ADB Shell error - Huawei P9 Lite Questions & Answers

Hey all,
I recently bricked my Huawei p9 lite VNS L31 by wiping ALL partitions , I manged to restore all factory images via an adb shell , but whenever I try flashing the vendor.img I am met with the following error:
target reported max download size of 471859200 bytes
sending 'vendor' (424761 KB)...
OKAY [ 10.666s]
writing 'vendor'...
FAILED (remote: Command not allowed)
finished. total time: 10.701s
I have already locked and re-locked my bootloader several tiles (so don't ask me to , erecovery is useless as always as is the dload method)- I have a feeling my drivers are the problem but I an not sure.
Without the stock vendor.img my phone will not boot
Could a kind soul plleeaasee help me?:angel:

Do you have TWRP installed ?

yes

What's your model exactly ? VNS-L31Cxxx ?

FunnkyHD said:
What's your model exactly ? VNS-L31Cxxx ?
Click to expand...
Click to collapse
VNS-L31 c432b171 (nougat version)
VNS-L31 c432b161 (marshmallow version)

Related

[HELP] Can't Flash recovery

Hi there,
I'm new to all this (first post) but I've just received a Zuk z1 which came with ZUI 0.9.096 installed.
I first followed the instructions on cyanogenmod dot org and later found the Tool All in One one here but I seem to run into the same problem on both.
When I attempt to flash TWRP recovery it fails, example error message:
target reported max download size of 1610612736 bytes
sending 'recovery' (10252 KB)...
OKAY [ 0.347s]
writing 'recovery'...
FAILED (remote: Invalid data)
finished. total time: 0.470s
this is the error I get with TWRP 2.8.7 but the error is consistent no matter what version I use.
Anyone have any idea what I can do?
The phone isn't really usable to me without flashing as there doesn't seem to be an app store on it (at least not in English).
Thanks in Advance
Eric
Sgt_Stubby said:
Hi there,
I'm new to all this (first post) but I've just received a Zuk z1 which came with ZUI 0.9.096 installed.
I first followed the instructions on cyanogenmod dot org and later found the Tool All in One one here but I seem to run into the same problem on both.
When I attempt to flash TWRP recovery it fails, example error message:
target reported max download size of 1610612736 bytes
sending 'recovery' (10252 KB)...
OKAY [ 0.347s]
writing 'recovery'...
FAILED (remote: Invalid data)
finished. total time: 0.470s
this is the error I get with TWRP 2.8.7 but the error is consistent no matter what version I use.
Anyone have any idea what I can do?
The phone isn't really usable to me without flashing as there doesn't seem to be an app store on it (at least not in English).
Thanks in Advance
Eric
Click to expand...
Click to collapse
Use dd command to flash recovery or use flashify app, of course first you need to have root rights but there's kingoroot to help although isn't a clean solution might do the trick for you.
Enviado desde mi A0001 mediante Tapatalk
Did you unlock the bootloader?
Hello,
I have the same problem,
I have the same Zui version, ZUI 0.9.096
I unlocked the bootloader, but I'm unable to flash TWRP
KingRoot is not working either, keeps failing

Bricked P9 Lite VNS-L31

Hey,
i had some issues with Nougat so i decided to wipe everything via Revolution Recovery and reinstall MM
but i got some errors..
via Revolution Recovery:
Error: 7
via Fastboot:
target reported max download size of 471859200 bytes
sending sparse ´system´ 1/6 <451240 KB>...
OKAY [11.546s]
writing ´system´ 1/6...
FAILED <remote: sparse flash write failure>
finished. total time: 11.582s
P9 Lite VNS-L31
Bootloader is unlocked
Please help me i have no idea what to do
You shoud NEVER do wipe via twrp on Nougat!
Now try to flash compatible Oeminfo first and have in dload folder a B160/B161 stock firmware
and make repair via 3 keys pressed.
p9litesol said:
can you tell me how to flash oeminfo? i have only access to twrp and fastboot
Click to expand...
Click to collapse
Attach is a zip twrp flashable for VNS-L21 DS C432.
Probably works for L31 too...
I flashed the oeminfo.
Now i am stuck on the logoscreen and i cant even boot to recovery.
Edit:
Probably wrong oeminfo ver.
I fixed it but i cant find a flashable oeminfo vers. for VNS-L31.
Found a ver. for fastboot but when i try to flash it i get this error:
FAILED <remote: Command not allowed>
i tried different versions of oeminfo but when i flash it i get stuck on the logo screen.
Can someone upload a backupfile for me?
Solved! Bought an Oneplus 3t

