Related
I have an hd 2 and its a used one when i bought it. So i dont get the original charger. I got a samsung charger @ 5v, 700ma. But when i connect it, the phone shows usb detected. Though its charging, its pretty slow, i think the usb mode makes it. Taking only few 100-300ma only. And the charging takes long. I know htc need 1amp charger. But i cant get it here. So i decided to rip the charger and make some modifications ( like grounding or shorting the data pins- the middle two) . So i need a little help. Any of you guys having an htc original charger pls help me. Howz the data pins connected in the original charger? Are they shorted together or they are open? Or they are grounded? Pls help me those who know abot it. I want to make my charger form usb charging to default charging. It badly needed
send from my hd2 @ miui 1.12.2
That's weird. I've got original Samsung 0.7A charger here and HTC Desire HD does detect it as charger aswell and takes 1A from it. Shortening datapins together does usually convince most of phones that they are connected to wall charger. Maybe it's not the case for HD2.
Samsung Galaxy Phone Rapid Charger Modcheck this thread few under yours... speaking of shorting data pins.
HD2 is same as most, requires 2 data pins to be shorted together (2 inner pins).
Easy mod on most charger units. If charger is a cheap china job, the quoted 700mA figure could be optimistic ... temporary mod it by shorting data pins together & see how it performs ...
But there are 3 pins and not 4. So which ones are the middle?
send from my hd2 @ miui 1.12.2
Can you supply a good picture of this.
showlyshah said:
But there are 3 pins and not 4. So which ones are the middle?
send from my hd2 @ miui 1.12.2
Click to expand...
Click to collapse
Sorry thatz an error. I mean 5 pin and not 4. All the pins are present( which are prsent in data cable)
send from my hd2 @ miui 1.12.2
Maybe this will help ...
Is it microusb?
You're supposed to shorten D+ and D-, but rather in charger. ;P
Mister B said:
Maybe this will help ...
Click to expand...
Click to collapse
Is that micro usb?
send from my hd2 @ miui 1.12.2
Thakz dude
send from my hd2 @ miui 1.12.2
@ mister b and rebelloz ..
Thankz dude. I will click thankx button when i get to pc. Now i am frm phone
send from my hd2 @ miui 1.12.2
Very useful guide as I am facing the same problem. Thanks.
Useful guide i am also facing the same problem...
can anyone confirm if it worked for them? I made an adapter by shorting both data leads, but it didn't work for me. My phone will charge when switched off, but when it's on with both gps and data running, it barely gets enough current to charge the battery. Only my original cable works.
stanburn said:
can anyone confirm if it worked for them? I made an adapter by shorting both data leads, but it didn't work for me. My phone will charge when switched off, but when it's on with both gps and data running, it barely gets enough current to charge the battery. Only my original cable works.
Click to expand...
Click to collapse
What device?
Signalling a dumb charger with MiniUSB (as opposed to MicroUSB) is less standardized. On most MiniUSB devices it's done by shorting pin 4 to pin 5, but it varies.
I could be wrong about this (someone please correct me if I am), but I believe the transformer inside the charger will need physically replacing if you're going to be pulling more current from it. If it's not too much over the charger's rated current it may be ok, but I've burned up more than one of them by hooking it up to something that draws more than what they were designed for.
xHausx said:
I could be wrong about this (someone please correct me if I am), but I believe the transformer inside the charger will need physically replacing if you're going to be pulling more current from it. If it's not too much over the charger's rated current it may be ok, but I've burned up more than one of them by hooking it up to something that draws more than what they were designed for.
Click to expand...
Click to collapse
Depends as part of the reason of the mod is to achieve full power draw of a acceptable rated charger by making the phone think it is connected to HTC charger & thus charge at mains rate of 1A or a little above rather than USB standard of 500mA. Most chargers of reasonable quality will supply 800mA to 1.2A & if you buy wisely a bit higher.
