I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research before flashing it!
Click to expand...
Click to collapse
Here's the flashable image for andriod 6.0 on XT 1097/1092 devices, without the need to flash radio files to make it work with Indian networks (should work on other XT1092 devices) . Thanks to "Uchoaz10" who posted the image in thread - http://forum.xda-developers.com/moto-x-2014/development/rom-installation-rsd-t3263800 , rather than using RSD flash the image , you can use my custom made Batch file to flash the rom.
Unzip the image and flash fresh zip into one folder and follow below steps.
Instructions
1) Power off device
2) Boot to boot loader ( press power and Volume down for few seconds and let go)
3) connect to computer via USB
4) Run Flash fresh .bat file
5 ) Reboot device
Note : If your stuck in boot loop , reboot to bootloader and select recovery (press volume up) , do an factory reset and reboot.
Use this method to root - http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105 thanks to "Junior Passos"
Download links for Images:
1 - Google Drive: (Working link)
https://drive.google.com/file/d/0B4wmYm0bnkUANlRYR0JnRmdwNWM/view?usp=sharing
Update : Updated with ADB/fastboot in flash fresh zip
shouldn't this work on any Moto X 2014 with an unlocked BL?
munchy_cool said:
shouldn't this work on any Moto X 2014 with an unlocked BL?
Click to expand...
Click to collapse
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
should I do anything extra if I have a XT1092 ? Just run the bat file?
Your download links are not working for me. Part of the links are replaced with "...".
notanoob said:
The 6.0 OTA that got released was for brazil , to flash the OTA you had to convert your phone to XT 1097 first and then flash the OTA . When flashed the OTA , mobile network would not work till correct radios are flashed . With the above method you do not need to convert to XT 1097 or flash radios (atleast for carriers in India)
Click to expand...
Click to collapse
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Funnnny said:
should I do anything extra if I have a XT1092 ? Just run the bat file?
Click to expand...
Click to collapse
yes follow the instructions and run the file
StillBrilliant said:
Your download links are not working for me. Part of the links are replaced with "...".
Click to expand...
Click to collapse
I posted links from the original post , ill upload the zip once i get home.
munchy_cool said:
I know that... But do you know where the check in the ota file is which prevents it from installing on 1092?
V8 pony it is
Click to expand...
Click to collapse
OTA will not get flashed if you try to flash the OTA using an non XT1097 device. Not sure where that check is , if i know that i would not have posted this
Would this work on European XT1092?
I'm also interested in updating my German Moto X XT1092.
aoleg said:
I'm also interested in updating my German Moto X XT1092.
Click to expand...
Click to collapse
FYI the exact same firmware works flawlessly on my retde 1092, I installed it through the TWRP backup though. No extra hassle, everything worked on first boot
Its working on my indian XT1092 ! , as accepted it shows the model as XT1097
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
vibhor98 said:
Do I need an unlocked BL, root or custom recovery to flash this, or can i flash this on stock firmware 5.1, with locked bootloader
Click to expand...
Click to collapse
backup ! and give it a try!
actually I had unlocked BL and the stock recovery !
I have EU 1092, so after this update a will have 1097??
pepino34 said:
I have EU 1092, so after this update a will have 1097??
Click to expand...
Click to collapse
Exactly.
Does it need a stock recovery to work, or can I flash it with TWRP installed ?
It needs nothing but unlocked bootloader. You can flash via stock recovery. I just did it, and it works just fine. However, I had to do factory reset after installing it as too many apps were crashing. Dirty flash is no replacement for OTA update.
Well, I have just the opposite : I have TWRP installed, and I wanted to know if that was a problem.
You can just flash via fastboot. No recovery needed.
Sent from my iPad using Tapatalk
So, I took the jump and flashed the rom using your file. It seems to have worked just fine, even if right now, it's hanging on the app optimizing part.
Thanks anyway !
