Hi everybody !
because of this problem,I want to reset my P9 lite,to see if it'll help.I wanted to reset from settings,but I have a question :
My p9 lite (VNS-L31 C432B380) has TWRP 3.1.1-1 and the official superSU.If i launch the reset process from settings,will it complete even if I have twrp as recovery,or will it be stuck in the middle (which means soft-brick,bootloop,or whatever :crying: ) ?
EinderJam said:
Hi everybody !
because of this problem,I want to reset my P9 lite,to see if it'll help.I wanted to reset from settings,but I have a question :
My p9 lite (VNS-L31 C432B380) has TWRP 3.1.1-1 and the official superSU.If i launch the reset process from settings,will it complete even if I have twrp as recovery,or will it be stuck in the middle (which means soft-brick,bootloop,or whatever :crying: ) ?
Click to expand...
Click to collapse
You can launch factory reset , no problem. You will lose SuperSu only. And data of course
Thanks ! Supersu is not a problem,I still have the zip I flashed when I rooted my phone.
For the data,hisuite should do the job for backup/restore.
Just to be sure, factory reset won't touch SD card,will it ?
EinderJam said:
Thanks ! Supersu is not a problem,I still have the zip I flashed when I rooted my phone.
For the data,hisuite should do the job for backup/restore.
Just to be sure, factory reset won't touch SD card,will it ?
Click to expand...
Click to collapse
No, but you can remove SD card from phone for sure , or you can unmount it in memory (storage) settings.
---------- Post added at 12:06 ---------- Previous post was at 12:03 ----------
EinderJam said:
Thanks ! Supersu is not a problem,I still have the zip I flashed when I rooted my phone.
For the data,hisuite should do the job for backup/restore.
Just to be sure, factory reset won't touch SD card,will it ?
Click to expand...
Click to collapse
Sorry
bozka1 said:
No, but you can remove SD card from phone for sure , or you can unmount it in memory (storage) settings.
---------- Post added at 12:06 ---------- Previous post was at 12:03 ----------
Sorry
Click to expand...
Click to collapse
Why sorry ?
EinderJam said:
Why sorry ?
Click to expand...
Click to collapse
Sorry for duplicate post .
Sorry,but I'll need your help again ^^
When I hit factory reset under advanced settings/backup and restore,the phone reboots to twrp.Then I reboot to system,and nothing have been deleted.I think I'll need the stock recovery of my build (B380),do you know how where can I find it ?
Edit: Ok,I downloaded the FullOTA-MF package from FF. FF says it's 1.601GB,it downloads a 1.25GB update.zip file and I end with a 2.51GB update.app file.
Using huawei update extractor,I have this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which recovery should I extract and flash ? both have the same size
EDIT: I flashed recovery.img (everything went fine). EMUI was asking me to update to B388 for ages,so I downloaded it (362Mo) and tried to install it.The phone rebooted to stock recovery (so I assume it's working) but failed to verify the update package (although it downloaded himself like 2min before).After reboot,it proposes the B388-FULL package in settings,can I install it or am I facing a problem ?
Related
hello, i just tried to flash cloudyg2 3.3 and i have bricked my d802 16gb. i had stock lp and had rooted and installed twrp did the wipes (no internal), got the right lp bootstack and used the right settings, so i really dont know what went wrong.
the symptom is that lg logo show for a fraction of a second and then a washed out gray on top of screen that fades away slowly. also while connected in pc it reads like many many drives.
on the bright side i can enter recovery/download modes. in my original attempt i used the bumbed sign, on my tries to fix it i also used the loki one, same deal.
seems like i have no recovery file, i thought i did it with one of the programs i installed, but since i am newbie seems like i misunderstood. so no recovery file
any help?
solution found:
1.Download the latest TWRP from blastagator here.
2.Flash it with your current recovery, reboot into that new recovery.
3.Download SRKG2 rom (by somboons) here.
4.This rom is a full stock rom with some debloat and custom camera. Wipe /system/ /cache/ /dalvik-cache/ /data/ and flash it (choose any options, it's not important since you'll be only installing this rom because it also upgrades other partitions to a lollipop supported version.
5.Boot into the rom and reboot into recovery again. (If you are unable to boot or the boot is taking too long like 10 minutes, shut down, go to recovery again and perform a factory reset, the one that makes you type 'yes' in the keyboard and you should be fine).
6.Download CloudyG2 3.1 and wipe /system/ /cache/ /dalvik-cache/ /data/ again.
7.Flash the rom choosing the correct version of your phone (among other preferences) in the aroma installer.