Issue arises on cheap china chargers with false specs that actually only handle 500mA & perhaps 800mA max for short bursts but when these are forced to supply more will fail.
A good quality charger will have no problem supplying full charge to a HTC handset ...
A good example - getting a non-iDevice to pull its full rated charge current from an iPad charger (charger rated 2.1A, but nothing but iDevices will pull any more than 500 mA from it without modifications.)
A good example of cheap Chinese chargers - the "1A" chargers carried by Monoprice. They're good for 300-400 mA at best. You won't burn them out as it's a fundamental current limit setting of the SMPS chip, but the voltage will droop if you try to pull too much out of it. It's the only Monoprice product I've ever been disappointed with.
Originally Posted by stanburn
can anyone confirm if it worked for them? I made an adapter by shorting both data leads, but it didn't work for me. My phone will charge when switched off, but when it's on with both gps and data running, it barely gets enough current to charge the battery. Only my original cable works.
Click to expand...
Click to collapse
What device?
Signalling a dumb charger with MiniUSB (as opposed to MicroUSB) is less standardized. On most MiniUSB devices it's done by shorting pin 4 to pin 5, but it varies.
Click to expand...
Click to collapse
sorry about that, I have the HD2. if I use the replacement cable with both data lines I shorted, it never charges when the phone is running. but if I swap my original cable the phone charges normally.
it's as though it ignores the shorted data lines, or maybe the HD2 doesn't really work that way?
I'm worried because my original cable is beginning to show signs of wear and tear.
Sent from my HTC HD2 using XDA
I tried swapping out the USB cable that came with my nexus 7 with a longer usb cable (still using the same charger though edit: by that, i mean the ASUS charger that came with the N7). It doesn't seem to be charging though, even though it says 'charging' on the screen. When i was using the nexus 7 while plugged in, i actually lost 1% charge after using it for like 30 or so minutes.
I think i grabbed this cable off Ebay. It had no trouble charging my phone. Are there different grades of USB cables or something?
By same charger do you mean the one it came with? The 2 amps charger. Sorry I had to clear that bit up. I think longer cables creates more resistence but I'm not sure if the cable length is significant enough stop charging. I have no idea about grades of USB cables though maybe someone can elaborate on that.
Summerfly said:
By same charger do you mean the one it came with? The 2 amps charger. Sorry I had to clear that bit up. I think longer cables creates more resistence but I'm not sure if the cable length is significant enough stop charging. I have no idea about grades of USB cables though maybe someone can elaborate on that.
Click to expand...
Click to collapse
Yes, the ASUS charger it came with, i plugged in the 6 foot microusb cable i bought off ebay into it.
MFister said:
Yes, the ASUS charger it came with, i plugged in the 6 foot microusb cable i bought off ebay into it.
Click to expand...
Click to collapse
Okay, 6 foot cable doesn't sound excessively long. I have to ask what were you doing on it while charging and what brightness setting was the screen at. Maybe you were draining more power than the charger can provide?
This is pretty common. The stock cable has larger conductors, as I assume other 2 amp chargers come with, and standard cables are sensed somehow and charging current is limited. Try finding a 22awg cable, I think it will work.
I use a USB extender since I don't have any outlets near my bed. I use a cable rated for USB 2.0 and haven't had any problems. I have had problems with cables that aren't. The Motorola USB cables are rated for 2.0 and they all work fine for me with no problems.
burpootus said:
This is pretty common. The stock cable has larger conductors, as I assume other 2 amp chargers come with, and standard cables are sensed somehow and charging current is limited. Try finding a 22awg cable, I think it will work.
Click to expand...
Click to collapse
Thanks, i assume this cable that's 28/24 awg would work?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=8643&seq=1&format=2
I use a cable extender, but I insert the original stock cable into the tablet (not the charger). It appears to recognise that and charge at the correct rate.
I've tried using a usb extender to charge with the asus charger and the Asus USB cable and checking with battery graph it charges much slower compared to using just the Asus cable.
