charging issue - HTC U Ultra Questions & Answers

my htc u ultra will charge with the computer but not with any wall plug or other cable

Not even with its box charger?

nope it will only charge with the computer i tried to redtore it with twrp but just got bootloop so i went back to custom rom as the repair shop dont even know whats going on and also htc service center wont help at all

Maybe ita a rom problem, get the stock one.

i tried to restore my restore from twrp but got bootloop so i went back to twrp then flashed the leedroid rom and its working with the new charger but there was no info anywhere about this issue i must be the first one to have this issue

Die you try different cables?
My original charger+cable can only fast charge in one direction, if I rotate the USB c plug by 180 degrees, it only charges damn slow (a couple of hours from 40% to full).
But the only-pc charge thing sounds very strange to me

i didnt think that a changing it back to stock and back to leedroid would have helped but i did try the new cable and wall brick first that didnt work

Alright.. maybe you were using an old firmware that needed an update? I've really no idea, though

It now chargers but it don't fast charge at all the phones 40 days old

Try stock rom, go for oreo, its down on the forum.

im in australia international firmware isnt out yet and i have a backup on twrp but everytime i try restore i get bootloop

panda968 said:
im in australia international firmware isnt out yet and i have a backup on twrp but everytime i try restore i get bootloop
Click to expand...
Click to collapse
Did you flash stock boot.img after restoring stock twrp backup?
If you didn't, then maybe that's causing bootloop

rakeshbro said:
Did you flash stock boot.img after restoring stock twrp backup?
If you didn't, then maybe that's causing bootloop
Click to expand...
Click to collapse
so restore then right after go and flash the stock boot Img then reboot

panda968 said:
so restore then right after go and flash the stock boot Img then reboot
Click to expand...
Click to collapse
Yes, Flash the stock boot.img using adb.

rakeshbro said:
Yes, Flash the stock boot.img using adb.
Click to expand...
Click to collapse
I dont think i have the stock img

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rakeshbro said:
Yes, Flash the stock boot.img using adb.
Click to expand...
Click to collapse
How do i do it right

panda968 said:
View attachment 4460720
View attachment 4460721
How do i do it right
Click to expand...
Click to collapse
Copy boot.emmc.win to fastboot or adb directory then use this command!
Fastboot flash boot boot.emmc.win

Thanks that worked

panda968 said:
Thanks that worked
Click to expand...
Click to collapse
There's a button for that.

Related

I think I bricked my NS

I was flashing CM7. This is what I did:
Rooted, ClockworkMod v3.0.0.5 from Rom Manager.
From recovery did a BackUp (seems useless because it doesn't do anything.)
Wipe data/factory reset
Wipe Cache partition
Install zip from sdcard - selected cm7 - got a Status Error 7
Now the phone won't boot, stays on the Google screen, I can get into the recovery though.
Any ideas? I am downloading the Stock 2.3.3 image.
Thanks!
restore your backup.
irishrally said:
restore your backup.
Click to expand...
Click to collapse
I tried doing that from ClockworkMod, gave me an error, it was a ridiculously small file, doesn't seem like a backup.
Even the stock gives me a Status Error 7.
Any ideas?
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
shabbypenguin said:
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get. For both Stock 2.3.3 and CM7. I've tried multiple times.
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
shabbypenguin said:
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
Click to expand...
Click to collapse
I'm downloading it again. Should I rename it to update.zip? Odin, that's the software right?
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
crypticsorr0w said:
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
Click to expand...
Click to collapse
I was feeling so, either the ROM or the recovery. I'm just flashing the recovery, thanks for your help.
Also, how do I manually install ClockworkMod?
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
crypticsorr0w said:
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
Click to expand...
Click to collapse
It worked, I used fastoot and Terminal. Worked like a charm. Thanks again.