Related
Alright, so I decided to make a thread trying to make it easier for people to find guides so they can easily upgrade to Lollipop. Forums seems a bit messy.
Special thanks to @rolgar20 for helping me out with my XT1063
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[UPDATE] If you own a XT1063/64 device, flash this updated lollipop stock rom found here, thanks to @KennyWuLee
[Prerequisites]
First things first, you MUST be using stock 4.4.4 firmwares for your model, or the model you want to update via stock recovery.
CUSTOMS RECOVERY LIKE TWRP O CWM WON'T WORK.
If you never unlocked bootloader, jump to step 5
Note: You can flash the firmware from another model (ex. flash XT1064 on XT1063) to run the specific OTA for that software, though is NOT RECOMMENDED
Download Motorola Drivers for Windows
Take a look at the stock firmwares (Links down)(thanks to @lost101) and download the file meant for your model.
New Links http://motofirmware.com/files/category/38-titan/ (Download 21.85.17 for XT1063 and XT1064, thanks to MotoFirmware)
Download adb/fastboot files
Note: You can skip this step following THIS guide (thanks to @Shawn5162)
Unzip both stock firmware and fastboot in the same folder, shift+right click on the screen and click on "open command prompt from here" and run these commands one by one
Code:
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash system system.img_sparsechunk.3
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata
Boot your device, then download and copy to internal sdcard the OTA file FOR YOUR MODEL from the following links below
XT1063 Global Single Sim Version
[OTA] Moto G 2014 XT1063 v22.11.6 Android Lollipop (thanks to @Taimur Akmal / @KennyWuLee )
XT1064 Consumer Cellular (US Single Sim)
[OTA] Moto G 2014 XT1064 v22.11.6 (thanks to @surenzxx)
Power off your device and get into fastboot mode, then choose "Recovery"
A broken android logo should appear, press and hold VolUP+VolDwn, then press and release the power button
Recovery options should appear, select "Choose update from sdcard" and use your ota file.
Wait until it finishes upgrading and voilá, you have Lollipop (Note: Updating takes about 5-10mins and the first boot almost the same time)
UPDATE: The new 22.11.6 Lollipop OTA can be found here for XT1063 thanks to @KennyWuLee and @Taimur Akmal, just flash it via stock recovery with a clean stock lollipop firmware. (If update fails, flash stock Kitkat, boot, flash 1st OTA, boot, flash 2nd OTA and you're done....)
There's a guide for XT1068 using a XT1063 firmware
XT1068
Lollipop 2-Sim Working with XT1063 OTA (thanks to @luisjoseb)
Rooting Lollipop
XT1063 - XT1068
Check the CF-AutoRoot website and look for your model at the end.
Code:
Just unzip the file, boot your phone into fastboot mode (power + vol dwn for about 3 seconds) and open root-windows.bat
Note: Tested on XT1063 and it gets stuck in bootloop (maybe I'm doing something wrong?)
Edit: Bootloop issue is partually fixed. Sometimes it loops 2-3 times and after 5-10mins it boots normally.
XT1064
XT1064 Lollipop Root (thanks to @savoca)
Good to see everything essential like Upgrading to Lollipop 5.0 & Rooting Lollipop 5.0 in a single thread :thumbup:
HOW CAN I DOWNGRADE from lollipop aws to kitkat glb and then again upgrade to Lol gib
Hi, I had originally an xt1063 Blur_Version.21.11.17.titan_retuglb.retuglb.en.US
yesterday I flashed Blur_Version.21.11.17.titan_retuaws.retuaws.en.US
And then upgrade to Lollipop retuaws.retuaws.en.US
But CF Auto root does not work (shows waiting for device)
I installed TWRP 2801 recovery and flashed SuperSU. But before it, I tried flashing xt1064 root.img. It makes the root checker to show my device as xt1064 and supersu was not working fine. So, I unroot using SuperSu, the binary files are deleted, but supersu remains the same.
