Phone goes back to huawei eRecovery - Huawei P9 Lite Questions & Answers

Hi there,
First of all, lemme tell what i did.
Phone model : Huawei p9 lite VNS-L31 ( Dual Sim )
I downgraded my p9lite to andriod 6.0
After that, i unlocked the bootloader, unlocked my Phone etc and installed TWRP.
Phone was still working at this point. Installed the magisk root and Phone still worked.
main reason i wanted to root is to spoof at pokemon go ( yeah it sounds silly, but it is ).
In order to make it work i had to do some stuff, heres a copy paste from the website i followed the tutorial from :
* Step 5- Download a GPS Spoofing app of your choice. I prefer GPS Joystick but I have had great success with Fake GPS Floater. HERE is a known working GPS Joystick apk from my phone to use instead of converting the app over.
Download Service Disabler
Download a root file manager. I use root explorer but I believe its a paid only app, give Root Browser a try from HERE.
Download GPS Test app from HERE
Now its time to convert your spoofing app to a system app. If you downloaded my apk open your root explorer and copy/paste the apk to /system/priv-app and select the file and change permissions to 644 (all read selected and owner write selected), skip the rest of these steps below. If you downloaded from the Play store Open up your root explorer and navigate to /data/app and find the gps spoofing app that you installed and select the entire folder and cut it to /system/priv-app. Now go into the folder that you just moved and delete everything but the apk, All odex files and folders must go. Now long press highlight the apk and change permissions of the file to 644 (all read selected and owner write selected). Back out to the folder that the apk is in and do the same but set permissions to 755 (all read, owner write, and all execute).
Next up is Service Disabler, open the app and go to the system tab, search for location, open fusedlocation and disable it (samsung owners need to do the same for Samsungfusedlocation), search again for google and select google play services, navigate down to fusedlocation and disable it.
Next open GPS Test and go to hamburger menu, AGPS and select clear only.
Reboot to recovery and select wipe, advanced, select dalvic cache and cache. swipe to wipe and then reboot. Boot up time will take a few minutes to optimize all apps.
I followed the steps verry carefully.
My Phone starts to huawei logo, it stays on the logo and it goes to the Huawei eRecovery.
any suggestions?

Restart your phone by holding power button (Hold it until it vibrates).
try this 20 times for example , till it boots into system

FunnkyHD said:
Restart your phone by holding power button (Hold it until it vibrates).
try this 20 times for example , till it boots into systen
Click to expand...
Click to collapse
Tried it, but it does not boot.

solvathus said:
Hi there,
First of all, lemme tell what i did.
Phone model : Huawei p9 lite VNS-L31 ( Dual Sim )
I downgraded my p9lite to andriod 6.0
After that, i unlocked the bootloader, unlocked my Phone etc and installed TWRP.
Phone was still working at this point. Installed the magisk root and Phone still worked.
main reason i wanted to root is to spoof at pokemon go ( yeah it sounds silly, but it is ).
In order to make it work i had to do some stuff, heres a copy paste from the website i followed the tutorial from :
* Step 5- Download a GPS Spoofing app of your choice. I prefer GPS Joystick but I have had great success with Fake GPS Floater. HERE is a known working GPS Joystick apk from my phone to use instead of converting the app over.
Download Service Disabler
Download a root file manager. I use root explorer but I believe its a paid only app, give Root Browser a try from HERE.
Download GPS Test app from HERE
Now its time to convert your spoofing app to a system app. If you downloaded my apk open your root explorer and copy/paste the apk to /system/priv-app and select the file and change permissions to 644 (all read selected and owner write selected), skip the rest of these steps below. If you downloaded from the Play store Open up your root explorer and navigate to /data/app and find the gps spoofing app that you installed and select the entire folder and cut it to /system/priv-app. Now go into the folder that you just moved and delete everything but the apk, All odex files and folders must go. Now long press highlight the apk and change permissions of the file to 644 (all read selected and owner write selected). Back out to the folder that the apk is in and do the same but set permissions to 755 (all read, owner write, and all execute).
Next up is Service Disabler, open the app and go to the system tab, search for location, open fusedlocation and disable it (samsung owners need to do the same for Samsungfusedlocation), search again for google and select google play services, navigate down to fusedlocation and disable it.
Next open GPS Test and go to hamburger menu, AGPS and select clear only.
Reboot to recovery and select wipe, advanced, select dalvic cache and cache. swipe to wipe and then reboot. Boot up time will take a few minutes to optimize all apps.
I followed the steps verry carefully.
My Phone starts to huawei logo, it stays on the logo and it goes to the Huawei eRecovery.
any suggestions?
Click to expand...
Click to collapse
As far as i noticed, on a huawei p9 lite you can't disable a system module, such the fused location module. I know, I did this mistake by myself time ago for the same purpose as yours and i did'nt find a solution. Another strange thing is that after the wipe data and th magisk reflash (reinstall) the safetynet test won't pass. That's strange..

