So I wanted to try out a new ROM and flash was successful, but went into a endless bootlogo and wanted to try another one, so I formatted the drive and wanted to do another one. Instead it somehow formatted my whole phone including the SD card. Fastbooter not working and I cannot see the phone on the USB anymore. Also the phone has no recovery and no OS now. So it keeps going into Huawei Erecovery and trying to grab a package but fails all the time.
Is there something I can do to restore it to factory? With just the factory OS and recovery?
Thanks in advance
After using dload my phone is kinda back to normal.
But everytime I turn it on, it says it couldn't verify and I need to press the power button to make it boot into the OS
when I had thid problem ,I solved it by this way : using Firmware Finder, I update with a full rom ( not just ota, update around 1.6 or 1.8 Go ) and thats all : )
I, bricked py p9 lite Vns l31 c432b171 , dload method isnt working and i am now stuck in bootloop pls help!
my TWRP is working as are adb commands
DL stock rom 171, extract images and flash them by fastboot ? ,there is so many tuto here.
You can try to download the FullOTA-MF-PV from here L31c432&firmware and try with dlod again . Or as sonneper says try to install each part with fastboot
ok now is for your model
sonneper said:
DL stock rom 171, extract images and flash them by fastboot ? ,there is so many tuto here.
Click to expand...
Click to collapse
whenever i try flashing the system image i get this error:
FAILED (remote: sparse flash write failure)
is your bootloader locked or unlocked ?even it's show like locked, try to unlock it again
---------- Post added at 20:57 ---------- Previous post was at 20:55 ----------
lost3 said:
You can try to download the FullOTA-MF-PV from here L21c432&firmware and try with dlod again . Or as sonneper says try to install each part with fastboot
Click to expand...
Click to collapse
He was not talking about L31 ?
lost3 said:
You can try to download the FullOTA-MF-PV from here L21c432&firmware and try with dlod again . Or as sonneper says try to install each part with fastboot
Click to expand...
Click to collapse
i have vns l31
install firmware finder huawei on your pc, you'll able to download all firmware you want
i have vns l31
Click to expand...
Click to collapse
Write in the search box yoyr model e.x. l31c432 , if there is a FullOTA-MF-PV rom download that and try to install it with dload.
Στάλθηκε από το HUAWEI VNS-L21 μου χρησιμοποιώντας Tapatalk
sonneper said:
DL stock rom 171, extract images and flash them by fastboot ? ,there is so many tuto here.
Click to expand...
Click to collapse
Ok i flashed the system , boot and cust image but my phone boots into huawei eRecovery
your phone is not plug on your pc ? in erecovery, can you wipe all data ? that's what I did on mine , I had try many restart trying different buttons combo until I can wipe all data, hop, it was fine after.
When I did it, it was with B130, maybe you can try...
sonneper said:
your phone is not plug on your pc ? in erecovery, can you wipe all data ? that's what I did on mine , I had try many restart trying different buttons combo until I can wipe all data, hop, it was fine after.
Click to expand...
Click to collapse
cant wipe data in erecovery
try to update by wifi, if it's failed maybe you'll have option to reset factory
---------- Post added at 21:42 ---------- Previous post was at 21:35 ----------
do you have the unlock code for your bootoader ?
sonneper said:
try to update by wifi, if it's failed maybe you'll have option to reset factory
---------- Post added at 21:42 ---------- Previous post was at 21:35 ----------
do you have the unlock code for your bootoader ?
Click to expand...
Click to collapse
yes
Exiatron00 said:
cant wipe data in erecovery
Click to expand...
Click to collapse
Try to wipe it with fastboot or from twrp, that orks with me
Στάλθηκε από το HUAWEI VNS-L21 μου χρησιμοποιώντας Tapatalk
should i wipe or format data?
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
just wiped data in twrp, still just boot into eRecovery
Here ROM STOCK NOUGAT FLASHEABLES you can find roms that can be installed from twrp, you may try it.
If that not works you may try Italian Knife or try Huawei Multi-Tool 8 to unbrick your phone.
Related
Im doing some rootings and the last time I unlock my bootloader. The phone begins not to turn on. It stuck normally like bootloop but cannot see charging screen,hard reset cant access,only fastboot mode. I REPEAT HARD RESET CANNOT ACCESS. Please immediate reply. Ty
DragonVin97 said:
Im doing some rootings and the last time I unlock my bootloader. The phone begins not to turn on. It stuck normally like bootloop but cannot see charging screen,hard reset cant access,only fastboot mode. I REPEAT HARD RESET CANNOT ACCESS. Please immediate reply. Ty
Click to expand...
Click to collapse
You need to flash whole firmware using fastboot.
Flash
System.img
Recovery.img
Boot.img
Cust.img
Suleiman01 said:
You need to flash whole firmware using fastboot.
Flash
System.img
Recovery.img
Boot.img
Cust.img
Click to expand...
Click to collapse
Where do i get those 4 img, and thanks for the advise
DragonVin97 said:
Where do i get those 4 img, and thanks for the advise
Click to expand...
Click to collapse
You can extract them from official firmware using Huawei update extractor.
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
Suleiman01 said:
You can extract them from official firmware using Huawei update extractor.
Click to expand...
Click to collapse
Huawei update extractor link
https://goo.gl/aSMU9M
Is still not working. Am i gonna bring it to service or what. I checked many method but non cant actually fix this.
you have to put your original firmware with the dload folder in to root of your sd card with another phone or sd card adapter. then put that sd card to your p8 lite. then hold both volume keys with power button and when the huawei logo pops up count to 12 seconds and then release power key and hold both volume keys until it starts restoring
Hi
After successfully unlock bootloader i am not able to root Honor 8 Lite PRA-LA1 Android 7.0 with xposed tools because in recovery mod there is no option for install zip files.
How i can root .?
I wonder the same
I tried "adb reboot bootloader", but when tried "fastboot oem unlock", I got "failed, password wrong".
I unlocked bootloader http://emui.huawei.com/en/plugin/hwdownload/download and Open road to root....
However is not sense, because will deleted all you stock apps (include keyboard), include Google app and Google Play. For this model NOT PRESENT AND probably WILL NO any stock firmware or recovery! Will every boot "Unlocked and not thrusted", and if try flash this recovery (https://twrp.me/devices/huaweihonor8.html), you got soft-brick (will available bootloader).
If you tried, probably you have no any chance....
Type "fastboot oem relock" with gotten early password, but you anyways will have no Google Play and keyboard.... For full worked firmware you anyways have no chances.
And... RIP finally, not possible even to bootloader.
I waiting when battery fully lost of charge.... Probably will chance to enter to bootloader.
I partially restored firmware...
can anybody give me huawei honor pra-la1 firmware its stuck on logo just go fastboot mode but bootloader locked there any sulation??????
sajidalilatif1989 said:
can anybody give me huawei honor pra-la1 firmware its stuck on logo just go fastboot mode but bootloader locked there any sulation??????
Click to expand...
Click to collapse
Please let's talk about this in your thread.
acterhd said:
I partially restored firmware...
Click to expand...
Click to collapse
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.
kfatah22 said:
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.
Click to expand...
Click to collapse
flash the whole firmware via dload method
kfatah22 said:
Can you please let me know how you did it ... I ****ed it up !! (((((((
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
Guys I have ruined my phone, can someone help please, I installed TWERP, then rooted my phone, had the stock rom with no google apps and no keyboard, tried another factory reset now phone boot into a blackscreen with navigation keys and I can not do anthing ... it is a new phone, please help.
Click to expand...
Click to collapse
Download whole firmware and force upgrade via dload.
My phone model is VNS-L31C16B120 and I flashed it with a rom that was meant for the VNS-L31C16B361.
I have absolutely no access and Fastboot and Huawei eRcovery doesn't support my phone now..
if I flash my dev and factory reset the phone, will the build number change back to normal and will I be able to use eRecovery?
AADeaney said:
My phone model is VNS-L31C16B120 and I flashed it with a rom that was meant for the VNS-L31C16B361.
I have absolutely no access and Fastboot and Huawei eRcovery doesn't support my phone now..
if I flash my dev and factory reset the phone, will the build number change back to normal and will I be able to use eRecovery?