I then today found retuglb.retuglb.en.US OTA, but I cannot downgrade to Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.
HOW CAN I DOWNGRADE?
Flash the stock firmware through fastboot commands (those shown above, use those fastboot files, not mfastboot). It will say boot downgraded but it's fine. You won't be able to lock the bootloader again though, but you can flash stock xt1063 then update to lollipop.
Isn't stock recovery enough?
Quick question: do I have to flash the stock firmware and apply OTA zip? I am pretty much stock+twrp+root+xposed. If I uninstall xposed and flash the stock recovery, will I not be able to OTA from within the ROM?
The phone is now prompting me for OTA every now and then. This is 1064 model.
If you got the official update via ota and you have a custom recovery, update just won't work. Xposed doesn't work on Lollipop, it's not ART compatible yet. You should at least flash the stock recovery.img via fastboot to succesfully update, but in my opinion you should clean install the stock firmware before updating.
Is lollipop on our moto g showing the same problems that N5 users have been reporting? Especially the WiFi problems. I have no idea yet as it's not rolled out here in the UK yet.
Lollipop on the n5 works flawlessly. The n5 users complaining about bugs, including the WiFi bug, don't know how to install it properly. By properly I mean via fastboot, 1 image at a time. They dirty flash, or use scripts, and then complain that things aren't working properly.
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
As for it working on the moto g, I'm not sure because my wife hates change and won't install the ota
Could a mod please move this to the Android Developer section? I think it fits better there.
it does not work
appears installation aborted :crying::crying:
jonh.solis said:
appears installation aborted :crying::crying:
Click to expand...
Click to collapse
What's your model? Are you sure you're using the correct OTA for your system software?
savnex said:
What's your model? Are you sure you're using the correct OTA for your system software?
Click to expand...
Click to collapse
i have 21.11.24.tita_retla_ds.retla.en.01
jonh.solis said:
i have 21.11.24.tita_retla_ds.retla.en.01
Click to expand...
Click to collapse
It won't work because you're trying to apply an update for the XT1063 retglb using a retla firmware.
You'll have to flash stock firmware for XT1063 retglb then apply the OTA, though I wouldn't recommend that.
savnex said:
It won't work because you're trying to apply an update for the XT1063 retglb using a retla firmware.
You'll have to flash stock firmware for XT1063 retglb then apply the OTA, though I wouldn't recommend that.
Click to expand...
Click to collapse
Hi I'm using CC 21.11.23.titan_ccaws.AWSCC.en.US cc (XT1064)
I have flashed it with MotoFlash3.2 with Blur_Version.21.11.17.titan_retuaws.retuaws.en.US and tried to use Blur_Version.21.11.17.titan_retuaws.retuaws.en.US (Lollipop) to update it says fail at "/system/app/3c_main.apk" has unexpected contents. Installation aborted.
Any suggestions thanks?
EDIT* I think I figured it out. First you have to unlock bootloader with Motorola website then you can flash with Motoflash with Blur_Version.21.11.17.titan_retuaws.retuaws.en.US. Then download the Blur_Version.21.11.17.titan_retuaws.retuaws.en.US and update files in recovery. Hopefully this all works.
is there no ETA fot the official update (update by phone) of Lollipop? Thanks
I install the OTA, now all good just mi internet mobile dosen't work, it's stuck on GSM only no EDGE o 3G
HTroX said:
I install the OTA, now all good just mi internet mobile dosen't work, it's stuck on GSM only no EDGE o 3G
Click to expand...
Click to collapse
There are still some bugs on those OTA files, they were meant for a soak test even though Motorola said it's official. Earlier today, I had no volume when making or receiving calls. I went back to KitKat and now I'm waiting for an official release (no date yet, afaik)
savnex said:
There are still some bugs on those OTA files, they were meant for a soak test even though Motorola said it's official. Earlier today, I had no volume when making or receiving calls. I went back to KitKat and now I'm waiting for an official release (no date yet, afaik)
Click to expand...
