Database Users

[Guide] How to use Flashtool

Hi everybody welcome to my tutorial about Flashing with Flashtool. This thread is for those who want to reflash their device back to Sony Stock. See below for last details about this thread and the last build by Sony.
Note: I DO NOT OWN THIS DEVICE ANYMORE. PICTURES ARE REMOVED FROM MY DROPBOX AND THUS NOT VISEBLE. FOR NOW JUST RELY ON THE EXPLANATION PLEASE. ANY QUESTION CAN BE ASKED HERE. I DO NOT RESPOND TO TECHMAIL!
Created: 23-02-2014
Updated: 05-07-2014
Latest Android build released by Sony: 12.1.A.1.205
Let's begin shall we.. We shall!
First you need to download the correct ftf file for your device/operator or needs. This can be done here: http://forum.xda-developers.com/showthread.php?t=2311964 In there you can share and download firmware files in .ftf format..
You alsol need a program called Flashtool. You can download this here: http://forum.xda-developers.com/showthread.php?t=920746
For Windows 8 and 8.1 users I also recommend you to read this thread: http://forum.xda-developers.com/showthread.php?t=2095087 Microsoft has enhanced the security in Windows 8/8.1 and Windows won't install proper signed drivers.
When you are done with that you need to move your downloaded firmware file to the proper location for flashtool to be found:
C:\Flashtool\Firmwares
After that you are good to go, just remember the following:
Bootloader locked? If not you wont have BE2/OTA/PCC etc (for unlocking and relocking: http://forum.xda-developers.com/showthread.php?t=2354721 )
I've made backups of my important files that are stored on my phone?
Battery at atleast 50%?
I have patience?
I got something to do meanwhile?
The last two things are very important
Let's get started:
1: Open Flashtool:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashtool(.exe) for 32Bits systems and Flashtool64(.exe) for 64Bits systems
2: Press the Lightningbolt picture and select Flashmode
This will give another screen.
3: Select the downloaded ftf. (In this case 2.254)
Make sure that all the wipes are checked and the others are unchecked. This is to prevent any bootloops or other problems after downgrading.
4: Press Flash and the next two lines will be added to the flashtool log
The files are being prepared and checked. Have a bit of patience please.
5: Turn off your phone and turn it back on into Flashmode
After this the process will start.
After flashing you can disconnect your phone and boot it up.
Via Flashtool you can also reset your system after. For example:
You are running the latest ExistenZe ROM from our beloved Niaboc79 and you want to go back to stock for a reason WITHOUT losing data! Just flash the last Stock ROM and untick the following boxes:
Untick DATA and APPSLOG!! But keep CACHE to wipe the /cache (is the same as a wipe cache via CWM).
FAQ​
- My Phone wont stay into flashmode
> Turn it off, wait a few minutes and turn it back into flashmode
- Flashtool wont recognise my phone
> Make sure you have the proper drivers installed. See C://Flashtool/Drivers
- Flashing failed
> Problem depends on the error code given by Flashtool. Post the problem here and perhaps we can help
- Got a bootloop
> Reflash again
- Even after reflash I got into a bootloop
> Turn off your phone via the small button behind the batterycover and wait a few minutes. Then try again. If that doesnt work you need to flash again.
- Booting takes ages
> This is normal. The entire cache needs to be rebuild. Patience my dear..
- After flashing and booting my phone is laggy.
> Reboot device and wait a bit. The phone needs to fully reset and boot itself. Have some patience dear.
- Do I need to unlock my bootloader to use flashtool
> NO!
- Can I unlock my bootloader with flashtool?
> NO!
- Can I relock my bootloader with flashtool?
> Yes

