Verizon Note 4, non rooted running stock 5.0.1
Ever since I got my phone (used) I've been having issues with WiFi. At first it started after I use HotSpot couple of times, after I turn it off WiFi seems to be on but either doesn't see any networks, or connects to my router(s) and get's no Internet. Reboot always solves it.
At the same time I usually start having Bluetooth issues (won't connect). Again reboot helps.
Then it started to happen every 2-3 days even when I'm not using HotSpot feature.
Once every blue moon, phone will get stuck in Wireless Charging mode (I have Samsung inductive cover and charger). It will say "now charging wirelessly" when when my phone is miles away from charging base
Again reboot was only remedy.
I did a factory restore and it didn't help a bit.
Lately I started to have USB issues. When I connect Note 4 to my computer via USB cable, it's not detected and phone is not even charging! I thought it was my USB hub (which btw has high current 2.1 A ports) or ports, but after I rebooted phone USB started to work.
Any clues what might be happening? Could it be hardware issue
Hello, I've had the V20 for a number of months now and love the phone, but I never tested out a data connection before, only to find out that when I use both the LG cable and a Anker USB3.0 cable, my phone is not able to connect to any computer. The system prompt to select the MTP or PTP connection appears, but after making a selection and the computer seeing the phone for a split second, the connection is lost and the USB prompt appears rapidly over and over again. I even went into developer options and set MTP connection always.
I tried a reboot, battery pull and capacitor discharge, and a full system restore. No fix. The only work around I have now is a samba server or moving files with the SD card manually.
Please, if you have any ideas? Does not work in Windows and Linux.
Thank you.
Have you installed LG bridge?
Sent from my LG-H990 using Tapatalk
dbo989 said:
Hello, I've had the V20 for a number of months now and love the phone, but I never tested out a data connection before, only to find out that when I use both the LG cable and a Anker USB3.0 cable, my phone is not able to connect to any computer. The system prompt to select the MTP or PTP connection appears, but after making a selection and the computer seeing the phone for a split second, the connection is lost and the USB prompt appears rapidly over and over again. I even went into developer options and set MTP connection always.
I tried a reboot, battery pull and capacitor discharge, and a full system restore. No fix. The only work around I have now is a samba server or moving files with the SD card manually.
Please, if you have any ideas? Does not work in Windows and Linux.
Thank you.
Click to expand...
Click to collapse
Did you enable USB debugging in Developer options? If no, enable it.
Change the power settings in windows for the USB.
Power options
Advanced settings
Disable "USB selective suspend setting"
Tried all the above
Pierre118 said:
Did you enable USB debugging in Developer options? If no, enable it.
Click to expand...
Click to collapse
Yes, USB debugging works and I'm able to use ADB with my phone and both the Windows laptop and Linux Desktop. However, neither is able to reliably connect through the typical MTP and PTP methods. I finally got MTP to limitedly work with MTP when I use the LG supplied cable and ignore the USB connection prompt in Windows and Linux. I go straight to File Explorer and access the file directory of the phone. Every time I open a folder or access a file though, the phone rapidly pops up the USB connection message over and over while the file moves.
All third party cables and USB devices are not working other than just charging. In Linux, the error message in my logs is:
usbfs: process 20678 (mtp.so) did not claim interface 0 before use
reset high-speed USB device number 101 using xhci_hcd
dbo989 said:
Yes, USB debugging works and I'm able to use ADB with my phone and both the Windows laptop and Linux Desktop. However, neither is able to reliably connect through the typical MTP and PTP methods. I finally got MTP to limitedly work with MTP when I use the LG supplied cable and ignore the USB connection prompt in Windows and Linux. I go straight to File Explorer and access the file directory of the phone. Every time I open a folder or access a file though, the phone rapidly pops up the USB connection message over and over while the file moves.
All third party cables and USB devices are not working other than just charging. In Linux, the error message in my logs is:
usbfs: process 20678 (mtp.so) did not claim interface 0 before use
reset high-speed USB device number 101 using xhci_hcd
Click to expand...
Click to collapse
Is this behaviour on accessing and copying? You can not copy a file from your Windows laptop to the phone?
Yes, I cannot open folder directories, nor move files from phone to computer or visa versa.
Also. Try to not let the phone screen turn off. Change display time to 15 minutes or something.. Change back when finished. GL
kaluna00 said:
Also. Try to not let the phone screen turn off. Change display time to 15 minutes or something.. Change back when finished. GL
Click to expand...
Click to collapse
No change.
dbo989, did you resolve this issue? By any chance are you running avast mobile security? I was able to transfer files both ways via USB and had the pull down USB options without ever having to add USB debugging. Then I installed AVAST and USB has become charge only... none of the widely recommended solutions above will unlock USB. I see no apparent settings in AVAST so I will call them. If no resolution then I will trash Avast
bcapollo said:
dbo989, did you resolve this issue? By any chance are you running avast mobile security? I was able to transfer files both ways via USB and had the pull down USB options without ever having to add USB debugging. Then I installed AVAST and USB has become charge only... none of the widely recommended solutions above will unlock USB. I see no apparent settings in AVAST so I will call them. If no resolution then I will trash Avast
Click to expand...
Click to collapse
No, I never could resolve it. I ended up using Samba to fileshare with home computer, but lost any OTG cable ability. Never used antivirus or security software with my phone.
dbo989 said:
No, I never could resolve it. I ended up using Samba to fileshare with home computer, but lost any OTG cable ability. Never used antivirus or security software with my phone.
Click to expand...
Click to collapse
Just fixed it... turned out to be the port on my PC, I switched ports and its back as it was, no need to enable dev mode or USB debug... its still slow connection... I have to look up Samba solution, never used it.