Click to collapse
How i go back to kitkat? Thanks...
HTroX said:
How i go back to kitkat? Thanks...
Click to expand...
Click to collapse
Follow the guide from steps 2 to 4
savnex said:
Follow the guide from steps 2 to 4
Click to expand...
Click to collapse
Can i just flash the stockfirmware? i have the lock the bootloader. 'Cause mu phone is new...
If your XT1068 is the later version (came from factory with 5.0.2 -it has toshiba front cam) Kitkat will work BUT you will LOSE use of front cam as kitkat has no drivers for this
4.4.4 KITKAT XT1068 Easy Installer
Simple quick Installer of firmware via fastboot
the 4.4.4 Retaildsdsall (GLOBAL) firmware
YES IT CONVERTS UK (GB) PHONES
this is STOCK firmware with no mods,
So Will receive ALL Future OTA updates
and installs over ANY version of 4.4.4 /5.0.x / Custom Rom
(does not check - just flashes regardless of version)
by Auto Restore Script
Requires Windows 7/8/10 to run script
WARNING READ THIS!
MAKE A FULL BACKUP OF PHONE
via play and TWRP or your favorite method. DO NOT SAVE TO PHONE save to pc and a flash drive
(2 copies - cover yourself)
Try to have Battery over 70% charged - 50% OK under 30% DANGER
This flashes back STOCK UNTOUCHED files inc, GPT, modem, boot, recovery, bootloader, system etc etc (basically only your external SD card is left alone!!)
CLEAN FLASH ONLY, so do a
Full factory Reset / wipe required before installation
from phone backup & reset in settings
YOU can HANG / KILL your phone if IGNORED
-- USE @ OWN RISK --
DOWNLOAD
Kitkat 4.4.4
.14 .23 .27 versions (global) + UK (GB) .23 + DE (German) .14
stock firmware + installer AIO
+ INSTRUCTIONS
Download and save to PC / laptop / desktop - DO NOT save the Download to phone or SD Card
A) Firmware KXB21.85.14 (earliest version) https://mega.co.nz/#!mo8wnRJI!APkjY2f_bk-HB2JFBCoWh5rmPvltqCzgTQjQf1t-MHQ
B) Firmware KXB21.85.23 (DSDS ALL) https://mega.co.nz/#!Kkc31L4A!JLtksSioP_xnOZ6m3CR570o9Dxm7LbPgEF2gnkDF_TI
C) Firmware KXB21.85.27 (latest version) https://mega.co.nz/#!CltVzboY!etSjBHqKdMrQTYsh1LcsdMj9S3McG7gkfXRMI7WYPJQ
D) Firmware KXB21.85.23 - GB Region (UK) https://mega.nz/#!yotQhYjK!w0FcxKw1s6w4Ro125mwAvxcoPywnVso8Fa5BihW2Z3k
E) Firmware KXB21.85.14 - DE Region (Germany) https://mega.co.nz/#!T10zkTrR!yBTSeScMh2FLbi9GXjf34VRIBHtBsZoKv_XYqdBj9yU
.
.
V 1.0 Retired
V2.0
Simplified Install method, zip now includes instructions, drivers and all required ADB files
no longer needs USB debugging as done via AP Fastboot flash mode
FAQ's
Q1): What exactly is this?
STOCK motorola firmware files, with a added auto restore script, Adb and fastboot, to allow a easy installation.
Q2): What model phone does this work for?
XT1068 , Various Retaildsds firmware, confirmed working on UK (GB), Indian and EU phones NOT for Brazilian XT1068
Q3): What version is this ?
4.4.4 KITKAT version .14 .23 .27 and UK (GB) .23
Q4): Why Must I factory reset /wipe phone?
Simply because your phone will Hang if downgrading, be sluggish and other problems..... if you can flash firmware - you can make back up 1st and reload all you apps and data - Do it right 1st time
thanks for this.....i'll try your tools later, now i'm not able to use pc!!!