> Reserved by me

downgrade to root?
first, thanks! Very nice guide. I'm new to the experia world, my previous phone was a Desire S.
I have a question:
I have a problem with all stock roms with the mediaserver process. It is always running while I listen to music (which is a lot of time) and drains a lot of battery (up to 65%). Though I use poweramp player which is totally independent of the process (own library and decoder). On my Desire S on CM11 I don't have the issue this is why I want to move to a custom rom. I'm on 4.3 now (was hoping this would fix the issue) and want to root and full backup with keys for warranty purposes and then move to a custom rom.
Is it right that I have to downgrade first, since there is no root for 4.3 yet? If yes, what ROM? I have a C5303 and don't know what version I had previously. I bought it in Switzerland without SIMlock or any branding. Is there a way I can find out what my previous version was or can I basically just use any generic C5303 version?
Would you recommend 12.0.A.1.284 in order to be able to use DoomLords rootkit: http://forum.xda-developers.com/showthread.php?p=42701183#post42701183 ?
It's just that I don't know if I ever was on this version, also regarding warranty...
I know, many questions, but I just reached a point where I don't seem to get further without asking. Hope someone can clarify some of them.
Thanks in advance!
EDIT: And also I was wondering: In the picture says flashmode is reached by pressing the back button while connection, but there are softkeys. Is it not done with volume down?

mrjraider said:
Small changes.. @ moderators Is it possible this can become a sticky?
Click to expand...
Click to collapse
+1 for a sticky!
Nice done!

TheMorpheus said:
+1 for a sticky!
Nice done!
Click to expand...
Click to collapse
after flashing done
i have to turn on phone & make usb debugging & unknown source option check
but whenever i am going to boot it again reboot after colour bootscreen
i had tried number of times flashing again & again
i am attaching my flashtool log file also
Azhar

According to the log you attached everything went fine. So I dont understand the problem.
Perhaps an idea to redownload it? Sometimes it wont work properly because the ftf file is somewhat damaged..

I have to relock the bootloader before restore?
Edit
No, it's not needed!

reflashig stock rom
Thanks for this nice guide. Im having a lot of issues with the 4.3 rom.
I flashed via SUS, editing build.prop to let the phone detect the new version, because my phone is carrier locked, and they didnt released the update yet.
I have a lot of lag, and I must force reset lots of times, so I want to make a clean install, because last time I only updated.
So my question is, if I do a factory reset, my build.prop is going to change to the original file (Orange's rom) or ill keep with my modified file? (Stock center Europe)
What do you recommend to me? If I reflash a stock European ftf via flashtool, I'll have the stock's build.prop, and I'll receive those Ota updates without problem?
Thanks for your work!

No if you have a TA backup you need to reflash your ROM and Restore TA partition

mrjraider said:
No if you have a TA backup you need to reflash your ROM and Restore TA partition
Click to expand...
Click to collapse
I don't have the backup, because my phone has the bootloader locked, and the only thing I have done is root and editing build.prop to be able to upgrade to European 4.3. Everything is working for me, track id and BE. (btw I have a backup of my build.prop in the computer)
I only want to do a fresh install of 4.3, not my carriers rom, because is on 4.1.2
So can I reflash any Stock 4.3 rom? The rom has it's own build.prop?
Thanks for your help Mrjraider

diolo said:
I don't have the backup, because my phone has the bootloader locked, and the only thing I have done is root and editing build.prop to be able to upgrade to European 4.3. Everything is working for me, track id and BE. (btw I have a backup of my build.prop in the computer)
I only want to do a fresh install of 4.3, not my carriers rom, because is on 4.1.2
So can I reflash any Stock 4.3 rom? The rom has it's own build.prop?
Thanks for your help Mrjraider
Click to expand...
Click to collapse
Yes you can. Simply download the ftf file and follow the steps in the OP

Hi mrjraider,
Many thanks for the guide!
A quick question. I am now in 4.3, bootloader locked. If I downgrade to 4.1.2 (.254 for example) my bootloader is still locked, correct?
Thanks!

Yes

I want to go back to stock from AOSP ROM and I don't know what's the right .ftf file for 12.1.A.0.266 but I think I know the right file for 12.0.A.2.254 (German branded C5303) (I'm from Germany ). If I would flash the 12.0.A.2.254 .ftf file would the Update Center show me the 4.3 OTA update and everything would work like on stock before? And would I lose root even with Voodoo OTA RootKeeper and the option enabled to try keeping Superuser access in SuperSU?

