Does anyone have the original firmware or able to assist me with this. I have downloaded several versions online that say it is the original firmware and tried using Odin but it always fails to write. I have done everything suggested online from changing the ports, downloading latest Samsung Drivers and still keeps giving me the issue so not sure if something is wrong with what I downloaded or what is going on. I am trying to get it back to stock, but it will not allow it even with factory reset it still gives me same issues as freezing, having to keep entering the wi-fi password, a security notice error message that pops up everytime the phone is turned off and on and want go away. Any assistance would be greatly appreciated.
Hi! Did you found it? I need this too! please
Google Verification blocked, I do not know which gmail I had original on the phone. I cannot figure out who's gmail was on, it was created for my father by someone else and we cannot find any information on the account. Samsung Galaxy Core Prime SM-360T1 MetroPCS version. I have tried: resets(currently I have the default stock version that you can get from using SmartSwtich. I have tried the SlideSync method, emergency call method, even creating a call with the Realterm which failed(the phone is not currently connected which may be the issue with that one but I do have a sim card in it. I have also tired using the WiFi method that involves turning off the network that the device is currently connected to during the "check for updates". I have also tried flashing custom builds using Odin. Any advice, methods, places to look, or things to try would be much appreciated. I have been searching for days, and I will continue to search. I am currently trying to do some type of downgrade and then retiring other methods.
Thanks
-Joker
After Downgrade
After downgradeing the slidesync method worked. I have a misspelling on my post it is the SM-G360T1
Admin, sorry, but the suggestions were close, but no cigar...
So I got sick and tired of trying to Google "Google FRP bypass" on Nougat 7.0 (Google got "smart" and hid those?)...
I went through Cellunlocker, and they did a remote desktop connection, downgraded my S6 Edge plus from 7.0 to 6.0.
After they downgraded my OS, they used some tools, like usbredirector.exe and some others, I couldn't see their computer screen... so I don't know what else they used, they managed to bypass the FRP, I was presented with the home screen! Yeah! The download of the OS took a little under an hour, but the bypass took mere minutes. I trust them to unlock, and do FRP bypass.
After that though, I noticed that the 32GB that's supposed to be there, ISN'T.
It is now only 8GB.
I've yet to hear back from them... But, I thought I'd ask here.
I was given a Stock ROM from Poland or something (I've the International model.) It is loaded with the usual bloatware that Samsung and Google hands out. I barely got enough room to sideload Super SU (Google Play wouldn't as the memory requirements weren't met.)
I tried to upgrade to Nougat 7.0 which did work, but I've no idea where the rest of the memory disappeared to.
Factory reset doesn't work, and I tried to free up some space by sideloading system/app/mover, and it fails, stating that "couldn't remount /system."
Has anybody else experienced this issue, and is there a fix for this?
dave68 said:
Admin, sorry, but the suggestions were close, but no cigar...
So I got sick and tired of trying to Google "Google FRP bypass" on Nougat 7.0 (Google got "smart" and hid those?)...
I went through Cellunlocker, and they did a remote desktop connection, downgraded my S6 Edge plus from 7.0 to 6.0.
After they downgraded my OS, they used some tools, like usbredirector.exe and some others, I couldn't see their computer screen... so I don't know what else they used, they managed to bypass the FRP, I was presented with the home screen! Yeah! The download of the OS took a little under an hour, but the bypass took mere minutes. I trust them to unlock, and do FRP bypass.
After that though, I noticed that the 32GB that's supposed to be there, ISN'T.
It is now only 8GB.
I've yet to hear back from them... But, I thought I'd ask here.
I was given a Stock ROM from Poland or something (I've the International model.) It is loaded with the usual bloatware that Samsung and Google hands out. I barely got enough room to sideload Super SU (Google Play wouldn't as the memory requirements weren't met.)
I tried to upgrade to Nougat 7.0 which did work, but I've no idea where the rest of the memory disappeared to.
Factory reset doesn't work, and I tried to free up some space by sideloading system/app/mover, and it fails, stating that "couldn't remount /system."
Has anybody else experienced this issue, and is there a fix for this?
Click to expand...