Will this restore the Indian Version to stock as well?
If so can I use the all earliest firmware that you have provided or should I download one specific to my region?
arjunpaliath said:
Will this restore the Indian Version to stock as well?
If so can I use the all earliest firmware that you have provided or should I download one specific to my region?
Click to expand...
Click to collapse
A and B should work on ANY XT1068 as it's a Retail for ALL Dual sim, (it may or may not have certain languages) but if you can find your original firmware it's a easy job to add the automated script
My fone came with KXB21.85-23 installed. Noticed big battery drain. Should switch to ART instead of Dalvik?
reefuge said:
A and B should work on ANY XT1068 as it's a Retail for ALL Dual sim, (it may or may not have certain languages) but if you can find your original firmware it's a easy job to add the automated script
Click to expand...
Click to collapse
Thank you. Was able to find my original firmware and restore to stock.
Rexton270 said:
My fone came with KXB21.85-23 installed. Noticed big battery drain. Should switch to ART instead of Dalvik?
Click to expand...
Click to collapse
I'm just leaving mine as is till lollipop comes out as OTA for XT1068
Wait, wouldn't the boot loader message modified prevent this roms from getting otas since it's a change to a file system?
Nagass said:
Wait, wouldn't the boot loader message modified prevent this roms from getting otas since it's a change to a file system?
Click to expand...
Click to collapse
I dont think so as you can still download OTA with modified Roms, but you need Stock recovery to install - but if it worries you edit the .bat script to remove the line with logo2.bin in it near end of script.
if we cant OTA install, but have a OTA zip of Lollipop we can modify it and just flash it via mfastboot method anyway
reefuge said:
I dont think so as you can still download OTA with modified Roms, but you need Stock recovery to install - but if it worries you edit the .bat script to remove the line with logo2.bin in it near end of script.
if we cant OTA install, but have a OTA zip of Lollipop we can modify it and just flash it via mfastboot method anyway
Click to expand...
Click to collapse
I don't know, I'm quite new to Motorola phones but I read in this forum more than once that for OTA updates (atleast for the lollipop one) you must have a completely stock rom, even a frozen system app would make the update fail to install.
Nagass said:
I don't know, I'm quite new to Motorola phones but I read in this forum more than once that for OTA updates (atleast for the lollipop one) you must have a completely stock rom, even a frozen system app would make the update fail to install.
Click to expand...
Click to collapse
I have run 4.4.4 versions .14 .23 and .27 on my xt1068 as well as modded xt1064 5.0 and modded xt1069 5.0.1 , so worst case is All I will be able to run is modded roms, but i'm 99.99% sure that if you have the correct OTA for you Android version on phone there will be a way to upgrade.
reefuge said:
I have run 4.4.4 versions .14 .23 and .27 on my xt1068 as well as modded xt1064 5.0 and modded xt1069 5.0.1 , so worst case is All I will be able to run is modded roms, but i'm 99.99% sure that if you have the correct OTA for you Android version on phone there will be a way to upgrade.
Click to expand...
Click to collapse
Well anyway I just saved all of your packages just in case I'll ever need to restore my UK XT1068 back to stock.
I still have bootloader locked and everything as it came out of the box waiting for 5.0 OTA (of course I'll try to get the link and post it on XDA )
Nagass said:
Well anyway I just saved all of your packages just in case I'll ever need to restore my UK XT1068 back to stock.
I still have bootloader locked and everything as it came out of the box waiting for 5.0 OTA (of course I'll try to get the link and post it on XDA )
Click to expand...
Click to collapse
Lol sometimes wished I had waited for OTA 5.0
hi ,
when I tried to return to stock through bat file , when was the time to writing partition , it says <bootloader>Preflash validation failed .
Has anyone idea why?
nitsos said:
hi ,
when I tried to return to stock through bat file , when was the time to writing partition , it says <bootloader>Preflash validation failed .
