Related
I've been experience that my battery life has improved ALOT when I charge it while it's on, also when I watch a movie or two and then charge it at the same time, when it reaches 100% I easly get more days out of it.
What's your experience?
This makes sense because the Wall charger has plenty of power to quickly charge the unit, while a USB connection is standard at 5 volts.
So the slower the charge, the longer it takes, the better it hold the charge longer.
In your situtation, you are watching movies while charging... which eats most of the power as it comes in, and supplies the battery with a slower charge; thus increasing the battery life until it drains again.
I do this with my Motorola cheap-o phone. If I power it via USB it'll last like 7 days... but if I charge it via a Wall Charger it'll be dead in 2.
Never really gave that any thought. You think the slower cycles going in, then the harder it is to go out? I'll keep mine playing movies while I'm sleeping then to get a better charge if that's true!
I thought that was very bad for the Batery, actually my laptop's batery is already dead (it drains full batery in less than 3 minutes) and I was using your method during all its live, around 1.5 years.
I noticed that if you use the Diamond during charge it warms up very much, compared to when not using it.
I must say that I noticed that some of the cicles where longer than others with similar or less use, I will test in the nexts days and post back.
player911 said:
This makes sense because the Wall charger has plenty of power to quickly charge the unit, while a USB connection is standard at 5 volts.
So the slower the charge, the longer it takes, the better it hold the charge longer.
In your situtation, you are watching movies while charging... which eats most of the power as it comes in, and supplies the battery with a slower charge; thus increasing the battery life until it drains again.
I do this with my Motorola cheap-o phone. If I power it via USB it'll last like 7 days... but if I charge it via a Wall Charger it'll be dead in 2.
Click to expand...
Click to collapse
ALL Devices like phones charge at a nominal 5v. It's the current that is different.
Wen you charge while the the phone is some way in use it works the battery to max efficiency and this results in a more efficient charge pattern.
Charge your phone whenever you can, never turn it off when charging and top up as often as possible. That will maximise battery life and max the potential capacity.
Don't discharge too low either.
Hello there developers,not sure if I'm posting on the right place but I have a really big problem. My new Pogo Cable arrived and I was so excited to use it,but my happiness didn't lasted fort too long. The problem is that the Tablet while charging with the Pogo cable is either charging slow ,or neither at all. This issue is available for both Lollipop and Kit-Kat,have upgraded an then downgraded with the hope that the issue will be solved. The original Micro -Usb cable works good but with the Pogo Cable in the Battery Monitor Widget it appears "Discharging" and "AC Plugged",and the charging rate is booring slow. Had the idea to measure the Voltage and the current Flow with a multimeter and got the surprise that while the voltage is 5.12 V the amperage is 0.12 A ,while the original charger pumps up to 2 Amps. Could this be the issue? Is there some electrical switch that should open and release all those 2 Amps or is this Cable a Hoax or something that is not fully functional? Thanks in advance,hope that you guys will enlight me somehow!
I've no idea if this is related but be aware that having your pogo plug connected while also having anything connected to the microUSB will stop charging. The charging icon (lightning bolt) will still appear but that I'd a false indicator. This limitation is due to the Android kernel and is present in all versions of Android.
I exclusively use a pogo plug to charge my Nexus 10 and it has always worked on all versions of Android including 5.0.2 which I'm on today. For me pogo plug charging has always been about 25 percent faster then USB charging.
Sent from my Nexus 10 using XDA Premium HD app
My experience is exactly the same as 3DSammy reports.
