ZTE Axon 7 A2017G Bootloader not booting - ZTE Axon 7 Questions & Answers

I was going through the usual steps of flashing lineage 14.1 to my Axon 7.
In one of the guides i was following it recommended downgrading to android marshmallow before flashing lineage, which i did.
I had TWRP installed however this got removed when i flashed the stock marshmallow file which included stock recovery.
However, i cant get it to boot into fastboot, i tried, "adb reboot fastboot", and tried the manual method by holding down the power and + vol.
When it reboot it just skips fastboot and just boots normally
I'm not sure what is wrong, whether the bootloader is corrupt or it is completely missing.
I'm not sure how i can flash a new bootloader if i can't use fastboot. If there is a piece of software out there that can flash without fastboot i would be thankful for a pointer.

GeorgeJohnson5610 said:
I was going through the usual steps of flashing lineage 14.1 to my Axon 7.
In one of the guides i was following it recommended downgrading to android marshmallow before flashing lineage, which i did.
I had TWRP installed however this got removed when i flashed the stock marshmallow file which included stock recovery.
However, i cant get it to boot into fastboot, i tried, "adb reboot fastboot", and tried the manual method by holding down the power and + vol.
When it reboot it just skips fastboot and just boots normally
I'm not sure what is wrong, whether the bootloader is corrupt or it is completely missing.
I'm not sure how i can flash a new bootloader if i can't use fastboot. If there is a piece of software out there that can flash without fastboot i would be thankful for a pointer.
Click to expand...
Click to collapse
You got stuff wrong. I don't know if 'reboot fastboot' works, but it's actually "reboot bootloader". Plus they got rid of it since Marshmallow, and you have to install it if you want it.
Use EDL and install TWRP with it (EDL Tool by djkuz , or axon7tool by tennear). Don't even reflash the bootloader

Choose an username... said:
You got stuff wrong. I don't know if 'reboot fastboot' works, but it's actually "reboot bootloader". Plus they got rid of it since Marshmallow, and you have to install it if you want it.
Use EDL and install TWRP with it (EDL Tool by djkuz , or axon7tool by tennear). Don't even reflash the bootloader
Click to expand...
Click to collapse
Thank you, all fixed now and Lineage installed

Related

A2017G Bootloader mode on 7.1.1?

EDIT: Fixed! Big thanks to @S0wL , @bkores , @tamahouse02 and @tron1 for the help. I made a guide to help other people with the same problem:
Guide to get TWRP again HERE
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Try the menu on the boot screen.
Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Sounds like the issue is with the ROM like it is somehow blocking you from accessing bootloader mode. It's definitely not my toolkit.
Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system
@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.
Choose an username... said:
@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.
Click to expand...
Click to collapse
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery
tamahouse02 said:
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery
Click to expand...
Click to collapse
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd
Choose an username... said:
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd
Click to expand...
Click to collapse
Not same my axon7tool. I use this https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254
Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.
DrakenFX said:
Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.
Click to expand...
Click to collapse
I was thinking about that, but does mifavor let you roll back from an SD update? I'll try later, but i doubt it.
Besides from that is there any way to flash stuff from the stock recovery? It tells me that ZIPs have to be signed only
tamahouse02 said:
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system
Click to expand...
Click to collapse
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?
dnlilas said:
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?
Click to expand...
Click to collapse
Official 3.0.4.1
@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).
dnlilas said:
@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).
Click to expand...
Click to collapse
I use 3.0.4.1 because I flash plenty things before without any issue, so I keep using it.
After write recovery by axon7tool, it's reboot automatically and override the recovery, that why I have to unplug to stop the reboot, and also flash all I can - fortunaeally​ it also stop recovery be overrided
@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?
I've been in the same situation like you @Choose an username... Updated to nougat on G model and I had not bootloader. This is what I did :
1. Downloaded the tool from here https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
2. Installed the driver using the install driver option that you can choose once you connect you phone to your computer
3. Use the tool to perform the unlock bootloader command again even though you have unlocked it before
4. Use the tool to install twrp, it will boot the phone in twrp
5. Flash Supersu before you boot the system first time after flashing twrp
5. Install whatever version of android want after
@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx
Choose an username... said:
@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx
Click to expand...
Click to collapse
Use Zadig then and let me know if it worked
@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??
Choose an username... said:
@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?
Click to expand...
Click to collapse
I try your version once, but it seems not work for me, so I keep using the old one.
---------- Post added at 03:42 AM ---------- Previous post was at 03:39 AM ----------
Choose an username... said:
@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??
Click to expand...
Click to collapse
I thought you had already unlocked bootloader? Why have you done it twice?