You need to look in the thread I linked to. There you can find many FTF files.

mrjraider said:
You need to look in the thread I linked to. There you can find many FTF files.
Click to expand...
Click to collapse
I know I already looked there but I'm not sure which one is right, because I didn't see a generic one for all C5303 and I don't want do have a foreign branding
Edit: found it, sorry
Gesendet von meinem Sony Xperia SP C5303

hey bro, am looking for Sony C5303_12.0.A.2​.254 tft generic global or CE version also UK version ,am unable to find them . I have being searching xda and a found a link that is broken,so please if any one can help.Thanks in advance.:fingers-crossed:

desmond462 said:
hey bro, am looking for Sony C5303_12.0.A.2​.254 tft generic global or CE version also UK version ,am unable to find them . I have being searching xda and a found a link that is broken,so please if any one can help.Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
Do not ask for ftf files in here. There is a proper thread for this
Normaly I would help but the chances of getting an older update is decreasing every day since the update of Sony has rolled out a few weeks ago

Well done ! Rollback firmware 4.3 to 4.1
Hi guys ! thanks for guide. I got successfull revert my phone from update 266 to 254.

hi sir, i'm on .254 rooted and just want to go back to stock because i want to update it to 4.3, is it the safest way? if so, what will happen to my apps like greenify, Titanium backup, and those apps that was already transferred to sd card? should i have to uninstall these aps? does it have remaining unwiped data to be cleaned if flashing the stock rom?
thank you..

[ROOT 4 Dummies] How to root and update for Locked Bootloader devices [For any OS!]

Root 4 Dummies
I've FINALLY bought a Tab Z (SGP321) and the day I got it, it took me almost 3 hours to slap root on it and install the prerooted KitKat package from @ryany67 (Based on my DIY Guide, so it was a no-brainer for me, really ).
It helps to know your way around XDA but also around Xperia devices in general I was contacted by some users quite fast after I thanked ryany67 to help them root their tablet Z... I decided to do a thread on the subject instead of sending individual replies which would be basically the same.
The reason why I do this thread is simple: it took me ages to find anything in the form of a 'Root4Dummies' on locked bootloader devices. So here it is:
Preparation
To start, download these files, appropriate for your device type:
[FTF] SGP321 10.1.1.A.1.307 Unbranded
[FIRMWARE][SGP311] 10.1.C.0.370 US Version
[FIRMWARE][FTF][SGP312]10.1.C.0.370 (UK version 32GB WIFI Unbranded)
Missing links: SGP351 and the JB 4.1.2 version for the DoCoMo version. If you have a link, please post it!
TabZ-lockeddualrecovery[any version online].installer.zip on [NUT]'s XDA Downloads
The latest FlashTool
The Dummie guide
Make sure you have created a backup of EVERYTHING on your device, which includes internal storage. The Backup & Restore app on your device does a decent job...
WARNING: I won't be responsible for your neglect to make a backup of your sister's wedding photo's you might have lost by following this guide!!
Put the FTF for your device in the flashtool 'firmwares' folder;
Unzip the TabZ-lockeddualrecovery[any version online].installer.zip and remember where you've put it
Power down your device;
Grab your USB cable and connect it to your PC/MAC ONLY;
Start thinking of what you might have forgotten to backup, because the next step will DESTROY ALL CONTENTS ON YOUR DEVICE;
Are you absolutely sure anything important has been moved off the device?
Did I mention the next step will wipe your device clean? The contents of your external SDCard (the one in the external slot, duh) will not be touched.
Are you sure you want to continue?
Okay... here we go:
Start FlashTool, click the lightning bolt button, choose flashmode and click the firmware you have put in the firmwares directory.
We will be flashing EVERYTHING and will wipe EVERYTHING on your device, this way you will be sure the result will be as clean and stable as possible. You can continue up until FlashTool instructs you to connect the device in flashmode.
HOLD the VOLUME DOWN button on your device and while doing that connect the USB cable to it. You should see the LED light up green and FlashTool should start flashing the FTF. Once FlashTool is done, disconnect the USB cable.
Power up your device, go through the initial setup until you can use it.
Go to settings -> about device -> tap the Build number about 7 times until you unlock the developer menu.
Go back one screen and open the developer options, enable it and search for 'USB Debugging'. Tic the box, confirm the choice.
Connect the USB cable
Open the XZDualRecovery 'lockedbootloader' folder and start the install.sh (linux and mac) or install.bat (windows)
Run option 3 (Installation on an unrooted ROM)
Your device will reboot itself when it's done and will go to PhilZ Touch Recovery for the first time to show you it worked OK.
When you tap reboot PhilZ will ask if you wish to root your device, you can confirm you want to if you like Otherwise flash the latest SuperSU yourself.
Congratulations, this part is DONE! You now have a rooted device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already hear you cry out: But wait... it's ROM is WAAAAAAY old now!
You are correct of course
The next step will allow you to update to a more recent one while keeping root and not unlocking your bootloader in the process! :victory:
The choices....
It really boils down to personal preference but you can use all of the RECOVERY FLASHABLE ROM's you can find in the Xperia Tablet Z Android Development forum section. Just make sure you get the version for your device to avoid hardware malfunction.
If you want to make a backup of your TA partition, now is the best time to do it, as you have root now. Have the tool from @DevShaft do it for you: [TOOL] Backup TA v9.10 for Windows [20131228]
After creating a backup of your TA partition you can unlock the bootloader to be able to flash any of the ROM's on the Xperia Tablet Z Original Android Development forum section.
All Done!
Well... that's all folks! :victory:
Happy rooting and remember to have fun! :highfive:
Feel free to ask me questions in this thread about rooting and rooted apps, I'll try to answer them to the best of my knowledge. If you see someone asking something you know the answer to, don't hesitate to reply!!

