Database Users

Phone restarts back to TWRP even after flashing ROM

So Phone model : a500F
Previous version 5.0.2
Rooted
TWRP 3.0.0.1
I tried flashing many roms like Aryamod, Ressurection remix ( both N & M ) and Lineage OS
The only on that flashed successfully is Lineage but when I try to reboot it restarts back to TWRP
The other roms doesn't flash as it gives Error 7
Any ideas ?

Try v 3.0.2.1. Also go to specific thread and read this has a solution and I think there is no need to create a separate thread for that. There is even a zip that you can flash to get out of the twrp loop as I would call it.

sm-j5nltexx - v. sm-j5nlte

For a few days now i have being trying to install a customer ROM on my Samsung J5, EVERY ROM i have downloaded has failed with errors stating that the ROM is for J5nlte NOT for j5nltexx even if the file name has been relating to j5nltexx.
I have tried to change/remove the assert line in the install package with no success.
has anybody got/or can recommend a ROM that WILL work with samsung J5 (j5nltexx) - I Currently have a phone that will not boot into a ROM, but will happily boot into TWRP 3.1.1-0
***Update***
The CM13 firmware installed and initially booted, but then went into a boot loop at "optimising apps", still unable to successfully install a custom ROM of any sort, tried Skies and ASUX both didn't boot, even with an Aroma aware TWRP install (confirmed by attempting to install CM13)
Since rebuilding with a "greek" factory ROM, my phone is now showing as sm-j5lte anymore advise will be well recieved
Thanks in Advance
PB

pdjbarber said:
For a few days now i have being trying to install a customer ROM on my Samsung J5, EVERY ROM i have downloaded has failed with errors stating that the ROM is for J5nlte NOT for j5nltexx even if the file name has been relating to j5nltexx.
I have tried to change/remove the assert line in the install package with no success.
has anybody got/or can recommend a ROM that WILL work with samsung J5 (j5nltexx) - I Currently have a phone that will not boot into a ROM, but will happily boot into TWRP 3.1.1-0
Thanks in Advance
PB
Click to expand...
Click to collapse
first install a aroma supported recovery then install ASUX or Skies ROM i should boot if it dosent let me me know with the error

I have managed to get a booting phone, using an old Samsung Factory ROM (5.1.1), re-rooted using CF-Auto-Root. Re-installed TWRP (this time with Aroma support) from @Zonic here To be able to install CyanogenMod 13.0 for Galaxy J5 Here do i need to Marshmallow (6.0.1) BEFORE i attempt a firmware upgrade?
Thanks

Tab 4 LTE SM-T535 recognized as matissewifi

SOLVED: TWRP 3.0.3 uploaded by sub77 on androidfilehost doesn't properly recognize devices. I flashed the older 3.0.2-8 and it works fine and let me able to flash matisselte rom. Anyway, I flashed crdroid but It's stuck on boot animation.
Hello everybody,
I recently bought a secondhand Galaxy Tab 4 SM-T535. It has the android stock rom 5.2 and I wanted to flash a CM or any custom rom to speed it up a bit and remove all pre-installed apps. I did flash TWRP through Odin and it works fine, then I copied Gapps for 7.1 pico versión and crDroid custom rom based on LineageOS 14.1 and nougat 7.1 for matisselte aka Tab 4 SM-T535. I followed instructions (that are pretty the same for every custom rom) so I wiped dalvik, cache, system and data, then I flashed (tried to) crDroid 14.1 zip and... TWRP says something like: unable to flash zip, it is for device matisselte but this is matissewifi. Wtf?! So, ok. I thought I'm blind and I got the wrong version, I downloaded the matissewifi version, tried to flash again and it did flash. Then I flashed Gapps and rebooted, now it goes directly in download mode and says Could not boot normally... What is happening? I also tried CM 14.1 for matissewifi, it flashes but can't boot and I'm unable to flash the matisselte version. Why?
it is for sure the LTE tablet, I read it in settings and info in the android stock rom and it has a sim slot, so it can't be the wifi one.
Thank you in advance for any reply. Let me know if you need more informations. Thanks.
P. S. I already searched in the forum and didn't find any similar case.

Hi,
has anybody found a solution...?
seen too late.....
"SOLVED: TWRP 3.0.3 uploaded by sub77 on androidfilehost doesn't properly recognize devices. I flashed the older 3.0.2-8 and it works fine and let me able to flash matisselte rom. Anyway, I flashed crdroid but It's stuck on boot animation. "

So glad you posted this because I had failed in all my attempts and had tried a few TWRP versions but not that one, which worked perfectly with Lineage 14.1.

[Help] Wifi don't start

Hi,
I have a problem on my phone (Asus Zenfone 2 Laser running on rooted android 6) : I can't turn wifi on, when i click on the wifi button it does absolutely nothing...
It happened when I updated from magisk 16 to magisk 17, I got bootlooped due to a bug, after this I flashed the uninstall magisk zip and I flashed magisk 16 again, and it happened at this moment.
I already tried :
Updating to magisk 17.1 (the fixed version)
Power cycling my phone
Restoring a rootless save
(I try to avoid the factory reset but if there's no other solutions I'll do it.)

Need help for reflashing kernel
Yami.Neko said:
Hi,
I have a problem on my phone (Asus Zenfone 2 Laser running on rooted android 6) : I can't turn wifi on, when i click on the wifi button it does absolutely nothing...
It happened when I updated from magisk 16 to magisk 17, I got bootlooped due to a bug, after this I flashed the uninstall magisk zip and I flashed magisk 16 again, and it happened at this moment.
I already tried :
Updating to magisk 17.1 (the fixed version)
Power cycling my phone
Restoring a rootless save
(I try to avoid the factory reset but if there's no other solutions I'll do it.)
Click to expand...
Click to collapse
Hi again,
Update : I learnt on the magisk wiki that this issue can be solved by reflashing the kernel.
So if anyone can help me to reflash my actual kernel/a new one compatible with my ze500kl, aka Zenfone 2 laser. (My actual kernel is "3.10.49-perf-gcb6a1aa")
Thanks in advance !

Hi again,
I tried to flash the image of my original firmware's zip (found in this zip from the official Asus website)
http: //prntscr.com/kpoq3d
My phone booted normally but I still can't turn the wifi on...
Afterwards I tried to flash the firmeware's zip from twrp, wich didn't worked.
(I also tried to sideload via ADB, wich didn't worked too.)

twrp error 1 when flashing custom roms

Hi everyone,
I wanted to load a custom rom on my op2. I am not using it anymore and it still got cyanogenmod on it. I tried Lineage 18.1 but got "Error 1 - Error installing zip file".
I tried another TWRP version but same results. After that I tried OxygenOS 14 OTA, this one installed fine but i still can't install lineage neither 17.1 nor 18.1.
How can I fix this?

Okay got it working now.
First I had newest TWRP but no rom and got error 1.
Than I tried older TWRP without rom - error 1
Installed stock OS + old TWRP - error 1
updated TWRP + stock os installed and it worked.