stuck in boot loop

hi everyone, while i was installing a rom, i think i messed and not i am stuck in a boot loop.
Now whenever i switch it on, it shows the logo then black screen then again logo and then again black screen ,,,
Now please help me =/
Flash stock rom through Odin and then flash custom rom again
Sent from my
you'll never know
Frikid said:
hi everyone, while i was installing a rom, i think i messed and not i am stuck in a boot loop.
Now whenever i switch it on, it shows the logo then black screen then again logo and then again black screen ,,,
Now please help me =/
Click to expand...
Click to collapse
Enter cwm
Format everything except sdcwrd
Moynt everything
Wipe delvic and battery stats
Mount everything
Flash ur rom...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
=========HOLO-UBUNTU========theme
darkshadow246 said:
Flash stock rom through Odin and then flash custom rom again
Sent from my
you'll never know
Click to expand...
Click to collapse
sanny5 said:
Enter cwm
Format everything except sdcwrd
Moynt everything
Wipe delvic and battery stats
Mount everything
Flash ur rom...
Click to expand...
Click to collapse
i tried this but it is still stuck in the boot loop, i guess i should stick with the stock rom for now.
I tried flashing the stock rom but it didn't work. i think i need to flash it through odin , can anyone link me to its tutorial ?
Frikid said:
i tried this but it is still stuck in the boot loop, i guess i should stick with the stock rom for now.
I tried flashing the stock rom but it didn't work. i think i need to flash it through odin , can anyone link me to its tutorial ?
Click to expand...
Click to collapse
I think you are using nemesis rom.
Dont use that rom its going to break it
Sent from my Titan TV S320 using xda premium
Flash The Stock ROM via ODIN
download here
http://forum.xda-developers.com/showpost.php?p=21846620&postcount=1
search rom by region.
Project Young said:
I think you are using nemesis rom.
Dont use that rom its going to break it
Sent from my Titan TV S320 using xda premium
Click to expand...
Click to collapse
Hey hey hey.!!! It can happen to anyone .. Its nt neccasory that he used nemesis or nemesis is the only rom that can brick ur phone..
Jst by editing build.prop can also brick ur phone..
He is a dev too.. Respect him nd his works ..
** rooting is new for me,
nd i am a noob to root....**
Frikid said:
i tried this but it is still stuck in the boot loop, i guess i should stick with the stock rom for now.
I tried flashing the stock rom but it didn't work. i think i need to flash it through odin , can anyone link me to its tutorial ?
Click to expand...
Click to collapse
Use the ODIN way so as long you can go to DownLoad mode then you are fine.
Use ODIN and find a ROM (FW) which you can extract it's packages i.e.
Place the CSC package in the CSC folder...Modem in the Phone folder and PDA in the PDA folder...........Under ODIN leave everything as default and flash it............Have a copy of this FW which is meant for Universal, perhaps I may upload a copy here later :laugh:

Little Help needed to get my 6p alive again

please help me.
I have completely wiped my device. nothing is there in internal storage. Just the TWRP folder.
it has unlocked bootloader and twrp installed
but it is the unrooted device.
so please tell me what is best for me?
shall I root it or can I directly go to stock Oero?
I have already downloaded stock file '8.1.0 (OPM6.171019.030.E1, Jul 2018)- angler-opm6.171019.030.e1-factory-1abcb2f1.zip'
I am confused, how should I proceed?
please explain me stepwise, so I can save my phone.
smartpreet said:
please help me.
I have completely wiped my device. nothing is there in internal storage. Just the TWRP folder.
it has unlocked bootloader and twrp installed
but it is the unrooted device.
so please tell me what is best for me?
shall I root it or can I directly go to stock Oero?
I have already downloaded stock file '8.1.0 (OPM6.171019.030.E1, Jul 2018)- angler-opm6.171019.030.e1-factory-1abcb2f1.zip'
I am confused, how should I proceed?
please explain me stepwise, so I can save my phone.
Click to expand...
Click to collapse
You will be fine I wipe my internal from time to time. Just make sure you update your bootloader and vendor. If you use the flash all I'm pretty sure it's done for you but if using fastboot method follow the steps in the hiesenberg guide. Just so you know once on the latest Oreo builds from what I've read can no longer downgrade. I haven't verified or read up on it myself but maybe look into if you think you might want to go back to nougat .
Exodusche said:
You will be fine I wipe my internal from time to time. Just make sure you update your bootloader and vendor. If you use the flash all I'm pretty sure it's done for you but if using fastboot method follow the steps in the hiesenberg guide. Just so you know once on the latest Oreo builds from what I've read can no longer downgrade. I haven't verified or read up on it myself but maybe look into if you think you might want to go back to nougat .
Click to expand...
Click to collapse
i have tried that earlier, but still i got the red triangle.
since i failed to go to stock today i installed latest twrp-3.2.2-0-angler using latest SDK tool.
then i flashed Magisk-v16.0 and then ResurrectionRemix-M-v5.7.4-20161008-angler and it immediately went to google logo and stuck there.
just use this to get back to stock https://developers.google.com/android/images
all you do is boot in to fast boot plug into pc and run flash all
there are ways to save data but you already wiped so no need
if your still confused just look up a guide of how to flash factory images and install the usb drivers
billycar11 said:
just use this to get back to stock https://developers.google.com/android/images
all you do is boot in to fast boot plug into pc and run flash all
there are ways to save data but you already wiped so no need
if your still confused just look up a guide of how to flash factory images and install the usb drivers
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
these are my files.
as you said i I had connected the phone and double-click the flashall
the process started and finish but still i am on google logo.it keeps booting to logo. nothing else is happening
smartpreet said:
these are my files.
as you said i I had connected the phone and double-click the flashall
the process started and finish but still i am on google logo.it keeps booting to logo. nothing else is happening
Click to expand...
Click to collapse
What did the command line windows say when it was flashing
billycar11 said:
What did the command line windows say when it was flashing
Click to expand...
Click to collapse
smartpreet said:
Click to expand...
Click to collapse
It looks good but didn't seem to flash radio and bootloader maybe just not in screen shot should boot but if it still won't boot in to the stock recovery and factory reset might help
You could have the bad big cores try flashing one of the 4 core fixes. Also I wait to flash magisk until after first boot. It can hang you on the Google screen .