Has anyone idea why?
Click to expand...
Click to collapse
is your bootloader unlocked? this method requires UNLOCKED bootloader
Yes,I have bootloader already locked
as of 14/01/2015 firmware B is Accepting OTA zip update (copy to internal memory AND SDCARD ) to Lollipop 5.0.2 from india
bro can you please upload Firmware KXB21.85.23 (DSDS ALL) to google drive as some people are not able to access mediafire??!!
★★★★Lollipop 5.0.2 "Over The Air"★★★★
Enjoy Sweet Teasty Lollipop
Downloads:
1. http://goo.gl/RQF4Wm [Mega]
OR
2. http://goo.gl/o6FkFc [Drive]
OR
3. https://yadi.sk/d/zWtiujQmdvwj2 [Yadex]
Pre-Requisite:
1. Stock Rom 4.4.4
2. no locked bootloader is required, just copy the zip to phone, run system update, zip should be correctly named, it will be verfied and detected and copied to internal if everything is fine, same as in past.
Installation Method:
DEFAULT PROCEDURE For Locked/ Unlocked bootloader [non rooted and NO MODIFICATION done to stock ROM]
Paste the file in SD card root directory (not in any folder)
Go to settings > about phone > system updates > check for updates
Sit back and relax
For Unlocked bootloader [rooted and/or MODIFICATION done to stock ROM]
Remove the root
Undone any changes done to stock rom. :- Users have success in installation via CWM/ TWRP by renaming the file.
Rename the file to Blur_Version.220.21.28.falcon_umtsds.AsiaRetail.en .03.zip no spaces in between.
If you are not getting success, then you have to revert to stock rom [Motorola supplied]
OR
1.Copy this file into the root of directory of Internal SD (i.e Internal SD itself, no subfolders)
2. Reboot to Stock Recovery using Holding down VolumeDown+Power button to go to Bootloader, Then VolumeDown=>VolumeUp to recovery.
3. Apply update from SD and choose the downloaded package.
4. TaDa, Enjoy Lollipop
You Tube Tutorial:
5.0.2 Update Doesn't wipe Internal Memory
Hit Thanks If it Help's
Is it "okay" to install it on XT1032 UK.retail ?
nikolov47 said:
Is it "okay" to install it on XT1032 UK.retail ?
Click to expand...
Click to collapse
No. dual sim only. aisa users can flash this zip.
I have unlocked my bootloader while having stock rom. is there any method to install it?.
ps. I don't mind if wiping of data is required. ?
K1Ng0r.fTw~ said:
No. dual sim only. brazil and aisa users can flash this zip.
Click to expand...
Click to collapse
It is same as the Russian zip ...now 3 threads ...
ivanlau said:
I have unlocked my bootloader while having stock rom. is there any method to install it?.
ps. I don't mind if wiping of data is required. ?
Click to expand...
Click to collapse
Lock bootloader is cumpalsary. for flashing this zip
Any had success with unlocked bootloader?? Why it is necessarry to have locked bootloader
vivekj said:
Any had success with unlocked bootloader?? Why it is necessarry to have locked bootloader
Click to expand...
Click to collapse
No one succeed in future to. its rule for flashing ota lock bootloader need.
hey now i am in lollipop 5 in Brazil frimwere and bootloader is unlocked so can i able to update this 5.0.2 ?
You sir are wrong.
1- its asian retal, will flash on asia retail fw only, not on brazil.
2- no locked bootloader is required, just copy the zip to phone, run system update, zip should be correctly named, it will be verfied and detected and copied to internal if everything is fine, same as in past.
a9853018784 said:
hey now i am in lollipop 5 in Brazil frimwere and bootloader is unlocked so can i able to update this 5.0.2 ?
Click to expand...
Click to collapse
No need lock bootloader and stock recovery to flash this zip.