People with eyesight better than mine will see that the micro USB socket has 5 pins and the Nexus looks at the 5th pin to decide what is connected and what the connected device is allowed to do. The pin can be grounded, not connected (floating) or can be connected to ground via I think 3 fixed resistances. Google for USB on the go. I think that is the standard adopted by Asus and the cable doesn't comply.
I'm using a nook 1/2 cable I got with a car charger for the nooktablet
It works and is longer then the stock cable it came with.
Sent from my Nexus 7 using Tapatalk 2
EE here. I just ran into this issue recently, so I'll share what I learned. Grab a multimeter and measure the resistance of the cable. Check all 4 pins just in case one of them is worse than another.
In my case, I had a really horrible USB extension cable. It measured about 4 Ohms. 4 Ohms is low enough for a multimeter to pass a continuity test, but do out the math:
V = I * R
V = 2A * 8 Ohms (4 Ohms on VCC, 4 Ohms back on GND)
V = 16V.
16 volts?? Where does 16V come from? Short answer: It doesn't. If 2A were actually flowing, the USB cable would have a 16V drop across it. It doesn't though, which tells us that 2A is not flowing. 1A is also not flowing, since that would still be 8V.
0.5 Ohms is a good estimate for a MAXIMUM resistance for a USB charging cable. That's a 1V drop at 2A, meaning the phone is only getting ~4V. That explains why the USB cable that comes with the Nexus 7 is so darn short - it comes in at around 0.1 Ohms (or perhaps less, that's about the limit of what I can accurately measure)
Wanted to get a longer USB cable that will work the Asus adapter, any links?
Thanks.
came across this thread while investigating a strange thing in charging my 4400mah extended battery of my s3.
I have a 5v 1A stock samsung charger with an extension cable i was always using to charge my old phones with a less capacity battery (mugen 3200mah)
This night i spent i wasnt ble to get a full charge from 5% to 100% in 8 hours and this sounds more than strange, but yet understandable.
i will try timings with the stock cable without extension and i'll come back...
Little help chaps.
Ok i've just bought this http://www.ebay.co.uk/itm/390566738301
I presumed (not sure if rightly or wrongly) that it would be sufficient to charge my Nexus 4
I'm using an older usb cable I've got to charge it in my car however if i'm using navigation then the battery still decreases.
I've got a funny feeling that the cable is the culprit but i'm not 100% sure.
Is there anyway to monitor how much juice your phone is getting from the charge?
P.S in the battery monitor screen it says AC not USB
Thanks in advance for any help
Stret
Battery monitor widget pro. It monitors the mA that's being used, mV, etc. Maybe the phone is pulling more mA than the charger is supplying.
You need to go into your battery settings/status while your phone is plugged into your car charger.
It will show one of two statuses:
Charging(AC) and Charching(USB)
If it is showing charging(USB), then the phone is detecting a false data connection. This can be solved by taking apart your USB charger and soldering the middle two pins of the USB. These pins are the Data(+) and Data(-) pins. I attached an image of the two Data pins soldered together on the usb charger.
If it is showing Charging(AC), then your USB charger is not pushing enough mA to charge your phone. Most cheap car USB chargers are in the 500 mA to 700 mA range. The stock USB wall charger that comes with your Nexus 4 is 5V 1200mA.
t989BeLikeItDo said:
You need to go into your battery settings/status while your phone is plugged into your car charger.
It will show one of two statuses:
Charging(AC) and Charching(USB)
If it is showing charging(USB), then the phone is detecting a false data connection. This can be solved by taking apart your USB charger and soldering the middle two pins of the USB. These pins are the Data(+) and Data(-) pins. I attached an image of the two Data pins soldered together on the usb charger.
If it is showing Charging(AC), then your USB charger is not pushing enough mA to charge your phone. Most cheap car USB chargers are in the 500 mA to 700 mA range. The stock USB wall charger that comes with your Nexus 4 is 5V 1200mA.
