Related
Is there any separate supersu versions for moto x play marshmallow i tried the supersu beta 2.52 And 2.56 but the phone is stuck in bootloop need help to root marshmallow moto x play
you need supersu 2.62
Worked perfect
That worked perfect mate thanks for the quick reply cheers :good::good:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
iZak17 said:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
Click to expand...
Click to collapse
I Use TWRP 2.7.8v2 when you prompted to install TWRP SuperSU not install and reboot
2.62 SuperSU the latest I think there are two
2.61 and 2.62 are working. Not clear with 2.60
Versions before 2.52 doesn't work
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Sounds like you installed a version prior to 2.61. You can transfer it to your phone when in TWRP. Try flashing it and rebooting, if that doesn't work you'll have to do a full restore from your backup and reboot, then flash Supersu 2.62.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Install firmware and use supersu 2.62
Enviado desde mi XT1563 mediante Tapatalk
flopezm said:
i use twrp 2.7.8v2 when you prompted to install twrp supersu not install and reboot
2.62 supersu the latest i think there are two
Click to expand...
Click to collapse
did u find the reason ???
flopezm said:
Install firmware and use supersu 2.62
Click to expand...
Click to collapse
Could you elaborate on this? Install which firmware?
Dekztyr said:
Could you elaborate on this? Install which firmware?
Click to expand...
Click to collapse
flash the twrp flashable stock 6.0 and then flash su.62
bablu048 said:
twrp flashable stock 6.0
Click to expand...
Click to collapse
Great, thanks! Any idea where I might find that?
Dekztyr said:
Great, thanks! Any idea where I might find that?
Click to expand...
Click to collapse
Here forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
Just search in the General section you'll be amazed by what you can find.
Is there a working version for 6.0.1? I've been trying to root for hours and nothing. Every time I install SuperSU (I've tried 2.65 and 2.74) it will softbrick my phone, making it stuck at the bootloader warning message, forcing me to flash install stock rom and go through the fresh install every time.
Any one plz help me .i have installed Twrp 3.0.2 and after installing supersu 2.65 i have lost my base band data .i have installed the stock rom and tried to install supersu 2.62 and 2.46 but no use again i have lost my base band data.plzz help me to root my device with out losing base band data??
After reading some threads someone said you can install and use all the latest su versions by installing it systemless. You must open the terminal command in twrp recovery and type this:
echo "SYSTEMLESS=true" >> /data/.supersu
After this you should be able to flash all newest/latest versions.
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
kos25k said:
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
Click to expand...
Click to collapse
Im now running su 2.71 after installing it systemless. Before I tried this my ROM stucked in a bootloop.
so with 2.71 is ok?
mmmm I read some weird things such as loose root when f.reset http://m.supersuroot.com/
after updating yureka cm12.1 to YOG4PAS8A4 then i am not able to flash xposed framework
it gives write error no space left on system and their is so much space is left in system. please help
Check ur sys version and download framework zip according to that and flash it and install it from xposed installer alpha apk
As u r saying if u have updated to new version like from kk to lp or lp to mm or some minor ver in that
Sent from my YU5010 using XDA Free mobile app
Check xposde zip versions
Hey I have rooted yureka plus, flashed closed zip file successfully, then when I pressed reboot system it got stuck on bootloop,help plz on how to flash it without bricking.
[email protected] said:
Hey I have rooted yureka plus, flashed closed zip file successfully, then when I pressed reboot system it got stuck on bootloop,help plz on how to flash it without bricking.
Click to expand...
Click to collapse
Can you please tell which version (SDK and platform) of Xposed you've flashed and also SuperSU version?
Thanks for the reply. i really need it to use jio sim on my yureka plus
saurav007 said:
Can you please tell which version (SDK and platform) of Xposed you've flashed and also SuperSU version?
Click to expand...
Click to collapse
xposed-sdk-arm64-20150514.zip. superSU v.2.46.zip
[email protected] said:
xposed-sdk-arm64-20150514.zip. superSU v.2.46.zip
Click to expand...
Click to collapse
You have to update both, SuperSU and Xposed.
Download latest SuperSU.zip and flash from TWRP recovery and after that flash Xposed.
Download latest Xposed from here:
http://dl-xda.xposed.info/framework/
Thanks for the reply saurav007
Supersu updated
But when I tried to flash xposed v86 sdk22-arm64.zip it failed.plz tell me the version of xposed .thanks
I have
Device model- YU5510
CYANOGEN OS-YOG4PAS8A4
Security patch lvl -2016-05-01
[email protected] said:
Supersu updated
But when I tried to flash xposed v86 sdk22-arm64.zip it failed.plz tell me the version of xposed .thanks
I have
Device model- YU5510
CYANOGEN OS-YOG4PAS8A4
Security patch lvl -2016-05-01
Click to expand...
Click to collapse
Can you elaborate more about the error?
Normally it gives 'no space left' error in YOG4PAS8A4 build. For this you have to uninstall some system apps like Chrome, YouTube and other, after that you can flash Xposed.
Thanks for the reply.
saurav007 said:
Can you elaborate more about the error?