Thanks to your guide and help, I was finally able to Root my Device.
You are the BEST [NUT]!
Grazie from Italy

the perfect root 4 dummies like me is a one click rooting method .......
I lost my galaxy s2 while rooting and flashing that I do not take anymore chances.....
(I am not a millionaire to buy phone or tablet like a chocolate bar lol)
good work anyhow...
DoomLord did this before for this tab I do see why it cannot be done again ....

Don't need it at the moment, but could have done with it last week
Glad you have a Tab Z though!
Thanks for the info in one place.
Cheers

MikeViller said:
the perfect root 4 dummies like me is a one click rooting method .......
I lost my galaxy s2 while rooting and flashing that I do not take anymore chances.....
(I am not a millionaire to buy phone or tablet like a chocolate bar lol)
good work anyhow...
DoomLord did this before for this tab I do see why it cannot be done again ....
Click to expand...
Click to collapse
Maybe so, but for that to happen we need a very bad bug to exploit...
This guide works with what we have. Using a similar way I am able to restore my Xperia Z, Z1 and Z2 from a soft-brick to working fine within 30 minutes.

Nice guide, @[NUT] ... Do you plan on building a custom kernel for stock ROMS (I'm asking this but I don't even know if you make kernels)? The Tablet Z is in a serious need of one. I'd try one myself, but I haven't had time for a while...
Sent from my SGP311 using Tapatalk

Felimenta97 said:
Nice guide, @[NUT] ... Do you plan on building a custom kernel for stock ROMS (I'm asking this but I don't even know if you make kernels)? The Tablet Z is in a serious need of one. I'd try one myself, but I haven't had time for a while...
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
Been talking to @DooMLoRD about an unofficial doomkernel... We'll see what the future brings....

easy and nice steps! thanks!
after root, I updated to 4.4.2, everything is smoother :good:

Flash New Marshmallow 6.0.1 Official Build

Hi Friends......
Sony has released new firmware for xperia z5 series. If you are eager to get the update then you are at the right place
Requirements :
* Flash Tool
* Firmware
* Data Cable
**************************************************************************************
Downloads
Firmware :
Xperia Z5C E5803 - goo.gl/0x7Xml
Xperia Z5C E5823 - goo.gl/Dvfx6h
Flashtool : goo.gl/cdTaJr
Device Driver ( Optional ) : goo.gl/YzNBCm
**************************************************************************************
Instructions :
Step 1 ) Download and install Flashtool.
Step 2 ) Paste the downloaded firmware (ftf file) C:\Users\---(User Name)---\.flashTool\firmwares\
Step 3 ) Open Flashtool and then click on the lightning bolt in the top left of Flashtool .
Step 4 ) Select Flashmode and click ok.
Step 5 ) Select the firmware build version that you want to flash from the “Firmware” pane. Ensure the device variant is the same as the model number of your Sony Xperia device.
If you want to retain your apps, data and media (photos, videos, music), then ensure that the “USERDATA” option within the “Wipe” pane is unticked. However, we recommend that when upgrading a major new Android version, a clean install is the way to go. In this case, tick all options under the “Wipe” pane. This will wipe all of your data though including your photos and videos, so please ensure you have these backed up elsewhere.
Step 6 ) Click “Flash”. Flashtool will then indicate that it is “preparing files for flashing”.
Step 7 ) You may have to wait around 60 seconds for the pop-up below to appear. Once it does, you should now connect your Sony Xperia device. Make sure the device is powered off and then hold the ‘volume down’ button whilst connecting the USB cable. Once the pop-up disappears and flashing has started, you can let go of the ‘volume down’ button.
Flashtool Will Start Flashing Process
Congratulations you have just installed Latest Android Marshmallow! Now disconnect your Xperia device and power on the handset. Don’t worry if it takes a while for the handset to boot, this is to be expected.
Attached Screenshots Below :fingers-crossed:
Please Hit Thanks If Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You can flash your device with flashtool without unlocked bootloader