Click to collapse
Find stock rom with .pit file and flash in odin
I was given stock ROM 6.0, but I don't know if it has the .pit file... How would I know? I use the samtool to get the ROM from Samsung, wouldn't it have it? Please and Thanks again!
Also, does that determine whether or not we have 32GB VS 64GB? Or is there a physical limitation? There must be, but just curious if I load the .pit for a 64GB device, could I be THAT lucky?
Frp bypass Oreo Samsung Galaxy s6 plus
I’m sorry I’m posting to wrong area but I can’t figure out how to post I think I’m having a brain overload Can someone please help me I’ve spent the last three days trying to bypass FRP lock on the Samsung S6 plus for my daughter because she got scammed and got a phone that was in a lock on craigslist I have tried every and all forms where I seem to get stuck each time is downloading the driver for Samsung USB driver it downloads from all the sites but none of them work or show up in my device manager so all the methods are impossible at that point what is it that I’m doing wrong.
The .pit file does indeed determine 32gb or 64gb... without It, 8gb. Also I have a copy of.... wait... is that the S6 Edge +? If so I have original stock with proper. Pit file. If not, you have to keep looking... hope this helps.
Falleninkedangel said:
I’m sorry I’m posting to wrong area but I can’t figure out how to post I think I’m having a brain overload Can someone please help me I’ve spent the last three days trying to bypass FRP lock on the Samsung S6 plus for my daughter because she got scammed and got a phone that was in a lock on craigslist I have tried every and all forms where I seem to get stuck each time is downloading the driver for Samsung USB driver it downloads from all the sites but none of them work or show up in my device manager so all the methods are impossible at that point what is it that I’m doing wrong.
Click to expand...
Click to collapse
I actually have firmware / unlocking software I could probably give you a hand
hello,
i managed to get the phone back to get in download mode. stock everything, no root whatsoever. my goal is to root my phone and i have experience doing so but i guess i was just unlucky this time.
i tried searching allover the internet for a fix, searching xda etc.
first off: my device is running oreo 8.0 and it's type is G950FX.
I want to downgrade to 7.0 because FRP lock is on, i did turn on oem lock before starting however i am unable to log in to my old google account connected to my phone.
when i try to flash any bootloader i get SW REV CHECK FAIL DEVICE 2, BINARY 1. i tried almost any trick in the book like downloading 7.0 from sammobile, flashing using odin.
the things i run into when flashing are:
1.can't flash the bootloader, probably because of frp lock.
2. when i don't flash the bootloader for 7.0 i get dm-verity error 0x2.
3. when i only flash 8.0 oreo pda & csc and then flash 7.0 pda on top i do get to boot but i get encryption interrupted error.
4. i am able to boot in 8.0 but can't get past the frp.
i'm out of answers, i really hope anyone can help me out of this situation as i want to use my phone.
Help is much appreciated!
edit: i tried flashing multiple versions of android 7.0 but i keep getting sw rev check fail bootloader device 2 binary 1
i basicly want to do this, a downgrade: https://forums.androidcentral.com/s...s8-plus/878062-how-downgrade-oreo-nougat.html
the problem is i didn't sign out of google or samsung accounts before resetting to factory
You can't. You have a new bootloader v2.
A simple search gives you this answer, if you have u2 and CRED bootloader installed you are stuck. No way to go back anymore.
i'm on u2 and CRED bootloader. i did search for this indeed but i didn't want to give up.
do you think there will be ever be a way to get back into my phone again?
If you have FRP lock good luck. I haven't seen a way yet.
I know it's been 5 months and you've probably either gotten rid of the phone or it's sitting in a dusty bin somewhere, but have you tried Galaxy Reaper? It's a pretty legit FRP bypass tool.
Edit: Scratch that. It's apparently been patched since I last knew it to work. Just wanted to double check, and sure enough..
I had to factory reset my S8 from AT&T, and when I turned it on, it wanted my email password which I cant remember. So I bypassed the FRP, and when I tried installing a new firmware, I got stuck on the AT&T logo. My problem is that I couldn't find the G950USQSDSE5 firmware that my phone was using online. So I used a different firmware. Can anyone provide me a download link to firmware that will work on my phone, or tell me how to fix this? This is my first time owning a Galaxy phone. In the past, I always had a Nexus so I'm unfamiliar with these phones.