Failed to run TWRP on ALE-L21

Hi i have flashed my p8 lite with several recovery versions 3.0.2 and 3.1.0 i tried alice, grace and cherry but still have the same problem, only stock huawei recovery shows up after reboot
I have bootloader unlocked and B594 firmware thanks for help
I have a recovery image from this thread
https://forum.xda-developers.com/p8lite/general/twrp-v3-1-0-cherry-kirin-620-t3572004
as i said bootloader is unlocked or at least that's what fastboot says
Code:
$ ./fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.001s]
finished. total time: 0.001s
then i try to flash recovery
Code:
# ./fastboot flash recovery data/twrp-3.1.0-0-alice.img
target reported max download size of 471859200 bytes
sending 'recovery' (24908 KB)...
OKAY [ 0.622s]
writing 'recovery'...
OKAY [ 0.685s]
finished. total time: 1.308s
# ./fastboot reboot
rebooting...
still no twrp but stock huawei eRecovery shows up after pressing VOL UP + PWR buttons
thanks for help
rh84 said:
I have a recovery image from this thread
https://forum.xda-developers.com/p8lite/general/twrp-v3-1-0-cherry-kirin-620-t3572004
as i said bootloader is unlocked or at least that's what fastboot says
Code:
$ ./fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.001s]
finished. total time: 0.001s
then i try to flash recovery
Code:
# ./fastboot flash recovery data/twrp-3.1.0-0-alice.img
target reported max download size of 471859200 bytes
sending 'recovery' (24908 KB)...
OKAY [ 0.622s]
writing 'recovery'...
OKAY [ 0.685s]
finished. total time: 1.308s
# ./fastboot reboot
rebooting...
still no twrp but stock huawei eRecovery shows up after pressing VOL UP + PWR buttons
thanks for help
Click to expand...
Click to collapse
trying going to recovery through ADB
Code:
adb reboot recovery
amageek said:
trying going to recovery through ADB
Code:
adb reboot recovery
Click to expand...
Click to collapse
thanks, it worked
can I use root method from this post for B594 rom?
https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
rh84 said:
thanks, it worked
can I use root method from this post for B594 rom?
https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Click to expand...
Click to collapse
yes you can... if that root file link doesn't work, try from here..
amageek said:
yes you can... if that root file link doesn't work, try from here..
Click to expand...
Click to collapse
thanks it works, so how do i update my phone with a newer rom, say B596? it can't take official updates anymore with TWRP i think
rh84 said:
thanks it works, so how do i update my phone with a newer rom, say B596? it can't take official updates anymore with TWRP i think
Click to expand...
Click to collapse
no you cant install updates with twrp.. But with twrp 3.1.0, i guess you can.. but even though, try with stock recovery..
rh84 said:
Hi i have flashed my p8 lite with several recovery versions 3.0.2 and 3.1.0 i tried alice, grace and cherry but still have the same problem, only stock huawei recovery shows up after reboot
I have bootloader unlocked and B594 firmware thanks for help
Click to expand...
Click to collapse
Just unplug your USB cable. When i reboot to recovery and i have my p8 connected to pc, it shows eRecovery :/
Hey partner,
just opened a thread with the same problem before I've seen yours: https://forum.xda-developers.com/p8lite/help/problem-installing-twrp-ale-l21-stock-t3782728.

Mist built and now problems with bootloader FAILED (remote: Command not allowed)

Hello, and I have mist built yesterday with my Huawei P8 Lite ALE-21 dual Sim.
I wanted to play this Rome yesterday
https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2 b895_update.zip
This did not work and made a mistake.
After that, I re-imported the original ROM without any problems.
After all it was again, I booted into the bootloader / fastboot synonymous but works
as soon as I now the recovery (fastboot flash recovery recovery.img)
I always get the following message.
target reported max download size of 471859200 bytes
sending ´recovery´ (25152kb)...
OKAY [ 0,797s]
writing ´recovery´...
FAILED (remote: Command not allowed)
finished. total time: 0.797s
The bootloader / fastboot is unlocked.
Did I shoot this now?
What could I do about it because the Huawei site where you get
the bootloader unlock code did not work anymore in Germany!!
Would appreciate a response or help very much.
Sorry for the bad english, i have translated with google
EDIT: it work again!
same issue
Hi I have the exact same issue with my Huawei p8 lite I can only go into fast boot mode but it says Phone locked and all my commands give me the exact same error Failed (remote:command not allowed ) and advice for me ? Thank you
Unlock the bootloader again (fastboot oem unlock <code>) and try again

Phone soft bricked but twrp is not working and i can't flash via fastboot

Hi all I've been searching for help but can't find many similar cases to mine.
Here is the situation: after rooting my huawei p8 lite 2017 with magisk I installed xposed framework and it soft bricked my device (again for the third time this week)
I decided to restore a backup i had made, when i had magisk root but no xposed installed, via TWRP
The backup ends but the phone won't boot and TWRP doesn't want to boot either, it continues to boot between twrp and the stock rom without success.
In fastboot i can't find info of my phone to download the right software from a site to do dload but I do have an update.app file for my phone
When i flash boot.img it gives me:
C:\adb>fastboot flash boot BOOT.img
target reported max download size of 471859200 bytes
sending 'boot' (15524 KB)...
OKAY [ 0.389s]
writing 'boot'...
FAILED (remote: partition length get error)
finished. total time: 0.413s
My info is this:
bootloader: unlocked
recovery: not working
huawei eRecovery: tried but failed to boot after
fastboot: partly working
the android version is 8.0
device : PRA-LX1C432B209
I cannot use dload with the update.app from firmware finder
If anyone could help me i would be very thankfull.

Categories

Resources