well my warranty is expired so i Decided to "surgically" dissmantle my Nexus 10 in a heroic attempt to find the cause and I have made a breakthrough (or at least I tought so). I got another Pogo cable ,and this one was good,the voltage was exactly 5 Volts measured and the Amperage that I got was 2.21 Amps measured with a 6 Ohm fuse,all these values where from the original Samsung charger. All things good,but the Tablet is still not charging at all,the same Lightning animations and even after 3~4 hours still no charge at all,and this is Lame in my opinion. So after opening the tablet,I got the idea to short the 3 and 4 pogo pins together,and assumed that this will draw all the power that the battery needs to charge,the idea was working i got 20% more power draw than the usb cable BUT for only let's say Half of hour ,and then the same old story,battery was discharging but the lightning animation was on. This is not so good and my suppose is that the Power Management iC from the motherboard is some how not managing the Pogo charge at all :laugh: so my next idea is to wire the charging Pogo pins directly to the battery and hope for the best. Regards! :good:
moky900 said:
well my warranty is expired so i Decided to "surgically" dissmantle my Nexus 10 in a heroic attempt to find the cause and I have made a breakthrough (or at least I tought so). I got another Pogo cable ,and this one was good,the voltage was exactly 5 Volts measured and the Amperage that I got was 2.21 Amps measured with a 6 Ohm fuse,all these values where from the original Samsung charger. All things good,but the Tablet is still not charging at all,the same Lightning animations and even after 3~4 hours still no charge at all,and this is Lame in my opinion
Click to expand...
Click to collapse
I've got one of the original n10 from first day of issue. My battery is going to hell after being used and charged every day for the past couple years. It's been on/run everyday since Dec. 2012. I have always had a problem charging while using it. My display is always set at about 1/3 bright. When my battery drops to critical, I plug in the pogo and usually put it in sleep mode to charge. It will quick charge that way.
If I still need to use it at critical battery level, plugged into the pogo plug, it maintains power and possibly gives it a very slow increase in charge. Almost none noticeable, but will maintain power level (unless tons of graphic, camera or movies along with full bright screen).
I've just taken it for granted that this is how it works. Pogo plug will maintain battery while using and will switch to quick charge once put into sleep mode or powered off. It's always acted that way, so I have never known anything different.
Ed
metaled222 said:
I've got one of the original n10 from first day of issue. My battery is going to hell after being used and charged every day for the past couple years. It's been on/run everyday since Dec. 2012. I have always had a problem charging while using it. My display is always set at about 1/3 bright. When my battery drops to critical, I plug in the pogo and usually put it in sleep mode to charge. It will quick charge that way.
If I still need to use it at critical battery level, plugged into the pogo plug, it maintains power and possibly gives it a very slow increase in charge. Almost none noticeable, but will maintain power level (unless tons of graphic, camera or movies along with full bright screen).
I've just taken it for granted that this is how it works. Pogo plug will maintain battery while using and will switch to quick charge once put into sleep mode or powered off. It's always acted that way, so I have never known anything different.
Ed
Click to expand...
Click to collapse
Well I'm sure about what did you said,but in my opinion this is a marketing bulls$h*t. Why would I use that Pogo cable if it's role is to charge only on sleep mode and powered off?I ordered because I thought that like the instructions of the pogo says:" it will charge the battery even when you are using it for movies and browsing,being more handy ,because you have the micro USB port free." I play games ,I surf the web,so my tablet is hooked up to a USB hub so I have connected a mouse,a keyboard and a game controller,so my USB port is full,and I hoped the pogo will help. Charging only on sleep is equal to zero for me,I need live charging,in the same time as the tablet runs games and other stuff. In my opinion this "glitch" should have been told on the pogo site,so I could full understand this cable and it's role. Shame on Samsung,30$ .for nothing! Thanks for the help!
I have a 6 foot cable from monoprice that I like to use. I noticed something odd... it works fine with fast charging (reports it in the notifications and chargers in an hour or so). However, when I turn off fast charging, it charges extremely slow. It estimates around 6 hours to charge from empty, but only gets to around 70% after 8 hours.
On the other hand, with the stock cable, I think it reported around 4 hours or less to charge (without fast charge), and was at 100% by the time I woke up. I've done this test several times, same room and signal quality, etc. Even switching the cables back and forth show the different estimated charge time.
Why is this? I mean the exact cable can fast charge just fine... and I like to slow charge overnight to avoid battery heat.
I did try shorter 3rd party cables and am having the same effect, which is quite annoying. Again, same charger, fast charge works, slow charge barely works.
johnnyz86 said:
I have a 6 foot cable from monoprice that I like to use. I noticed something odd... it works fine with fast charging (reports it in the notifications and chargers in an hour or so). However, when I turn off fast charging, it charges extremely slow. It estimates around 6 hours to charge from empty, but only gets to around 70% after 8 hours.
