Hi, my redmi pro fallen and the front glass is cracked. The screen and the touch digitizer are working good so I was thinking about replacing the front glass only. Does anyone know how to detach the glass from the screen?
This is the replacement part:
https://www.aliexpress.com/item/Hot...Screen-Glass-Cover-For-Redmi/32725342555.html
Thank you
Related
I bought this front glass Ebay
I unmount Screen Lens Glass already and touchscreen working without front glass just when i put new glass (from link aboved) is not working:/ What is the reason of this situation? bad part?
Hello.. I had dropped my N4 and the front glass got cracked.. The LCD is fine but touch is not responsive with half of the screen. I'm planning to change just the digitizer. Since the LCD and the digitizer are fused together, we use heat to separate the digitizer from the LCD. But how to paste the replaced digitizer back to the LCD?? Should i use some adhesive tape?? or this ??
Please advise
Thanks
I think you need to use LOCA.
http://en.wikipedia.org/wiki/Liquid_optically_clear_adhesive
Dear XDA,
I have a note 3 with a cracked screen. The LDC works, but the digitizer is cracked. Now I know that there is a digitizer and an LCD and those are two different things, but now I see that there is something like glass. There is no connection from the glass to the screen, only the crystal UV glue holds it in place. Is it a digitizer with different technology? I do not want to remove the broken glass, put the glue, put the new glass, and then get no touch.
A quick answer will be very helpful, thank you!
(if the digitizer really is the glass, how does it transmit the touch senses to the phone without any connectors?)
My understanding is that the glass on top of the LCD is tantamount to a glass screen protector. If you removed the glass and touched the screen directly, it would respond to finger touches because the digitizer resides beneath the LCD.
Heya,
So I managed to crack the glass back screen of my Yotaphone 2 YD206. The e-ink works normally, only the glass cracked. I wonder if the e-ink screen is glued to the glass, so I would need only the glass screen or the entire back screen?
Is there a way to get a replacement so I can replace it by myself, or just with my official supplier?
Thanks in advance.
Hi, I opened mine up some time ago, and yes the epd seems very glued to the glass, but its pretty easy to replace if you can find replacement parts. No heatgun needed, just a t5 screw driver and some plastic plectrums or something like that to pry it open.
Hi
i have a sm-j500fn which had a cracked top glass ive removed the top glass leaving the lcd and digitizer intact and working
but im finding it impossible to find a replacement glass the only ones ive managed to find already have the digitizer attached
and has the word duos at the top. Anyone know where i can get the glass only ?
replacing the glass only makes you separate The amoled "panel" and all other parts from the glass. it is recommended to buy New Screen Module, with Digitizer, LCD, amoled panel, Screen.