Normally it gives 'no space left' error in YOG4PAS8A4 build. For this you have to uninstall some system apps like Chrome, YouTube and other, after that you can flash Xposed.
Click to expand...
Click to collapse
OK I will try.
I have rooted my yureka plus on august 2015,then when update came I flashed it and somehow root was gone.
After that I rooted yesterday(but this time as my bootloader is already unlocked i only have to double click the flash twrp file then in recovery mode flashed supersu)root done.
Now when I tried to flash closed file in twrp it was done successfully. But as soon as I presses reboot system it displayed YU screen then after some seconds twrp recovery again then I again reboot it via twrp recovery and same thing happened...I am ready to uninstall anything.Thanks
also which apps to uninstall.
[email protected] said:
OK I will try.
I have rooted my yureka plus on august 2015,then when update came I flashed it and somehow root was gone.
After that I rooted yesterday(but this time as my bootloader is already unlocked i only have to double click the flash twrp file then in recovery mode flashed supersu)root done.
Now when I tried to flash closed file in twrp it was done successfully. But as soon as I presses reboot system it displayed YU screen then after some seconds twrp recovery again then I again reboot it via twrp recovery and same thing happened...I am ready to uninstall anything.Thanks
Click to expand...
Click to collapse
Can we connect through something for quick response? plz.
ok i know now
when i flashed xposed x86 sdk 22 arm 64 .zip it showed no space left error.how to install successfully? plz help
thanks for the reply
[email protected] said:
Can we connect through something for quick response? plz.
Click to expand...
Click to collapse
Twrp v2.8.7.0
Can we use any other method for quick response?
[email protected] said:
Twrp v2.8.7.0
Can we use any other method for quick response?
Click to expand...
Click to collapse
Internal storage and /System partition space are different things. You have to uninstall some system apps as I told in my previous post. This guide (old but it'll do) can help you to removing those apps.
After uninstalling some apps you can flash Xposed.
BTW, you can also upgrade TWRP recovery to latest version.
https://dl.twrp.me/tomato/
I'll give my What's app no. if you face any problem after following these steps.
Thank you very much bro!!!!
saurav007 said:
Internal storage and /System partition space are different things. You have to uninstall some system apps as I told in my previous post. This guide (old but it'll do) can help you to removing those apps.
After uninstalling some apps you can flash Xposed.
BTW, you can also upgrade TWRP recovery to latest version.
https://dl.twrp.me/tomato/
I'll give my What's app no. if you face any problem after following these steps.
Click to expand...
Click to collapse
You guided me thoroughly. Thanks a lot .
I've problem on my YU yureka A05510,
I'm having lollipop 5.1.1 having twrp 2.8.0
I've downloaded xposed framework arm64 v78
App alpha3
Flash it but it causes bootloops.
What to do?
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
flash it and don't wipe the data partition after it
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
Flash BETA-SuperSU-v2.67-20160121175247.zip in recovery.
Download:
https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
darkerm said:
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
Click to expand...
Click to collapse
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
ashwin.kj said:
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
Click to expand...
Click to collapse
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
darkerm said:
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
Click to expand...
Click to collapse
Loosing root is expected. Next time you upgrade your ROM, you can try using FireFlash or something similar to try and retain root. But regarding bootloop I am not sure. I usually flash the ROM and gapps and let it boot. If everything is working, then only I flash superSU. Which version are you flashing anyways?
Hi everyone,
I tried to root my G2 on KK with IOroot. After flashing supersu didn't work. It asks to update supersu binary and when i try to udate binary, it fails. I have also tried updating binary after updating supersu app from playstore but same happened. Now i can't remove supersu from phone as it is a system app now. How can i root my phone properly at this stage?
Kindly help
ali.akbar01 said:
Hi everyone,
I tried to root my G2 on KK with IOroot. After flashing supersu didn't work. It asks to update supersu binary and when i try to udate binary, it fails. I have also tried updating binary after updating supersu app from playstore but same happened. Now i can't remove supersu from phone as it is a system app now. How can i root my phone properly at this stage?
Kindly help
Click to expand...
Click to collapse
Try flash newest beta from SuperSU zip or try new better Magisk and after flash not forget to bump with blastagators bumpscript
Zero_Rik said:
Try flash newest beta from SuperSU zip or try new better Magisk and after flash not forget to bump with blastagators bumpscript
Click to expand...
Click to collapse
I don't have any custom recovery installed on my phone, i can't flash what u mentioned. Kingroot also fails
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
g-member said:
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
Click to expand...
Click to collapse
Which oxygenOS? Which magisk version? Did you tried to flash magisk uninstaller before flashing the oxygenOS update and go ahead with the further steps?
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
g-member said:
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
Click to expand...
Click to collapse
Which oxygenOS(stable or beta)? Try to install magisk again, use v17. 3 if not working, flash uninstaller as mentioned before
That did the trick, thnx
g-member said:
That did the trick, thnx
Click to expand...
Click to collapse
Which one? To help others you can mark the thread as [SOLVED] in the headline:good:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
g-member said:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
Click to expand...
Click to collapse
Edit the title and add [SOLVED] at the beginning.