Click to expand...
Click to collapse
From what I understand you can't boot your phone?
dariomrk said:
From what I understand you can't boot your phone?
Click to expand...
Click to collapse
It boots up until the phone setup screen, but it doesn't go past that, it just starts over and over again..
please help..
dariomrk said:
From what I understand you can't boot your phone?
Click to expand...
Click to collapse
From what I've read so far, my device is softbricked.
It boots up until the Emui set up screen..
I just don't know how to fix it..
you can't use dload?
dariomrk said:
you can't use dload?
Click to expand...
Click to collapse
I tried using dload, but it doesn't work.
I think it's partly because I can't find the original firmware for my phone.
You can enter fastboot?
dariomrk said:
You can enter fastboot?
Click to expand...
Click to collapse
I can enter fastboot, but it says that my device ins't supported on hisuit
AADeaney said:
I can enter fastboot, but it says that my device ins't supported on hisuit
Click to expand...
Click to collapse
Ok, great. That means Fastboot is working, noone cares about HiSuite. I will write you what to do. Untill then wait.
dariomrk said:
Ok, great. That means Fastboot is working, noone cares about HiSuite. I will write you what to do. Untill then wait.
Click to expand...
Click to collapse
Thank you soooooooo much.. I'll wait patiently for your instructions.
use the revert guide to mm
AADeaney said:
Thank you soooooooo much.. I'll wait patiently for your instructions.
Click to expand...
Click to collapse
So:
Extract oeminfo.img from this C432 SINGLE SIM OEMINFO and flash it uding fastboot:
Code:
fastboot flash oeminfo oeminfo.img
Untill then get your 4Gb sdcard ready and extract this UPDATE.APP to the dload folder on sdcad.
After OEMInfo flash is done, Don't boot your phone. Insert sdcard with the /dload/UPDATE.APP on it and press all three buttons at the same time (keep your charger cable out).
Then when that's done you will have your bootloader relocked and stock recovery restored.
Then delete that UPDATE.APP from the sdcard and extract this update app,
C432B161 and just like the last time insert sdcard and press all three buttons.
You should end up with europe single sim firmware, ready to be updated to nougat.
---------- Post added at 05:58 PM ---------- Previous post was at 05:53 PM ----------
I kind of butchered this guide but you'll understand it hopefully
Hey. sorry to bother you.
dariomrk said:
Ok, great. That means Fastboot is working, noone cares about HiSuite. I will write you what to do. Untill then wait.
Click to expand...
Click to collapse
I found the the stock rom for my device.
Will it work without problems if I use dload?
AADeaney said:
I found the the stock rom for my device.
Will it work without problems if I use dload?
Click to expand...
Click to collapse
It should.
Also after doing the dload reflash, reboot to the stock recovery (vol+ & power) and factory reset.
Hello hope someone can help please have been trawling forums for a week now without getting anywhere.
I was running nxt-l29c636???? tried to upgrade via app firmware finder, first two I picked just failed then I picked older one thinking I might need to go from android 6 to 7 then to 8
Now it's stuck in a loop.
The firmware I picked looked like it was installing but failed early on 1 or 2 %
I can get to erecovery - does nothing and I've tried copying update.app to SD card and holding three button method but it does nothing.
When I fastboot it and rescue mode my phone status is locked.
Anyone know how I can recover please?
Ideally just want to flash it and if so it'd be great if it was android 8
Thanks for looking
can you extract update.app using huawei update extractor then flash all images found in the update ?
M.abdo said:
can you extract update.app using huawei update extractor then flash all images found in the update ?
Click to expand...
Click to collapse
first of all thanks for replying.
not sure what you mean though, if I DO extract update.app how could I flash?
Although I work in IT I'm a real noob when it comes to this
search for huawei update extractor then extract the img files found in the update.app and flash using fastboot
---------- Post added at 09:50 PM ---------- Previous post was at 09:50 PM ----------
try to flash both ramdisk and system img
M.abdo said:
search for huawei update extractor then extract the img files found in the update.app and flash using fastboot
---------- Post added at 09:50 PM ---------- Previous post was at 09:50 PM ----------
try to flash both ramdisk and system img
Click to expand...