Not need unlocked bootloader.
Sent from my Blade III using Tapatalk

This is not working, flashing this firmware gave me a ta. parse error. The reason is that you forgot to exclude the XML file in the TFT

Not quite right though...flash the Sony official ROMs don't require an unlocked bootloader.
Though, still Thanks for your sharing the steps!

Will i lose anything like DRM keys and future OTA updates if i flash this way?

toasded said:
Will i lose anything like DRM keys and future OTA updates if i flash this way?
Click to expand...
Click to collapse
nope. As long as you didn't unlock your bootloader and/or root your system, everything will be kept in place.

mele80 said:
You can flash your device with flashtool without unlocked bootloader
Click to expand...
Click to collapse
Sorry for the wrong information. Will update it asap.

alleebg said:
Not need unlocked bootloader.
Sent from my Blade III using Tapatalk
Click to expand...
Click to collapse
Sorry for the wrong information. Will update it asap.

tanto124 said:
Not quite right though...flash the Sony official ROMs don't require an unlocked bootloader.
Though, still Thanks for your sharing the steps!
Click to expand...
Click to collapse
Sorry for the wrong information. Will update it asap.

Aospa rom 6.0.1

it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.

AWESOME!!! Thanks for the information!

Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
Click to expand...
Click to collapse
I actually have no idea what to do. I'm on a locked bootloader and I have never unlocked and flashed a custom rom on my z3c.
Was just, sharing some info and hoping people would test

matthiastan5 said:
it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.
Click to expand...
Click to collapse
Thanks for info.

For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?

Arch9 said:
For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?
Click to expand...
Click to collapse
Neither one nor the other. All other things seems working fine.

juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
View attachment 3786599
Click to expand...
Click to collapse
I get the same error 7 when trying to install PA. Ive tried modefying the install-script as you did but then i get error 6.
I flashed stock D5803_23.5.A.0.575_R11D_Nordic Generic_1288-5411.ftf and then flashed recovery to TWRP via fastboot but i still get the same error 7 when trying PA after that.
My next attempt is to install that NUT dual recovery and try flash PA after that.

Camera and modem not working

Got it installed (finally...). You need a working TWRP recovery.
What's working:
- WiFi
- Paranoid OTA seems to work; no further build available to try (doubt that it will work without recovery though; see below)
Not working:
- RIL (so no phone or SMS)
- camera
BT and GPS not tested yet.
To be able to flash you need to
- modify updater-script located in META-INF/com/google/android/updater-script (which is actually a text file) of the ROM zip
- open it in a text editor
- replace "aries" with "z3c", save it somewhere (delete .txt if it's saved with this extension; filename must be "updater-script")
- open the zip with 7zip (recommended; dunno if it works with other archivers)
- replace the updater-script with your version in the zip
- place the zip onto your device
- enter recovery
- Factory Reset (no need for a full wipe)
- flash it
- flash MM Gapps directly afterwards (OpenGapps not recommended - use Slim Zero Gapps instead)
- if you want root, flash SuperSU BEFORE rebooting (see below)
Recovery will be lost and can't be installed with TWRP Manager or Rashr after flashing (Didn't work for me - please report if you got it working and if so - how. Maybe with fastboot, didn't try that yet)
Happy flashing...
I'm sure issues will be fixed quite fast in later builds as everything works already in latest Carbon ROM (find it on testing.myself5.de). Maybe @Myself5 can help with that...(?).

juliopw said:
Camera and modem not working
View attachment 3786769View attachment 3786770View attachment 3786771View attachment 3786772
Click to expand...
Click to collapse
I flashed and it's same with you.It's not okay for daily driver.Also it overheats a lot.

