Database Users

[Q] Softbricked S4

I have an AT&T S4, with MF3 (I think). After installing safestrap successfully, I couldn't install a custom ROM so I kinda gave up and tried to flash it back to stock. I went all over the xda forums, and I attempted to flash about 3-4 stock ROMS using Odin, but none of them work; I always get the error message: <ID:0/005> FAIL! (Auth)
I attempted to flash the MFR.tar file at http://forum.xda-developers.com/showthread.php?t=2413746 and got the same FAIL! message from Odin.
Can anyone please help me?

Check my thread. ... http://forum.xda-developers.com/showthread.php?t=2573080 u can go back to stock MF3 using Odin with MF3.tar files.....and then if u decide to update to MK2 follow second post for guide. .... If u ever brick from MK2 follow third post to unbricked from gtj0 guide method that I edited and replace with MF3> MK2 update. Zip files from first post (OP).... goodluck. ..... Hope this help.. ... If I helped u ..... Hit Thank button. ...
Swyped from MK2 Deadly Venom SS

ted77usa said:
Check my thread. ... http://forum.xda-developers.com/showthread.php?t=2573080 u can go back to stock MF3 using Odin with MF3.tar files.....and then if u decide to update to MK2 follow second post for guide. .... If u ever brick from MK2 follow third post to unbricked from gtj0 guide method that I edited and replace with MF3> MK2 update. Zip files from first post (OP).... goodluck. ..... Hope this help.. ... If I helped u ..... Hit Thank button. ...
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
I really appreciate your response! You're the only one who's reached out to me (in my desperate hour of need) and I'm thankful!
I checked your thread, downloaded Odin and MF3.tar files. I tried to flash the MF3 files onto my phone using Odin, but got the following error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
As you can see, I'm still having that weird FAIL error. Any ideas what to do?

I went to Best Buy, and they said that it was permanently bricked. I feel so stupid. Anywhere I can sell a bricked phone?
Someone also suggested I install a custom recovery, but since it's bootlocked, I have no idea how to. Is it possible to install a custom recovery on an AT&T phone via Odin?

pwn4g3n3ss said:
I went to Best Buy, and they said that it was permanently bricked. I feel so stupid. Anywhere I can sell a bricked phone?
Someone also suggested I install a custom recovery, but since it's bootlocked, I have no idea how to. Is it possible to install a custom recovery on an AT&T phone via Odin?
Click to expand...
Click to collapse
Are u sure that u have MF3 firmware ... Since u said .... "I think" .....PM me for more help. ... Maybe I can help u........:good:
EDIT: CHECK YOUR PM>>>>>U SHOULD BE OK>>>>>LET ME KNOW HOW IT GO........
Swyped from MK2 Deadly Venom SS

Bricked by flashing wrong bootloader with Odin

it seems to be that I did it totaly wrong when flashing my phone. I get a bootup: "Firmware upgrade encountered an issue." bla...
What did happend:
I had a custom rom from here (Android 4.3): "PACman v4.3 Build 1 nightly 20130909".
My baseband version was (as far as I can remember): XXUBMF8
I wanted to update to 4.4.2 and at first I tried to update the bootloader and modem with Odin 3.09
For bootloader I used this:
BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_C ERT.tar.md5
For modem I used this:
I9505XXUFNC9_GSM_LTE_Modems.tar
The flash with Odin was succesfull and it restarted. Unfortunately I coulnd find any changes in the settings windows under Android. There was still the old version under baseband (I think XXUBMF8) which was strange for me becaue of the flash. I also checked the baseband with a baseband checker tool and it was the same old version. I trayed the flash process a several time and it was always succesull but with no change in the settings.
Anyway, I flashed than a custom rom:
I9505_Omega_v28_XXUFNC9_md5_7C1D639DBBE5C01FE689DA F3B82406AC.zip
FLash was succesfull and Android started.
Under settings, still old baseband: XXUBMF8.
So I decided to update this (this was my first big mistake)..
I used Odin and flashed again the bootloader
BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_C ERT.tar.md5
And from here I get the error message "Firmware upgrade encountered an issue."
Than - maybe my second big mistake - I tried to flash a stock rom to reset my phone. but I used an downgraded version...
[rom]i9505][xxubmf8][4.2.2] (24.06.2013)
I check also during the flashing process with odin "re-partition" and used the pit file and the 4 other files of this firmware. the flash process didnt go to the end, it interrupted. maybe because of the repartition, it goes more and more wrong...
I can still enter the download mode. But what should I try to flash now?
Is it possible to unbrick in my situation...?
And should I use the pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" or should I leave it (just use the firmware?)
Should I use 1-file or 3-file version for odin?
I would appreciate your help a lot. I need the phone for work tomorrow. It is very important for me. Sorry to hustle and thank you very very much!