8.Boot and enjoy!
i cant post link of the solution cause i am new, but many thanks to him. i still dont understand what went wrong, but my hypothesis is that i shouldnt install the lp bootloader since i was in lp anyway.
i hope it helps anyone with similar problem.
cheers
you are in qhsusb bulk 9006 souse srktool to unbrick
---------- Post added at 07:22 AM ---------- Previous post was at 07:20 AM ----------
that becuase wrong bootleader u must use bump kk bootleader then reboot recovery and flash rom
Can not change lte to 3g can someone please...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D800 using Tapatalk
So, last night I was messing around with some custom roms, and tried installing CM, I accidentally installed CM recovery as the boot img, and tried to backup from my backup file that I created via TWRP.
Now, when restoring i get into a bootloop, i think, and if I'm trying to install a custom ROM i either get a status 7 error or it can mount /system. I tried going into the Mount tab in TWRP and checking the system check-box, but it won't let me.
Help XDA-kenobi, you're my only hope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ThaBlobFish said:
So, last night I was messing around with some custom roms, and tried installing CM, I accidentally installed CM recovery as the boot img, and tried to backup from my backup file that I created via TWRP.
Now, when restoring i get into a bootloop, i think, and if I'm trying to install a custom ROM i either get a status 7 error or it can mount /system. I tried going into the Mount tab in TWRP and checking the system check-box, but it won't let me.
Help XDA-kenobi, you're my only hope.
Click to expand...
Click to collapse
Flash a factory image and start fresh. And don't flash the wrong img to the wrong partition this time
... Device won't show up when i try to list it in CMD under fastboot devices... makes it knda hard to flash. Maybe I should just stop messing with this ****...
Disregard, I am apparently mentally challenged...
ThaBlobFish said:
... Device won't show up when i try to list it in CMD under fastboot devices... makes it knda hard to flash. Maybe I should just stop messing with this ****...
Disregard, I am apparently mentally challenged...
Click to expand...
Click to collapse
You did not mention that in earlier post. If you can't flash via recovery and can't use fastboot then you are screwed. Take this as an expensive lesson to always triple check what you are flashing.
---------- Post added at 02:04 PM ---------- Previous post was at 01:51 PM ----------
After thought. Have you tried flashing just a boot img from recovery?
XxMORPHEOUSxX said:
You did not mention that in earlier post. If you can't flash via recovery and can't use fastboot then you are screwed. Take this as an expensive lesson to always triple check what you are flashing.
---------- Post added at 02:04 PM ---------- Previous post was at 01:51 PM ----------
After thought. Have you tried flashing just a boot img from recovery?
Click to expand...
Click to collapse
I used an old directory with old files which I used to root my M7, that's why it didn't show up. It's all fixed now.
ThaBlobFish said:
I used an old directory with old files which I used to root my M7, that's why it didn't show up. It's all fixed now.
Click to expand...
Click to collapse
Oh, Good. Glad you figured it out!
Phone info: March Security Update (i dont know why i didn't update it until now lol)
So back then I successfully rooted my phone - and it works i do have root access and magisk is installed. But after a few months just like 4-5, i noticed that the magisk is not installed on my phone so I can't install magisk modules.
Here's my screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see from my screenshots, I do have root access but the thing is The magisk is not installed even though I've tried to root it again using patched_boot.img (MARCH UPDATE) - still not yet installed. I tried to install the magisk using that install buttom from magisk app itself but still didn't work. I don't know how it happened. I wasn't doing anything even though i am not uninstalling magisk - it's just disappears from my phone lol.
Any recommendation for my problem? I need your help guys and thank you for those who are going to answer my problem!
try to reflash again the magisk file via TWRP
Yamz18 said:
try to reflash again the magisk file via TWRP
Click to expand...
Click to collapse
Hi, read this , maybe it help you:
https://forum.xda-developers.com/xiaomi-redmi-4x/help/magisk-doesnt-pie-roms-t3848025
Yamz18 said:
try to reflash again the magisk file via TWRP
Click to expand...
Click to collapse
zkoz said:
Hi, read this , maybe it help you:
https://forum.xda-developers.com/xiaomi-redmi-4x/help/magisk-doesnt-pie-roms-t3848025
Click to expand...
Click to collapse
thank you guys! My problem has been solved through installing magisk via TWRP. I installed the old version of magisk and it didn't work. It needs to install the latest version of Magisk. thank you again for helping me!
Jinzuken said:
thank you guys! My problem has been solved through installing magisk via TWRP. I installed the old version of magisk and it didn't work. It needs to install the latest version of Magisk. thank you again for helping me!
Click to expand...
Click to collapse
Your Welcome Man
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well the procedure is the same of MIUI rom, the difference is that i have builded first the rom and after converted it into a Treble AB Image.