On the other hand, with the stock cable, I think it reported around 4 hours or less to charge (without fast charge), and was at 100% by the time I woke up. I've done this test several times, same room and signal quality, etc. Even switching the cables back and forth show the different estimated charge time.
Why is this? I mean the exact cable can fast charge just fine... and I like to slow charge overnight to avoid battery heat.
I did try shorter 3rd party cables and am having the same effect, which is quite annoying. Again, same charger, fast charge works, slow charge barely works.
Click to expand...
Click to collapse
I've noticed the same thing with my 10ft cable from Monoprice. It charges fine on fast charge but slow on regular charging. I also noticed that this cable charged slowly on my previous phone, an LG G3. I think it has to do with the resistance of the cable due to different gauge wire and wire length. The regular charge is affected by this more than the fast charge, since the fast charge is pushing more amperage anyway. At least, that is my theory on what is going on.
I have noticed this as well with a 10 foot monoprice cable.
About two weeks ago I purchased a 10 foot Anker Cable and it doesn't have this issue. Overall I think the Anker cable and it's connections feel like they are better quality than the monoprice or the stock cable.
i have had the V20 for about 12 hours in which time it charged from about 50% to about 75% ... my Note would accomplish the same in about 15 minutes ... and yet the V20 is supposed to run the same type of quick charger on the same size battery ... something about this doesn't rub me the right way
yes i did use the phone and unplug it a few times etc but it still should have been much faster ...
it was connected using its own cable and charger BUT through a USB extension cord ... so then i thought maybe that's the problem - maybe i need a longer type C cable and to get rid of extension cord ... but i need to have an answer to that BEFORE buying new cables ...
so i plugged it in directly ( no extension ) and tried to see if it charges in correct mode ...
and here is where i face plant into a wall of excruciating stupidity ... every single app out there measures charging current, whereas what i really want to know is whether the charger is running at 5V standard voltage or using the quick charge 9V voltage ... amazingly there doesn't seem to be an app to show this - or is there ?
my galaxy note would simply say " adaptive quick charger connected " when plugged into quick charger but the V20 doesn't say anything like that.
accubattery app says my screen on charging rate is 760 ma and screen off is 1760 ma ... and the charger of course states 1.8 A so that's consistent ... but is that at 5V or at 9V ? the charger supports both - which one is it ?
this is killing me - so much stupidity. it shouldn't be that hard to figure out whether the phone is charging correctly or not.
anybody have an idea how i could find out whether the charger is actually stepping up to 9V without physically cutting the USB cable and using my multimeter ?
EDIT: i realized i have a kill-a-watt ( actually two of them ) and i can measure power draw from 120V outlet ... so i did that. the draw fluctuated from about 6 to 13 watt. now if we assume 90% efficiency on the charger then full power would have to draw 18 watt from outlet - clearly it never got close. on the other hand at 5V it should have maxed out at around 10 watt power draw, and it went quite a bit over that so it would seem to be using the 9V mode ...
at this point however i'm up to 90% battery and can't expect it to charge at full rate any more as some battery charging algorithms taper off above 80% or so ...
i tried with and without extension cord and noticed no difference ... also if i remember correctly my Note also charged fine over this same extension cord ... but i'm not sure
EDIT: played with turning off 2nd screen as well as shutting down device completely - this phone is crazy. power draw is all the place - at one point it went to ZERO and stayed there until i unplugged it and plugged it back in, then it would fluctuate between zero and 14 watts ...
you know back in the day i had LG Nitro HD and it had worst battery performance of any phone ever ... and this V20 seems to be living up to that legacy. WTF.
anyway, it seems the charger and the cable and extension are not to blame - it seems there is some kind of software weirdness that is resulting in very sporadic power draw ...
slow charging is one of the reasons i switched from iPhone back to Android - i expected this V20 to perform similarly ( blazing fast charging ) to the Note 4 i had before the iPhone 6S Plus ... but it's charging performance so far is almost identical to the iPhone - slow as a snail.
i already spent $80 on case and screen protector and i'm supposed to spend a bunch more on extra cables and memory card as well as sell my iPhone and at the same time i'm thinking - maybe i should just return it ? going to have to observe it for a while longer before making any decisions either way ... terrible.
