Hi, I would like to know if I could uninstall TWRP from my Magna H500f and reinstall stock recovery. I am planning on reverting all changes made to my Magna just to make it run as smoothly as I can. I have installed the latest available version of LineAgeOS but I will reinstall the stock Lollipop.
So, could I find and install the stock LG recovery? Thanks.
Related
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
wq0913562 said:
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
Click to expand...
Click to collapse
It depends on the roms you will be using, if you're going to use a bumped ROM then using the latest stock base and flashing twrp though flashify is the cleanest method, but if the ROM you're using isn't bumped you need the jelly bean bootloader and thus should use autorec. Note that you can install bumped ROMs on the jelly bean bootloader but you CAN NOT install non bumped ROMs on the kitkat bootloader. If you are using a bumped setup and flash a non bumped ROM, it will boot loop. If you don't have a BUMPED ROM still on your storage, you will need to factory reset through download mode or fastboot (whichever you have, some flashable bootstacks purposefully break download mode to enable fastboot. I personally prefer download mode, if I can't get to an adb prompt I'd rather just flash a kdz).
wq0913562 said:
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
Click to expand...
Click to collapse
Hey wq.
I very recently installed AutoRec on my D802, which has the latest 4.4.2 KK. It works flawlessly, and I recommend it. I believe the .apk installs TWRP 2.7.0.0, which has worked for me very well, and I have installed at least 15 different ROMs with it so far.
Hello,
thank you very much for your fast and detailed answers.
So, let's assume someone uses AutoRec to install TWRP for the first time on a LG G2, which only installs an old version of TWRP (version 2.7.0.0).
Which TWRP version should one then use to update to the latest version of TWRP?
Would you use the blastagator version from over there:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Or would you use the official version from over there:
http://teamw.in/project/twrp2/197
And how would you install it?
By simply booting into TWRP 2.7.0.0 (provided by AutoRec) and then from there flashing the latest TWRP zip file?
Regards
wq0913562 said:
Hello,
thank you very much for your fast and detailed answers.
So, let's assume someone uses AutoRec to install TWRP for the first time on a LG G2, which only installs an old version of TWRP (version 2.7.0.0).
Which TWRP version should one then use to update to the latest version of TWRP?
Would you use the blastagator version from over there:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Or would you use the official version from over there:
http://teamw.in/project/twrp2/197
And how would you install it?
By simply booting into TWRP 2.7.0.0 (provided by AutoRec) and then from there flashing the latest TWRP zip file?
Regards
Click to expand...
Click to collapse
I wanted to flash cloudy rom which is bumped.
So i straight away used flashify to flash bumped recovery and then flashed the rom..
No autorec needed.
I flashed blastgator's twrp with thermal control.
Hi, I have LG G2 F320S. I have a problem which does not let me flash custom roms via twrp because of security error i get. Im back to stock lollipop now,but i want to install custom rom. I think the real problem is with my twrp, I installed it via autorec and I think that's the issue. I don't even need to try to install custom rom, I install twrp via autorec,then turn my phone to recovery mode and I try to boot my phone again and it says security error,then I flash stock rom and it will happen for me again and again. Can you guys help me find working twrp that doesn't get me a security error. Maybe it's the lollipops boot stack that's getting me this error,maybe i need to downgrade to kitkat and then flash twrp on kk boot stack? thanks for your help.
Hi guys, I've buy the lg g2 d802 just yesterday.
I really want to try miui v7.
So I've downgrade lollipop to kk trough kdz and everything goes fine. now starts the problems.
I cannot find a good tool to root and I use a one click root + twrp that root the phone fine but when it ask me to reboot to download mode, it stuck at finding new port.
but beside that the phone was rooted (i've check that with root checker).
Then I really don't find any tool or guide to install TWRP recovery, and so I have to install autorec for KitKat. that is the only tool that works for me (twrp manager doesn't work).
So I install with twrp miui v7 gtbluesky.
But many apps don't work, such as camera.
