Related
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research before flashing it!
Click to expand...
Click to collapse
Here's the flashable image for andriod 6.0 on XT 1097/1092 devices, without the need to flash radio files to make it work with Indian networks (should work on other XT1092 devices) . Thanks to "Uchoaz10" who posted the image in thread - http://forum.xda-developers.com/moto-x-2014/development/rom-installation-rsd-t3263800 , rather than using RSD flash the image , you can use my custom made Batch file to flash the rom.
Unzip the image and flash fresh zip into one folder and follow below steps.
Instructions
1) Power off device
2) Boot to boot loader ( press power and Volume down for few seconds and let go)
3) connect to computer via USB
4) Run Flash fresh .bat file
5 ) Reboot device
Note : If your stuck in boot loop , reboot to bootloader and select recovery (press volume up) , do an factory reset and reboot.
Use this method to root - http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105 thanks to "Junior Passos"
Download links for Images:
1 - Google Drive: (Working link)
https://drive.google.com/file/d/0B4wmYm0bnkUANlRYR0JnRmdwNWM/view?usp=sharing
Update : Updated with ADB/fastboot in flash fresh zip
shouldn't this work on any Moto X 2014 with an unlocked BL?
munchy_cool said:
shouldn't this work on any Moto X 2014 with an unlocked BL?
Click to expand...
Click to collapse
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
should I do anything extra if I have a XT1092 ? Just run the bat file?
Your download links are not working for me. Part of the links are replaced with "...".
notanoob said:
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
Click to expand...
Click to collapse
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Funnnny said:
should I do anything extra if I have a XT1092 ? Just run the bat file?
Click to expand...
Click to collapse
yes follow the instructions and run the file
StillBrilliant said:
Your download links are not working for me. Part of the links are replaced with "...".
Click to expand...
Click to collapse
I posted links from the original post , ill upload the zip once i get home.
munchy_cool said:
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Click to expand...
Click to collapse
OTA will not get flashed if you try to flash the OTA using an non XT1097 device. Not sure where that check is , if i know that i would not have posted this
Would this work on European XT1092?
I'm also interested in updating my German Moto X XT1092.
aoleg said:
I'm also interested in updating my German Moto X XT1092.
Click to expand...
Click to collapse
FYI the exact same firmware works flawlessly on my retde 1092, I installed it through the TWRP backup though. No extra hassle, everything worked on first boot
Its working on my indian XT1092 ! , as accepted it shows the model as XT1097
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
vibhor98 said:
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
Click to expand...
Click to collapse
backup ! and give it a try!
actually I had unlocked BL and the stock recovery !
I have EU 1092, so after this update a will have 1097??
pepino34 said:
I have EU 1092, so after this update a will have 1097??
Click to expand...
Click to collapse
Exactly.
Does it need a stock recovery to work, or can I flash it with TWRP installed ?
It needs nothing but unlocked bootloader. You can flash via stock recovery. I just did it, and it works just fine. However, I had to do factory reset after installing it as too many apps were crashing. Dirty flash is no replacement for OTA update.
Well, I have just the opposite : I have TWRP installed, and I wanted to know if that was a problem.
You can just flash via fastboot. No recovery needed.
Sent from my iPad using Tapatalk
So, I took the jump and flashed the rom using your file. It seems to have worked just fine, even if right now, it's hanging on the app optimizing part.
Thanks anyway !
Here is what I did to downgrade from 6.0 to 5.0:
1- Download and Install all the required drivers
https://mega.nz/#!tENxTCYI!U_2KD352HgqqsK2qkY7g4xsUIVMhHwOol9aiiDMIs28
2- Download the asus flash tool 1.14
https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
3- Download the Latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]
https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
4- Use the ASUS flash tool to flash the raw image
-Double click the ASUS flash tool Icon to launch it
-reboot your phone on bootloader mode and connect it to your PC
-Choose your device from the list which is in ASUS flash tool
-Locate the raw image
-Click on the serial number which appears on the screen within ASUS flash tool
-Select wipe data
-Click the start button to start flashing
-Wait until you see the message successfully flashed
Note that the whole flashing process takes about 6 minutes.
