I just came across this tweak on this website:
http://www.pocketpctweaks.com/pocketpc_tweaks/Minimize_tapping_Pressure
I tried it and it works great. I now use less pressure on the screen.
What ever you do, don’t set the value below the default of 7526. If you do, you may set it too low, the sensitivity will be too low and you will have to perform a Hard reset.
Here is the tweak from the website listed above:
Minimize Pressure when Tapping the screen
Ever got used to tapping without screen protectors and suddenly you put some screen protector and have a pecuilar feeling (some-what like tapping harder than u normally do) due to the increase thickness of the protector?
Well i have gone to that and finally ive done some simple tweaks to my xda mini.
I also figure out this could lessen normal wear and tear(scratching of protectors/PDA screens) since lesser pressure is applied to Tap the screen
here's what i did..
HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Touch
If not there try here:
HKLM\Drivers\Touchpanel\ Pressure Threshold
or find 'Threshold'
Change the value of Pressure Threshold.(INCREASE value ONLY!!!)
what i did is set the value at 11880.
i tried doubling the default value. until i have reached my desired setting.
now,its like tapping soflty without having a feeling that i have screen protector. Also less stress on the stylus and screen and faster tapping.
WARNING: Only INCREASE THE VALUE BUT NEVER THE DECREASE THE DEFAULT VALUE.
Lowering the value of Pressure Threshold means you need to apply more pressure in tapping than you normally do.
ive tried this and when i soft reset, the screen won't react even if i apply deep pressure in tapping so i needed to do a HARD Reset!!!
So don't ever think of lowering the value, JUST INCREASE but NEVER LOWER!!
Tweak open for comments.
thanks...
Thanks, this tweak worked wonderfully!
I dont use a screen protector (for now at least) and I noticed an improvement in sensitivity as well when I set it to 11880.
disabling the touch pad configuration at startup
is it possible to disable the touch pad configuration at
the initial start up.my touchpad isnt functioning and i
wish anyone would help me with a rom that doesnt allow
you to configure the touch panel so you can go straght to
the system.
my Pda is
tmobile MDA USA
IPL 2.26.
SPL 2.26.
GSM 02.25.11
OS 2.26.10.2
thanks in advance
rusar said:
is it possible to disable the touch pad configuration at
the initial start up.my touchpad isnt functioning and i
wish anyone would help me with a rom that doesnt allow
you to configure the touch panel so you can go straght to
the system.
my Pda is
tmobile MDA USA
IPL 2.26.
SPL 2.26.
GSM 02.25.11
OS 2.26.10.2
thanks in advance
Click to expand...
Click to collapse
I posted a thread about this before. Nobody answered but I finally found the answer on my own. What you have to do is to make sure you have a storage card and put a file called welcome.not in the root of it. There doesn't have to be anything in it, you can just open notepad and save the blank file with that name. That tells the device to skip the whole welcome bit with the touch screen calibration and all that.
I may not have the name exactly right, it's been several months. But if you do a search on threads started by me you can probably find it.
i saw this in another link and they said to put it at 240, i listened and i had to hard reset. thank you for clearing things up buddy
hey, the link for the program is bad i was wondering if any one could post the a link for it i have looked everywhere. I have a prob. alighning screen and would like to see if changing the sensitivity will somehow help.
Use Schap's Advanced Configuration Tool. Saves you a ton of brainwork, since it's just doing the registry edits for you. Can also be used to tune your Bluetooth Stereo setup, and a host of "basic" UI modifications.
Hi all at this forum
The Link±
Increase the sensitivity of Touch Screen
I just came across this tweak on this website:
http://www.pocketpctweaks.com/pocket...pping_Pressure
dont work anymore...
Has anybody got an actial link???
And... Does this work for a samsung i900?
With regards
VArmand
Works great for me - thanks colouro
For the max senstivity set both fingerpressure and threshold to -1 or FFFFFFFF in Hex..
So i was wondering it doesnt look like there are too many things for them here...
Can i use things from the Elf threads?
Or am i limited to the Nike threads?
Thanks in advance.
i think u can. do u have the one with the grey button in the middle? i got that one too , everything works, but if u have the neon, u have to use the neon roms just look beyond the battery, theres the exact name of the device
hey i just got my touch dual as well, its the us version with the qwerty, i don't like the large menu thing, so when i turned it off, there went my large title bar(battery, connections, etc) will the cab for the large title bar for the kaiser work on the touch dual?
Hi all,
I found a Software called systemcolor.net (see here: http://www.pocketpc-software-downlo...-kai-s-systemcolor-net-download-hbuqwcxq.html).