Related

Google play force close help!

Hi, i have rooted my kindle fire recently ( i had to do it manually because the KFU failed to root it) and installed the google framework and google play APK's manually.
but whenever i try to purchase an app, it force closes. and then it force closes every time after that when i try to open it again. when i go to clear the app data for it it will open again, but will still force close when i try to download an app
i also tried to install the app market version 3.4.4, but that always force closed as soon as i tried to open it
maybe i didnt root it right or maybe its not even rooted? how can you tell if its rooted properly. it als wont let me push anything to /system/. it says its read only or something
Edit: nevermind, i solved it. i had to put the kindle into recovery mode, mount /system/ using clockwork recovery, and then push the vendor.apk and install it while still in clockwork recovery
A little more detail please
robotnikman said:
Edit: nevermind, i solved it. i had to put the kindle into recovery mode, mount /system/ using clockwork recovery, and then push the vendor.apk and install it while still in clockwork recovery
Click to expand...
Click to collapse
I have the same thing going on. Can you elaborate a little more. How did you push it while in recovery? Did you have to make it a zip? I can only find zip files to open and since it isn't a zip I can't find another way to open the file.
Thanks in advance.
guitarwizard89 said:
I have the same thing going on. Can you elaborate a little more. How did you push it while in recovery? Did you have to make it a zip? I can only find zip files to open and since it isn't a zip I can't find another way to open the file.
Thanks in advance.
Click to expand...
Click to collapse
what rom are you using stock rooted
EDIT:Try this thread
DJLamontagneIII said:
what rom are you using stock rooted
EDIT:Try this thread
Click to expand...
Click to collapse
I was using the Stock rooted. I followed the first part of the thread and it didn't work for me so I followed the second part and this is were I get lost:
8 - Under "Path settings" Check the box "Up to Root"
9 - Under "Root settings" Check the box "Root Explorer" Tap "yes" on the popup and tap "allow" on the super user window.
10 - Under "Root settings" check "Mount File System"
11 - now your ready to copy the files. Tap back to go back to the sdcard. Tap "Select" on the top toolbar. Select by taping the three .apks you copied over. Once all three are selected Tap "Copy" on the top toolbar
12 - Tap "Up" on top toolbar. Tap "system". Tap "app" and Finally tap "Paste" on top toolbar.
13 - Reboot your kindle and you should now have the Market working on your kindle.
Root Explorer is not there? hmmm, I must be missing something.
in es file explorer -> settings -> scroll down to the section root options ->
first point is root-explorer -> second point is something with file system -> check both
guitarwizard89 said:
Root Explorer is not there? hmmm, I must be missing something.
Click to expand...
Click to collapse
Assuming you have es file explorer installed just do what b63 said so file explorer will have write permissions on the kindle and drag and drop those 3 apks that were in that link 2nd page into the system/app folder and than reboot.... dont try to install them or anything like that just drop them in the app folder and reboot
Thanks guys I got it. I should have made my name NoobCake. What I was missing was....
I didn't understand that I needed to hit the little system folder next to the back arrow at the bottom of the Kindle to check the Root boxes. Once I found that it went great and Market is working good.
I really appreciate your help and to have it so fast is awesome. You guys ROCK!

How to turn the Droid X into wifi mini tab without crippling your cell radio.

How to turn the Droid X into wifi mini tab without crippling your cell radio.
Requires Root
This write up is to guide people who have moved on to other phones but what to use their good old Droid X for a wifi device. Many people have just frozen or uninstalled the dialer and messaging apps, but this is going to an unnecessary extreme. Other people have used airplane mode, but this is a pain because it also disables your bluetooth and wifi. Sure you can toggle them back on, but this doesn't persist after a reboot. This fix allows you to use airplane mode to disable the cell radio, but not the wifi or bluetooth. The extra benefit is that you still have a fully functional phone if you ever need it as a backup.
Step 1. Download a File Manager from the market that allows browsing as root. I recommend ES File Explorer because its free and has a search function.
Step 2. Open the file manager and go to its settings. Find any settings that allow you to browse as root, navigate to the root of the filesystem, and mount the filesystem as rw (Read & Write). If you get a Superuser prompt, click allow.
Step 3. Navigate to the root of the filesystem. If you see folders like "etc" and "system", you are there.
Step 4. Use the search function to find settings.db. On ES, make sure you are searching the current folder and have the filter set to all files. Enter settings.db as the file name.
Step 5. Copy the settings.db file to your sd card. Note the directory you found it in. Usually /data/data/com.android.providers.settings/databases.
Step 6. Download SQLite Manager from the market. Open and navigate to /sd card and find your copy of settings.db. Click on it.
Step 7. Click on "system" and then long press on the line that says "airplane_mode_radios". Click on update row and edit the value so that it only has the word "cell" in it.
Step 8. Back out to update the file. Re-open it in SQLite Manager and verify your changes. If your changes did not stick, keep trying.
Step 9. Copy the settings.db that you edited on your sd card back to the folder you originally found it in. When prompted to overwrite, allow it.
Step 10. Reboot and turn your wifi on and activate airplane mode. You wifi should stay on. Reboot. Your wifi should come back up right away but airplane mode should still be active.
Edited example settings.db from .605 stock in a zip file. This is not flashable in CWM Recovery! You can use this but it will probably change a bunch of settings back to what they are when you first set the phone up. Better to sbf and then apply this right away before changing any settings.
I just use the app Airplane Mode Wifi which disables data and cell but keeps wifi and bluetooth active.

[Q] Can't login to google accounts

Yeah search 5 pages of it (til my brain exploded)
Alway found same solution that not working for me
Here i have tried
1. Make sure you have a ROOT ACCESS on your Device.
2. Install Root Explorer, Run App, Grant SU Access.
3. Browse root / etc... at the top of your screen you will see mount R/O and mount R/W...
4.Tap mount R/W
5.Look for host file, long press it and open with text editor.
6. just Add # (pound sign) on the first number.
like this:
#74.125.93.113(just one space)android.clients.google.com
Clearing google service framework data
It tell me about gps crap a bit then login then error
And last solution i found is format reset
Not from this website thought so i don't trust it
However
I can't login to it after flashing hyperion 7.x rom + merruk kernel
It was work before now it doesn't work
Yes i have deleted mother of all hosts
I can login to mail application thought but of course it didn't add to playstore.....
very odd, if you can't login, i can't logout
skyhot004 said:
Yeah search 5 pages of it (til my brain exploded)
Alway found same solution that not working for me
Here i have tried
1. Make sure you have a ROOT ACCESS on your Device.
2. Install Root Explorer, Run App, Grant SU Access.
3. Browse root / etc... at the top of your screen you will see mount R/O and mount R/W...
4.Tap mount R/W
5.Look for host file, long press it and open with text editor.
6. just Add # (pound sign) on the first number.
like this:
#74.125.93.113(just one space)android.clients.google.com
Clearing google service framework data
It tell me about gps crap a bit then login then error
And last solution i found is format reset
Not from this website thought so i don't trust it
However
I can't login to it after flashing hyperion 7.x rom + merruk kernel
It was work before now it doesn't work
Yes i have deleted mother of all hosts
I can login to mail application thought but of course it didn't add to playstore.....
Click to expand...
Click to collapse
try flash lates gapps for gb before that flash wipe dalvik cache in advanced menu in cwm