Enjoy!
Reserved
Ended in error, with wrong image format or error 1
ended in "error: permission denied"
This tutorial won't work, already tried this before when i'm thinking of reverting from MM Beta back to LP Stock, somewhere i've found a post that worked for me, all credits to @BlackForward
BlackForward said:
Hi, I do not speak English very well, but I'll try.
First go to the website of Asus, and download the firmware .. 184 or this link (http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.147549438.850793534.1463019251) and put the external SD Card!!!
NOTE: If your bootloader is similar to the image (with the blue letters ..), you just need to step 3 of this my turorial
ht*tp://www*androidheadlines*com/wp-content/uploads/2015/05/asus-zenfone-2-google-howto-1.jpg (remove "*" again^^)
1. Go to this page (https://www.techmesto.com/root-zenfone-2/) and follow the steps of the second method..
1.1 Download Z00A_WW_2.20.40.184 version (https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw)
1.2 Download and extract FlashTools (http://forum.xda-developers.com/attachment.php?attachmentid=3301263&d=1431011927)
1.3 Extract Z00A_WW_2.20.40.184_system_w_root.zip (for step 1.1) and put the "system.img" in the folder of FlashTools together with "boot.img", "droidboot.img" and "recovery.img"
2. Now follow the steps of the second method (https://www.techmesto.com/root-zenfone-2/), from step 7 to 11;
3. Also I was stuck in the bootloader after this procedure... BUT, you need to download this file (the first method): http://www.mediafire.com/download/v6m7n9j0gqins9b/CWM_Zenfone_2_Intel.zip;
3.1 And follow the steps from 1 to 9 (the first method): https://www.techmesto.com/root-zenfone-2/... EXCEPT: The steps include the root (you do not need the root ..)
3.2 When you are already in CWM recovery, only install the firmware 184 (of start.. of Asus) which is in the external SD Card ... and end ^^.
3.3 I recommend wipe data / factory after starting the device first time...
I have helped
Click to expand...
Click to collapse
If you end up bricked
.and you didn't do any crazy cmds in fastboot mode.
Check my signature
I had been running the MM beta up until this point. I just flashed the .184 RAW file. What made me go back you ask? I figured out that Google Opinion Rewards was not working. I can't live without that.
I can confirm that this method works for ZE550ML on mm beta .69 firmware. I downloaded AFT and flash RAW (Lollipop .149 firmware). Successfully downgraded bootloader unlocked and flashed CM13.
P.S. My status before downgrade was unrooted and bootloader locked and was on .69 mm beta build.
Raiden01 said:
I can confirm that this method works for ZE550ML on mm beta .69 firmware. I downloaded AFT and flash RAW (Lollipop .149 firmware). Successfully downgraded bootloader unlocked and flashed CM13.
P.S. My status before downgrade was unrooted and bootloader unlocked and was on .69 mm beta build.
Click to expand...
Click to collapse
How did you unlock on .69 build?
HungNgocPhat said:
How did you unlock on .69 build?
Click to expand...
Click to collapse
I found a one click bootloader unlock from xda. I downgraded to lollipop .149 firmware and the unlocked bootloader.
Here's the link for unlocking bootloader on lollipop
http://forum.xda-developers.com/zenfone2/general/tool-one-click-bootloader-unlock-root-t3155884
Also there's a method by shakalaca to unlock bootloader in mm beta. I haven't tried it personally because many report that their phones got bricked and most of them could be recovered by xFSTK method.
http://image.prntscr.com/image/734e565caff14053b6a9a0a394b3cddc.png
Error while flashing it, then "permission denied"
Yousvel said:
3- Download the latest raw image WW_ZE551ML_2.20.40.184_20160504.raw
https://yadi.sk/d/4cuw246vryaZA
Click to expand...
Click to collapse
The link for the raw file is dead. Here's another. Same version.
https://www.yadi.sk/d/sw4DS-n3sZtcr
returned4good said:
The link for the raw file is dead. Here's another. Same version.
https://www.yadi.sk/d/sw4DS-n3sZtcr
Click to expand...
Click to collapse
Thanks bro! OP is updated with this new link.