Nice, they said they already fixed the mobile radio bug internally and will be releasing a new build soon

radio is fixed and currently fixing camera

From PA's official Google+ post:
We are also announcing that with the help of Sony and their Open Devices Project we will be able to support all 22 Xperia devices on the SonyXperiaDev GitHub Instance. This initial Sony release is for the Shinano family, but the Rhine, Yukon and Kitakami platforms are expected to follow shortly. This is really exciting news for us and it allows us to give you the Android experience we all love on a much wider range of devices.
Click to expand...
Click to collapse
If this is the case, maybe the camera will actually be usable? What do you think guys?
P.S. We should contact a moderator to move this thread to General forums, this is not development.

where is the zip file ?

ultraaslan88 said:
where is the zip file ?
Click to expand...
Click to collapse
It's removed for the meantime
That's because it had so many bugs
Wait for some more days for a better build

Anyone have mirror for last version?

Can i flash this rom on my z3c with SliMM 1.9?

GabrielVacker said:
Can i flash this rom on my z3c with SliMM 1.9?
Click to expand...
Click to collapse
You need unlocked bootloader for this

dont Found file
Wysyłane z Compacta za pomocą Tapatalk 2

[Guide] How To Install OREO Update Before It Is Released

How To Install OREO Update Before It Is Released
Discaimer: I am not responsible for any mistakes, mishaps or BRICKED devices.​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequisites:
Updated to Nougat
Unlocked bootloader
TWRP installed
Basic understanding on how to use TWRP
If you don't know how to unlock your bootloader and install TWRP see post #2
I am using my device the [FRD-L04] as an example in this guide.
Step 1 Get Firmware
Create a folder on you computer and name it "oreo-update".
Go to the Firmware Finder website and find the Oreo update for your device.
Left click on the "filelist" and it will display three download links. One for "update.zip", One for "update_data_full_public.zip" and One for update_full_FRD-L04_hw_usa.zip.
Copy and paste each download link for your device into your browser's address bar and download them to your "oreo-update" folder.
You may see more than three files. The last one will have your model number in it.
Now go to your "oreo-update" folder.
Rename "update_data_full_public.zip" to "update_data_public.zip"
Rename "update_full_FRD-L04_hw_usa.zip" to "update_all_hw.zip"
Step 2 Get HuRUpdater
HuRUpdater is a great program that flashes unapproved and approved updates in TWRP.
Go to the HuRUpdater post and download the latest version to your "oreo-update" folder. Be sure to hit the thanks button while your there.
Step 3 Install Oreo
Copy "oreo-update" folder to your SD Card.
Boot to TWRP
I recommend doing a full backup and a wipe before flashing.
Choose install from the TWRP menu and select your SD Card
Navigate to your "oreo-update" folder and flash "HuRUpdater" it will prompt you to hit the volume down button to start the process.
HuRUpdater will flash the update for you. I ended up with three errors which didn't seem to matter.
Reboot and enjoy
Optional Flash TWRP
It may be possible this process relocked your bootloader. So you may need to unlock your bootloader again.
Download the latest version of TWRP from this post. This TWRP wasn't designed for our device but is the closest to a fully working TWRP I could find. DO NOT post any problems or bugs in that post!
TWRP 3.2.1-0
The fastboot commands have changed. The new command is "fastboot flash recovery_ramdisk RECOVERY.img"
If you like this guide please consider hitting the thanks button.

Useful Stuff
As of July 25th 2018 the unlock code application service has ended. You now have to use DC Unlocker to get your unlock code.
How to unlock your bootloader and install TWRP
DC Unlocker download page
How to read Huawei Android phone bootloader code with DC Unlocker
Huawei bootloader unlock tutorial by DC Unlocker
Here is how you install Magsk now

Thanks for the sharing. Could you explain a little more about which parts of the twrp for oreo are not working?

freemannhp said:
Thanks for the sharing. Could you explain a little more about which parts of the twrp for oreo are not working?
Click to expand...
Click to collapse
The only things I have found is it can't decrypt the Data partition and it tries to mount a partition that isn't on the Honor 8. It will wipe the Data partition though. I'm sure it is only a matter of time until someone builds one for our device.