Click to collapse
many thanks, is there a guide to using fastboot. I mention that when I fast boot the phone claims it's locked.
Which tools do I use to flash using fastboot please?
you can search on how to flash using fastboot method but i don't know if it require to unlock your bootloader first or not
M.abdo said:
you can search on how to flash using fastboot method but i don't know if it require to unlock your bootloader first or not
Click to expand...
Click to collapse
ok many thanks
BlackCat1969 said:
ok many thanks
Click to expand...
Click to collapse
ok so I've been looking all night on internet and trying various things but it seems as my phone is locked I can't use fastboot or adb (it gives command not allowed with fast boot)
but does at least communicate with (fastboot devices)
does this mean I need to root my phone first?
How do I do this please?
unfortunatly huawei no longer support to unlock the bootloader and there is no free method to do this
there is other methods to restore your device and unlock your bootloader but it will cost you money you can try somthing like dc unlocker or you can go to the repair centers
M.abdo said:
unfortunatly huawei no longer support to unlock the bootloader and there is no free method to do this
there is other methods to restore your device and unlock your bootloader but it will cost you money you can try somthing like dc unlocker or you can go to the repair centers
Click to expand...
Click to collapse
ok so I bought DC Phoenix which is a great program and done online chat too which was very helpful and managed to flash a stock ROM. BUT when it wanted step 2 (the phone to be put in upgrade mode) wasn't sure it was going to do this for me or it wanted me to do this, but either way I cannot get the phone into upgrade mode by holding the volume up and volume down key + power
it just power cycles or keep the huawei logo on the screen and eventually gives options like factory default and wipe cache etc.
Decided to flash it in advanced mode with DC phoenix and it claims successful and doesn't ask for upgrade mode but now booting the phone gives#
Your device has failed verification and may not work properly
(1) Press power key to continue - tried and just reboots to the same
(2) Press Volume Up key up to 3 seconds to enter recovery to restore your device - does nothing
(3) Your device will stop start if there is no operation
Can still boot into Fastboot mode
I'm stuck, anyone can offer help please?
My phone is Asia firmware NXT-L29C636 so I've used stock that claims to be for that region. but I see if DC Phoenix log a mention of Build number: NXT-C900B170
Model: HUAWEI NXT-L29
Is that what DC Phoenix is detecting that's it just now?
hi all gsm lovers
i have a RNE-L21
this is info log by fastboot:
fastboot oem get-product-model:
RNE
fastboot oem get-build-number:
System 8.0.0.046(0XWY)
what i should do for unbrick ?
boot loader is unlocked
i can boot it fastboot
update:
in twrp my touch not working
dark_boy99 said:
hi all gsm lovers
i have a RNE-L21
this is info log by fastboot:
fastboot oem get-product-model:
RNE
fastboot oem get-build-number:
System 8.0.0.046(0XWY)
what i should do for unbrick ?
boot loader is unlocked
i can boot it fastboot
Click to expand...
Click to collapse
You have flashed a wrong firmware so your device didnt find all needed files.
Try this TWRP and let me know please. Use command
fastboot flash recovery_ramdisk TWRP-oreo-smart.img
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
Have you Dual SIM / Single SIM? What is your region? ( Cxxx).
-Alf- said:
You have flashed a wrong firmware so your device didnt find all needed files.
Try this TWRP and let me know please. Use command
fastboot flash recovery_ramdisk TWRP-oreo-smart.img
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
Have you Dual SIM / Single SIM? What is your region? ( Cxxx).
Click to expand...
Click to collapse
hi dear
thanks for replay
this phone have 2 slot sim
i dont know cust version
this twrp is installed and working :
https://forum.xda-developers.com/hu...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
but rom of this page is not installed i get error:
failed mount system and product
in phone case model is:
rne-l21
but mainboard of phone is replaced ago
now i dont know about correct model
any way to unbrick this?
update:
now im in:
rne-l21 8.0.0.0 (C185B302log)
i have bootloop problem
phone boot in erecovery
and download package failed
i must relock bootloader?
dark_boy99 said:
update:
now im in:
rne-l21 8.0.0.0 (C185B302log)
i have bootloop problem
phone boot in erecovery
and download package failed
i must relock bootloader?