Please help! ZTE Axon 7 won't boot after deleting Lineage and TRWP

Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Try to boot into bootloader interface, and issue command "fastboot flash recovery TWRP.img" on your computer( the current working directory should contain the TWRP.img file) . If your bootloader is unlocked, you should see no error of this command. Then press up/down button to select recovery mode. You should see the familiar TWRP again. Good luck!
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
If you dont have recovery, flash it from edl mode, you can flash twrp or stock.
Once you install it, performa a full wipe from stock recovery, and flash a full zip.
I have similar problems, I dont loose recovery, but stock dont boot after coming back from aosp, a factory reset did the job. I think is because different filesystems in data partition
Choose an username... said:
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
Click to expand...
Click to collapse
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
tempest89 said:
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
Click to expand...
Click to collapse
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Choose an username... said:
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Click to expand...
Click to collapse
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
tempest89 said:
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
Click to expand...
Click to collapse
Lol fastboot is not something like EDL, it looks similar to the 5 sec screen...
When you get the 5 sec screen, use the vol keys and pwr to get to the Fastboot option and enter - it should reboot and get to fastboot after some time
You should look up what fastboot, EDL, ADB and DFU are before doing all this stuff - you can mess up badly, and by not knowing you're complicating everything - my explanation and your understanding

Corrupted recovery, no o/s, what to do now?