S-Browser (working zip)

When the Verizon S5 first got SS, there was a zip floating around on XDA with the stock browser for the S5. I've been looking and Googling(Googlin?) for it but all the ones I try give me constant fc's.
Anyone have a link or zip of a working version?
jayandare said:
When the Verizon S5 first got SS, there was a zip floating around on XDA with the stock browser for the S5. I've been looking and Googling(Googlin?) for it but all the ones I try give me constant fc's.
Anyone have a link or zip of a working version?
Click to expand...
Click to collapse
Your request is vague, leaving us without a clear idea of what you need. What is wrong with your existing S-browser? For that matter which S5 model and carrier is this for? Are you talking about the SM-G900V on Verizon?
What firmware version do you have? Is your phone rooted? What do you mean when you say "zip"? A zip file is simply a compressed file. Or did you actually mean a flashable zip file which is something different.
You didn't tell us how you tried to install the other S-browser versions.. but the forced closures are usually caused by people failing to wipe cache and data in the settings menu application manager, followed by wiping the phone cache from recovery mode.
.
A cursory Google search suggests that Verizon may not include the necessary S-browser libraries on their phones. Just one more thing that would cause the app to crash. Way to go Verizon. If you have a rooted, Verizon phone then you can install S-browser as follows (or alternate directions here):
Download these two files:
PORTED_S5SBROWSER.7z
libswev8.so
Extract the S-browser files (Sbrowser.apk and SbrowserTry.apk) from the zip to the /system/app/ directory
Confirm that permissions are set to 0644
The three library files (libsbrowser.so, libsbrowser_ext.so, libswev8.so) go to /system/lib/
They require 0644 permissions as well
After rebooting, S-browser will probably work fine for you. But it's good practice to clear the caches, particularly if you had a previous S-browser installation.
Go to the settings menu:
Settings > Applications > Application Manager > All > Internet > Force stop > Clear cache > Clear data > OK
Now go to recovery mode
Confirm that your device is off by removing the battery for a few seconds. Then replace the battery.
Press and hold the volume up, home and power keys at the same time until you see the phone enter recovery mode on the screen
Choose wipe cache from the menu and confirm.
Your phone will then reboot normally. You may see an "Android is updating applications message". This is routine and is just the OS doing a one-time update (rebuild) of your cache.
Enjoy your working S-browser.
.