Click to expand...
Click to collapse
you cannot relock bootloader in this state of the system, it will brick the phone.
It seems that you have installed full_data only, idk why...
Are you sure about C185? If not, flash Morfuz ROM again , read the instructions carefully bro.
-Alf- said:
you cannot relock bootloader in this state of the system, it will brick the phone.
It seems that you have installed full_data only, idk why...
Are you sure about C185? If not, flash Morfuz ROM again , read the instructions carefully bro.
Click to expand...
Click to collapse
hi brother
thanks for replay
morfuz rom not installed for reason :
system and vendor cant mount
i try with this method
https://forum.xda-developers.com/hu...ompilation-firmware-flash-emui-8-0-0-t3784079
dark_boy99 said:
hi brother
thanks for replay
morfuz rom not installed for reason :
system and vendor cant mount
Click to expand...
Click to collapse
- Try to update phone via eRecovery , using option "Download latest... and recovery" (you need a Wi-Fi connection)
- Try another Custom ROM (you need working OS on your phone)
- Try it with TWRP linked in my post
- You can try also rebrand your phone e.g. to C432 , you have to change oemino.img via TWRP and flash Service ROM for C432 using dload method .
-Alf- said:
- Try to update phone via eRecovery , using option "Download latest... and recovery" (you need a Wi-Fi connection)
- Try another Custom ROM (you need working OS on your phone)
- Try it with TWRP linked in my post
- You can try also rebrand your phone e.g. to C432 , you have to change oemino.img via TWRP and flash Service ROM for C432 using dload method .
Click to expand...
Click to collapse
erecovery says failed to getting package info
another Custom need working os and i no have os working fine
murfuz rom say:
failed to mount /dev/block/mmcblkOp51 at /system:invalid argument
failed to mount /dev/block/mmcblkop54 at /vendor :invalid argument
-Alf- said:
- Try to update phone via eRecovery , using option "Download latest... and recovery" (you need a Wi-Fi connection)
- Try another Custom ROM (you need working OS on your phone)
- Try it with TWRP linked in my post
- You can try also rebrand your phone e.g. to C432 , you have to change oemino.img via TWRP and flash Service ROM for C432 using dload method .
Click to expand...
Click to collapse
brother are you have tested oeminfo img?
dark_boy99 said:
tested oeminfo img?
Click to expand...
Click to collapse
What do you mean by that??
-Alf- said:
What do you mean by that??
Click to expand...
Click to collapse
link of oeminfo.img for re brand
can i tested this rom?
https://openkirin.net/download/
dark_boy99 said:
link of oeminfo.img for re brand
Click to expand...
Click to collapse
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Note: this is flashable .zip file, simply flash it from TWRP as .zip .
---------- Post added at 14:21 ---------- Previous post was at 14:15 ----------
dark_boy99 said:
can i tested this rom?
https://openkirin.net/download/
Click to expand...
Click to collapse
Yes, you can, EMUI 8-based Builds. Keep in mind, that Openkirin ROM can be installed from fastboot only, don't try install it with TWRP.
-Alf- said:
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Note: this is flashable .zip file, simply flash it from TWRP as .zip .
---------- Post added at 14:21 ---------- Previous post was at 14:15 ----------
Yes, you can, EMUI 8-based Builds. Keep in mind, that Openkirin ROM can be installed from fastboot only, don't try install it with TWRP.
Click to expand...
Click to collapse
i will try openkirin thanks
i try openkirin
but bootloop problem
data and cache failed to wipe
in fastboot
phone unlocked
frp lock
-Alf- said:
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Note: this is flashable .zip file, simply flash it from TWRP as .zip .
---------- Post added at 14:21 ---------- Previous post was at 14:15 ----------
Yes, you can, EMUI 8-based Builds. Keep in mind, that Openkirin ROM can be installed from fastboot only, don't try install it with TWRP.
Click to expand...
Click to collapse
after write oem info what i should do?