Yousvel said:
Thanks bro! OP is updated with this new link.
Click to expand...
Click to collapse
No problem. It was actually a difficult search. Maybe a mod can add it to the Resources thread.
returned4good said:
No problem. It was actually a difficult search. Maybe a mod can add it to the Resources thread.
Click to expand...
Click to collapse
I will upload the latest raw image version .94 soon
Work for me. OTA works to.
Thx!!!
rafaelcremm said:
Work for me. OTA works to.
Thx!!!
Click to expand...
Click to collapse
Thanks for your feedbacks.
OP updated with the latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]
Will this work if I unlocked my phone using this? http://forum.xda-developers.com/zenfone2/general/unlock-zenfone2-android-6-0-beta-unlock-t3411264
Yousvel said:
OP updated with the latest WW_ZE551ML_2.20.40.194_20160713.raw firmware [Mega Mirror]
Click to expand...
Click to collapse
Please, remember to press the thanks button if this is helpful to you.
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
This one
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Tried flashing it. No success. Also the fiingerprint reader is also missing.
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
GeeteshKhatavkar said:
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
Click to expand...
Click to collapse
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
sabithmk said:
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
Click to expand...
Click to collapse
Which city ?I think you should go for the replacement and then update it via OTA when you get a notification.
Any Solutions Yet ?
Has anyone found any solutions yet !?
It is surely a Software issue
Service Center people are asking Rs.6500/- to replace the motherboard
Can't even relock the bootloader as i flashed the Nougat OTA and thus i can't downgrade the bootloader and lock it either !!
Please Help !
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
You found any solution?? I am facing the same problem...
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
I sent it for service and got a free replacement.
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
Yes I found it..
I created a thread. Check this.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
---------- Post added at 11:38 AM ---------- Previous post was at 11:36 AM ----------
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
Check this link friend. I did it. Was having same problem as you.
Check the thread I created.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
echo92 said:
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
Click to expand...
Click to collapse
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
gioyocho said:
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
Click to expand...
Click to collapse
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
Check my link.
You can even OTA update in future if you installed the latest firmware.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
echo92 said:
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
Click to expand...
Click to collapse
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
gioyocho said:
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
Click to expand...
Click to collapse
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
echo92 said:
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
Click to expand...
Click to collapse
well i tried and did not work those run commands
Hi all I have unfortunately lost the proper baseband for my device (XT1643-indian model g4 plus 3gb/32gb)
Prior to posting this, I had my fingerprint lost too. My stupidity was flashing the june fastboot firmware I found on one of the links for motorola rsd cloud clients. :/ With the help of @echo92 i was able to revive the missing fingerprint by pushing hw.img to /dev/block/mmcblk0p43 but still the SIMs won't show up as the baseband has changed to MSM8952_70030.25.03.62.01R DFLT_FSG
I have tried flashing the modem and fsg partitions from the March 1 ROM but still no solution
Any kind of help would be appreciated
Update SIM card recognized but no network at all
tywinlannister7 said:
Update SIM card recognized but no network at all
Click to expand...
Click to collapse
Flashing the modem file for you device didn't change the baseband version? Meaning it didn't remove the suffix at the end...
What happens if you flash a complete stock ROM via fastboot for you device? One that includes all of the files...
Jleeblanch said:
Flashing the modem file for you device didn't change the baseband version? Meaning it didn't remove the suffix at the end...
What happens if you flash a complete stock ROM via fastboot for you device? One that includes all of the files...
Click to expand...
Click to collapse
Bro I already flashed the firmware again..tried the march and june firmwares both
tywinlannister7 said:
Bro I already flashed the firmware again..tried the march and june firmwares both
Click to expand...
Click to collapse
What about this FSG backup (SS, in TWRP) ? Do you have any old backups ?
____Mdd said:
What about this FSG backup (SS, in TWRP) ? Do you have any old backups ?
Click to expand...