And how lo unlock bootloader? Webpage is unavaliable...

edomali said:
And how lo unlock bootloader? Webpage is unavaliable...
Click to expand...
Click to collapse
Here is a link with some alternative methods. Just follow the unlock bootloader section. Use the other thread for installing TWRP.
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
Edit: Here is a working link to Huawei unlock code request page.
https://hwid5.vmall.com/CAS/portal/userRegister/regbyemail.html

Thanks for sharing,but i think link is wrong,i dont see where can i type imei number

Wanted to wait for ota because I thought I couldn't unlock my bootloader anyway. Recently found out I still had an unlock code on my pc somewhere. If I update with this method, will I still get future OTAs?

edomali said:
Thanks for sharing,but i think link is wrong,i dont see where can i type imei number
Click to expand...
Click to collapse
I seem to be having trouble making it past the registration. I get "system is busy". If I remember correctly you have to register first. Then you can request your unlock code. You might want to try the alternative methods listed.

timwelter said:
Wanted to wait for ota because I thought I couldn't unlock my bootloader anyway. Recently found out I still had an unlock code on my pc somewhere. If I update with this method, will I still get future OTAs?
Click to expand...
Click to collapse
I can't say for sure, but I would think so as long as you have the stock recovery installed. I know that when I flashed back to Nougat this way I was able to get OTA's.

Check this out. It looks like Huawei is giving us the big middle finger.
https://www.xda-developers.com/honor-huawei-bootloader-unlock-page-disappears/
Edit: I guess this isn't anything new but I figure I would share it anyway.

srgrusso said:
I can't say for sure, but I would think so as long as you have the stock recovery installed. I know that when I flashed back to Nougat this way I was able to get OTA's.
Click to expand...
Click to collapse
So if I flash this with hurupdater it'll automatically install the stock recovery again (remove twrp)?

timwelter said:
So if I flash this with hurupdater it'll automatically install the stock recovery again (remove twrp)?
Click to expand...
Click to collapse
Yes. It will flash it back to stock. Although it didn't lock the bootloader for me.

srgrusso said:
Yes. It will flash it back to stock. Although it didn't lock the bootloader for me.
Click to expand...
Click to collapse
Thanks gonna try this tonight.

srgrusso said:
Check this out. It looks like Huawei is giving us the big middle finger.
https://www.xda-developers.com/honor-huawei-bootloader-unlock-page-disappears/
Click to expand...
Click to collapse
This article is actually quite old, isn't it ?

pix106 said:
This article is actually quite old, isn't it ?
Click to expand...
Click to collapse
It is. If you read the comments below someone posted this from Huawei.
https://twitter.com/bang_gogo_/stat...ault#version=10804c0adb9962a677c2c75e13cd1e83

srgrusso said:
It is. If you read the comments below someone posted this from Huawei.
https://twitter.com/bang_gogo_/stat...ault#version=10804c0adb9962a677c2c75e13cd1e83
Click to expand...
Click to collapse
Which seems quite old too

pix106 said:
Which seems quite old too
Click to expand...
Click to collapse
I know it is old news, but I don't think the age of the article matters as much as the fact is that Huawei will no longer be giving out unlock codes. Just about every article you read is from that time period because that is when Huawei made the announcement. I admit I might have missed the bus on this one.

srgrusso said:
I know it is old news, but I don't think the age of the article matters as much as the fact is that Huawei will no longer be giving out unlock codes. Just about every article you read is from that time period because that is when Huawei made the announcement. I admit I might have missed the bus on this one.
Click to expand...
Click to collapse
Today someone posted a new link for a new form, that's funny you post the plder news today too
I don't know if the new form is that new or if it works though

srgrusso said:
I seem to be having trouble making it past the registration. I get "system is busy". If I remember correctly you have to register first. Then you can request your unlock code. You might want to try the alternative methods listed.
Click to expand...
Click to collapse
I don't know either where I should look for the unlock code. I get to this page after I log into my Huawei ID.