tried to flash I9505XXUFNAD. added pit file + 4 files (bl, ap, cp, csc) to odin. but I cant run the flash till the end.
without the pit file it doesnt want to start. i used "CSB_signed_Fusion3_EUR_0325_V2.pit" as pit file.
this is my error log...:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXX_I9505OXXFNA2_549230_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!

ok...
after hours of searching....: changed the usb slot.... than it managed to flash....

help !samsung note 4 sm-n910f impossible to update via odin, recovery mode

HELLO TO ALL i have big problem with samsung SM-N910F, it doesn't go in recovery mode.
i have tried many time to use odin and go in download mode.
when i go in download mode it shows to me:
ddi: mmc*_ read failed
odin mode high speed
product name: sm-n910f
current binary: samsung official
system status: custom
reactivation lock: off
knox on void: 0x0
qualcomm secureboot: enable csd
vds: start.
i have tried with kies, with smart switch but nothing...
who can help me..
i have tried many times and many firmware...but it shows to me: fail (with odin)
for example this is one log...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/026> Odin engine v(ID:3.1101)..
<ID:0/026> File analysis..
<ID:0/026> SetupConnection..
<ID:0/026> Initialzation..
<ID:0/026> Set PIT file..
<ID:0/026> DO NOT TURN OFF TARGET!!
<ID:0/026> Get PIT for mapping..
<ID:0/026> Firmware update start..
<ID:0/026> SingleDownload.
<ID:0/026> aboot.mbn
<ID:0/026> NAND Write Start!!
<ID:0/026> sbl1.mbn
<ID:0/026> rpm.mbn
<ID:0/026> FAIL!
<ID:0/026>
<ID:0/026> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
in other times ti shows to me in odin a problem with pit...i do not remeber exactly....so please i'd like to have a smartphone that works fine...i'm not interested to last android 6 and other one..but i like to use this phone...please help me...
thank you...

Samsung Tab A SM-T585 stuck in emergency recovery mode

A friend forgot the pattern of his tab A sm-t585 and I tried to flash the 7.0 firmware through odin but odin stopped responding and closed before the flash could complete and now the tab is stuck in emergency recovery (a blue screen with an exclamation mark in a triangle with the message "An error has occurred while updating device software. Use the Emergency recovery function in the Smart Switch PC software).
1. I've tried using smart switch software but the tab doesn't show in the list.
2. I tried Kies, and it was the same.
3. I tried older version of Smart Switch and use firmware upgrade and initialization, download was stuck at 69% and the after a period of time changed to 85% and the to 0%, left it overnight and it remained unchanged.
4. I tried odin again, it gave an error (couldn't establish connection)
UPDATE: I just tried odin again and this is the log.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Pls, is there something I'm missing?

gemer45a said:
A friend forgot the pattern of his tab A sm-t585 and I tried to flash the 7.0 firmware through odin but odin stopped responding and closed before the flash could complete and now the tab is stuck in emergency recovery (a blue screen with an exclamation mark in a triangle with the message "An error has occurred while updating device software. Use the Emergency recovery function in the Smart Switch PC software).
1. I've tried using smart switch software but the tab doesn't show in the list.
2. I tried Kies, and it was the same.
3. I tried older version of Smart Switch and use firmware upgrade and initialization, download was stuck at 69% and the after a period of time changed to 85% and the to 0%, left it overnight and it remained unchanged.
4. I tried odin again, it gave an error (couldn't establish connection)
Pls, is there something I'm missing?
Click to expand...
Click to collapse
Hi. Check your installed drivers on Windows. Maybe reinstall. Check usb-cable and connection . Maybe need to change. And try Odin again.

repey6 said:
Hi. Check your installed drivers on Windows. Maybe reinstall. Check usb-cable and connection . Maybe need to change. And try Odin again.
Click to expand...
Click to collapse
I've installed the drivers and whiles updating the Smart Switch software in installed the drivers again.
Update: I just tried odin and this is the results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

gemer45a said:
I've installed the drivers and whiles updating the Smart Switch software in installed the drivers again.
Update: I just tried odin and this is the results:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What the firmware you flash? BL , AP, CP , CSC - yes?
All screenshots please.

repey6 said:
What the firmware you flash? BL , AP, CP , CSC - yes?
All screenshots please.
Click to expand...
Click to collapse
We're not able to tell the region which the device is from, but I downloaded this "NEE-T585XXU2BQI9-20171106145036" I think it's UAE. I only loaded AP.
Screenshot attached

gemer45a said:
We're not able to tell the region which the device is from, but I downloaded this "NEE-T585XXU2BQI9-20171106145036" I think it's UAE. I only loaded AP.
Screenshot attached
Click to expand...
Click to collapse
Why not all ? Odin settings : ticked checkbox "auto-reboot" and " f.reset-time" yes?

