My redmi 3sprime already ubl+twrp redwolf+no root+Malmifa.
Want to flash cusrom Oreo 8.1
Advanced wipe+ flash cusrom+flash gapps nano+ reboot system
When reboot system ,boot to logo room 5 minutes, but always back to recovery twrp redwolf.
SOLVED
Sent from my Redmi 3S using Tapatalk
1st download ROM(non-treble ROM)
If u want to treble ROM flash treble supported recovery
Download gapps
Entre twrp
Wipe-advance wipe-data&dalvik cache - except storeges
Wipe all thing
Now install ROM , gapps , and lazyflazher
And reboot
Njy
Related
If you are updating Magisk from 14 and are getting Magisk not installed error then this is what you will need to do,
Note you will probably have to start with a new clean Magisk install.
Only tested with Global Beta MIUI9
1. The main problem is caused by using a old TWRP (for example ZCX), so you will need to update to a more recent TWRP. - After you updated your TWRP follow these steps.
2. Flash the Magisk Uninstaller, if it says "Magisk Not installed" then go to Step 3 otherwise skip to Step 4.
3. Flash Magisk 14.0 after it completes , Re-Flash the Magisk Uninstaller to cleanup all OLD Magisk files.
4. reboot to system, make sure the Magisk Manger is gone, then reboot to recovery again.
5. Flash Magisk 15.2 , reboot, install the Magisk Manager if it's missing.
6. Under settings -> apps -> Magisk Manger, set allow on startup, allow storage permissions, and No Rstrictions for MIUI Battery Saver.
and you should have a fully working Magisk 15.2 now, I suggest rebooting once more to recovery and clearing Dalvik Cache. (Note Clear Dalvik Cache is in the Wipe -> Advanced Wipe -> then only check Dalvik /ART Cache partition, do not select anything else!)
Do all modifications at own risk or devices risk.
nop this did not worked for me on miui 8 global stable redmi note 3 kenzo only magisk 14 works when i try flashing 15.2 it result in bootloop m using latest official twrp 3.2.1.0
Not working. it's still not installed for me. I am using the official TWRP 3.2.1.0
OK I will try looking into it some more, after the latest MIUI9 update same thing happened even with newest twrp, said not installed, but after I rebooted and tried flashing 15.2 again it installed, so very odd why sometimes it works and other times not.
I've miui 10.2.1.0 with zcx recovery can i install magisk with his recovery
hemant114 said:
I've miui 10.2.1.0 with zcx recovery can i install magisk with his recovery
Click to expand...
Click to collapse
Use latest 3.3.1 twrp
will u pls elborate
can i install through zcx or ive to WIPE AND FLASH.....
Update your recovery and flash magisk. No wipes needed
as u saying update recovery as per my search which recovery is good redwolf or twrp off. as I'm on miui 10.2.1.0 stable and zcx recovery is installed & want to add magisk plz need suggestion
hemant114 said:
as u saying update recovery as per my search which recovery is good redwolf or twrp off. as I'm on miui 10.2.1.0 stable and zcx recovery is installed & want to add magisk plz need suggestion
Click to expand...
Click to collapse
Official twrp.
it shows error cant update partition..... something
Hello A2 users
If you convert your Mi A2 to Mi 6X (Android One to MIUI) the updater in MIUI by xiaomi.eu will install Xiaomi ARB (Anit Rollback protection) and you will stuck in MIUI if ARB is installed, for update MIUI without install ARB you need use TWRP and I already delete firmware-update folder for delete ARB from the MIUI update.
1 - Download TWRP.zip and the MIUI update
2 - Reboot your phone in fastboot and connect your phone at your PC
3 - Extract TWRP folder from TWRP.zip
4 - Launch Flash_TWRP.bat (It's will install TWRP and boot in TWRP)
5 - Put the MIUI update in your phone (MTP is already enabled)
6 - Go to wipe > Advanced wipe > select Dalvik's/ART cache and cache and swipe to wipe
7 - Go to Install and select the MIUI update and swipe to confirm to flash
8 - Reboot system and MIUI update is installed
Photo Guide for Install MIUI update in TWRP : https://photos.google.com/album/AF1QipNsuQZv1ZX0sahYwRWpPUEN77o0djhSkLPnKamp
Thanks to @Abdoubody for [MIUI 10][A2] Install Guide
Nice one dude. Can you also put a guide if someone like me from a Custom ROM with TWRP Recovery installed can flash MIUI on Mi A2 device thanks dude and more power!
Any news???
MaxImbrox said:
Any news???
Click to expand...
Click to collapse
Guide is done
Thanks dude!
i did the flashing correctly but now um stuck on boot loop, the device does not start and stuck on MI logo and reboots into TWRP every time.
Update : i have wiped the delvic, cash and data in TWRP to get rid of the boot loop and worked
i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.
iamranjodh said:
i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.
Click to expand...
Click to collapse
there you go
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/
1. Flash or update to lastest stock rom
2. Boot twrp (don't flash TWRP, just boot) from:
https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637
3. Wipe to factory
4. Install LOS16
5. Reboot to bootloader and boot TWRP again
6. Flash gapps and magisk if you need it
That's what I did and works like a charm but I prefer RR.
Cheers!
ccalixtro said:
1. Flash or update to lastest stock rom
2. Boot twrp (don't flash TWRP, just boot) from:
https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637
3. Wipe to factory
4. Install LOS16
5. Reboot to bootloader and boot TWRP again
6. Flash gapps and magisk if you need it
That's what I did and works like a charm but I prefer RR.
Cheers!
Click to expand...
Click to collapse
This method is not working. We have to use a special bootable TWRP for LOS 16 Official builds.
Sent from my Mi A1 using XDA Labs
---------- Post added at 09:52 PM ---------- Previous post was at 09:33 PM ----------
iamranjodh said:
i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.
Click to expand...
Click to collapse
Try following these steps:
1. Download and boot this TWRP. Only boot it, don't flash it. https://drive.google.com/file/d/1LtLrNnL0h7alZaaOWADvc2Sf5aNkNukM/view
2. Wipe system, data, cache and dalvik. If you are encrypted, make a Format Data.
3. Go to Reboot and select other slot. (For example, if you are on Slot A, select Slot B)
4. Boot TWRP again.
5. Wipe system, data, cache and dalvik. Make a format data again.
6. Install latest LineageOS 16 Official nightly. You can select A or B.
7. Reboot to bootloader.
8. Boot TWRP again.
9. Flash GApps and Magisk (if you want root).
10. Reboot to system and enjoy Lineage!
Sent from my Mi A1 using XDA Labs
1. clean flash rom
2.root with magisk
3.reboot if it stuck on mi logo
4.then dirty flash rom
5.if it boots check if magisk is installed
6.if installed then reboot and install gapps if you need gapps
Enjoy
I do have orangefox recovery flashed into my phone. Wiped data, system, cache... and format data
First of all, I installed MIUI (the latest version from mi website "miui_DAVINCIGlobal_V12.1.4.0.RFJMIXM_e0ac13ed89_11.0.zip"). If I reboot into the system, it works fine.
Then flash magisk(v24.3) and 'disable DM-Verity_ForceEncrypt', and reboot into recovery
When I flash nethunter (nethunter-2022.2-davinci-miui-ten-kalifs-full.zip), which I downloaded from offensive security webpage., it does install well (at least it doesn't show any error messages).
After flashing nethunter, I rebooted into system. When nethunter logo did pop up, it got stuck into that fire animation. I can still access fastboot and recovery menu.
Any idea of what's happening? Why doesn't it boot?
Xylonity said:
I do have orangefox recovery flashed into my phone. Wiped data, system, cache... and format data
First of all, I installed MIUI (the latest version from mi website "miui_DAVINCIGlobal_V12.1.4.0.RFJMIXM_e0ac13ed89_11.0.zip"). If I reboot into the system, it works fine.
Then flash magisk(v24.3) and 'disable DM-Verity_ForceEncrypt', and reboot into recovery
When I flash nethunter (nethunter-2022.2-davinci-miui-ten-kalifs-full.zip), which I downloaded from offensive security webpage., it does install well (at least it doesn't show any error messages).
After flashing nethunter, I rebooted into system. When nethunter logo did pop up, it got stuck into that fire animation. I can still access fastboot and recovery menu.
Any idea of what's happening? Why doesn't it boot?
Click to expand...
Click to collapse
For Magisk you ABSOLUTELY don't need Verity and so
Simply, extract boot.img from the firmware zip and by using Magisk APP take install, Select and Patch to patch your extracted boot.img
Do not enable Recovery option while patching
Then flash from Fastboot the patched boot img to Boot
That's it - the proper way to install Magisk to your Xiaomi ( I used and still use on my Mi 9T from MIUI 10 till now with MIUI 12.5)
For Nethunter I cannot help you. It's been more than two years since I used Kali and at that time it installed flawlessly.
However, then I had MIUI 11 and Kali required MIUI 11 - don't know how is it now...
And btw, I always use the latest TWRP.me version - currently 3.6.1_9-0
zgfg said:
For Magisk you ABSOLUTELY don't need Verity and so
Simply, extract boot.img from the firmware zip and by using Magisk APP take install, Select and Patch to patch your extracted boot.img
Do not enable Recovery option while patching
Then flash from Fastboot the patched boot img to Boot
That's it - the proper way to install Magisk to your Xiaomi ( I used and still use on my Mi 9T from MIUI 10 till now with MIUI 12.5)
For Nethunter I cannot help you. It's been more than two years since I used Kali and at that time it installed flawlessly.
However, then I had MIUI 11 and Kali required MIUI 11 - don't know how is it now...
And btw, I always use the latest TWRP.me version - currently 3.6.1_9-0
Click to expand...
Click to collapse
Thanks for replying