Database Users

[Q] Soft-brick? ADB sees the phone.

Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.

Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.

Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again

ls980 bricked only download mode

hello,
i have an ls980 with d801 firmware, it boots the system but after some seconds it crashes and
reboot again, i can't go into recovery or fastboot, only download mode, but i can't back to stock with
ls980 tot file(even if i use the LGUP_8974.dll),
i can b to stock only with d801.
I tried also to go in developer options (in some seconds before to crash and rebooting) and debug my phone, used ioroot and now
the phone is rooted,
i tried to use adb sideload and push the twrp recovery, for any kind of zip or install apk the answer is error:closed, my device is recognized for some seconds before to reboot,
someone can help me with this issue?

Nobody can help me? I would try to make the recovery img file with ubuntu but i don't know the commands

fixed with this
http://forum.xda-developers.com/showthread.php?t=2633941

Alexandercat said:
fixed with this
http://forum.xda-developers.com/showthread.php?t=2633941
Click to expand...
Click to collapse
If download mode shows, go back to stock with lg flash and .tot firmware file. It will reformat/rebuild all partitions. This is best because you may have a corrupted partition. You can re root after doing this.

abhinav.tella said:
If download mode shows, go back to stock with lg flash and .tot firmware file. It will reformat/rebuild all partitions. This is best because you may have a corrupted partition. You can re root after doing this.
Click to expand...
Click to collapse
in my case didn't work because i had a sprint/tmobile unlocked rom, even if i tried to reflash with the dll and tot file it gave me a d801 cross to ls980 fail..

Alexandercat said:
in my case didn't work because i had a sprint/tmobile unlocked rom, even if i tried to reflash with the dll and tot file it gave me a d801 cross to ls980 fail..
Click to expand...
Click to collapse
No, you have to download seperate dll for ls980 I'll try find the all in one stock rar file for you.

Alexandercat said:
hello,
i have an ls980 with d801 firmware, it boots the system but after some seconds it crashes and
reboot again, i can't go into recovery or fastboot, only download mode, but i can't back to stock with
ls980 tot file(even if i use the LGUP_8974.dll),
i can b to stock only with d801.
I tried also to go in developer options (in some seconds before to crash and rebooting) and debug my phone, used ioroot and now
the phone is rooted,
i tried to use adb sideload and push the twrp recovery, for any kind of zip or install apk the answer is error:closed, my device is recognized for some seconds before to reboot,
someone can help me with this issue?
Click to expand...
Click to collapse
help.. i tap something that i forgot in ... may be in "##4433386368# - Developer menu*" or somewhere(Sprint Dialer Codes) now i can't connect to my computer... i'm not allowed to post ... so ....anyone can help me ?

http://forum.xda-developers.com/showthread.php?t=2656275

look at my link, I can help you
http://forum.xda-developers.com/sprint-g2/help/unbrick-ls980-d801-rom-t2887699

[BRICK] D802 fota partition fail. TOT doesn't work

Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?

collller said:
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
Click to expand...
Click to collapse
First double check that you can enter recovery. Hold the power button until the phone completely shuts down. Wait 5 seconds. Then hold power + volume down until it vibrates and LG logo shows up. Release both buttons. Then press them again quickly and hold them. You will enter recovery. Or the phone my offer to do a factory reset which btw won't happen since it will go to recovery by pressing the power button 2 more times. If you have TWRP then you are good. Install ADB on your PC and the LG drivers. When you have ADB, Download (check everything) related to JB and KK. Reboot the PC. Connect your phone with the cable. The PC will not recognize the phone. You have to use a little trick in the device manager first:
Press the windows key + pause/break and click on device manager. Right click on the faulty device with the yellow exclamation mark and hit properties then update driver. Click on the second option then from the list search for ADB or ADB device or something along those lines. Select the LG driver and hit OK. Unplug the phone. The phone must be in recovery still. Inside recovery hit advanced and look for ADB sideload. Check both checkboxes on what to wipe. If you don't already have a rom you want to flash, then use this one. It is a very stable and fast one and I only recommend it because I had the same issue as you and it worked for me. Download that rom and rename the zip file to rom.zip and copy it to the location where your adb.exe file is. You will also need the KK baseband modem otherwise auto rotation won't work. Search for it on the D802 dev thread. Now on your PC, open a command prompt inside the directory you copied the rom.zip (shift + right click) and hit "open command prompt here". Type in:
adb devices (this will ensure that your connection with the phone is alive. If you see some weird string then it works. That is the name of the phone btw)
adb sideload rom.zip
Click to expand...
Click to collapse
Installation will now begin. You are saved.
Of course all the above only applies if you have acces to recovery. But I wonder how could you screw that one up. It's literally a simple apk installation and a 1 button solves everything app. If you don't have recovery you can still try to save your phone with download mode. Here is a link that maybe helps but I havent tested it
And one last thing: Don't use Flashtool.

thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder

collller said:
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
Click to expand...
Click to collapse
I have the same problem as you, my PC don't recognize the phone.

try resetting it with combo keys

Guys plz help
D802 flashed with wrong laf.img now i have this error in lg flash tool.