Click to expand...
Click to collapse
Yeah it definitely shows AC was the first thing I checked, so what your saying is that link o posted above is actaully a false claim to how much power it knocks out?
Stret
Stretlow said:
Yeah it definitely shows AC was the first thing I checked, so what your saying is that link o posted above is actaully a false claim to how much power it knocks out?
Stret
Click to expand...
Click to collapse
Hard to say. From my experience, you get what you pay for. A USB charger that cost less than 2 GBP seems unlikely to support the kind of mA throughput that the Nexus 4 requires.
Some ways to check this are to check the power supply and draw through a battery monitoring app, use a different USB cable or the USB cable that came with your Nexus 4, or take apart the USB charger and inspect the hardware to see if it actually is built to support a 2A supply. That last one is a bit of a headache.
Here is an iFixit teardown of a similar USB charger which goes into detail about some of the working parts of a car USB charger.
To quote the final part of the iFixit teardown:
Quite simply, the device is a rebadged 500mA or 750mA USB charger at best. It is NOT 1A capable, despite what the sticker on the body says.
Click to expand...
Click to collapse
Good luck!
t989BeLikeItDo said:
Hard to say. From my experience when it goes about this type of gear is that you get what you pay or. For a USB charger that cost less than 2 GBP it seems unlikely that it would support the kind of mA throughput that the Nexus 4 requires.
Some ways to check this is to check the power supply and draw through a battery monitoring app, use a different USB cable or the USB cable that came with your Nexus 4, or take apart the USB charger and inspect the hardware to see if it actually is built to support a 2A supply. That last one is a bit of a headache.
Here is an iFixit teardown of a similar USB charger which goes into detail about some of the working parts of a car USB charger.
Good luck!
Click to expand...
Click to collapse
Thanks for your help mate
Stretlow said:
Thanks for your help mate
Click to expand...
Click to collapse
No problem! You should try and remember that the Nexus 4 is a pretty sophisticated piece of hardware. I'm not advocating that you go out and spend 20 GBP on equipment, but you don't want to use a cheap generic piece of trash to interface that electrical connection. The build quality of your charger can put your handset at risk to being damaged by electrical shorts and/or heat.
I would liken it to parking your sports car in a cheap parking garage on the bad side of town. Sure, you can do it, but there are risks involved!
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Data pins need shorted together, either in the USB cig plug, or some micro USB cables are this way...
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Thanks
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
mikea3000 said:
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Click to expand...
Click to collapse
It's the Body Glove case from the AT&T store. It was the only one they had at the time, and I didn't feel like waiting to order one so I overpaid in exchange for some piece of mind.
stetsonaw said:
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
Click to expand...
Click to collapse
It's the holder I ordered for my Skyrocket a few years ago. It's a generic adjustable one that fits a lot of different phones with cases. It has fit my SR, GS3, and now my G2, all with cases.
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw.
Click to expand...
Click to collapse
I have a custom 5 inch up angle micro USB cable I ordered from www.usbfirewire.com. It is a very thick wire, thicker than the charging cable the G2 came with. The one in my pic is probably not thick enough for a 2 amp charge.
Here is an interesting article I came across about car chargers:
The Best USB Car Charger
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
Click to expand...
Click to collapse
Spot on. FWIW, the LG OEM cable is 20AWG on the power wires. This is the only viable explanation as I can't get the OEM wall charger to work with any cables I have sitting around (24AWG at best).
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
That's what I'm trying to figure out. I'm tempted to try that Scosche charger, with my thick USB cable. I installed Currentwidget, so I should be ale to see at what rate I'm charging at if I decide to order it.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
EniGmA1987 said:
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
Click to expand...