It is an interesting tool to change the color of the system (top and bottom bar) depending on certain events (new sms...).
I tried the demo but it wasn't working on my touch (could not set the flags to activate it). Another thing - it is commercial...
Does anybody have a similar app for this purpose?
Thanks!
MM
RC Mod works well for changing the top and bottom bar colors, but it doesn't do it based on events. I've yet to hear of a program that did that...
mm1804 said:
Hi all,
I found a Software called systemcolor.net (see here: http://www.pocketpc-software-downlo...-kai-s-systemcolor-net-download-hbuqwcxq.html).
It is an interesting tool to change the color of the system (top and bottom bar) depending on certain events (new sms...).
I tried the demo but it wasn't working on my touch (could not set the flags to activate it). Another thing - it is commercial...
Does anybody have a similar app for this purpose?
Thanks!
MM
Click to expand...
Click to collapse
i use base hue express.
auswims said:
i use base hue express.
Click to expand...
Click to collapse
hm...base hue express does not change colours on events! I think this would be a really nice function because there is no need for a icon change or anything else...
There is a great piece of software posted on these forums called Settings+ or Settings++ something like that. It does what you want with a very small memory footprint. Works great in my opinion.
computerjunkie said:
There is a great piece of software posted on these forums called Settings+ or Settings++ something like that. It does what you want with a very small memory footprint. Works great in my opinion.
Click to expand...
Click to collapse
Cool tool, but also not event triggered
Hi guy I used to have some application that allows me to change what diamond will do when I click somewhere on display. Example the X on right corner close app and I used to have set than when I click on battery icon next to the X I could set than it did the same as original X icon. Not open a battery.
Problem is I can not remeber which application it was (((
can anyone help me ? thank a lot
Hey friends,
those who are using Dharam's ROM Collection do the following:
1) You got questions?? Fire Away
2) You got requests?? Sure Tell Me
3) You got to know something?? Lets Discuss
4) You got nothing?? give me feedback to improve...
Reserved for questions
Testers Required
Hey guys,
I am looking out for some testers for Dharam's ROM Collection...
If you are interested, then PM me..
Please dont POST here if you are interested...PM me
Ok, let's start with me
I flashed clean performance rom a few hours ago and I face with one problem - I need to unlock screen first when someone is calling to me.. What's more if I unlock screen I see.. nothing - just black blank screen. I have to guess where is the slider that answer the call and slide it on black screen (I can't see this slider). It's very uncomfortable. It is anyway to fix it? I have never seen it in previous roms. I use epic unlock screen.
Sorry for my broken english.
benzyniarz1 said:
Ok, let's start with me
I flashed clean performance rom a few hours ago and I face with one problem - I need to unlock screen first when someone is calling to me.. What's more if I unlock screen I see.. nothing - just black blank screen. I have to guess where is the slider that answer the call and slide it on black screen (I can't see this slider). It's very uncomfortable. It is anyway to fix it? I have never seen it in previous roms. I use epic unlock screen.
Sorry for my broken english.
Click to expand...
Click to collapse
Do you have any lag anytime ??
dharamg3 said:
Do you have any lag anytime ??
Click to expand...
Click to collapse
Yes, my mobile phone with sometimes slows down for 1 - 2 mintues (2 times so far). Then it backs to the normal. I use SetCPU - min 87 MHz, max 800 MHz.
benzyniarz1 said:
Yes, my mobile phone with sometimes slow down for 1 - 2 mintues (2 times so far). Then back to the normal. I use SetCPU - min 87 MHz, max 800 MHz.
Click to expand...
Click to collapse
Which governor in SetCPU??
dharamg3 said:
Which governor in SetCPU??
Click to expand...
Click to collapse
Sorry, I'm afraid I don't understand what this mean. Scaling is conservative if you would like to ask. If I'm wrong, I'd be very grateful if you could tell me where I can find info in SetCPU of this "governor".
benzyniarz1 said:
Sorry, I'm afraid I don't understand what this mean. Scaling is conservative if you would like to ask. If I'm wrong, I'd be very grateful if you could tell me where I can find info in SetCPU of this "governor".
Click to expand...
Click to collapse
you are right...its the same...and conservative has this known bug if you go through FuguMod thread..
I recommend you try OnDemand(for battery ) or Performance(for performance )...if u get lag at min.83mhz then increase min. to 166mhz...that should solve your black screen problem also
try that for a day and let me know if u still getting that problem
dharamg3 said:
you are right...its the same...and conservative has this known bug if you go through FuguMod thread..
I recommend you try OnDemand(for battery ) or Performance(for performance )...if u get lag at min.83mhz then increase min. to 166mhz...that should solve your black screen problem also
try that for a day and let me know if u still getting that problem
Click to expand...
Click to collapse
Ok, thanks a lot
I will try to set SetCPU according to your advices and I will send you PM with result tomorrow, I promise
--
Oh and one thing - thanks for a ROM. It's really good - light, simply and optimized. Good job
I got a question to the Kitchen 2.0 you offering.
Is it possible to flash a kitchen rom and then flash the fugumod beta 3 (800mhz) or must this be included in the kitchen rom?
hakkun said:
I got a question to the Kitchen 2.0 you offering.
Is it possible to flash a kitchen rom and then flash the fugumod beta 3 (800mhz) or must this be included in the kitchen rom?
Click to expand...
Click to collapse
Yes u can...it is not there as it was nt released whe kitchen v2.0 was released...
My problem with black screen seems to be solved
But I got other one. I used to use GO SMS Pro as my sms manager, but now I can't. I can't set GO SMS as my default sms manager when I tap on sms icon on dock bar in stock launcher. It always starts stock sms manager. Tried to clear default settings, but it's not working. In other places there is no problem - when I want to use sms manager in contacs (for example) I get a list of installed sms managers and I can choose the one I want to. But not in case of using sms icon on dock bar. I would like to avoid installing other launcher.
Ok, you can forget - I simply replaced default sms icon with GO SMS PRO on dock bar. But go sms pro is not working with unlock screen
benzyniarz1 said:
My problem with black screen seems to be solved
But I got other one. I used to use GO SMS Pro as my sms manager, but now I can't. I can't set GO SMS as my default sms manager when I tap on sms icon on dock bar in stock launcher. It always starts stock sms manager. Tried to clear default settings, but it's not working. In other places there is no problem - when I want to use sms manager in contacs (for example) I get a list of installed sms managers and I can choose the one I want to. But not in case of using sms icon on dock bar. I would like to avoid installing other launcher.
Ok, you can forget - I simply replaced default sms icon with GO SMS PRO on dock bar. But go sms pro is not working with unlock screen
Click to expand...
Click to collapse
that must be the problem of go sms pro i think..does it work with unlock screen in any other ROM??
I am afraid I can't say that.. I was using the widgetlocker lockscreen before (there was no problems with notifications on lockscreen), so I have no idea what about stock lock screens. In the worst case, I'll become accustomed.
All right, next problem is related to messaging. 5 times (so far) I've got a notification about new message. But there was no new messages in sms manager. It's weird but it is true. I'm sure sb sent me a message but I got only notification. I've took a look and I noticed, that it sometimes happen when I'm doing something with the phone that use a lot of processor (I guess) (for ex. installing apps)
No matter if I use stock sms manager or GO SMS PRO.
I haven't got such a problem before.
Could it be kernel bug? or ROM?
benzyniarz1 said:
All right, next problem is related to messaging. 5 times (so far) I've got a notification about new message. But there was no new messages in sms manager. It's weird but it is true. I'm sure sb sent me a message but I got only notification. I've took a look and I noticed, that it sometimes happen when I'm doing something with the phone that use a lot of processor (I guess) (for ex. installing apps)
No matter if I use stock sms manager or GO SMS PRO.
I haven't got such a problem before.
Could it be kernel bug? or ROM?
Click to expand...
Click to collapse
Hmmm...weird...i bever got a problem...anyone else getting this problem??
Sent from my GT-I5800 using XDA App
Hey guys, Dharam's Stock Ultimate ROM v1.0 is released...please give feedback if u have flashed it
Hello,
i installed the Stock Ultimate ROM.
First (short) feedback:
- i like the font
- the procentage of the battery status does not fit in the symbol
- i installed two apps with the app-installer. Both apps runs not correct.
- the telephone lags a lot
Before i had the Ultra Clean Rom:
- Is it possbile to insert directly a picture viewer?
Regards
Trocken12 said:
Hello,
i installed the Stock Ultimate ROM.
First (short) feedback:
- i like the font
- the procentage of the battery status does not fit in the symbol
- i installed two apps with the app-installer. Both apps runs not correct.
- the telephone lags a lot
Before i had the Ultra Clean Rom:
- Is it possbile to insert directly a picture viewer?
Regards
Click to expand...
Click to collapse
Thank you for the feedback...
1) battery status is dependent on the theme...aarrun has made it this way...maybe the original is only this way...i do not mod the themes...i'll ask aarrun if he can change the battery icons for future versions...
2) which apps are u trying to install??i'll try them out..
3) for the lag, use SetCPU and change to OnDemand or Performance...
4) u can directly install a picture viewer from the Market...