Thanks for sharing
I just experienced the same problem with the USB connection constantly cycling between being plugged in and not. Windows kept alternating between the device connected and disconnected system sounds. I unplugged the USB 3.0 to USB-C cable on both ends, unkinked and straightened it, and plugged the cable back into the PC and the phone. Hasn't made another peep for the last half hour and the phone is staying in USB file transfer mode. I wiggled the cable at the phone end and still no further disconnections. Maybe I didn't connect the cable securely at the PC end the first time.
This is the first time this has happened since I started setting up the phone this week, so I don't know what to make of it. Regardless, I need to order some more USB-A to USB-C cables since this is my only one.
USB File Transfer Issue - Resolved
Hi, I had the exact same issue with the computer not seeing the phone as far as files. I was still able to use ADB, Fastboot, etc, so I figure it was not a hardware problem. Tried two different computers as well. Every time I selected "File Transfer" in the USB settings, the phone would beep, and when connected to the computer, the computer made the usual chime. The phone would not show up in explorer still.
Previously this phone had been rooted, but I wanted to bring it back to stock. I had flashed the latest KDZ file. Then using ADB and Fastboot locked the bootloader. It seems that the USB issue happened after that. Here is what finally fixed it:
Turned on developer options the usual way (tapping build number in software info) and then turned off "Allow OEM Unlock." Then I turned off developer options. Still, no luck, so I then re-flashed the latest KDZ (H91820h) again, but this time with the bootloader locked.
After everything was done, I set the phone up again, and now file transfer works perfectly.
I did not want to chance locking the bootloader while the phone was still rooted. I learned the hard way about that, and nearly bricked the phone once before. Luckily I still had factory upload saved in the LAF partition.
Hope this helps someone out there.
Turns out it was not fixed permanently
lighttech said:
Hi, I had the exact same issue with the computer not seeing the phone as far as files. I was still able to use ADB, Fastboot, etc, so I figure it was not a hardware problem. Tried two different computers as well. Every time I selected "File Transfer" in the USB settings, the phone would beep, and when connected to the computer, the computer made the usual chime. The phone would not show up in explorer still.
Previously this phone had been rooted, but I wanted to bring it back to stock. I had flashed the latest KDZ file. Then using ADB and Fastboot locked the bootloader. It seems that the USB issue happened after that. Here is what finally fixed it:
Turned on developer options the usual way (tapping build number in software info) and then turned off "Allow OEM Unlock." Then I turned off developer options. Still, no luck, so I then re-flashed the latest KDZ (H91820h) again, but this time with the bootloader locked.
After everything was done, I set the phone up again, and now file transfer works perfectly.
I did not want to chance locking the bootloader while the phone was still rooted. I learned the hard way about that, and nearly bricked the phone once before. Luckily I still had factory upload saved in the LAF partition.
Hope this helps someone out there.
Click to expand...
Click to collapse
After thinking it was in fact fixed, I rebooted the phone several times, turned off, then on, and all seemed well. Until the next morning. I turned it on, and the same issue happened again. No File Transfer mode to computer. ADB still worked. After being on for a while and getting warm, all of a sudden file transfer started working again. Rebooted, and turned on and off, and it continued to work. I figure its a bad part with a thermal issue somewhere so I put it in the freezer for 5 minutes. When booted up again, the same problem occurred until the phone warmed up. Weird? So I tried something completely different. I downgraded the phone to H91810p and tested again. It seemed to work fine. I put it in the freezer again, and the problem will not show itself. For whatever strange reason the problem appears to be heat related, and ONLY happens with the latest KDZ, Oreo 8.0 The only thing that I can theorize is that the SOC is bad, or there is a bad area of flash memory that is intermittent.
Does anyone have any clues? I am going to put it back in the freezer, go to work, and test again when I get home to confirm.
Craig
Hi all,
I am having trouble connecting my phone to the PC through USB. When I plug it in the PC doesn't do anything, no notifications or pop ups that a device has been connected. The phone itself just goes into charging mode, again with no sign of a USB connection. When I drag down the menu bar it just says charging with no options such as USB connection mode as you would expect. I have tried two different cables and a different PC and it's the same, nothing on the PC to indicate a connection and the phone just entering charging mode. A different Samsung phone (Galaxy S5) connects immediately with the same cable on the same PC, giving the notification and connection option on the phone. I have tried a hard reset/factory reset of the phone but have had no luck. The phone still fast charges as normal using the standard factory charger, so the port on the phone doesn't seem to have any issues that way, but I just can't get the USB to connect.
I bought the phone second hand just over a year ago, when I got it Knox had been triggered and it didn't work with my GearVR due to a software problem (it seems the previous owner was likely a tinkerer who installed a custom ROM). At this time I plugged the phone in and manually re-installed the Stock Samsung Software using Odin to reset the phone to default. Since this time I have used the phone with no issues, everything has run fine. I only realised when I used a friends S7 Edge that my software was out of date, it seems OTA updates don't work on this phone and it still has the software I installed. This led me to try plugging it in again and updating manually and I have only now found this issue with the USB. Do you think this is a hardware problem or possibly software? Any suggestions would be much appreciated.
Thanks,
I just bought a refurb from ebay the verizon version and am trying to flash the stock rom to it, i have installed 2 different driver packages, restarted my pc, installed smart switch and enabled usb debugging
I installed smart switch onto another pc and it still wont connect
I will try resetting the phone, it only charges when connected, cant transfer data
Changed cords?
I had eBay special cords and they would not allow a connection with the PC, only charging
Different brand and works fine
Sent from Samsung S7 Edge [Oreo]
They are regular cords as i used it to connect my other phone right after