The V20 is QC 3.0
The Note 5 is QC 2.0
The V20 will negotiate with a 3.0 charger to tell the charger what power it requires at that moment so power will fluctuate during charging.
this will show you which devices are 3.0 and 2.0
https://www.qualcomm.com/documents/quick-charge-device-list
Quick charging explained
http://www.androidauthority.com/quick-charge-3-0-explained-643053/
nest75068 said:
The V20 is QC 3.0
The Note 5 is QC 2.0
The V20 will negotiate with a 3.0 charger to tell the charger what power it requires at that moment so power will fluctuate during charging.
this will show you which devices are 3.0 and 2.0
https://www.qualcomm.com/documents/quick-charge-device-list
Quick charging explained
http://www.androidauthority.com/quick-charge-3-0-explained-643053/
Click to expand...
Click to collapse
yeah it fluctuates a lot. i gave up on apps and just using Kill-a-watt now which is a physical power meter you insert into 120V outlet. it shows power draw from charger, not output, but we can assume about 90% efficiency from input to output of charger.
i let the V20 drain to 40% overnight and restarted the test today. with the extension cord it went up to 16 watt draw from outlet and stayed there - charge quickly went up to 55% then i tried without the extension cord and now its only at 11 watts. this is with both screens off. so far my conclusion is that using an extension cord makes no difference but the level of charge on the phone does impact the charging speed. you need to drain the phone to measure full charging speed.
i will continue with my testing but i am somewhat relieved. 16 watts is close to spec, in fact the spec is 16 watt but on the OUTPUT side of charger, not input, so i'm withing about 10% of spec.
i'm also a lot less nervous buying charging cables now that i verified 16 watt charging over many years old USB 2.0 extension cord ...
EDIT: wow it went from 55% to 68% while i was typing this message ! this is very different from what i saw yesterday ... it was running at 11 watts while i was typing. looks like the phone charges fast as long as it is: 1) drained and 2) left alone. if the phone is almost full and you keep playing with it the level of charge barely changes.
EDIT: at 89% charge it's now down to just 4 watts power draw from outlet ... 25% of what it was pulling at 40% charge. so far it looks like it tapers charging speed off gradually with charge level - starts early and tapers it off to almost nothing as it nears full charge ... and all the while it fluctuates with processor and screen use and probably other factors such as temperature. maybe the reason it went to 16 watts when i plugged it in the morning is that the phone was cold from not being used all night and perhaps it now warmed up so the power got tapered.
maybe i'll stop testing it - it seems to be working correctly, just not the way i originally expected it to.
overall i'm disappointed with this phone but the only phone i would trade it for is Pixel XL 128 GB Very Black which is unavailable ... so i guess i will keep it.
the phone i'm most impressed with right now is ZTE Axon 7 i got for my mother - it is shockingly good - if it wasn't for FM radio, IR Blaster, Removable Battery, Laser Autofocus, Dual Camera, Dual Screen and Nougat i would even say the ZTE Axon 7 is BETTER than V20. the main problem with ZTE is it's just not expensive enough for my ego - otherwise it is great. the screen is is super sharp, vivid and punchy, the front facing speakers are loud and crisp and then there's the 2 year warranty. i'm jealous ...
but i will stick with V20 to protect my dignity. because let's face it - if i'm out on a date i want to have the latest, most technologically advanced and most expensive phone - not the cheapest phone, even if it is just as good or better. really happy with my decision to get Axon 7 for my mom though. she loves it as well.
The way QC works is that it will charge fastest from low power until around 70-80% and then slow down A LOT to help preserve the battery. That is why you saw a high wattage and then when you got into the 80's you saw a very low wattage.
QC is mainly for you to get 40-50% of battery power in a relative short amount of time when your battery is low.
I bought a little device that measures the voltage and current of the charge. And I'm using my own Quick Charge 3.0 wall charger.
When the screen is off or powered down, it charges at 9V/1.8A max. Resulting in about 16W of power. Which is pretty much what the supplied LG charger delivers.
When the screen is on, it charges at 5V/0.5A
My QC3.0 charger is capable of up to 9V/2A and 12V/1.5A, 18W of power. The V20 doesn't seem to draw that much power. And now I'm starting to doubt the V20 is truly a QC3.0 device.