K1Ng0r.fTw~ said:
No one succeed in future to. its rule for flashing ota lock bootloader need.
Click to expand...
Click to collapse
What u really need is fully stock (no change in system partition) . Only by unroot or flashing Stock recovery will not help as system partition is already changed . U need to flash stock rom through fastboot then flash lollipop manually unlocked or lock bootloader does not matter
Xicor Yagami said:
You sir are wrong.
1- its asian retal, will flash on asia retail fw only, not on brazil.
2- no locked bootloader is required, just copy the zip to phone, run system update, zip should be correctly named, it will be verfied and detected and copied to internal if everything is fine, same as in past.
Click to expand...
Click to collapse
Ohkk thanks thread updated.
Will it work for Bootloader Unlocked Brazilian version
I rooted my mobile and installed Brazilian version for Installing Android 5.0
Will it work for me now?
Thanks
amarilindra said:
I rooted my mobile and installed Brazilian version for Installing Android 5.0
Will it work for me now?
Thanks
Click to expand...
Click to collapse
No. Asian only
K1Ng0r.fTw~ said:
No. Asian only
Click to expand...
Click to collapse
So, I should Install Stock again?
amarilindra said:
So, I should Install Stock again?
Click to expand...
Click to collapse
need aisan stock not brazil
Thanks for capturing the OTA , now nobody will call the soak testers selfish ,
Anyway this won't be the final build because there is still bug in adaptive display and recents
jaspreet997 said:
Thanks for capturing the OTA , now nobody will call the soak testers selfish ,
Anyway this won't be the final build because there is still bug in adaptive display and recents
Click to expand...
Click to collapse
What bugs, please elaborate!
which one should i download... 356 mb or 178 mb file.. I am on unlocked bootloder
Google Play Edition Lollipop 5.1
1 Click Installer
Root, Custom Recovery and change Boot Logo All-in-One Pack
Created for personal usage, just share it now for those
who want to upgrade to Lollipop 5.1 from 5.0.1, stock motorola 5.0.2
or custom roms like CM12, ResurrectionRemix, BlissPop, Euphoria OS, etc
The easiest way how to install rom, root, recovery
CONTAINS
GPe 5.1 Lollipop
15 sec Adb Setup for install ADB, Fastboot and Drivers
TWRP recovery 2.8.6.0
SuperSU 2.46
Dark Moto Logo
&
Restore to Default (stock recovery, logo)
USAGE
Download the archive and extract
From "TOOLS" folder run (install) "adb-setup-1.4.2.exe
Reboot your phone to the download mode (power+volume down)
Connect via usb cable to pc
From GPe_5.1_OneClick run (double click on) Flash_GPe_5.1.bat
Wait until it finish, than reboot your phone
ROOT & TWRP
Copy the "UPDATE-SuperSU-v2.46.zip" from ROOT-RECOVERY folder to your virtual sd card
Reboot to the download mode (power+volume down) and connect via usb cable to pc
From ROOT-RECOVERY folder run "flash_recovery.bat"
than select recovery and from installed twrp install "UPDATE-SuperSU-v2.46.zip"
CHANGE BOOT LOGO
Download mode + connected usb cable and from folder Dark_MotoLogo run "flash_logo.bat"
RESTORE BOOT LOGO & STOCK RECOVERY
From "Default" folder run "flash_logo.bat" or "flash_recovery.bat"
DOWNLOAD
GPe_5.1.rar
And as always:
I am not responsible for any trouble that may occure by using this guide, such as your phone exploding, your cat dying... you know.
If you're a noob, ask before doing anything you don't know!
That's what XDA threads are for.
I will do my best to give any support needed.
CREDIT AND THANKS
Google for rom
@qd42 for FileFactory link of GPe 5.1
@Chainfire for SuperSU
TeamWin for TWRP recovery
@caitsith2 for Motorola Boot Logo Maker
@Snoop05 for 15 seconds ADB Installer
-reserved- just in case
Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx
pnuda said:
Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx
Click to expand...
