Greetings pals i have a really big question, i got a S7 Edge from AT&T (SM-G935A) but i cant update to nougat so i flash the unlocked (SM-G935U) firmware to get Nougat so i just wanna go back to AT&T but i cant via odin i downloaded a lot of firmwares labeled to 935A but when i try to flasg via odin it stucks at File analysis and thats it, also i tried with another (older) version of odin and it gives me a soft brick the main cause i want to go back to AT&T its because i want to try Oreo Beta but im stuck
Any help would be appreciated and if something its wrong with this let me know
Related
I recently rooted my phone and flashed custom kernel, I am afraid that it might prevent OTA updates. I need updates to use Gear VR.
So is there anyway to unroot it or get the stock kernel back ? I didnt backup BTW.
And also, the model number of my phone is G928W8 (Canadian), can I use the firmware of G928T (T-mobile), since they share the same kernel, so I think they can share the same firmware.
The only thing that I concern is the LTE band .
You need to find an firmware for your specific model, try it on Samsung page, then flash it with Odin, this should bring you back to stock, so you can take OTA
I don't know if T-mobile firmware will be compatible with yours, you may risk ant try it on, just have Canadian firmware handy and if something goes wrong put the phone in download mode, flash it with Odin and you are again on stock
Hello,
I currently have an unlocked G930A that is running on 7.0, I am using the T-Mobile carrier and I would like to flash to the T-Mobile rom. I know it was possible on marshmallow but I couldn't find any posts regarding 7.0.
If I follow these instructions
Talal916 said:
Thanks bro! You know which version of Odin to use? I'm on 3.12.3 and it's giving me invalid sha md5 error. File is fine. Other guy mentioned Odin from Verizon thread. Couldn't find it
Edit: Found it! It's PrinceComsy Odin 3.12. It worked perfectly! However, now my fingerprint sensor doesn't work. Is that because I didn't flash bootloader? If I flash just bootloader, will it still wipe the system?
Edit 2: Goddamnit Samsung Pay isn't working either. Says I made unauthorized modifications.
Final Edit: So apparently you have to flash Bootloader as well to get Samsung Pay and fingerprint sensor to work.
Basically, Download PrinceComsy's 3.12 Odin from Verizon Root thread. Then flash the latest G930T ROM from SamMobile. Tick BL, AP, CP, AND CSC. Make sure you ran Odin with admin privileges. It'll wipe internal SD so back that up.
Click to expand...
Click to collapse
But using the 7.0 T-Mobile ROM from sam mobile. (I have made a backup of the device with smart switch.)
Should I be okay?
Also to mention: If its only possible to flash the U rom, please do let me know.
Im flash t-mobile rom 7.0 on sm-g930a without any problem and works great and i have better network strenght signal.Im on Ultra-mobile network witch is T-mobile.Wi-fi calling works.
ok i also have ATT sm-g930a and want to install the tmobile rom as i am on tmobile.
the phone is sim unlocked.
do i need to turn off find my samsung fiirst?
Hello everyone,
My device got bricked since I flashed it with Odin yesterday, and now even I re-flash using official firmware, it failed as well……
The model of my phone showing in Samsung official site is G935-P (Sprint version), But that shows on download mode is G935U, maybe the eBay seller had flashed it with G935U firmware…
What version of firmware should I download to recover the OS now? And what could I do to Un-brick my device? Someone who could give me some advice or assistance? Thank you all!
Try Smart Switch. It will automatically download the correct firmware for you.
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
AndrOmega said:
Try Smart Switch. It will automatically download the correct firmware for you.
Click to expand...
Click to collapse
Thanks, I've tried Smart switch, but it doesn't work, fortunately, it's resolved by flashing the latest G935U firmware
gurnsey101 said:
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
Click to expand...
Click to collapse
You're right bro, it was resolved by flashing the latest firmware of G935U, thanks a lot
No problem glad I could help
Hi,
I am trying to flash my SM-G935A AT&T S7 Edge (not carrier unlocked) with the new SM-G935U firmware (G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3) that I dowloaded for my US AT&T S7 Edge. I upgraded my S7 Edge to the latest Oreo firmware via OTA around a month ago.
I used SamFirm to download the image to flash. Anyhow, even though I put every file into its respective category on Odin 3.13.1, I get an "SHA256" mismatch error. I've seen some instruction that say to only add the AP file onto Odin and others say to use the prince cosmey version of Odin. What could be the problem? Does the phone need to be carrier unlocked? Is my firmware too new or of the same version? Do I need to use the prince cosmey version? Is it not possible to flash the g935u firmware onto a g935a phone? Should I use another download source? Should I use the slightly older G2 firmware? Anything else I should consider?
Also, I noticed that I could not download firmware for the SM-G935A using the ATT code with SamFirm? Any reason as to why?
I realize that there are many other threads that touch upon this problem but they are either with a different edition of the phone, firmware version or some other variant. I'm posting a new thread because I want to be as thorough as possible and make sure not to brick my phone by receiving safe advice before moving forward. Thank you for your time!
Below are the SamFirm download details:
SamFirm v0.3.6.0
Checking firmware for SM-G935U/ATT/G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3
Model: SM-G935U
Version: G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3
OS: Oreo(Android 8.0.0)
Filename: SM-G935U_2_20180802135240_rnnvd1mwvs_fac.zip.enc4
Size: 3125412480 bytes
LogicValue: ympm9uc708lgw7kk
Correct Thread?
Did I post in the wrong thread or something? Is that why there is no response? Would someone be kind enought to point me in the right direction if this isn't the right section for such a question?
Thank You
Hi did you find any answers to this issue? i got stuck on same point as you...
Stock Odin checks the version on the device and fails because the U version doesn't match the A version you are "upgrading". There are patched versions of Odin that skip this check, and that is what you need to do a cross-carrier upload.
Exfirexs said:
Hi did you find any answers to this issue? i got stuck on same point as you...
Click to expand...
Click to collapse
Use a patched odin to flash the firmware, it will go through.
0x0null said:
Use a patched odin to flash the firmware, it will go through.
Click to expand...
Click to collapse
Hi, yes it worked!
My Samsung galaxy s7 edge (G935F) Is stuck in a boot loop and doesn't have an OS installed. Bit unsure what to do. I have tried installing a stock rom and for some reason when I try to copy a zip file to team win TWRP,(and I have MTP enabled) my laptop says this device has either stopped or isn't taking files? Anyone with any ideas please respond and don't tell me try take it to Samsung and ask for a fix cuz I tried that and they said we don't fix rooted stuff. I took it to a phone shop once and they said try flashing a custom rom with Odin. Reply here with any ideas! Thanks!
hey and welcome to xda!
the best and easyiest way is to start new - flash your firmware with ODIN - that will work in every situation!
You need to download stock firmware and start afresh. Stock firmware is the image of the official firmware that came (or updated officially) with your device.
Go to Sammobile and select model number and then your country. Since you didn't mention your country, here's the link that will directly land you to your G935F firmwares: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/
Once you select country, you can read instructions on how to flash the image with Odin (link is also provided there).
Hope this helps Please feel free to ask any query. Happy Flashing!
Sent from my SM-N960F using Tapatalk