[TUT] Disable OTA on 4.5.2 + Install GApps

Edit: Sorry for not maintaining this thread for a long time (rl stuff) but after all I really recommend you switching to LineageOS. It's very straightforward, you have full Play Store and Amazon access and a smooth, nice, customizable and clean android. Also you don't have to worry about your device getting incompatible to the Play Store^^ or bricking your device by accidental updates.
Srsly, don't do anything below here. It's old and not supported anymore. Also before doing anything to your tablet: Unlock the Bootloader here
So you finally rooted your Kindle Fire HDX 7/8.9 on 4.5.2
and you want to start using it but remembered that amazons updates kill everything, searched for a method to bypass it and fortunately found this thread.(You Sir are very lucky)
So lets start:
1. How to disable OTA updates
Step 1:
Get a file explorer which has root access (I used ES File Explorer because it was already in the Amazon App Store but every other file explorer should work too)
Step 2:
Browse to /system/priv-app/ and search for DeviceSoftwareOTA.apk
Step 3:
Just rename DeviceSoftwareOTA.apk to whatever you like (Important: After renaming the file mustn't end with .apk)
Step 4:
Profit! You can now access the internet freely without the fear of evil amazon updates
But you want to install apps on your Kindle so
2. How to install Google Play Apps
Step 1:
Aquire the GApps for KitKat. Preferably here
Step 2:
Extract it to your Kindle and copy everything except for PrebuiltGMSCore.apk, META-INF and addon.d in the similar system folder (apps in system/app folder go to system/app folder (the real one))
Step 3:
Install PrebuiltGMSCore.apk manually like you would install any normal apk
Step 4:
Reboot (eventually it takes a bit longer)
Step 5:
PROFIT!!!! You have a fully working Play Store!
Obviously i don't take any responsibility if anything goes wrong (even though this procedure should be pretty safe)
Just rename DeviceSoftwareOTA.apk to whatever you like
Click to expand...
Click to collapse
You need specify that need to change the extension exactly
Potato_of_Doom said:
Step 5:
PROFIT!!!! You have a fully working Play Store!
Click to expand...
Click to collapse
Worked great but for some reason on my kindle hdx 7" running 4.5.2 when I booted up the SetupWizard came up to select my language and then when I clicked the big arrow it dumped me into the wireless settings screen and I was stuck. I had to eventually remove /system/priv-app/SetupWizard.apk. You might want to recommend users not including this as well on the off chance it causes the same problem I had. After I fixed this I just clicked on the play store and it prompted me to login.
Potato_of_Doom said:
So you finally rooted your Kindle Fire HDX 7/8.9 on 4.5.2
and you want to start using it but remembered that amazons updates kill everything, searched for a method to bypass it and fortunately found this thread.(You Sir are very lucky)
So lets start:
1. How to disable OTA updates
Step 1:
Get a file explorer which has root access (I used ES File Explorer because it was already in the Amazon App Store but every other file explorer should work too)
Step 2:
Browse to /system/priv-app/ and search for DeviceSoftwareOTA.apk
Step 3:
Just rename DeviceSoftwareOTA.apk to whatever you like (Important: After renaming the file mustn't end with .apk)
Step 4:
Profit! You can now access the internet freely without the fear of evil amazon updates
But you want to install apps on your Kindle so
2. How to install Google Play Apps
Step 1:
Aquire the GApps for KitKat. Preferably here
Step 2:
Extract it to your Kindle and copy everything except for PrebuiltGMSCore.apk, META-INF and addon.d in the similar system folder (apps in system/app folder go to system/app folder (the real one))
Step 3:
Install PrebuiltGMSCore.apk manually like you would install any normal apk
Step 4:
Reboot (eventually it takes a bit longer)
Step 5:
PROFIT!!!! You have a fully working Play Store!
Obviously i don't take any responsibility if anything goes wrong (even though this procedure should be pretty safe)
Click to expand...
Click to collapse
do i put <app etc framework lib priv-app> in /system dir
candiflan said:
do i put <app etc framework lib priv-app> in /system dir
Click to expand...
Click to collapse
Yes you can copy everything, just look out for /priv-app/PrebuiltGMSCore.apk (If you try to copy it you'll get a memory error)
@awinston
Thats strange. On my kindle it worked without any issues
Potato_of_Doom said:
Yes you can copy everything, just look out for /priv-app/PrebuiltGMSCore.apk (If you try to copy it you'll get a memory error)
@awinston
Thats strange. On my kindle it worked without any issues
