Related
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx
Can y get to fastboot ?
im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.
Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme
Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail
errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.
Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)
rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.
keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....
how to stop boot loop ??????
can you provide videos how to stop boot loop ??????
Hello to all here at xda im a new member and im hoping someone can help me,
I recently bought a yotaphone 2 from tinydeals in china and its model
P05-Yota which I think is china model YD-205 or 206
I wanted to upgrade the firmware to the latest firmware and I think I made two big mistakes.
First when I downloaded the yotaflasher software for windows I chose the eu firmware on option 2 and clicked to download it.also I dont think I put usb debugging on my phone.i put my phone into diwnloading mode and connected the phone to my pc.my pc recognised the phone and I clicked on option 1 in yotaflasher to flash mobile.
The flash process started but failed on most of the things it was supposes to get access to, my phone reatarted and now its on constant boot loop which shows the android logo.i can boot phone back into downloading mode but nothink else
I have read that as my phone is in boot loop and can still boot into downloading mode its soft bricked and not hard bricked so im guessing thats good news.
This is my own fault and im not very experienced in all this flashing and I fing yotaflasher hard to understand compared to odin ive used on samsung phones before
Please can anyone help a complete novice to revive his mobile
I would be greatful for any help and instructions and dont know if im allowed to do this on this site so I appologise to moderators if im not, but anyone that can help me get my phone working again I will transfer £20 to their paypal account as I would appreciate this help alot
Im sorry for being a noob and hope to hear from someone soon
Thx
Simon h
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
Good luck !
I appreciate your help
cheynei said:
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
y
Good luck !
Click to expand...
Click to collapse
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
simon121simon said:
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
Click to expand...
Click to collapse
No problem, I think it's the only solution... but you will loose all your data (I bought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
queation about yotaflasher
cheynei said:
No problem, I think it's the only solution... but you will loose all your data (I aboutbought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
Click to expand...
Click to collapse
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
simon121simon said:
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
Click to expand...
Click to collapse
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
usb debugging is the problem
cheynei said:
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
Click to expand...
Click to collapse
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
simon121simon said:
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
Click to expand...
Click to collapse
Yes, I know, don't worry, I bug my phone too - it's why you have, first, to reset your phone... try to put it on recovery mode, it's the only solution (I think).
--> Press the power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, you will see a menu : choose "wipe data and factory reset".
Try several times if that does not work at once.
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down
pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it
Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.
Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.
I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have
I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.
okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you
Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.
Any other suggestions?
mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...
Nope it doesn't work I was trying it already
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
There is 2 way to access recovery menu:
Normal Way:
Step 1) Turn the power off.
Step 2) Hold and Press Volume up + Power Button for about 10 second and release
Step 3) If you see Nokia logo it means failed repeat step 2
Step 4) If you see no command Android logo it means success
Step 5) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 6) You will see recovery menu
Developer Way:
Step 1) In the System->About Phone Tap Build Number Multiple Time to enable developer mode
Step 2) In Developer options enable usb debugging
Step 3) Connect your phone to computer using usb and Allow the access.
Step 4) Download sdk tools from developer.android.com
Step 5) Open adb by cmd and type "adb devices" to detect your phone
Step 6) Then type "adb reboot recovery" to force your phone to reboot and open recovery
Step 7) You should get no command Android logo
Step 8) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 9) You will see recovery menu
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Gonz19 said:
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Click to expand...
Click to collapse
Every zip work on TA-1025/and MENA firmware
Because, internally mena firmware is also TA-1025 and all OTA zips are made and targeted to TA-1025 varient only
So you can even flash OREO FINAL VERSION ALSO
Hit thanks button if you find this useful
Happy flashing
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
IndigoHD said:
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
Click to expand...
Click to collapse
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
sltushar said:
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
Click to expand...
Click to collapse
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
IndigoHD said:
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
Click to expand...
Click to collapse
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
sltushar said:
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
Click to expand...
Click to collapse
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
IndigoHD said:
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
Click to expand...
Click to collapse
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
sltushar said:
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
Click to expand...
Click to collapse
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
Till don't be sad, we are here, finding solutions for you and mate like you
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
When phone is powered off, connect charger and keep pressing volume down +power button. It should take you straight to download mode.
I had exact problem and by coincidence today
Can u see the no cammand page of recovery.
If yes then try pressing both volume up and Power button together. Try again and again it must take you to recovery... If you land in recovery only for once you just have to select the reboot to bootloader option, so the download mode will open then.. then use OST
Im also having the same problem, after oreo stable update in my nokia 6 im not able get into recovery mode. Please someone help!
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
leszczu8023 said:
Im discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use my older PC - it works without any problem
Click to expand...
Click to collapse
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
leszczu8023 said:
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
Click to expand...
Click to collapse
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
Exactly, @minhas729 even i did all the things from my windows 10 fall creator update and though windows 10 is the best OS to flash phones, it rarely ask for phone drivers or anything, everything is pre-installed and you can just go straight to flashing, automatically system updates downloads all required things automatically.
So no need to go back to the old windows OS to flash it. And also its true on the first go, the OST tool gives error and stuck to flashing splash....
All you need it try once again, second time it flashes successfully
minhas729 said:
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
Click to expand...
Click to collapse
Last night i installed oreo stable in my nokia 6 and i wanted to reset and clear cache partition, since i wanted a fresh start. And i tried to go to recovery mode and i was stuck at no command screen and i accidentally did a combination of " press and hold the power button then press the volume up button once". This took my phone to recovery mode from no command screen.
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...
roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA
It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...
Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...
LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )