Database Users

[Guide] How to install Magisk 15.2 on kenzo (if having issues)

If you are updating Magisk from 14 and are getting Magisk not installed error then this is what you will need to do,
Note you will probably have to start with a new clean Magisk install.
Only tested with Global Beta MIUI9
1. The main problem is caused by using a old TWRP (for example ZCX), so you will need to update to a more recent TWRP. - After you updated your TWRP follow these steps.
2. Flash the Magisk Uninstaller, if it says "Magisk Not installed" then go to Step 3 otherwise skip to Step 4.
3. Flash Magisk 14.0 after it completes , Re-Flash the Magisk Uninstaller to cleanup all OLD Magisk files.
4. reboot to system, make sure the Magisk Manger is gone, then reboot to recovery again.
5. Flash Magisk 15.2 , reboot, install the Magisk Manager if it's missing.
6. Under settings -> apps -> Magisk Manger, set allow on startup, allow storage permissions, and No Rstrictions for MIUI Battery Saver.
and you should have a fully working Magisk 15.2 now, I suggest rebooting once more to recovery and clearing Dalvik Cache. (Note Clear Dalvik Cache is in the Wipe -> Advanced Wipe -> then only check Dalvik /ART Cache partition, do not select anything else!)
Do all modifications at own risk or devices risk.

nop this did not worked for me on miui 8 global stable redmi note 3 kenzo only magisk 14 works when i try flashing 15.2 it result in bootloop m using latest official twrp 3.2.1.0

Not working. it's still not installed for me. I am using the official TWRP 3.2.1.0

OK I will try looking into it some more, after the latest MIUI9 update same thing happened even with newest twrp, said not installed, but after I rebooted and tried flashing 15.2 again it installed, so very odd why sometimes it works and other times not.

I've miui 10.2.1.0 with zcx recovery can i install magisk with his recovery

hemant114 said:
I've miui 10.2.1.0 with zcx recovery can i install magisk with his recovery
Click to expand...
Click to collapse
Use latest 3.3.1 twrp

will u pls elborate
can i install through zcx or ive to WIPE AND FLASH.....

Update your recovery and flash magisk. No wipes needed

as u saying update recovery as per my search which recovery is good redwolf or twrp off. as I'm on miui 10.2.1.0 stable and zcx recovery is installed & want to add magisk plz need suggestion

hemant114 said:
as u saying update recovery as per my search which recovery is good redwolf or twrp off. as I'm on miui 10.2.1.0 stable and zcx recovery is installed & want to add magisk plz need suggestion
Click to expand...
Click to collapse
Official twrp.

it shows error cant update partition..... something

Solved-Help my Land always boot to recovery not to system

My redmi 3sprime already ubl+twrp redwolf+no root+Malmifa.
Want to flash cusrom Oreo 8.1
Advanced wipe+ flash cusrom+flash gapps nano+ reboot system
When reboot system ,boot to logo room 5 minutes, but always back to recovery twrp redwolf.
SOLVED
Sent from my Redmi 3S using Tapatalk

1st download ROM(non-treble ROM)
If u want to treble ROM flash treble supported recovery
Download gapps
Entre twrp
Wipe-advance wipe-data&dalvik cache - except storeges
Wipe all thing
Now install ROM , gapps , and lazyflazher
And reboot
Njy

How to update AOSP extended ROM

Hey everyone I recently installed aosp extended and saw in their website that a newer version was available when I checked a youtube video it said that I needed to flash gapps along with the update can someone help me on how to update the ROM is it same like pixelexperience where we just flash the file and clear cache alone?

#updateaex
1. Boot into TWRP
2. Flash AEX zip
3. Flash TWRP installer
4. Reboot to TWRP
5. Flash gapps
6. Flash magisk (optional)
7. Wipe dalvik cache
8. Reboot to system and enjoy
from telegram channel
But, what's your actual version of AEX ?

Sorry to but in...
I have a Mi9 with AOSP...
(please go easy..I'm a tad clueless)
If there is an update do I follow the instructions 21vm gave? And will I lose my apps and settings?

[ROM] [GSI] Android 10 AOSP

Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom

fer15 said:
Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom
Click to expand...
Click to collapse
Very nice.Thank you much more.

[GUIDE] [J400X] How To Install GSI in Samsung Galaxy J4

• Introduction
Samsung Galaxy J4 is a phone based on Exynos 7570 with 720x1280 resolution, ARM Mali T720 GPU, Cortex A53 Quad-core CPU. This phone released in 2018 with Android 8 shipped out-of-box, and available OS update until Android 10.
But, since it already 2 years (in 2020) from launched, this phone only have developer that can be counted on one hand. There is no custom rom for this device, and custom kernel only 1 or 2 or 3 (I'm building this kernel right now, but I'll release it when I have enough post count )
The good news is, this device is Treble supported! So we can install most of available GSI, even without any vendor or kernel required.
• Stock ROM vs GSI
What's the different? In my opinion, very much! As we know, GSI is based on AOSP, which is pure android, and almost no bloatware. And, for other GSI, like Havoc or Lineage or any GSI like that, have cool theme and animation. Why not giving a try?
• Warning
Although this is cool, but, remember this is GSI, bugs are widely open. Bugs I found are in below.
Second thing, your warranty is void! This is sure, you unlock bootloader, Install TWRP, even install GSI, that surely will trip knox and voiding warranty.
And, last one, backup ALL of your data. This process will wipe your data partition.
• Bugs
As far as I use Havoc-OS GSI 3.7 Android 10, I feel these bugs:
1. Camera Streching, use Open Camera
2. Video recording, use Open Camera too
3. Camera in Whats'App
4. I forgot
If you feel other bugs, please write it in below.
• Steps
Since currently this phone have Android 9 Android 10 update, the steps will be different. Dont worry, I'll write all the steps
From Android 9 stock :
1. Download TWRP 3.2 and 3.4
2. Copy to your PC
3. You must have Odin
4. Download GSI image A64 A-ONLY / ARM32_BINDER64 and put it in your Micro SD card or USB (for OTG)
5. Download Gapps (optional if you want google apps installed) nano / pico ARM-10.0
6. Download Magisk if you want root
7. Dont forget to copy downloaded zip file to Micro SD Card or USB (For OTG)
8. Flash TWRP 3.2 via odin, then reboot recovery
9. Wipe - format data - yes
10. Wipe - advanced wipe - choose system, data, internal, cache / dalvik cache
11. Install - install image - choose gsi image you downloaded - choose system image
12. reboot recovery
13. mount - system
14. wipe - advanced wipe - choose system - repair filesystem - resize
15. install - install gapps zip
16. reboot download
17. flash TWRP 3.4
18. reboot recovery
19. flash magisk (optional)
20. flash zygotefix
21. reboot and complete setup
From Android 10 stock :
1. Download TWRP 3.2 or OrangeFox
2. Download any a64 A/B (arm32_binder 64) xz decompress it* and put it in your Micro SD card or USB (for OTG) or internal memory
3. extract it with any extractor app
5. Download Gapps (optional if you want google apps installed, some have it included)
6. Reboot recovery
7. wipe. advance wipe. system, data, dalvick cache.
8. Flash the extracted GSI
9. Flash Gapps if they are not included
10. Flash magisk (optional)
11. Reboot system
And Done!
If you have anything you ask, feel free to join our Telegram group : t.me/SamsungGalaxyJ4
Or PM me in Telegram : t.me/hendramanudinata
Cheers!