Click to expand...
Click to collapse
Got it thanks
awinston said:
Worked great but for some reason on my kindle hdx 7" running 4.5.2 when I booted up the SetupWizard came up to select my language and then when I clicked the big arrow it dumped me into the wireless settings screen and I was stuck. I had to eventually remove /system/priv-app/SetupWizard.apk. You might want to recommend users not including this as well on the off chance it causes the same problem I had. After I fixed this I just clicked on the play store and it prompted me to login.
Click to expand...
Click to collapse
How did you remove /system/priv-app/SetupWizard.apk
After doing this to get gapps, I am receiving license error when attempting to play amazon instant videos. Any ideas?
Edit: obviously did something to drm as I can't access kindle books either.
Anyone know a way to fix? Thanks
candiflan said:
How did you remove /system/priv-app/SetupWizard.apk
Click to expand...
Click to collapse
Never mind I rename SetupWizard.apk to SetupWizard.apk.old this is what I did
adb shell "su -c 'mount -o rw,remount /system'"
adb shell "su -c 'mv /system/priv-app/SetupWizard.apk /system/priv-app/SetupWizard.apk.old'"
adb shell "su -c 'mount -o ro,remount /system'"
Is there a recommendation on installing the gapps via this method, versus the HDXposed method?
It sounds like this is easier and slightly less risky.
Sent from my KFTHWI using Tapatalk
Potato_of_Doom said:
So you finally rooted your Kindle Fire HDX 7/8.9 on 4.5.2
and you want to start using it but remembered that amazons updates kill everything, searched for a method to bypass it and fortunately found this thread.(You Sir are very lucky)
So lets start:
1. How to disable OTA updates
Step 1:
Get a file explorer which has root access (I used ES File Explorer because it was already in the Amazon App Store but every other file explorer should work too)
Step 2:
Browse to /system/priv-app/ and search for DeviceSoftwareOTA.apk
Step 3:
Just rename DeviceSoftwareOTA.apk to whatever you like (Important: After renaming the file mustn't end with .apk)
Step 4:
Profit! You can now access the internet freely without the fear of evil amazon updates
But you want to install apps on your Kindle so
2. How to install Google Play Apps
Step 1:
Aquire the GApps for KitKat. Preferably here
Step 2:
Extract it to your Kindle and copy everything except for PrebuiltGMSCore.apk, META-INF and addon.d in the similar system folder (apps in system/app folder go to system/app folder (the real one))
Step 3:
Install PrebuiltGMSCore.apk manually like you would install any normal apk
Step 4:
Reboot (eventually it takes a bit longer)
Step 5:
PROFIT!!!! You have a fully working Play Store!
Obviously i don't take any responsibility if anything goes wrong (even though this procedure should be pretty safe)
Click to expand...
Click to collapse
Doesnt work on my Apollo. I downloaded GAPPS 036 (320DPI) and follow your steps. But it doesn't work and I cannot copy phonesky.apk, i have to manually install it. I copied system folder using ES Explorer. Do I have to set permit for files??
Thanks
tuanda82 said:
Doesnt work on my Apollo. I downloaded GAPPS 036 (320DPI) and follow your steps. But it doesn't work and I cannot copy phonesky.apk, i have to manually install it. I copied system folder using ES Explorer. Do I have to set permit for files??
Thanks
Click to expand...
Click to collapse
I had issues when I tried ES Explorer. I used Root Explorer with no issues. Also, make sure to set perms to RW R R to match other files in all the directories.
tuanda82 said:
Doesnt work on my Apollo. I downloaded GAPPS 036 (320DPI) and follow your steps. But it doesn't work and I cannot copy phonesky.apk, i have to manually install it. I copied system folder using ES Explorer. Do I have to set permit for files??
Thanks
Click to expand...
Click to collapse
Did you get an error message?
Notifications not working
Anyone else having problems not receiving notifications? I am not receiving notifications about updates from google play and I am not receiving notifications from apps where they have been enabled. I took a quick look at some test apps on the store and I never receive the notifications through those apps either. Below is a log cat from a test notifications app. I did some reading and it seems to suggest maybe the individual apps are not configured correctly but I will need to keep digging. Will keep digging, just not very familiar with c2dm so wanted to ask.
03-03 11:17:24.787 2024-4230/? I/GCM﹕ GCM message com.firstrowria.pushnotificationtester 0:1425403044280977%c5da679ff9fd7ecd
03-03 11:17:24.797 2024-2024/? W/GCM-DMM﹕ broadcast intent callback: result=CANCELLED forIntent { act=com.google.android.c2dm.intent.RECEIVE pkg=com.firstrowria.pushnotificationtester (has extras) }
03-03 11:17:24.797 937-966/? W/BroadcastQueue﹕ Permission Denial: broadcasting Intent { act=com.google.android.c2dm.intent.RECEIVE flg=0x10 pkg=com.firstrowria.pushnotificationtester (has extras) } from com.google.android.gsf (pid=2024, uid=10003) requires com.google.android.c2dm.permission.SEND due to receiver com.firstrowria.pushnotificationtester/.broadcast.GCMReceiver
Potato_of_Doom said:
Did you get an error message?
Click to expand...
Click to collapse
@riggsandroid: I tried root explorer and set permissions, same results.
@Potato_of_Doom: It closed without message. On the first boot, I can log in my account but after the home screen loading, PlayStore closed without warning. next time playstore close without warning (very fast). It is seem another Google service still working except playstore. I can log in to my play games account and load Clash of clans data without problems.
tuanda82 said:
@riggsandroid: I tried root explorer and set permissions, same results.
Click to expand...
Click to collapse
@tuanda82 I had similar issues when I didn't remember to install the GMS Core apk after moving all files over. Just a thought.
awinston said:
Anyone else having problems not receiving notifications?
Click to expand...
Click to collapse
Discovered a fix. I had to install Xposed and HDXposed. This leads me to wonder whether the technique used to install gapps with HDXposed might not be the better and safer solution if notifications only work with HDXposed. Anyone else have notifications working without HDXposed installed? After looking through the HDXposed code it looks like this is probably the only solution but maybe I am missing something.
candiflan said:
do i put <app etc framework lib priv-app> in /system dir
Click to expand...
Click to collapse
I don't want to confuse anyone, but you really don't want to overwrite the folders, just add files to their corresponding location within their like-named partition directories.
If you are comfortable with adb shell commands, I find it easiest to actually move all the folders from the zip into the data or a newly created system folder & then use batch scripts that take advantage of the * wildcard call, such as *.apk, to change ownership & permission setting to 644 for all files at one time. I don't have time to list it all out all the steps right now, but if you have been playing with adb for a while, you probably already know what I am talking about. You can also do the same thing, live in the system folder, but I personally like to segregate the new files so I can check several & then move them all over at once, after I am confident all the changes were made via the shell commands.
Potato_of_Doom said:
So you finally rooted your Kindle Fire HDX 7/8.9 on 4.5.2
and you want to start using it but remembered that amazons updates kill everything, searched for a method to bypass it and fortunately found this thread.(You Sir are very lucky)
So lets start:
1. How to disable OTA updates
Step 1:
Get a file explorer which has root access (I used ES File Explorer because it was already in the Amazon App Store but every other file explorer should work too)
Step 2:
Browse to /system/priv-app/ and search for DeviceSoftwareOTA.apk
Step 3:
Just rename DeviceSoftwareOTA.apk to whatever you like (Important: After renaming the file mustn't end with .apk)
Step 4:
Profit! You can now access the internet freely without the fear of evil amazon updates
But you want to install apps on your Kindle so
2. How to install Google Play Apps
Step 1:
Aquire the GApps for KitKat. Preferably here
Step 2:
Extract it to your Kindle and copy everything except for PrebuiltGMSCore.apk, META-INF and addon.d in the similar system folder (apps in system/app folder go to system/app folder (the real one))
Step 3:
Install PrebuiltGMSCore.apk manually like you would install any normal apk
Step 4:
Reboot (eventually it takes a bit longer)
Step 5:
PROFIT!!!! You have a fully working Play Store!
Obviously i don't take any responsibility if anything goes wrong (even though this procedure should be pretty safe)
Click to expand...
Click to collapse
There's another way to get working playstore:
You need enough system store to flash gapps by recovery. To get this, change some system apps to user apps (for example by titanium backup). Don't do this with 'really' system apps, but there are many Amazon apps, you can change (for example kindle reader, music, audible). You can still use these apps after change. Then you can flash with twrp a small gapps package.

Categories

Resources