I have a Axon 7 A2017U, bootloader unlocked. My recovery is corrupted after attempting to flash a older version of TWRP in recovery. I can no longer reboot into TWRP via recovery, it hangs at the ZTE powered by screen. I can't boot into the o/s, it too was corrupted while attempting to restore to stock using the DrakenFX's guide.
Booting into fastboot is a no go either, it just hangs at bootloader screen.
Any suggestions on where to go from here or how to fix the corrupted recovery?
You need to go into EDL mode and use MiFlash and flash a back to stock package. You can find a package here: https://androidfilehost.com/?w=files&flid=160532
Hello maybe i have same problem here. I have A2017G and maybe i have only woked unlocked bootloader. I dont think my EDL is working becouse i cant connect with ADB. Dont have any acces to recovery... i messed up step by step remember.
1. downloaded toolkit and woked fine - 2 installed drivers and working fine with EDL. 3 unlocked with no problems , 4 flashed TWRP with no problems and then i wanted to install lineage os. Downloaded last version lineage , and google apps and one file "A2017G_N_Modem.zip" and put all 3 files on my SD card. I wipe everything and then first installed modem file OK, but on second try with Lineage OS i have any errors and i just cant continue. After this i wanted to go back to original OS and i just locked my bootloader with axon toolkit and after restart i have acces only to Unlocked Bootloader. tryed everithing with axon7toolkit but nothing working. If i try to EDL mode when press volumeUP+volumeDOWN+power my phone have black screen and i thing is powered OFF.
OMFG i just typed "fastboot oem unlock" 5-6 time when i started phone to my bootloaders and now it unlocked and have acces to my TWRP.
Teet1 said:
You need to go into EDL mode and use MiFlash and flash a back to stock package. You can find a package here: https://androidfilehost.com/?w=files&flid=160532
Click to expand...
Click to collapse
Thanks, I flashed it with A2017U_B19-NOUGAT_FULL_EDL and was able to flashed twrp recovery. I was hoping the o/s would be fixed too but I get this error message as soon as o/s load "settings keeps stopping, close app". It appears it's a bad or incorrect stock file. I had to format data in TWRP recovery as the drive was encrypted. So now i'm back at square one.
Bad o/s but working recovery, so I attempted to flash these files to get back to stock but was unsuccessful. It would flash halfway and then just restarts and hung at the bootloader unlock screen.
A2017UV1.0.0B29_RollBackModded.zip
A2017UV1.1.0B32_bootstack_by_DrakenFX.zip
A2017UV1.1.0B32_StockSystem_by_DrakenFX.zip
Am I on the right track? Or should I be flashing with a different os variant?
freeb0rn said:
Hello maybe i have same problem here. I have A2017G and maybe i have only woked unlocked bootloader. I dont think my EDL is working becouse i cant connect with ADB. Dont have any acces to recovery... i messed up step by step remember.
1. downloaded toolkit and woked fine - 2 installed drivers and working fine with EDL. 3 unlocked with no problems , 4 flashed TWRP with no problems and then i wanted to install lineage os. Downloaded last version lineage , and google apps and one file "A2017G_N_Modem.zip" and put all 3 files on my SD card. I wipe everything and then first installed modem file OK, but on second try with Lineage OS i have any errors and i just cant continue. After this i wanted to go back to original OS and i just locked my bootloader with axon toolkit and after restart i have acces only to Unlocked Bootloader. tryed everithing with axon7toolkit but nothing working. If i try to EDL mode when press volumeUP+volumeDOWN+power my phone have black screen and i thing is powered OFF.
OMFG i just typed "fastboot oem unlock" 5-6 time when i started phone to my bootloaders and now it unlocked and have acces to my TWRP.
Click to expand...
Click to collapse
So you didn't read all of the hurdles and warnings about locking the bootloader with non-stock firmware?
Plus you also didn't find out about the Universal Bootloader? Did you even read the installation steps???
You had an error 7, which is that you forgot to install the Universal Bootloader. Do so this time.
EDL has nothing to do with ADB. You can access it with the phone completely off... (volume up and down, and insert usb)

Hard/soft brick

I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
A little progress, I was unable to unlock_critical but its still hanging here
https://imgur.com/a/IdZum
jAm-0 said:
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
Click to expand...
Click to collapse
read through this and follow the steps should be good to go.
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
This is also very helpful
https://mata.readthedocs.io/en/latest/
That's the exact process I was going through, and it finally booted up.
The issue I was having was a bad usb connection which wouldn't allow me to unlock_critical.
SOLVED. Still no Magisk, we'll worry about that another time. 5hrs of troubleshooting is enough for one night.
https://imgur.com/a/ZiBzp
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
jAm-0 said:
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
Click to expand...
Click to collapse
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
wolfu11 said:
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
Click to expand...
Click to collapse
I realize all that, the issue is I cannot access any sort of recovery because I think my bootloader is defective.
For example from a cold restart if I press the power button for say 3 -5 seconds it wont boot, just boot to the Essential logo and loop. To get the phone to boot I have to hold the power down for 15-20 seconds while it bootloops a couple times then it'll boot.
Is there a possible way to reflash the bootloader software if it is defective? It's unlocked btw
There is a way to install magisk via fastboot with a patched_boot img which I'm working on. Cant seem to find the right boot img to patch for 8.1
PS Is it possible to flash .zips through fastboot? e.g. custom roms etc
Was finally able to get into recovery, so all is well. Thanks for the help yall
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
gimpy1 said:
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
Click to expand...
Click to collapse
It's really hard to say, my phone has a serious problem with it. sometimes I cant get it to boot, it will boot into the bootloader over and over and over. I've managed to get Lineage 15.1 on if for a bit until I tried to get back into the recovery which sent it manic.
I just got lucky I was able to get into TWRP and flash lineage.
my first issue not being able to flash the stock image via fastboot because I didn't unlock_critical which can sometimes fail when the usb connection is bad.
Currently flashing stock again if my phone will boot up. I'm not sure whats wrong with my bootloader but its causing a ton of havoc
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
Same boat for me - just keep rebooting to show Powered by Android Screen and then reboot again and again. Was able to see my device using fastboot devices command but all attempts to access recory just repeat the bootloop entry. I would happily check the OEM UNLOCK option in dev settings but can't even get it to book to any OS to make that option happen. Still shows bootloader locked on bootloader screen - any help someone can suggest?
I had this problem tonight also. In my case I suspect it had to do with the install of magisk in which I checked both boxes and patched the bootloader. on reboot I was stuck on boot. Just wanted to add my solution. I got the pie back to stock zip here https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 then I put it into the adb folder and ran the flashall.bat script. I tried the no wipe one and it saved my information. very happy I didnt have to resetup my phone in the end.
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
I am in the same boat. I tried to re-install the OS, but because my USB debugging was not enabled, Fastboot worked but ADB would not and since I basically wiped the recovery area, my phone will only boot into Fastboot but will not allow any loading of recovery. I would pay for someone to help. This is so hard to figure out. I have contacted Essential but since my phone is over 12 months old, the warranty has expired.
Help please. It seems like such a waste to have a bricked phone.