BozQ said:
I bought a little device that measures the voltage and current of the charge. And I'm using my own Quick Charge 3.0 wall charger.
When the screen is off or powered down, it charges at 9V/1.8A max. Resulting in about 16W of power. Which is pretty much what the supplied LG charger delivers.
When the screen is on, it charges at 5V/0.5A
My QC3.0 charger is capable of up to 9V/2A and 12V/1.5A, 18W of power. The V20 doesn't seem to draw that much power. And now I'm starting to doubt the V20 is truly a QC3.0 device.
Click to expand...
Click to collapse
I'll grab voltage/amp reader that I have at home and test my 3 QC 3.0 chargers I have (I'll drain phone to around 20% and then test them and see how it goes) - I'm going to test with the phone off so it pulls the max and see what it ends up with
I have this at work
https://www.amazon.com/gp/product/B018RR30TK
I have this at home
https://www.amazon.com/gp/product/B01FCZACFA
And this in the car
https://www.amazon.com/gp/product/B01CCBGR1U
g1981c said:
yeah it fluctuates a lot. i gave up on apps and just using Kill-a-watt now which is a physical power meter you insert into 120V outlet. it shows power draw from charger, not output, but we can assume about 90% efficiency from input to output of charger.
i let the V20 drain to 40% overnight and restarted the test today. with the extension cord it went up to 16 watt draw from outlet and stayed there - charge quickly went up to 55% then i tried without the extension cord and now its only at 11 watts. this is with both screens off. so far my conclusion is that using an extension cord makes no difference but the level of charge on the phone does impact the charging speed. you need to drain the phone to measure full charging speed.
i will continue with my testing but i am somewhat relieved. 16 watts is close to spec, in fact the spec is 16 watt but on the OUTPUT side of charger, not input, so i'm withing about 10% of spec.
i'm also a lot less nervous buying charging cables now that i verified 16 watt charging over many years old USB 2.0 extension cord ...
EDIT: wow it went from 55% to 68% while i was typing this message ! this is very different from what i saw yesterday ... it was running at 11 watts while i was typing. looks like the phone charges fast as long as it is: 1) drained and 2) left alone. if the phone is almost full and you keep playing with it the level of charge barely changes.
EDIT: at 89% charge it's now down to just 4 watts power draw from outlet ... 25% of what it was pulling at 40% charge. so far it looks like it tapers charging speed off gradually with charge level - starts early and tapers it off to almost nothing as it nears full charge ... and all the while it fluctuates with processor and screen use and probably other factors such as temperature. maybe the reason it went to 16 watts when i plugged it in the morning is that the phone was cold from not being used all night and perhaps it now warmed up so the power got tapered.
maybe i'll stop testing it - it seems to be working correctly, just not the way i originally expected it to.
overall i'm disappointed with this phone but the only phone i would trade it for is Pixel XL 128 GB Very Black which is unavailable ... so i guess i will keep it.
the phone i'm most impressed with right now is ZTE Axon 7 i got for my mother - it is shockingly good - if it wasn't for FM radio, IR Blaster, Removable Battery, Laser Autofocus, Dual Camera, Dual Screen and Nougat i would even say the ZTE Axon 7 is BETTER than V20. the main problem with ZTE is it's just not expensive enough for my ego - otherwise it is great. the screen is is super sharp, vivid and punchy, the front facing speakers are loud and crisp and then there's the 2 year warranty. i'm jealous ...
but i will stick with V20 to protect my dignity. because let's face it - if i'm out on a date i want to have the latest, most technologically advanced and most expensive phone - not the cheapest phone, even if it is just as good or better. really happy with my decision to get Axon 7 for my mom though. she loves it as well.
Click to expand...
Click to collapse
Just smh at this whole post. I want my 5 minutes back.
Thats weird, Im using my Note 7 charger on the V20 and it charge the phone completely in less that 2 hours. In my case I always drain my phone to 3% and leave it charging up to 100%. I will check again tonight to be sure.
TempezT said:
Thats weird, Im using my Note 7 charger on the V20 and it charge the phone completely in less that 2 hours. In my case I always drain my phone to 3% and leave it charging up to 100%. I will check again tonight to be sure.
Click to expand...