Click to collapse
I actually had made these backups specifically for such conditions but i'm unable to find them as of now. I have been able to get the Sims working somehow with @Droidphilev 's flashable modem zip (Available here: https://forum.xda-developers.com/moto-g4-plus/how-to/fxz-flashable-stock-npjs25-93-14-4-t3623010 ). But the baseband I have after flashing this zip is M8952_70030.25.03.62.01p ATHENE_EMEA_DSDS_CUST . Let's see what can be done to revive my phone fully.
tywinlannister7 said:
I actually had made these backups specifically for such conditions but i'm unable to find them as of now. I have been able to get the Sims working somehow with @Droidphilev 's flashable modem zip (Available here: https://forum.xda-developers.com/moto-g4-plus/how-to/fxz-flashable-stock-npjs25-93-14-4-t3623010 ). But the baseband I have after flashing this zip is M8952_70030.25.03.62.01p ATHENE_EMEA_DSDS_CUST . Let's see what can be done to revive my phone fully.
Click to expand...
Click to collapse
your signal is back?
Droidphilev said:
your signal is back?
Click to expand...
Click to collapse
Yes but since the baseband version is different at all, unable to use VoLTE and hence no calls from one of the SIM cards (Jio 4G).
Sent from my Moto G4 Plus using Tapatalk
Please help
tywinlannister7 said:
Yes but since the baseband version is different at all, unable to use VoLTE and hence no calls from one of the SIM cards (Jio 4G).
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
I FLASHED THE MODEM FILE SPECIFIED ABOVE, BUT STILL BASEBAND SUFFIX IS DFLT_FSG
I'M ON INDIAN XT1643
HELP PLEASE
My problem started as i was using 7.1.2 AOSP custom rom
then i switched back to MM Stock rom
Everything was fine till i received June Nougat Update
during update my phone went blank
Somewhere with the help of XDA i found a blankflash file and got bootloader back
then i flashed TWRP and wiped full system, cache, and everything
then through fastboot i installed nougat xt1643, xt1626-40-41
i tried every possible firmware, every modem file available.
Still my fingerprint and SIMs are not working
my bootloader is B1.06
I cant downgrade bootloader and gpt.bin even with unlocked bootloader, my model is switched to g4 i think
i can only flash bootloader and gpt of june update
rest all firmwares give Security Downgrade error
Help me please!!!
How did you solved the fingerprint problem.
rajatgupta1998 said:
Yes but since the baseband version is different at all, unable to use VoLTE and hence no calls from one of the SIM cards (Jio 4G).
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Try this link. I was having same problem. Solved it successfully.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
If u hav Imei num and only required baseband u try this it will work for sure has it corrected mine and others https://forum.xda-developers.com/moto-g4/how-to/baseband-change-t3762270/page2
I cant flash hw.img file
rajatgupta1998 said:
Hi all I have unfortunately lost the proper baseband for my device (XT1643-indian model g4 plus 3gb/32gb)
Prior to posting this, I had my fingerprint lost too. My stupidity was flashing the june fastboot firmware I found on one of the links for motorola rsd cloud clients. :/ With the help of @echo92 i was able to revive the missing fingerprint by pushing hw.img to /dev/block/mmcblk0p43 but still the SIMs won't show up as the baseband has changed to MSM8952_70030.25.03.62.01R DFLT_FSG
I have tried flashing the modem and fsg partitions from the March 1 ROM but still no solution
Any kind of help would be appreciated
Click to expand...
Click to collapse
When I push the hw file.it got struck the boot loader.and the adb command prompt struck on 100%.
rajatgupta1998 said:
I actually had made these backups specifically for such conditions but i'm unable to find them as of now. I have been able to get the Sims working somehow with @Droidphilev 's flashable modem zip (Available here: https://forum.xda-developers.com/moto-g4-plus/how-to/fxz-flashable-stock-npjs25-93-14-4-t3623010 ). But the baseband I have after flashing this zip is M8952_70030.25.03.62.01p ATHENE_EMEA_DSDS_CUST . Let's see what can be done to revive my phone fully.
Click to expand...
Click to collapse
i tried the above mention procedure but it didn't help me and i am also facing the same problem my baseband is changed to european variant 'ATHENE_EMEA_DSDS_CUST" please help me.
rajatgupta1998 said:
Hi all I have unfortunately lost the proper baseband for my device (XT1643-indian model g4 plus 3gb/32gb)
Prior to posting this, I had my fingerprint lost too. My stupidity was flashing the june fastboot firmware I found on one of the links for motorola rsd cloud clients. :/ With the help of @echo92 i was able to revive the missing fingerprint by pushing hw.img to /dev/block/mmcblk0p43 but still the SIMs won't show up as the baseband has changed to MSM8952_70030.25.03.62.01R DFLT_FSG
I have tried flashing the modem and fsg partitions from the March 1 ROM but still no solution
Any kind of help would be appreciated
Click to expand...
Click to collapse
How to revive fingerprint?
Helpme please
Baseband, Dual Sim and FP Issue
BORNIOS said:
How to revive fingerprint?
Helpme please
Click to expand...
Click to collapse
Originally Posted by anon10041998
Steps u should follow :
1. Download stock rom from this link androidfilehost.com/?fid=890278863836286757
2.Flash the stock rom
3. Restart your phone in bootloader and flash TWRP, do not boot system. Restart in TWRP
3. Download these files from drive.google.com/drive/folde...mymw-UNe9KtRNm
4. copy the files to your adb or miniboot folder.
4. Flash using the following commands
adb push modem.img /dev/block/mmcblk0p1
adb push fsg.img /dev/block/mmcblk0p16
adb push hw.img /dev/block/mmcblk0p43
5.Go to ur bootloader again. with fastboot. and flash with that same latest stock rom and check. ur baseband once.
6. I think this baseband will come as EMEA_CUST. But it will get signal network.
7. Now download this zip cloud.mail.ru/public/2Xrm/3vbzbxX5U
8. unzip pws is lenovo-forums.ru
9. Copy all files in ADB folder and delete all previous files
10. Put device into bootloader mode
11. Run programutags --> select APAC --> select INDIA
12. Done
Urgent help
I'm unable to recover sim card and fingerprint (after rooting) option in setting on my Moto g4 plus XT1643 3/32gb Indian version.unrooted successfully currently on stock rom. But no difference. Need help. Please email me on [email protected].
Anand9552 said:
I'm unable to recover sim card and fingerprint (after rooting) option in setting on my Moto g4 plus XT1643 3/32gb Indian version.unrooted successfully currently on stock rom. But no difference. Need help. Please email me on [email protected].
Click to expand...
Click to collapse
do you see any baseband
please share pic
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
reganEZ said:
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
Click to expand...
Click to collapse
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
riyan65 said:
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
Click to expand...
Click to collapse
So just download a TWRP flashable 8.1.0 rom and i m good?
reganEZ said:
So just download a TWRP flashable 8.1.0 rom and i m good?
Click to expand...
Click to collapse
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Click to expand...
Click to collapse
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
+ i tried the method and it says "slot not found" error
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
reganEZ said:
+ i tried the method and it says "slot not found" error
Click to expand...
Click to collapse
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Wolfcity said:
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
Click to expand...
Click to collapse
Hello, Thank you for your reply.
I understand I cannot use an older firmware. I remember I unlocked my BL when I was in 7.0 itself, but when I installed the Arrow 9.0, I flashed the 8.1 firmware zip to get the NFC and Fingerprint working. So now my ro.build fingerprint doesnt tell me which firmware build i am on it just says "8.1"
I am confused what to do. Should I download the latest 8.1 moto rom and flash it? I tried the TWRP flashable rom but the phone just goes upto Hello Moto bootscreen and then bootloops.
I erased everything and flashed PE 9.0 again.
reganEZ said:
Hello, Thank you for your reply.
.....Should I download the latest 8.1 moto rom and flash it?.......
Click to expand...
Click to collapse
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.batflashallO.bat?dl=0
Click to expand...
Click to collapse
Wolfcity said:
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Click to expand...
Click to collapse
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
MrAshuBrar said:
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
Click to expand...
Click to collapse
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
Flash all the system files while locking. (0-8). Older locking guides have only 0-4. Newer firmware has 9 system files.
Wolfcity said:
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
Click to expand...
Click to collapse
Thank you so much ?