1) Flash the firmware .48 Pie, unlock the BL and flash the Pitch Black Recovery
2) Assure that in recovery is unchecked the option "Disable DM Verity", format and wipe data, dalvik and cache and flash this force decryption - DO NOT WIPE SYSTEM OR VENDOR!
3) In the follow order flash first this boot patched for .48, then this system image and after latest Magisk.zip
4) Resize the system partition in the wipe advanced menu and reboot in system. These steps to follow are very important. You will take a bootloop but don't worry!
5) Return in recovery, flash the Permissiver V4 by ErfanAbdi and after reboot in system. New bootloop. Now return again in recovery and use the follow patch. Insert this file (by pitch black file manager) into system/system/etc/permissions (if you don't find this specific path means that don't have followed the steps correctly!) and give to it chmod 755
6) Now, at the next reboot, the rom should boot. Don't flash any zip of gapps, otherwise you will take a new bootloop.
I have realized this rom with ashusharma's trees modified by me and using the latest kernel asus .48 always patched by me, you can build other roms using these sources but remember always to convert the ROM into AB Treble Image with ErfanGSITool and apply the patches for bootloop.
That's all!!!
BUGS
Installation of Gapps or set of any security pattern lock create bootloop at reboot
Great bro, i try
wait i m having issues now....wait that finish to test and update the correct procedure
Ok issues resolved. Follow the guide step by step
fosseperme said:
Ok issues resolved. Follow the guide step by step
Click to expand...
Click to collapse
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error
Eolvand said:
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error
Click to expand...
Click to collapse
MTP works...you must select the mode usb in developer option
Please make it official
Link is not working
Hi,
Using a Note3 LTE version. 9005. Tried to update with TWRP ver 2.8.7. Did not work. Tried to flash 3.3.0 TWRP image, now phone only goes in these two modes after removing the SD card:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and this
The flash was on the SD card. Card removed now. Any ideas how to fix this?
Can you perform fastboot commands?
Wait just flash a rom with odin then go back into bootloader and flash twrp.
Keno_I said:
Can you perform fastboot commands?
Click to expand...
Click to collapse
no idea. How to do that?
Keno_I said:
Wait just flash a rom with odin then go back into bootloader and flash twrp.
Click to expand...
Click to collapse
How to do that? I'm guessing this is the way. Its been a very long time since I flashed a phone.
This should be new enough.
mystvearn said:
no idea. How to do that?
How to do that? I'm guessing this is the way. Its been a very long time since I flashed a phone.
Click to expand...
Click to collapse
Use this for help
[GUIDE][HOW TO FLASH LOLLIPOP | SM-N9005][5.0 | N9005XXUGBNL8][Easy]
Confused on how to install Android 5.0 Lollipop? Fear not. This guide have you covered :D So to start this. We need some things. Odin Lollipop Leak A Backup of your PIT File incase something goes wrong and lastly a Samsung Galaxy Note 3 THIS...
forum.xda-developers.com
Keno_I said:
Use this for help
[GUIDE][HOW TO FLASH LOLLIPOP | SM-N9005][5.0 | N9005XXUGBNL8][Easy]
Confused on how to install Android 5.0 Lollipop? Fear not. This guide have you covered :D So to start this. We need some things. Odin Lollipop Leak A Backup of your PIT File incase something goes wrong and lastly a Samsung Galaxy Note 3 THIS...
forum.xda-developers.com
Click to expand...
Click to collapse
Got it working again. Now to start installing lineageOS again
mystvearn said:
Got it working again. Now to start installing lineageOS again
Click to expand...
Click to collapse
Great news! Goodluck with your phone
please mark best answer if my answer helped.
Keno_I said:
Great news! Goodluck with your phone
please mark best answer if my answer helped.
Click to expand...
Click to collapse
How do I mark the best answer?
I've installed the LOS, got it working but no gapp apps. So tried to flash TWRP again, but it always boots to the LOS 18 recovery and not TWRP. Now going back to Note3 stock. There must be something I'm doing wrong somewhere.
mystvearn said:
How do I mark the best answer?
I've installed the LOS, got it working but no gapp apps. So tried to flash TWRP again, but it always boots to the LOS 18 recovery and not TWRP. Now going back to Note3 stock. There must be something I'm doing wrong somewhere.
Click to expand...
Click to collapse
Before you flash the recovery, untick the Auto Reboot option in ODIN. Then flash the recovery. After flashing in done, reboot your device directly to recovery mode from download mode by pressing Vol up + Power + Home button together. Now you will see the TWRP recovery is booted in your device. Now you can reboot normally and your TWRP will be installed.