Click to collapse
Yep, you can use it but make a backup from your personal files (videos, pictures, music, etc.) because it'll wipe your data and internal storage.
Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works
Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?
Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?
Maybe it's a stupid question but, will this work for the xt1034 version?
To be more specific and avoid future questions like this, does every rom for the xt1032 work for xt1034?
Thank you
Berties123 said:
Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works
Click to expand...
Click to collapse
Ahh buddy, about your errors please read the op carefully. Under thanks you can find links, click on it please and about twrp also. I'm using only official releases not unofficials
BurningKoala said:
Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?
Click to expand...
Click to collapse
No, you can flash moto 5.1 directly whet it will be out.
reganEZ said:
Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?
Click to expand...
Click to collapse
Nope, this is only easiest way how to upgrade to 5.1 and contains the whole 5.1 firmware not only the updates.
Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks
Same question. There is no word about bootloader. Does it have to be unlocked?
BlackBoneBla said:
Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks
Click to expand...
Click to collapse
Yes.
Rendoqoz said:
Same question. There is no word about bootloader. Does it have to be unlocked?
Click to expand...
Click to collapse
Of course.
▪◼ Tapatalk ♦ Moto G ◼▪
@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?
zero995 said:
@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?
Click to expand...
Click to collapse
Just follow mentioned instructions from op.
▪◼ Tapatalk ♦ Moto G ◼▪
Difference between stock Motorola rom and GPE In battery life and performance?
fer2503 said:
Difference between stock Motorola rom and GPE In battery life and performance?
Click to expand...
Click to collapse
Noone can know that when there is no Moto 5.1 firmware yet.
But i assume that the battery life as well as performance should be almost equal. (If they don't screw it up ...I hope they won't)
Flash_GPE_5.1.bat errors
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.
Factory Reset?
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Don't know the answer but mine does the same having upgraded using this method.
Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Sorry, i don't know. You can try it, but maybe something wrong with partitions after 5.0.2.
spikey_w said:
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.
Click to expand...
Click to collapse
Just ignore and reboot. If everything works fine don't care about it.
▪◼ Tapatalk ♦ Moto G ◼▪
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
reganEZ said:
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
Click to expand...
Click to collapse
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
riyan65 said:
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
Click to expand...
Click to collapse
So just download a TWRP flashable 8.1.0 rom and i m good?
reganEZ said:
So just download a TWRP flashable 8.1.0 rom and i m good?
Click to expand...
Click to collapse
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Click to expand...
Click to collapse
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
+ i tried the method and it says "slot not found" error
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
reganEZ said:
+ i tried the method and it says "slot not found" error
Click to expand...
Click to collapse
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Wolfcity said:
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
Click to expand...
Click to collapse
Hello, Thank you for your reply.
I understand I cannot use an older firmware. I remember I unlocked my BL when I was in 7.0 itself, but when I installed the Arrow 9.0, I flashed the 8.1 firmware zip to get the NFC and Fingerprint working. So now my ro.build fingerprint doesnt tell me which firmware build i am on it just says "8.1"
I am confused what to do. Should I download the latest 8.1 moto rom and flash it? I tried the TWRP flashable rom but the phone just goes upto Hello Moto bootscreen and then bootloops.
I erased everything and flashed PE 9.0 again.
reganEZ said:
Hello, Thank you for your reply.
.....Should I download the latest 8.1 moto rom and flash it?.......
Click to expand...
Click to collapse
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.batflashallO.bat?dl=0
Click to expand...
Click to collapse
Wolfcity said:
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Click to expand...
Click to collapse
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
MrAshuBrar said:
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
Click to expand...
Click to collapse
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
Flash all the system files while locking. (0-8). Older locking guides have only 0-4. Newer firmware has 9 system files.
Wolfcity said:
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
Click to expand...
Click to collapse
Thank you so much ?