A2017G revert to stock questions

Good afternoon
I have an A2017G with a mod rom android Pie installed on it and with TWRP 3.2.3-0L v1.3
I'd like to revert it to stock in order to sell it.
I can't access to EDL mode with the keys combo, nor with "reboot edl" in a terminal on the phone, nor with "adb reboot download" on my ubuntu machine.
I can access the system (the rom) fine and also TWRP.
Any advice to fix that, any file to flash from TWRP, without screwing up vendor partition, imei, or whatever?
Thanks.
in twrp for zte there is an option to reboot to EDL
Voenix said:
in twrp for zte there is an option to reboot to EDL
Click to expand...
Click to collapse
Well, it just powers off...
chironfr said:
Well, it just powers off...
Click to expand...
Click to collapse
EDL mode has only black screen,
Maybe its online check Qcom bulk or some qualcomm 9008 port in device manager (if its on black screen)
Thanks.
I have sorted it out after digging deeply
Main thing to understand: it's not possible to relock it with nougat oreo or pie installed on it.
So I have:
- Copied all my stuff (pics, vids, books, etc...) to my computer
- Set up a clean W10 on a dedicated machine, without any antivirus crap, installed original qualcomm drivers, ADB toolkit and axon 7 EDL tool on it.
- backed up all partitions with Axon 7 EDL Tool
- from TWRP wiped system, data, storage.
- downgraded to the official original rom (Marshmallow) available on the page EDL
- flashed TWRP on the phone
- installed TWRP_UnlockBootloaderPackage_by_DrakenFX.zip with TWRP
- rebooted to fastboot, then I could finally type from ADB "fastboot oem lock", and that's it!
- The phone rebooted properly, asked me for the country, but since I want to sell it, I didn't go any further.
chironfr said:
Thanks.
...
Main thing to understand: it's not possible to relock it with nougat oreo or pie installed on it.
...
Click to expand...
Click to collapse
In fact, as mentioned by Axon 7 EDL toolkit's author in this post https://forum.xda-developers.com/showpost.php?p=78267172&postcount=200
at least with Marshmallow and Nougat (supported by the toolkit), you can first enable fastboot (unlock fastboot) with the toolkit on stock Marshmallow or Nougat, then use "fastboot oem lock" to lock bootloader in bootloader (fastboot) mode.
Remember to use stock ROM (either by flashing with FULL_EDL package, or by using stock recovery applying to official ZTE update.zip, otherwise the phone would be bricked. User data will be erased (equivalent to factory reset).

Categories

Resources