repey6 said:
Why not all ? Odin settings : ticked checkbox "auto-reboot" and " f.reset-time" yes?
Click to expand...
Click to collapse
Ok, then I'll load all and try. Yes "Auto Reboot and F.reset-time" checked.
So after selecting it all it's stuck at initializing. Here's the log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
Click to expand...
Click to collapse

gemer45a said:
Ok, then I'll load all and try. Yest "Auto Reboot and F.reset-time" checked.
So after selecting it all it's stuck at initializing. Here's the log:
Click to expand...
Click to collapse
Your internal memory is corrupt. You need to try in recovery mode do wipes: Wipe data/factory reset>>Wipe cache Partition . Then try flash via Odin again. If not success in Odin tick checkbox "Nand Erase All" else and flash again.

repey6 said:
Your internal memory is corrupt. You need to try in recovery mode do wipes: Wipe data/factory reset>>Wipe cache Partition . Then try flash via Odin again. If not success in Odin tick checkbox "Nand Erase All" else and flash again.
Click to expand...
Click to collapse
Thanks for your reply, I'm not able to power on the device at all. It only turns on when I connect the cable so I'll try the "Nand Erase All" option with Odin.
I've checked the "Nand Erase All" option in Odin and from 7:40pm GMT yesterday till now, it's stuck at initialization. Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse

gemer45a said:
Thanks for your reply, I'm not able to power on the device at all. It only turns on when I connect the cable so I'll try the "Nand Erase All" option with Odin.
I've checked the "Nand Erase All" option in Odin and from 7:40pm GMT yesterday till now, it's stuck at initialization. Here's the log:
Click to expand...
Click to collapse
Sorry but in this case your problem have hardware propeties. Perhaps damaged flash memory contacts. Need SC.

repey6 said:
Sorry but in this case your problem have hardware propeties. Perhaps damaged flash memory contacts. Need SC.
Click to expand...
Click to collapse
I'm not able to boot into recovery but I've managed to get it into download mode but still stuck at initialization. The samsung service contact is quite expensive (GHS 350) but might be the only option now.

gemer45a said:
I'm not able to boot into recovery but I've managed to get it into download mode but still stuck at initialization. The samsung service contact is quite expensive (GHS 350) but might be the only option now.
Click to expand...
Click to collapse
Post a screen shot of odin when attempting to flash the firmware.
You may need the PIT file and repartition to repair this device.

ashyx said:
Post a screen shot of odin when attempting to flash the firmware.
You may need the PIT file and repartition to repair this device.
Click to expand...
Click to collapse
Thanks for the reply, I've attached the screenshot of the Odin when attempting to flash the Tab A. It stays at initialization for about 8 hours. I've searched for the Pit file with no results. I've attached a screenshot of the files I have as well.

gemer45a said:
Thanks for the reply, I've attached the screenshot of the Odin when attempting to flash the Tab A. It stays at initialization for about 8 hours. I've searched for the Pit file with no results. I've attached a screenshot of the files I have as well.
Click to expand...
Click to collapse
Are you certain you are in download mode? What do you see on the screen?
If you are then the first thing to try is swapping the USB cable, preferably for the stock Samsung cable.
Being stuck at initialization is a communication error between device and PC. This is either the device is not in Download mode, bad USB cable or problem with the USB port on either device or PC.
Also make sure the PC and ODIN is in Admin mode.

ashyx said:
Are you certain you are in download mode? What do you see on the screen?
If you are then the first thing to try is swapping the USB cable, preferably for the stock Samsung cable.
Being stuck at initialization is a communication error between device and PC. This is either the device is not in Download mode, bad USB cable or problem with the USB port on either device or PC.
Also make sure the PC and ODIN is in Admin mode.
Click to expand...
Click to collapse
Yes, I'm in download mode. I see the download sign at the center of the screen and something written at the top left corner of the screen.
I have tried different cables and port and The PC and Odin is in admin mode

gemer45a said:
Yes, I'm in download mode. I see the download sign at the center of the screen and something written at the top left corner of the screen.
I have tried different cables and port and The PC and Odin is in admin mode
Click to expand...
Click to collapse
Try removing the md5 extension.
Apart from trying another PC there's is not much else to suggest except download the files again or try a different odin version.

If the device is actually stuck in emergency recovery mode and not just download mode, then Samsung Smart Switch PC App is specificially designed to fix the emergency firmware restore.
We have ODIN. Samsung has Smart Switch. It's like ODIN 7.0. Smart Switch even uses the same ODIN Firmware. ODIN is just their base communications protocol.

