I Flashed The kdz File for LS980 now my phone not detecting any sim Card Urgent Help ?:crying:
Ls980 is locked to sprint. If you want to get sim detected, unlock it (there is a thread in ls980 section) or flash another rom (multi variant).
_____________________________________Read more write less and be smart
is there any way to unlock pattern of my phone without loss data ??
grand prime g531h
i tried flash twrp recovery but the frp lock is on prevent me to do this
USB debugging is off and oem is disabled
I was on CM13 nightlies till cm14 released.
Then I installed CM14 by TheStrix
But then i again wanted to go back....I again went to CM13.....but I lost IMEI....then I flash official MIUI 8.1 global
Everything became normal. Except SIM2.(IMEI restored)
When i insert sim in both slots no sim is working, also wifi doesn't work when both sim are inserted
When i remove sim2 , then wifi and sim1 starts working.
But again when I insert 2 sim wifi and both sim stops working.
So I am using only sim1.
Please help.
I have tried different SIM cards and all roms
SIM1 only --> works;
SIM1+SIM2---> No sim works and wifi also don't turn on.
SIM2 only---> again neither wifi nor sim works
I have used MiFlash and flash all to clear everything. Still not working
From your statement, it seems like you could follow this thread, http://http://forum.xda-developers.com/redmi-note-3/help/dual-sim-one-t3463640
I face the same problem beacose my phone come with miui8 and at the box there is only one imei
I flash miui7 and after that no sim2 only sim1 works.
Here is the solution for Redmi Note 3 Qualcomm 32gb
First dawnload this rom
kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz
From this site
http://c.mi.com/in/thread-24202-1-1.html
Then instal Qualcomm QDLoader USB Drivers
http://xiaomitips.com/download/qualc...r-usb-drivers/
Then instal MiFlashSetup-Beta.zip
http://en.miui.com/thread-281979-1-1.html
Then download http://forum.xda-developers.com/ ... l-fastboot-t3394292
fastboot_edl.7z
In developer option on phone enable usb debagging OEM unlocking
Extract fastboot_edl.7z
duble clikc edl.cmd to put phone in EDL mode
Flash via MiFlash bigota.d.miui.com/6.9.9/kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz
You need to extrackt kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz to MiFlash folder
After flashing disconect phone from PC start phone by presing on buton in setup if you have WIFI conection and Miui acount log in but if you dont have acount pres power buton and tap airplan mode and finish setup.
komunistvb said:
I face the same problem beacose my phone come with miui8 and at the box there is only one imei
I flash miui7 and after that no sim2 only sim1 works.
Here is the solution for Redmi Note 3 Qualcomm 32gb
First dawnload this rom
kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz
From this site
http://c.mi.com/in/thread-24202-1-1.html
Then instal Qualcomm QDLoader USB Drivers
http://xiaomitips.com/download/qualc...r-usb-drivers/
Then instal MiFlashSetup-Beta.zip
http://en.miui.com/thread-281979-1-1.html
Then download http://forum.xda-developers.com/ ... l-fastboot-t3394292
fastboot_edl.7z
In developer option on phone enable usb debagging OEM unlocking
Extract fastboot_edl.7z
duble clikc edl.cmd to put phone in EDL mode
Flash via MiFlash bigota.d.miui.com/6.9.9/kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz
You need to extrackt kenzo_global_images_6.9.9_20160805.0000.29_6.0_glo bal_583523a4c7.tgz to MiFlash folder
After flashing disconect phone from PC start phone by presing on buton in setup if you have WIFI conection and Miui acount log in but if you dont have acount pres power buton and tap airplan mode and finish setup.
Click to expand...
Click to collapse
ok i m trying
i personally tested this bro n its 100℅ works
After flashing cm14 a strange problem happened only 1st slot was working if I put 2nd sim both the sim was not working so ....here is the guide bro just follow it
1.Goto twrp recovery n wipe data cache Dalvik n system
2. then clean flash any cm13 rom or cm13 base rom ( in my case I flash rr rom ) then gapps reboot (u know right how to flash any rom)
Ignore 1 n 2 step if u already on a cm13 base rom
3.after boot up again goto recovery
4. Flash cm13 firmware mod n recovery project
5. Reboot done I m sure ur problem must be solved after that u can flash any rom like MIUI or any both sim will work fine
Link. I have newly created the XDA member account so it's not allowing me to post outside links here I can give u those two files link in what's app bro 8763550592 (plzz don't spam my no ?
same heppend with me i have RN3[SD] 32gb
earlier i m on Miui8 6.9.8[MM 6.0.1] Globle Beta and i flash 8.0.1 goloble Stable from TWRP Recovery
and only 1st sim working if i put 2nd sim i cant use Mobile network i have to Remove 2 sim then only 1st sim works
i had also tried 1st sim and MMC its working fine only Dual sim not works
After this isseus happend with me i have download Fastboot Rom and
first flash
8.0.1 Globel stable with Mi Flash tool the proble is still There after that find some other Fastboot rom
7.3.7
6.7.25
6.7.29
6.7.21
and flash each one by one some flash with Mi flashtool and some flash with EDL method but issues still not slowed
but when i flash 6.9.9 with fastboot or EDL method both Sim works fine now i Can`t go back to miui8 8.0.1 Stable as i want to go badly but i can`t slow this Dual sim issues pls help me if any body can
:crying:
It's bcus of firmware issue .
If u have custom recovery (twrp then try my above guide bro n check is that working for u or not ...
sujitbph said:
If u have custom recovery (twrp then try my above guide bro n check is that working for u or not ...
Click to expand...
Click to collapse
Bro I try everything on Miui fastboot roms..
Did u tried flashing cm13 rom with that firmware did u see my above post ?
Yes i show above post and i only flash miui roms not tryed any other roms..
Try once may it will work for u ..
After flashing the CSC utility from s8 xda forums its shows sim not detected any fix and yes the csc of my phone is ins(india)
I have a working S7 edge oreo 8 phone that I can enable USB debugging and install twrp and take a nandroid backup. I recently bought an identical phone off e bay that I found is FRP locked so I cannot enable USB debugging. Is it possible to install twrp on the FRP locked phone without usb debugging enabled and then install the nandroid backup off the working phone to get around the frp lock? Alternatively if i enter recovery mode on the frp locked phone is it possible to install twrp using the sd card option? Any help would be appreciated