Click to collapse
I wouldn't drain it that low all the time unless you plan on stocking up on batteries or don't mind depleting longevity of battery quicker than usual.
@rbiter said:
I wouldn't drain it that low all the time unless you plan on stocking up on batteries or don't mind depleting longevity of battery quicker than usual.
Click to expand...
Click to collapse
Tmobile Jump on Demand ftw - I only have devices for 5-6 months tops and then get a new phone
Tested this one one when I got home.
https://www.amazon.com/gp/product/B01FCZACFA
I was getting 9.2v @ 1.67A = 15w of power. This is the max that my USB multimeter can do so it would seem that this charger is good for QC 3.0 as it did fluctuate voltage as needed.
nest75068 said:
Tmobile Jump on Demand ftw - I only have devices for 5-6 months tops and then get a new phone
Click to expand...
Click to collapse
That is still wasteful use on a battery and giving the next guy a raw deal. But to each his own. I try and make everything last and more efficient so the next person feels like they are truly getting an almost lightly used phone. If I sell my note4, they're going to get a lightly used battery on top of the 3 extras, with fixed GPS and better reception and cleaned out USB port with no oxidization. Same with my HTC m8 though that was only used as daily driver for two weeks and then a DAP for trips and occasional home use. Definitely selling the m8. They are basically getting a lightly used phone and the battery should still have some good life coming out of it. And personally I think jump is overpriced leasing but I guess you can drive it like you stole it. I prefer handing down the best experience I can to the next person.
@rbiter said:
That is still wasteful use on a battery and giving the next guy a raw deal. But to each his own. I try and make everything last and more efficient so the next person feels like they are truly getting an almost lightly used phone. If I sell my note4, they're going to get a lightly used battery on top of the 3 extras, with fixed GPS and better reception and cleaned out USB port with no oxidization. Same with my HTC m8 though that was only used as daily driver for two weeks and then a DAP for trips and occasional home use. Definitely selling the m8. They are basically getting a lightly used phone and the battery should still have some good life coming out of it. And personally I think jump is overpriced leasing but I guess you can drive it like you stole it. I prefer handing down the best experience I can to the next person.
Click to expand...
Click to collapse
My devices go back to tmobile which then go back for refurbishment. With the V20 it's easy for them to just replace the battery.
And you really think they do?
@rbiter said:
And you really think they do?
Click to expand...
Click to collapse
Who knows but tbh it's not my issue at that point.
nest75068 said:
I have this at work
https://www.amazon.com/gp/product/B018RR30TK
Click to expand...
Click to collapse
Just tested this one at work. Phone was at 28% and I had been streaming Youtube for a good 2 hours before doing the test.
Ended up pulling 9.17v @ 1.68A = 15.40 watts (again maximum that my tester can do).
I'll be ordering a new tester that can handle up to 25A and testing again to see if I can pull the max 18watts of power that the QC 3.0 chargers says it can deliver
nest75068 said:
Just tested this one at work. Phone was at 28% and I had been streaming Youtube for a good 2 hours before doing the test.
Ended up pulling 9.17v @ 1.68A = 15.40 watts (again maximum that my tester can do).
I'll be ordering a new tester that can handle up to 25A and testing again to see if I can pull the max 18watts of power that the QC 3.0 chargers says it can deliver
Click to expand...
Click to collapse
You mean 25W charger?
Which charger is that? Do share, please.
BozQ said:
You mean 25W charger?
Which charger is that? Do share, please.
Click to expand...
Click to collapse
No it's a USB Mutlimeter
https://www.amazon.com/dp/B01J7236K2
It will support up to 30V testing and 5A (but there is no charger that I know of that can do that much lol)
nest75068 said:
No it's a USB Mutlimeter
https://www.amazon.com/dp/B01J7236K2
It will support up to 30V testing and 5A (but there is no charger that I know of that can do that much lol)
Click to expand...
Click to collapse
I see.
This looks like a good device.
There are time on my v10 where I'll plug it in and it will charge at a reduced rate so I have to unplug it and plug it back it and it changes to fast charge, that's just been my experience. This is using factory plug and adapter too.
So you might want to make sure the phone says "fast charging" and not "charging".