Same problem here only download mode is working and it gives error when I am trying to install tot LAF retrieveGPT() Failed. is there any solution for it?

if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.

raptorddd said:
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
Click to expand...
Click to collapse
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?

devil ££ sama said:
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
Click to expand...
Click to collapse
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476

raptorddd said:
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )

devil ££ sama said:
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
Click to expand...
Click to collapse
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.

raptorddd said:
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
Click to expand...
Click to collapse
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )

devil ££ sama said:
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
Click to expand...
Click to collapse
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567

raptorddd said:
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
Click to expand...
Click to collapse
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected

devil ££ sama said:
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
Click to expand...
Click to collapse
post your question here explan in detail all you did and where are you now , i hope you get help here.. then when fix post back with the fix.
http://forum.xda-developers.com/showthread.php?t=2432476

huzaifaas said:
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Click to expand...
Click to collapse
Have the same issue on D802 G2 here. How'd you solve it?

No download mode, no OS, YES Recovery mode

Unclear of phone history.
Phone model: D803 Canadian
Current issue:
Can NOT go to download mode.
CAN go to TWRP mode ver 2.8.4.0 installed by pressing VOL + and VOL - and Power button, all 3!. Shows some chineese characters first before going into TWRP.
I am NOT able to flash custom roms (tried cm12-d803, aicp-kk-d803) I get assert failed: run_program("/system/bin/loki.s h") == 0
I have tried the instructions here http://forum.xda-developers.com/showthread.php?t=2620733 [[SOLUTION] LG G2 VS98012b Problems With Loki (loki.sh) + [ROM][UNOFFICIAL]CM10.2], but no go..
How can I fix this?

Hello.. BUMp! I have access to ADB in TWRP mode..

SaHiLzZ said:
Hello.. BUMp! I have access to ADB in TWRP mode..
Click to expand...
Click to collapse
Did you tryed to cleanflash? Btw why is your download mode missing
It shows chinese characters before going to twrp. I don't get it why it is like that
Does it show the chinese characters and then boots into twrp? If so maybe try to flash also later 2.8.4.0 recovery from blastagator.
Try to google the right rom for the D803 Canadian version cause I've read that some D803 models need to flash roms from another model instead.

wulsic said:
Did you tryed to cleanflash? Btw why is your download mode missing
It shows chinese characters before going to twrp. I don't get it why it is like that
Does it show the chinese characters and then boots into twrp? If so maybe try to flash also later 2.8.4.0 recovery from blastagator.
Try to google the right rom for the D803 Canadian version cause I've read that some D803 models need to flash roms from another model instead.
Click to expand...
Click to collapse
I have tried couple of D803 roms, CM12, AICP KK.. they fail with the assert error for loki.
How to fix this. I am on 2.8.4.0 TWRP version.

SaHiLzZ said:
I have tried couple of D803 roms, CM12, AICP KK.. they fail with the assert error for loki.
How to fix this. I am on 2.8.4.0 TWRP version.
Click to expand...
Click to collapse
Well maybe outdated loki or yeah I can't tell you the truth exactly, Ehhm... Maybe you have to flash the bootloader files again? Try to find bootloader files for your phone in a flashable zip. Maybe that works
First try to find alternative things before what I said about the bootloader, cause flashing the wrong things can harm it.

wulsic said:
Well maybe outdated loki or yeah I can't tell you the truth exactly, Ehhm... Maybe you have to flash the bootloader files again? Try to find bootloader files for your phone in a flashable zip. Maybe that works
First try to find alternative things before what I said about the bootloader, cause flashing the wrong things can harm it.
Click to expand...
Click to collapse
FIXED!
I borked it further by trying to install older recovery using dd command while in TWRP. Ended up with secure boot error ONLY when I try to press all three buttons, and then I get QDLOAD_BULK in device manager. Device continues to boot normally if I press the power button.
Tried to use http://forum.xda-developers.com/showthread.php?t=2582142 [FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2, but wouldn't work in Ubuntu. Drives kept disappearing after showing up momentarily. NOT the case in Windows. So used http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627 Windows application, and selected D802, it failed on a few items, but gave me download mode and Security Error on normal boot.
Used LG Flash tool KDZ flasher to flash v20 Rogers, but failed at 40%. Tried again, still failed.
Used LG TOT Flash tool, and was successful!

@SaHiLzZ Nice that you fixed your problem on your own:good: Have fun further with it:laugh:

D802 bricked after Lollipop update

Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!

diegz said:
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
Click to expand...
Click to collapse
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?

OverClockeD_GR said:
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
Click to expand...
Click to collapse
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!

diegz said:
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
Click to expand...
Click to collapse
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode

OverClockeD_GR said:
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
Click to expand...
Click to collapse
I can only go to download mode and the adb seems to not recognize the device from there

diegz said:
I can only go to download mode and the adb seems to not recognize the device from there
Click to expand...
Click to collapse
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!

casual_kikoo said:
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
Click to expand...
Click to collapse
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!

diegz said:
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
Click to expand...
Click to collapse
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).

OverClockeD_GR said:
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
Click to expand...
Click to collapse
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!

diegz said:
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
Click to expand...
Click to collapse
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)

casual_kikoo said:
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
Click to expand...
Click to collapse
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p

diegz said:
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
Click to expand...
Click to collapse
My mistake ! Happy for you!

@diegz, what variant of LG G2 do you have? International? I'm planning to flash the 30A 32gb Italy variant on my G2 international. Just want a quick reference before I flash. Sorry for the OT.

@happiness4u i'm on 16gb D802! It's a great update if you ask me

diegz said:
@happiness4u i'm on 16gb D802! It's a great update if you ask me
Click to expand...
Click to collapse
Thanks for the heads up. Gonna try this out in a moment. +1 added.