Click to collapse
I suspect the phone can detect the charger capacity because my OEM LG cable works on both the Apple and Non-Apple ports on the Powergen charger. Since that's the case, the phone doesn't seem to care if the data pins are shorted or not. And the Powergen is advertised as 4.2A total, so 2.1A per port.
kyler13 said:
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
Click to expand...
Click to collapse
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Geekybiker said:
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Click to expand...
Click to collapse
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
The charging issues associated with this phone has been a huge PITA. I've been carrying my stock cable around just so I can charge my phone!!! Subscribed so I can maybe help out with some info...
bova80 said:
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
Click to expand...
Click to collapse
Are you certain that's not just the data side that is 28awg? Very surprised you can pull 1.8A at 28awg.
Sent from my VS980 4G using Tapatalk 4
kyler13 said:
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
Click to expand...
Click to collapse
They are unmarked.
I have seen some comments and reviews that some USB-C cables are dangerous to use on our phones. Mainly the "Amazon Comment" from a Google Engineer who said that a particular USB-C cable could harm the device.
I am looking to buy some cheap Micro-USB to USB-C adapters for my current chargers, does anyone know if they are safe to use?
Is there a thread that has all the tested and confirmed cables, adapters and chargers? Seems this USB-C thing is more confusing than I though it would be.
I think you are better off buying a USB 2.0 Type A to Type C cable instead of a micro USB adapter. This one has been recommended:
http://www.amazon.com/iOrange-E-Braided-Reversible-Connector-ChromeBook/dp/B010VFFSL4/
Something like this is NOT compliant, according to the same Google engineer:
http://www.amazon.com/Adapter-TechMatte®-Convert-Connector-OnePlus/dp/B0151RKYBG/
bummer, I don't need "fast charging" all the time so I'm ok with standard charging speed for the most part. However I certainly don't want to "harm" my device with a cable or adapter that is not properly engineered.
Most if not all of the cables he recommends are around $20 for just a cable. Craziness...
I don't think you will damage the phone, but there's a risk you will damage the other side, i.e. charger or computer port. Now frying a $10 charger is not a big deal as long as you are not setting the house on fire, but frying a computer USB port is a different story ... that's what I'm really worried about.
I love how iOrange raised prices on their cables by $4-5 each. That's a 25% increase since gaining popularity yesterday.
Cares said:
I love how iOrange raised prices on their cables by $4-5 each. That's a 25% increase since gaining popularity yesterday.
Click to expand...
Click to collapse
Been steadily increasing since the engineer made his post. I understand, but on the other hand, I need a cable.
Cares said:
I love how iOrange raised prices on their cables by $4-5 each. That's a 25% increase since gaining popularity yesterday.
Click to expand...
Click to collapse
Good thing I ordered 2 the day the article came out. I thought they would raise prices with all the free publicity they got from the article.
What about those from one +? I bought a couple when they were in Stock
Cares said:
I love how iOrange raised prices on their cables by $4-5 each. That's a 25% increase since gaining popularity yesterday.
Click to expand...
Click to collapse
good enough reason for me to go with a different company. i hate when companies do that.
Rattles said:
good enough reason for me to go with a different company. i hate when companies do that.
Click to expand...
Click to collapse
https://www.monoprice.com/product?c_id=103&cp_id=10303&cs_id=1030319&p_id=13009&seq=1&format=2
If i you don't need 3.0 data speeds, thats the way to go. There is a google doc put together on reddit from all of Google engineer's comments/posts: https://www.reddit.com/r/Nexus6P/comments/3robzo/google_spreadsheet_for_usbc_cables_with_benson/
jsk23 said:
https://www.monoprice.com/product?c_id=103&cp_id=10303&cs_id=1030319&p_id=13009&seq=1&format=2
If i you don't need 3.0 data speeds, thats the way to go. There is a google doc put together on reddit from all of Google engineer's comments/posts: https://www.reddit.com/r/Nexus6P/comments/3robzo/google_spreadsheet_for_usbc_cables_with_benson/
Click to expand...
