Database Users

stock rom help!

trying to find U8800 V100R001C00B136SP02CUSTC205D001 (Finland Elisa)
to download no links on huawei homepage works so.
need .zip file found a rar but says (bad) when i try to install
getting black screen after my SIM-card provider image dissapears.
thanks in advance

You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.

oh ok, good to know.
problem solved already tried to install older version of miui. the new version was messing with my phone nothing worked with it.
thanks anyway saving this for the future <3 !

katu2006 said:
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
Click to expand...
Click to collapse
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?

morgoth12 said:
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
Click to expand...
Click to collapse
I would advise against resizing the partitions, as it's difficult to restore them in case you need the phone for warranty.
I've sent you a PM with some info, let me know if you need more.

[Q] Blue screen and i am desperate :(

I was only trying to install a new rom but with cwm i deleted everything by mistake, boot etc. After that, when i tried to open phone, it went into blue screen and i connected to pc but there were no files. SO i put
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
files to image file that i created but still cant open.And before deleting everything, i had a problem, in cwm it gave error "cant mount sd card".
I tried to format sd card but it did not.
SO, i cant use internal sd card but i found 8 gb sd card of my brothers, but i dont want to lose his files. SO what can i do now with thhat?

Cursed Chico said:
I was only trying to install a new rom but with cwm i deleted everything by mistake, boot etc. After that, when i tried to open phone, it went into blue screen and i connected to pc but there were no files. SO i put
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
files to image file that i created but still cant open.And before deleting everything, i had a problem, in cwm it gave error "cant mount sd card".
I tried to format sd card but it did not.
SO, i cant use internal sd card but i found 8 gb sd card of my brothers, but i dont want to lose his files. SO what can i do now with thhat?
Click to expand...
Click to collapse
See if you can go to the CWM recovery (volume up+power buttons).
★HUAWEI IDEOS X5 U8800H★

BLUE
what your phone and pc does when you conect the usb cable?

Mahdial said:
See if you can go to the CWM recovery (volume up+power buttons).
★HUAWEI IDEOS X5 U8800H★
Click to expand...
Click to collapse
No, it cant. Only blue screen and pink scree.
socioan said:
what your phone and pc does when you conect the usb cable?
Click to expand...
Click to collapse
When i connect, pc behaves as if i first time connects, tries to find drivers and shows the phone memory only not sd card in my computer.
And it is empty file .
I now put dload(update and update cust apps in it ) to sd card of my brother and put to phone, vool - and + and then now it is installing but after it is completed, i cant still open the phone. What is wrong with that? Do i need imei or what?

if you can see the phone memory only thats a start.
make a folder with name image and i will upload some files to put in
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
download this rom http://www.mediafire.com/download.php?3cs3savi6v79sdu
it is 2.3.5 Gb the on that i run

socioan said:
if you can see the phone memory only thats a start.
make a folder with name image and i will upload some files to put in
Click to expand...
Click to collapse
I can see the memory of it but i could see. Now i am trying to upgrade and i dont know.
When i could see thememory, as you told i made image file and put recovery.img and boot.img(those are original) and 2 more .img files that ic ant remember. BUt despite that, i could not open it. SO i put dload file to sd card and tried but still cant open :/
Now i am doing firmware update, 2 steps. It completed,i am making power on, ideos screen is displaying for 10 seconds then goes to black screen, power off.
I will try your files now.

i am moment i will give you the link with the files to put in to the image folder now i am extracting from my phone.
---------- Post added at 11:06 PM ---------- Previous post was at 11:00 PM ----------
download this zip and copy the image folder to your phone not to sd card http://www.2shared.com/file/pyo8lRCY/image.html

socioan said:
i am moment i will give you the link with the files to put in to the image folder now i am extracting from my phone.
Click to expand...
Click to collapse
>Hey, one hour ago
http://johnnyparanoia.blogspot.co.uk/2012/04/huawei-u8800-firmware-list.html
from here i downloaded the firmware and installed and now i can open the phone. As how i first bought first time. EMpty everything. And i can see 1.02 gb phone and 1.46 gb sd card. I made partition and i can see now it works.
But now i have to change rom to custom rom,CyanogenMod, how is that, what do you suggest?
Superuser apk, cwm apk all gone, i have to install again i think now.