Help please maybe my phone bricked or dead

Help please i just brick my phone after try to flash twrp .
i had a global rom miui 11. now the phone is empty no rom or system at all ):
i can get to fastboot mode. or twrp. i try to use mi flash ro mi flash pro to flash firmware back, but its failed.
have No OS at all all deleted ///
when i turn on the phone i can see the MI logo and after that it jump to fastboot .
i hopeless .... ):
thank for help !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what's your Problem? You got twrp working? Just flash any (custom) Rom from there
I second what he said format your data, and internal storage so it's clean. Than download latest stable MIUI from here. https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
After that click install wait and it should be all fine. Luckily you didn't get a fastboot loop that was an annoying one to figure out first time. Good luck
xytkhi said:
Help please i just brick my phone after try to flash twrp .
i had a global rom miui 11. now the phone is empty no rom or system at all ):
i can get to fastboot mode. or twrp. i try to use mi flash ro mi flash pro to flash firmware back, but its failed.
have No OS at all all deleted ///
when i turn on the phone i can see the MI logo and after that it jump to fastboot .
i hopeless .... ):
thank for help !
Click to expand...
Click to collapse
Hello bro, don't Panic if your boot loader is unlockled, and you can see fastboot and enter recovery mode you can save your phone, yesterday I was like this, I live in mexico and my light went off while i was flashing my 9T.
I followed this guide.
https://forum.xda-developers.com/k20-pro/how-to/xiaomi-mi9t-k20-hard-brick-recover-t4037591/page3
I didnt have to go to EDL mode, I just skipped that part and flashed my regular global room. instead the chinese one and my phone came back from graveyard. good luck.
Kireyev said:
I second what he said format your data, and internal storage so it's clean. Than download latest stable MIUI from here. https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
After that click install wait and it should be all fine. Luckily you didn't get a fastboot loop that was an annoying one to figure out first time. Good luck
Click to expand...
Click to collapse
hey sir I must say that I did it yesterday and it was great. what do say here, I did it end it's save my phone! thank you very much sir. :good:
xytkhi said:
hey sir I must say that I did it yesterday and it was great. what do say here, I did it end it's save my phone! thank you very much sir. :good:
Click to expand...
Click to collapse
glad it worked out

Question Help……Is there still warranty for brick the phone

This machine got bricked by me… Stuck at fast boot not turning on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Purchase, Root, Use, Brick, Contact For Support, Just in one day……
how did you brick it?
Just wait for the factory or full OTA image to unbrick
Qiyue_ said:
Purchase, Root, Use, Brick, Contact For Support, Just in one day……
Click to expand...
Click to collapse
I warn you to wait slowly with your root without test another things.
You are not brick, you must only reinstall rom, you can always access fastboot/Bootloader
Have you tried to access to Recovery ?
Me also bricked my nothing phone 1 but it's bootloader is locked
I have only access to fastboot
When i try to boot in recovery or system it's boot into fastboot
I was trying to install dynamic system update from developer option. While phone was installing dsu phone has turned off for rebooting and never turned on again.
How can i get full rom for nothing os and flash tool
Pho3nX said:
I warn you to wait slowly with your root without test another things.
You are not brick, you must only reinstall rom, you can always access fastboot/Bootloader
Have you tried to access to Recovery ?
Click to expand...
Click to collapse
I tried to use fastbootd for accessing system_b but after once I tried I can’t open this mode again, same as recovery.
Qiyue_ said:
I tried to use fastbootd for accessing system_b but after once I tried I can’t open this mode again, same as recovery.
Click to expand...
Click to collapse
And right now it’s just bootloader, the warn of the bootloader unlock sigh didn’t even come up
Displax said:
Just wait for the factory or full OTA image to unbrick
Click to expand...
Click to collapse
You also need the unbricking tool like MsmDownloadTool to flash full rom right? Having the rom file isn't enough.
Displax said:
Just wait for the factory or full OTA image to unbrick
Click to expand...
Click to collapse
Pheggas said:
You also need the unbricking tool like MsmDownloadTool to flash full rom right? Having the rom file isn't enough.
Click to expand...
Click to collapse
You will find the latest Full Nothing OS 1.1.0 HERE
@Displax , I don't know if MsmDownloadTools is operationnal for the Phone(1) because it mainly concerns all devices produced by the BBK Electronics consortium.
I don't know if someone want to try, you will find here the link to MsmDownloadTools

Categories

Resources