Deleted - Galaxy Grand Prime Q&A, Help & Troubleshooting

Deleted

1. Go Into TWRP Recovery Mode By Holding Volume Up, Home & Power and Flash Lineage 14.1 June Version through TWRP after an ADVANCED Wipe of Dalvik Cache, Cache, System, and Data
2. Unlock Developer Tools by Clicking Build
4. Activate USB Debugging
5. Download G530TUVU2AQD1_G530TTMB2AQD1_G530TUVU2AQD1_HOME.tar.md5 or any .md5 file of G530TUVU2AQD1
6. Download CF-Auto-Root-gprimeltetmo-gprimeltetmo-smg530t
7. Install Odin 3.10.6 that comes in the CF Auto Root Zip
8. Open Odin 3.10.6 Run As Administrator
9. Put Phone In Download Mode by Powering Off and Holding Volume Down, Power Button and Home button
10. Enter Download Mode by Pressing Up to Continue
11. Click AP in Odin 3.10.6 and Open The G530TUVU2AQD1 .md5 file
12. Click Start in Odin
13. WAIT FOR ODIN TO UPLOAD THE FILE, IT IS NOT FROZEN, IT IS CHECKING THE MD5
14. After it says Leave CS, Click Start Again
15. WAIT FOR ODIN TO FINISH, IT IS NOT FROZEN, CHECK THE GREEN STATUS BAR AT THE TOP LEFT
16. Let Odin Finish and Let Your Phone Reboot As Many Times As it Needs
17. Go back Into Recovery Mode By Holding Volume Up, Home, Power and Clear the Cache and Factory Reset
18. Reboot
After you finish setup, your device should trigger a software update at some point that will update your 5.1.1 to the newest build which is AQE3 released in June 2017. I chose to root after getting this update.
19. To Root, Go back into download mode and Click AP in Odin and click on the CF-Auto-Root-gprimeltetmo-gprimeltetmo-smg530t.tar.md5 file and let Odin do the rest, you will see text on your phone screen as it completes the Rooting process.

Related

How I manually installed the N7105ZHEML JB 4.3 update with root on my N7105

I had JB 4.3 already installed with root on my N7105, but last month came a new minor update called N7105ZHEML. This is for Hong Kong versions of the Galaxy Note II LTE. This seems a fairly exotic update, as I couldn't find much info about it and I had to scramble from dozens of various sources with more or less success. The update installed without a glitch via Odin, but I couldn't get the phone to re-root nor could I get back to my old NAND backup, as the phone didn't seem to restart properly after a restore. So you can imagine that I got slightly nervous...
Please note that this is for the N7105 (LTE version) and the Hong Kong Version of the latest 4.3 update, called N7105ZHEML.
It might work for other hard or software too, but I can't be sure.
Do everything on your own risk, as you can easily lose all your data or even worse, brick your phone if you don't know what you're doing!
Anyway, here is what worked for me, hope this helps somebody:
Check new N7105 firmware: http://www.sammobile.com/firmwares/1/?model=GT-N7105&pcode=TGY
1. Backup using ROM Manager/NAND
2. Backup using Titanium
3. Download new ROM file, unzip it
4. Open Odin 3.09, Click AP/PDA and choose N7105ZHUENA1_N7105ZZHENA1_N7105ZHEML1.tar.md5
5. Make sure re-partition is NOT ticked
6. Turn off phone, then press Vol Down, Home and Power until boots
7. press Vol Up (Continue)
8. Connect to USB, Odin should turn blue
9. Click Start, wait till phone boots (takes really long time, incl. Media Database update)
10. Do not disconnect until PASSED! shows up in Odin
Install TWRP Recovery:
Check here for updated TWRP: http://teamw.in/project/twrp2/125
1. Open Odin 3.09, Click AP/PDA and choose openrecovery-twrp-2.7.0.0-t0lte.img.tar
2. Make sure re-partition is NOT ticked
3. Turn off phone, then press Vol Down, Home and Power until boots
4. press Vol Up (Continue)
5. Connect to USB, Odin should turn blue
6. Click Start, wait till phone boots
De-Knox, BusyBox and Re-Root with PowerBoxV2:
Check here for updated PowerBox: http://forum.xda-developers.com/showthread.php?t=2651601
1. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots (can be done without booting up after installing TWRP)
2. Remove SD Card, copy Powerbox_v2.zip to root of SD card
3. Install ZIP file from TWRP
4. Run PowerBox, choose only first option (DeKnox, BusyBox and Root), execute
5. Clear Cache and Dalvik
6. Reboot
If Superuser doesn't install or root doesn't work correctly:
1. First try to install SuperSU from GooglePlay
If this fails:
1. Download UPDATE-SuperSU-v1.93.zip for TWRP from: http://forum.xda-developers.com/showthread.php?t=1538053
2. Copy it to root of SD card
3. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots
4. Install ZIP file from TWRP
5. Reboot
Boot into Bootloader: Turn off phone, then press Vol DOWN, Home and Power until boots
Boot into Recovery: Turn off phone, then press Vol UP, Home and Power until boots
Sent from my GT-N7105 using Tapatalk