my files is from b528 white light and it is 2.3.5
download my image files and the the b528 white light rom from here
http://forum.xda-developers.com/showthread.php?t=1884741
---------- Post added at 11:13 PM ---------- Previous post was at 11:11 PM ----------
Cursed Chico said:
>Hey, one hour ago
http://johnnyparanoia.blogspot.co.uk/2012/04/huawei-u8800-firmware-list.html
from here i downloaded the firmware and installed and now i can open the phone. As how i first bought first time. EMpty everything. And i can see 1.02 gb phone and 1.46 gb sd card. I made partition and i can see now it works.
But now i have to change rom to custom rom,CyanogenMod, how is that, what do you suggest?
Superuser apk, cwm apk all gone, i have to install again i think now.
Click to expand...
Click to collapse
first you must root
---------- Post added at 11:15 PM ---------- Previous post was at 11:13 PM ----------
socioan said:
my files is from b528 white light and it is 2.3.5
download my image files and the the b528 white light rom from here
http://forum.xda-developers.com/showthread.php?t=1884741
---------- Post added at 11:13 PM ---------- Previous post was at 11:11 PM ----------
first you must root
Click to expand...
Click to collapse
the find a custom rom and read instruction how to install
it will say what version of recovery needs to install it
put the corect recovery.img in image folder and the rom.zip file to your sd

socioan said:
my files is from b528 white light and it is 2.3.5
download my image files and the the b528 white light rom from here
http://forum.xda-developers.com/showthread.php?t=1884741
---------- Post added at 11:13 PM ---------- Previous post was at 11:11 PM ----------
first you must root
---------- Post added at 11:15 PM ---------- Previous post was at 11:13 PM ----------
the find a custom rom and read instruction how to install
it will say what version of recovery needs to install it
put the corect recovery.img in image folder and the rom.zip file to your sd
Click to expand...
Click to collapse
Thank you so much, you are so helpful.

Cursed Chico said:
Thank you so much, you are so helpful.
Click to expand...
Click to collapse
b528 white light is already rooted no need for root and every other custom rom
when i tell you first to root it was for the original rom.

socioan said:
b528 white light is already rooted no need for root and every other custom rom
when i tell you first to root it was for the original rom.
Click to expand...
Click to collapse
Ok.
http://forum.xda-developers.com/showthread.php?t=1527745
I want to upgrade to cyanogenmod, because it seems it is the latest.
1-Check your stock version. If you are on froyo 2.2.* go to step 5 else if you are on official gingerbread 2.3.5 continue to step 2.
2-Given that you are on official 2.3.5 you need to downgrade to stock froyo.
3-Get the latest stock froyo from here and put the dload directory into your sd card.
4-Power off. Press both volume keys and power on. Wait for the update process to finish. Once rebooted wipe data/cache.
5-Get Official CWM from here.
6-Remove the dload folder and boot into pink screen by holding both volume keys and power on.
7-Replace recovery.img with the cwm recovery provided on step 5.
It saysthat. First i should install stock froyo?

Accidentally deleted my wifi.conf file. Pls help!

Hello and Happy New Year,
I made a n00b mistake and accidentally deleted my system/etc/wifi/wifi.conf file when I was trying to move/rename it and the wpa_supplicant.conf files in order to fix my wifi issue.
I'm unable to find this file anywhere. Is there anyone else using the SGH-i337M model handset that can send me theirs?
Please and thank you!

Just flash the latest stock firmware (if it's available) OR do a data factory reset in stock recovery and that should fix it. Of course you might lose everything so make a backup first.

StoneyJSG said:
Just flash the latest stock firmware (if it's available) OR do a data factory reset in stock recovery and that should fix it. Of course you might lose everything so make a backup first.
Click to expand...
Click to collapse
I've already done that. It hasn't shown up after any firmware flashes, stock or custom.
I've also tried just extracting it via the ext4 packages but can't find it.

jayton.okada said:
I've already done that. It hasn't shown up after any firmware flashes, stock or custom.
I've also tried just extracting it via the ext4 packages but can't find it.
Click to expand...
Click to collapse
I'm having a very similar problem in that i think some files from my EFS folder got deleted somehow. I've done the same thing you have and no luck. I found a post once on XDA with a guy who shared his EFS folder but then the post was removed because you then got his IMEI number if you copied all the files over. I would love to get a copy of that zip folder.

xbbdc said:
I'm having a very similar problem in that i think some files from my EFS folder got deleted somehow. I've done the same thing you have and no luck. I found a post once on XDA with a guy who shared his EFS folder but then the post was removed because you then got his IMEI number if you copied all the files over. I would love to get a copy of that zip folder.
Click to expand...
Click to collapse
Why? Flashing someone else's efs partition on your device will brick it.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Why? Flashing someone else's efs partition on your device will brick it.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
the zip file contained the "/efs" folder only, it wasnt his partition.
---------- Post added at 02:57 PM ---------- Previous post was at 02:44 PM ----------
jayton.okada said:
I've already done that. It hasn't shown up after any firmware flashes, stock or custom.
I've also tried just extracting it via the ext4 packages but can't find it.
Click to expand...
Click to collapse
after multiple flashing and reading, i found out that you can only view the EFS folder with a file explorer that supports root (root explorer, root browser, es file explorer...), otherwise it always shows empty.