Hi Guys, i have the same problem. Update went wrong and now stuck at blue screen. Smart Switch says the tablet is not supported. In odin, same problem as above. Is there any recent solution to this problem?

legend999C2A said:
Hi Guys, i have the same problem. Update went wrong and now stuck at blue screen. Smart Switch says the tablet is not supported. In odin, same problem as above. Is there any recent solution to this problem?
Click to expand...
Click to collapse
Just reboot to download mode and go again.

ashyx said:
Just reboot to download mode and go again.
Click to expand...
Click to collapse
I can't go into download mode. Power button doesn't work and it only goes on when i connect the usb cable with the message to connect to smart switch. I already tried charging it.

SM-J730F (stuck in bootloop) black screen

At first, I would like to apologize if I made a mistake in publishing because this is my first time.
I have a big problem with my phone so I can't even enter the recovery i stuck in bootloop with black screen but i have access to download mode ... a few days ago I installed root for the device with twarp modified recovery, Then after that I wanted to delete the root and delete twrp but installed the original recovery version When I open the device I was given this message , binary Blocked by FRP Lock, I did not know what it meant, so I downloaded last version of firmware to my sm-j730f and enterd recovery mode and i did wipe to factory and cach after that i found that the recovery mode I can no longer access it again And get this message every time i try to enter recovery mode , Kernal rev cheack fail Device:4 Binary1 , and every time i try to install firmware odin give me <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2966 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you help me

I guess you can access download mod? I fear you are trying to flash a wrong firmware for your device. Download the correct firmware for your device from sammobile. (The last worked firmware for your phone or the latest one). Now flash it with Odin..

nithambu said:
I guess you can access download mod? I fear you are trying to flash a wrong firmware for your device. Download the correct firmware for your device from sammobile. (The last worked firmware for your phone or the latest one). Now flash it with Odin..
Click to expand...
Click to collapse
u r right bro i did actuly , i was trying to flash file with u4 and i should flash u6 and i did it .... and everythings okey now

AB DoO said:
u r right bro i did actuly , i was trying to flash file with u4 and i should flash u6 and i did it .... and everythings okey now
Click to expand...
Click to collapse
That's a happy news...I guessed it..your bootloader was the issue..you can't downgrade to a lower version from u6 binary.. Now install twrp and magisk for root..magisk is stable root.

nithambu said:
That's a happy news...I guessed it..your bootloader was the issue..you can't downgrade to a lower version from u6 binary.. Now install twrp and magisk for root..magisk is stable root.
Click to expand...
Click to collapse
thak u so much again bro, can u tell me how i can root my device correctly and how to adopt sd card with my android 9 pie

You can search in XDA for the guides as I cannot share links here. Flash TWRP (i use twrp by Ananjasser xda,)using Odin.Before that be sure to enable OEM unlock and USB debugging in developer option .After flashing twrp, go directly to twrp without rebooting your phone, flash magisk, no opt variety script and RMM bypass at the end. Clear cache,dalvik and reboot.done!

nithambu said:
You can search in XDA for the guides as I cannot share links here. Flash TWRP (i use twrp by Ananjasser xda,)using Odin.Before that be sure to enable OEM unlock and USB debugging in developer option .After flashing twrp, go directly to twrp without rebooting your phone, flash magisk, no opt variety script and RMM bypass at the end. Clear cache,dalvik and reboot.done!
Click to expand...
Click to collapse
Hello, I have same problem. My Samsung j7 Max MT6757T just went dark when I tried to flash a stock ROM. Now, it cannot respond at all crying::crying::crying:. SOmeone help!!

Collinsaraf said:
Hello, I have same problem. My Samsung j7 Max MT6757T just went dark when I tried to flash a stock ROM. Now, it cannot respond at all crying::crying::crying:. SOmeone help!!
Click to expand...
Click to collapse
can u tell me what is the number next to Letter B in your download mode and your phone model and i will tell u how i solved my problem clearly

Hello, I cannot get into Download mode. The phone is Hard Bricked. It needs scatter file and image file. Please check the phone specification above. If u have the same, please make me a scatter file
---------- Post added at 06:51 PM ---------- Previous post was at 06:49 PM ----------
My phone is Samsung j7 Max sm-g615f/ds MT6757T

Collinsaraf said:
Hello, I cannot get into Download mode. The phone is Hard Bricked. It needs scatter file and image file. Please check the phone specification above. If u have the same, please make me a scatter file
---------- Post added at 06:51 PM ---------- Previous post was at 06:49 PM ----------
My phone is Samsung j7 Max sm-g615f/ds MT6757T
Click to expand...
Click to collapse
bro i,m not developer but i would tell u how i solved my problem but now your problem is deffrent u should post about your problem and the developers will help u i,m sure and i hope u get your soulvation soon GL <3

I have posted with no answers