Sent from my LG-H901 using XDA-Developers mobile app
Hi
Just put in a brand new battery and the phone will not go into turbo charge. Best I can do on any charger is about 500mAmps. Battery will barely hold it's own when the display is on. Let me go through the specifics:
Battery was acting erratic (random shutdowns, short life) and was replaced with a labeled Motorola branded battery. I believe it was charging in turbo mode before replacing, but it was so erratic I can't say for absolute certain. No drama on the installation, it went very smooth.
Battery capacity is now great. The random reboots stopped.
Charging is very slow, less than .5amps. It says that it is charging off a USB port. It does not give the turbo charge message.
Tried four different quick chargers (2.0 and 3.0) and a few different cables. Also tired it on a 2amp USB charger. At least two cables were brand new. All the same.
Cleaned out the USB port on the phone. Thorough cleaning a couple of times, not much junk out came out. Also tried some alcohol to clean the contacts. The connection feels tight and has positive lock. No help from that.
Factory reset. No help.
It has had a couple full charge/full discharge cycles. No difference in charge rate.
I have a USB detector that I can plug into the charger and run the charge cable out of it to the phone. It shows 5.2volts and about .4 or .5amps. Doesn't show the high voltage charge (about 8volts if I remember).
One thing that is funny is the charge rate as reported from Ampere. It first reports 1-1.5 amps initially and then goes back down to .5 amps. I suspect it is Ampere acting funny, not the phone. The USB detector does not show the initial high current. There might be a clue in there somewhere.
The phone is running stock Nougat and is not rooted. I am beginning to think it may be a software issue.
Any ideas?
John
OldTacoman said:
Hi
Just put in a brand new battery and the phone will not go into turbo charge. Best I can do on any charger is about 500mAmps. Battery will barely hold it's own when the display is on. Let me go through the specifics:
Battery was acting erratic (random shutdowns, short life) and was replaced with a labeled Motorola branded battery. I believe it was charging in turbo mode before replacing, but it was so erratic I can't say for absolute certain. No drama on the installation, it went very smooth.
Battery capacity is now great. The random reboots stopped.
Charging is very slow, less than .5amps. It says that it is charging off a USB port. It does not give the turbo charge message.
Tried four different quick chargers (2.0 and 3.0) and a few different cables. Also tired it on a 2amp USB charger. At least two cables were brand new. All the same.
Cleaned out the USB port on the phone. Thorough cleaning a couple of times, not much junk out came out. Also tried some alcohol to clean the contacts. The connection feels tight and has positive lock. No help from that.
Factory reset. No help.
It has had a couple full charge/full discharge cycles. No difference in charge rate.
I have a USB detector that I can plug into the charger and run the charge cable out of it to the phone. It shows 5.2volts and about .4 or .5amps. Doesn't show the high voltage charge (about 8volts if I remember).
One thing that is funny is the charge rate as reported from Ampere. It first reports 1-1.5 amps initially and then goes back down to .5 amps. I suspect it is Ampere acting funny, not the phone. The USB detector does not show the initial high current. There might be a clue in there somewhere.
The phone is running stock Nougat and is not rooted. I am beginning to think it may be a software issue.
Any ideas?
John
Click to expand...
Click to collapse
It could be the battery. Buying batteries has seemed to be trial and error for this phone. Where did you buy the battery from?
I know that problem with batteries. It's like a 50/50 chance of getting a decent one. I seem to have found a pretty good one. It was off Amazon, but it was branded Motorola. It says so right on front, if that is worth anything. It charges (just very slowly) and has great life. The phone used to do random reboots on the old battery, that is cured. I am inclined to think it is not the battery. Is there some specific check that you know of that would rule it out?
Thanks for the idea.
John
Fit the old battery again, if it turbo charges then the problem is the new battery.
good idea.
kadopt said:
Fit the old battery again, if it turbo charges then the problem is the new battery.
Click to expand...
Click to collapse
That was a good idea. I gave it try but it was still in the awful slow charge mode. But that old battery was junk, no life and random reboots. Based on the condition of the battery, that may not have been a great test I will just button it up one last time and recharge it every night. On the plus side: Life on the new battery is as good as when the phone was new. That is a very nice phone and I would buy another new one if they were available.
Thanks for the idea
John