How to flash OTA update manually?

The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.

Just follow the steps of Firmware finder
1. ckick rom
2. click download
3.click chek MD5
4. click move to DLOAD
5. tunoff device
6. Press ALTOGETHER : Vol UP + Vol DOWN + POWER
wait a few seconds and MUI screen apears to install Firmware

Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.

ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
You can try to unpacked update after point 3 and before point 4 that SJGSM wrote!
Let's me if it's ok now!

ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD

ctibor said:
The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.
Click to expand...
Click to collapse
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen

SJGSM said:
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen
Click to expand...
Click to collapse
I did exactly the same what you wrote. And I flashed the update with the method you suggested. Everything went smoothly - seemingly.
(I am not totally noob, this is the fifth Huawei device I've been handling. My current phone is Huawei P9 Plus and I've put on all the new ROM versions 'by hand' becauce OTA did not come.)
But something was wrong because
a) the update process went through too fast, just a couple of seconds from 0 to 100%.
b) the version number has not changed. I still have BTV-DL09C100B006,
c) the dload folder and the whole extracted package in it were not deleted after the process, remained on the SD card.
So I suspect that only the UPDATE.APP was installed, the rest of the package not. The M3 now keeps working normally but unfortunately there is one problem: the tab lost its 4G (LTE) capability after the update, now the phone radio works only in 3G and/or GSM mode.
You are right, a full ROM flashing is always better, more secure but there is NO full ROM available for this Tab! I've searched the whole net and found only OTAs for the M3. I'd like to get back the normal functionality because I bought the device exactly to have quick access to the internet everywhere.
So I don't know what to do. If you or somebody else could find a full ROM for the device I'd be very grateful!

Problem solved!
Problem solved!
Earlier I tried to update the M3 with HiSuite but there was no package available at that time. Now, after my unsuccessful manual update, I connected the Tab to my notebook again and ran HiSuite. And voilá: now it offered the B009 update.
The install went without problem and now I have BTV-DL09C100B009. The LTE data capability came back, and everything works well so far.
Anyway, thanks to those who tried to help!

I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
---------- Post added at 01:46 PM ---------- Previous post was at 01:44 PM ----------
I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
SJGSM said:
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD
Click to expand...
Click to collapse

P8 Lite bricked, need a solution

Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?

Plikenz said:
Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?
Click to expand...
Click to collapse
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.

persona78 said:
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.
Click to expand...
Click to collapse
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.

Plikenz said:
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.
Click to expand...
Click to collapse
rollback rom fails to flash?
.

persona78 said:
rollback rom fails to flash?
.
Click to expand...
Click to collapse
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....

Plikenz said:
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....
Click to expand...
Click to collapse
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.

persona78 said:
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.
Click to expand...
Click to collapse
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?

Plikenz said:
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?
Click to expand...
Click to collapse
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.

persona78 said:
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.
Click to expand...
Click to collapse
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.

Plikenz said:
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.
Click to expand...
Click to collapse
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.

persona78 said:
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.
Click to expand...
Click to collapse
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?

Plikenz said:
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?
Click to expand...
Click to collapse
Hi!
Doesn´t have a META-INF folder inside the zip?
.

persona78 said:
Hi!
Doesn´t have a META-INF folder inside the zip?
.
Click to expand...
Click to collapse
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?

Plikenz said:
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?
Click to expand...
Click to collapse
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.

persona78 said:
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.
Click to expand...
Click to collapse
Okay, sure, thank you!

bump

Plikenz said:
bump
Click to expand...
Click to collapse
Link to the update.zip you're trying to flash please.

Grazmeister said:
Link to the update.zip you're trying to flash please.
Click to expand...
Click to collapse
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.

Plikenz said:
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.
Click to expand...
Click to collapse
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck

Grazmeister said:
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck
Click to expand...
Click to collapse
Yea, it is dual sim. The last time I tried b895 it said "incompatibility with current version". And the others just don't seem to work. But I will try once more the way you told me.