Somewhere I've read that autorec for kitkat downgrade the bootloader to JB and miui needs KK bootloader, maybe is this the problem?
can you advice me a good tool for root and install twrp on G2? So I can have KK bootstack and install miui?
thank you a lot in advance and sorry for noob question
RealPsygnosis said:
Hi guys, I've buy the lg g2 d802 just yesterday.
I really want to try miui v7.
So I've downgrade lollipop to kk trough kdz and everything goes fine. now starts the problems.
I cannot find a good tool to root and I use a one click root + twrp that root the phone fine but when it ask me to reboot to download mode, it stuck at finding new port.
but beside that the phone was rooted (i've check that with root checker).
Then I really don't find any tool or guide to install TWRP recovery, and so I have to install autorec for KitKat. that is the only tool that works for me (twrp manager doesn't work).
So I install with twrp miui v7 gtbluesky.
But many apps don't work, such as camera.
Somewhere I've read that autorec for kitkat downgrade the bootloader to JB and miui needs KK bootloader, maybe is this the problem?
can you advice me a good tool for root and install twrp on G2? So I can have KK bootstack and install miui?
thank you a lot in advance and sorry for noob question
Click to expand...
Click to collapse
1. if you on KK use towelroot.
2.use autoreck for KK to install twrp.
3.update twrp with blastagator thermal 2.8.7.3 when installing do a reboot into recovery to boo into new twrp.
if you installing a rom that new KK bootstacks bumped download your variant here.
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
raptorddd said:
1. if you on KK use towelroot.
2.use autoreck for KK to install twrp.
3.update twrp with blastagator thermal 2.8.7.3 when installing do a reboot into recovery to boo into new twrp.
if you installing a rom that new KK bootstacks bumped download your variant here.
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
Click to expand...
Click to collapse
ty but if I install KK bootstack from that link I have a bootloop =( with miui =(
RealPsygnosis said:
ty but if I install KK bootstack from that link I have a bootloop =( with miui =(
Click to expand...
Click to collapse
what recovery version you have?
Hello,
I've installed twrp on my lg g2 802. Using twrp i tried to install lineageos, but on reboot the screen remains black. I see the monitor on but nothing happens. I have to force the reboot. I can still go into recovery but i don't understand where is the problem.
I already tried to wipe everything, and i installed latest nightly of lineageos (no gapps).
Da you have an idea?
I have this same exact problem. I hope a solution is out there!
i installed from a kitkat. Maybe this can be a problem? Should i install lineage from a lollipop?
Flash this
https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
I got LineageOS to work!
It was a long grind of reading various posts on here and looking up other info on google, but I finally got my phone to run LineageOS.
The three things that I think are key are:
Making sure your phone is starting off with kitkat. I wasn't able to root my phone with lollipop. Stumproot, towelroot, and ioroot all didn't work. Once I downgraded to kitkat, I rooted successfully with ioroot.
After getting TWRP, updating it to 3.1.0. I had to first get an older version and then flash 3.1.0
Change the bootloader to kitkat if it isn't on it already. I used Bootloader Changer.
emilio84music said:
i installed from a kitkat. Maybe this can be a problem? Should i install lineage from a lollipop?
Click to expand...
Click to collapse
Yes u need lp bootstacks. Or you can simply get to the stock lollipop using flashtool and then flash lineage os
Thank you for support. Now it works
So i've tried rooting and installing root+TWRP over a script on my lg g2 d802 which sent the phone into a boot loop. Then i downloaded a Stock ROM (i didn't find mine so i just chose one from my country) and flashed it on the phone. I then rooted it with some script i found on youtube IOroot, which worked and and proceeded to install TWRP over AutoRec, which worked aswell BUT i was not able to get back into the system because of the phone boot looping again. I was able to go back to TWRP but not into the system itself. So i just reflashed the phone again.
Does anyone know what my mistake is here? I am pretty new to this. Could it be that because i have a different Stock ROM it doesn't work? Tbh, I don't know if i will destroy it by installing a american Stock ROM on a german phone. I've read a lot of tutorials but many are down and most of them lead to AutoRec or this Auto Script from here.
EDIT: Ok, nevermind. I installed some Stock Lollipop ROM and with that everything was pretty easy. Installed LineageOs 15.1, works great.