

OverClockeD_GR said:
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
Click to expand...
Click to collapse
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!

diegz said:
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
Click to expand...
Click to collapse
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)

casual_kikoo said:
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
Click to expand...
Click to collapse
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p

diegz said:
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
Click to expand...
Click to collapse
My mistake ! Happy for you!

@diegz, what variant of LG G2 do you have? International? I'm planning to flash the 30A 32gb Italy variant on my G2 international. Just want a quick reference before I flash. Sorry for the OT.

@happiness4u i'm on 16gb D802! It's a great update if you ask me

diegz said:
@happiness4u i'm on 16gb D802! It's a great update if you ask me
Click to expand...
Click to collapse
Thanks for the heads up. Gonna try this out in a moment. +1 added.

Help me! How to unbrick my LG G2 D805 with only download mode working

Hey! Can someone help me? My LG G2 is bricked, all i can do is enter into download mode, but i don't know what to do next
I tried using LgMobile Support tool, and it recognized my cell phone, but i couldn't update it because it shows me "you need more than 360mb to update, you can try deleting some files" but i can't delete anything because i can't get into recovery mode
what can i do? Is there any way to delete some files to make space for the update(i think it's impossible, but i don't lose anything asking xD)?
Thank you!

Lg Flash tool
Man, download the KDZ rom file for your phone then use Lg Flash Tool to flash!

CrossDl Error. Plz help me...

Well, I searched for a solution for a long time but I couldn't find one.
I accidentally flashed CloudyG3 2.5 on my LG G2 Korean LG U+ Variant (F320L).
I got HS-USB Diagnostics 9006 on my device manager and I managed to recover it via this thread.
I couldn't use the tool right way cause they didn't have my variant, so I extracted images from F320L TOT and replaced those aboot.img, laf.img, etc.
I got into the download mode and launched LG FlashTool (the TOT FlashTool) and loaded up my TOT and DLL on the tool and attempted to flash.
BUT the error "CrossDL [F400] to [F320L]" was shown in the log.
I think this problem is caused by flashing G3 ROM on my G2, changing the model name in system partition.
I have no idea how to solve this problem.
I tried flashing all kinds of g2 dll, but failed.
I considered flashing the G3 firmware, change the information on the phone, and re-flash g2 firmware, but I think that's gonna make the problem more difficult...
I tried booting into recovery and flash g2 custom firmware, but no recovery mode.
I tried fastboot mode, but phone just says "Security Error" and won't let me get into fastboot mode.
What should I do?

Please ask me if you don't understand exact situation. Sorry for my bad english...

try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033

amin44 said:
try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
Click to expand...
Click to collapse
Thanks. I had a different problem, but fixed it.

Could you write how did you fix it so if someone need it

Need help on lgv20 h990ds to unbrick

I tried to root with dirty Santa steps
But unfortunately
At step16 my cell went to fastboot mode
After that i cant restart in normal mode and download mode
If i do multicolor display is coming
But system recognize the download mode
So I tried to boot stock rom with
Lg flash tool
But it says
Firmware mismatch
Like us996->h990ds
And stop installing in10 persistent
Even lgup detect my download mode
But model unknown error
So pls some help me in it
I checked the file.bat file santa
In 3 batch file it was
There was twp file mention in us996
Instead of
H990ds
So I think the problem starts there
Any way to re flash through
Fast boot
If any one can explain
Say it in step by step pls
Thanks in advance

Some one help guys

To get to a working rooted phone from where you are, enter fastboot mode (hold volume up while connecting to PC iirc), then flash the h990 version of my twrp, (fastboot flash recovery C:\path/to/TWRP/), pull the battery after running fastboot flash twice, then enter recovery by while holding volume down, press power until the screen turns on, then tap power repeatedly until it asks to factory reset, say yes twice, then flash a new kernel and magisk/supersu. Neocore is a popular h990 kernel.
To revert back to full stock, replace your LG up files in Program Files with the modded version from this thread, and use the partition DL mode it adds (select all partitions from your kdz file) to go around the model restrictions

Not working

Cyber_in said:
Not working
Click to expand...
Click to collapse
Hey I I have same problem with u
I try with flashtool in h990.kdz(nouget my stockroom) and massage is download error.
My phone h990ds
But in Lgup readed by unknown model.
Please help me.
Thank you..

Hi I ran into the same issue, but I managed to force flash the firmware by choosing "Erase Chip" option (while choosing the kdz file) in the LGUP tool. Then somewhere in the middle you have to click the pink progress bar to confirm a warning. Hope it's not too late buddy! I registered the xda account just to post this haha. The only issue is that the two IMEIs show up as 0 in the system, but the sim card (data and phone call)works just fine.

nuqudlover said:
Hey I I have same problem with u
I try with flashtool in h990.kdz(nouget my stockroom) and massage is download error.
My phone h990ds
But in Lgup readed by unknown model.
Please help me.
Thank you..
Click to expand...
Click to collapse
Hi see my previous reply. Forgot to reply to your post.

Cyber_in said:
Not working
Click to expand...
Click to collapse
Hi see my previous reply. It worked for me. My V20 H990DS is running well with the latest lineage OS