Click to collapse
Based on the photos, it seems identical to the cable Google sells. Wouldn't be surprised if they both came from the same place.
My question is this: why are people buying all kinds of usb-c to other versions of usb cables? The phone comes with everything one needs to charge or plug into a computer. Unless everyone wants cables for every room in the house...?
Rattles said:
good enough reason for me to go with a different company. i hate when companies do that.
Click to expand...
Click to collapse
wvcadle said:
My question is this: why are people buying all kinds of usb-c to other versions of usb cables? The phone comes with everything one needs to charge or plug into a computer. Unless everyone wants cables for every room in the house...?
Click to expand...
Click to collapse
I leave my stock charger in the living, but I want an adapter for overnight use to plug it in to my 2.4v Nexus 7 charger that stays in my bedroom.
jsk23 said:
I leave my stock charger in the living, but I want an adapter for overnight use to plug it in to my 2.4v Nexus 7 charger that stays in my bedroom.
Click to expand...
Click to collapse
The 6p comes with 2 cables already... One usb-c>usb-c and one usb-c>usb-a... So use the usbc/c cable for home and the usbc/a cable for travel.
Sent from my Nexus 6P using Tapatalk
wvcadle said:
My question is this: why are people buying all kinds of usb-c to other versions of usb cables? The phone comes with everything one needs to charge or plug into a computer. Unless everyone wants cables for every room in the house...?
Click to expand...
Click to collapse
Work, car, etc. I don't want to remember to take the charger/cable with me to work or in the car, I just want to leave them there. And the short cable that comes with the 6P is well ... too short. If you have a desktop computer sitting on the floor or want to charge from the wall or the car, it's just not good enough.
Fair enough!
inneyeseakay said:
The 6p comes with 2 cables already... One usb-c>usb-c and one usb-c>usb-a... So use the usbc/c cable for home and the usbc/a cable for travel.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This has nothing to do with travel. and the c-a cable it comes with is too damn short to use for much beyond data transfer. Unless the USB a charger is literally plugged in right next to where the phone is going to sit.
I'm trying to figure out how this new charging thing works as far as the required cable/charger.
I bought the iOrange-E cable from Amazon. http://www.amazon.com/iOrange-E-Braided-Reversible-Connector-ChromeBook/dp/B010VFFSL4/
I have a charger from my old Galaxy S4 that is 5V-1A. When I plug the iOrange in that charger and to my phone, it will say "Charging" but will not steadily charge. What I mean by that is that it'll change states to charging, then it'll stop charging, over and over again.
Another charger I have is 5 V - 2.1 A. With the iOrange cable, this works fine. It will say "Charging."
I have an Anker car charger. This is the one I have: http://www.amazon.com/gp/product/B00FYQKMRG?psc=1&redirect=true&ref_=oh_aui_search_detailpage
I'm not sure what the V/A is on that but with the included USB C -- USB A cable that was shipped with the Nexus 6P, it will charge.
I don't have the USB specs but does anyone know what the minimum is for simply "Charging"? How about "Charging Rapidly?"
I'm assuming my 5V - 1 A charger is too low since it doesn't seem to charge the 6P properly.
I saw the same thing with an HTC 1.5A charger. It charges for a few seconds and then it stops. Not sure what's going on, you'd think that it could at least pull the 500mA or 900mA per the USB spec. Another Anker charger that I have works.
I have this adapter Delmkin
It passes compatibility test using this app CheckR when hooked up with a tronsmart micro-USB cable.
Somebody mentioned that we have all what is needed inside the box and that's true and all but thing is most people don't want to carry their cables/chargers with them wherever they go. I have at least two charger with cables in each room of the house. One in each car and one at work. Makes it convenient since micro-USB cables/chargers are so cheap. Now with USB-C its a different story. One these cables are not cheap at all and now we are learning most of them aren't even complaint with the specs. So it helps to have a tiny adapter to be able to use all the cable I already own with Nexus 6P.