[BPH6][24.08.16][SM-G935F/FD/W8] SuperMan-Rom V1.12 Aroma -> Flash FAIL

Hello,
http://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
This ROM looks great !!! I managed strictly following the steps below to install the rom on my S7 Edge once. Later I wanted to reflash the ROM to change things in AROMA. Since it is impossible for me to go beyond the boot Samsung screen (every time I wait more than 30 minutes, it seems blocked and the phone becomes hot). Since I tried doing all the steps again thinking to reflash the CP and BL, TWRP, and disable encryption of /data partition etc but I still have the same problem.
During the installation of the ROM, I tried several setups, with or without root, with differents kernels etc, nothing works, the installation goes smoothly. It's just that the phone remains locked at startup ("Samsung Galaxy S7 edge, POWERED BY android").
I have Odin 3.10.7 and 3.12.3, TWRP 3.0.2-3hero2lte, BL_G935FXXU1BPH6 and CP_G935FXXUBPH1 and no-verity-opt-encrypt-2.1.
I also tried flashing stock rom and then Superman and fail again.
Could someone help me ?
Thank you.
(I just didn't do the step with CSC because it's seems to be optional)
1. Start your phone, go to settings, about device, software info and hit build.number around 10 times so developer options will show up
2. Open developer options and tick: OEM unlock
3. Shut your phone off
4. You now need a computer, download odin3.10.11
5. Download two files, first is bootloader and second modem: bootloader and modem
6. Boot your phone into download mode by pressing: home+volume down+ power on
7. Open the downloaded odin on your windows pc and click on BL tab and add the file that name begins with BL, same for CP tab
8. After this, reboot to download mode again
9. Install TWRP (latest one is needed to support new BL's) will be next step, for this, follow all steps provided in this forum: TWRP Thread (booting into download mode: press home+volume down+power on, booting into download mode press: home+volume up+power on)
10. when you got TWRP working: We need to disable encryption, for this you should boot into recovery mode (as described above)
11. Flash this on your phone
12. After flashing this, hit wipe, full wipe (this will clean all internal memory and your data will be lost!!)
13. you can test if encryption is still enabled, if TWRP shows error about not mounting /data your phone is still encrpyted
14. Now you can download the rom onto your PC and then transfer it via usb to your phone
15. It is rom installing time install the rom!
16. After successfully installing the rom hit reboot and you are good to go!
17. If you want you can use my csc selection to get your desired csc, if you want that you can grab it here: CSC Selection V1.6

Rooting J5 Prime (G570M)

How can i root this phone???
Mephis96 said:
How can i root this phone???
Click to expand...
Click to collapse
Download TWRP for your phone (at least 3.0.0.0 version). Flash it via Odin.
Instruction:
Needed - Samsung Odin
TWRP (TAR(maybe MD5)file)
Root manager zip file (I recommend Magisk Manager)
Now steps:
1. Turn on USB Debugging and OEM Unlock in your phone.
2. Turn off your device
3. Push Vol- , Home and Power buttons at once
4. When you'll see warning, click Vol+
5. Open Odin
6. Make sure you have F. Reset Time enabled (Options fold)
7. Go back to Log fold
8. Click PDA (maybe AP) button
9. Select your TWRP file
10. When it's loaded, connect your phone
11. You should see Added! in log
12. Click 'Start' button
13. Reboot phone into the recovery mode.
If it failed, remove the battery from the phone for 5 minutes and try again. If it's still failing, just don't stop trying.
If I did help, leave ?.

[R&D][ROM] root acquired for Samsung j8, just need someone to make twrp and roms

I have found out a way to root the Samsung galaxy j8(SM-J810G something).
Backup everything
Unlock your bootloader
Download your correct boot.img from firmware. Mobi (bacically check your software build version)
Put it one your phone and install magisk manager and then patch the boot.img
Then copy it to your pc
Put the phone in download mode
Flash it
Go to magisk and set everything up
And you will have root
Don't forget to backup your data as I am not responsible for data loss
Now that we have root I request you guys to build a twrp or resurrection remix is rom for this, not forcing or anything but just if you have the free time then please do try
I'm happy to hear if anyone at least tried!!:laugh:
Also I think the architecture is somewhat similar to note 3 as when I select my device in the xda app then I get all note 3 stuff so I guess that might be a headstart!
Anyways do leave a comment if anyone tried making the recovery or resurrection remix is rom!! That would be great!!
Root aquired for J810Y and probably for all models.
You will need the stock Rom files from Sammobile for your phone model(BL, AP, CP, HOME CSC) and Odin on your PC.
1. Install Magisk manager on your phone.
2 Copy the AP file on your Download folder of your phone.
3 Open Magisk and tap Install Magisk then Select and patch a file. Go on Download folder and select the AP file to patch. After is done it will create a file in your Download folder named magisk_patched.tar. Copy this file back on your PC.
4 Run Odin and put your phone on Download mode. To get in Download mode shut your phone off, Hold pressed VOLUME UP + POWER, select Reboot to bootloader.
5 In Odin select BL, CP and Home_CSC from your stock ROM folder. In AP select the magisk_patched.tar file. Go on Optons and uncheck Auto Reboot. Hit START and let him finish. IMPORTANT, READ FIRST : After is done you have to restart the phone by pressing VOLUME DOWN + POWER and when the screen is black immediately press VOLUME UP + POWER. Dont let go until you are in Recovery mode, even if restarts.
5 select Wipe data/ factory reset and then Reboot system now. Might take a while to boot.
6 Set up your phone and install Magisk Manager again. It will ask you to complete the rooting will need to install few more files. Press OK.
WELL DONE. You have root now.
Is there any way to root without lose massage and call log?
nechita said:
Root aquired for J810Y and probably for all models.
You will need the stock Rom files from Sammobile for your phone model(BL, AP, CP, HOME CSC) and Odin on your PC.
1. Install Magisk manager on your phone.
2 Copy the AP file on your Download folder of your phone.
3 Open Magisk and tap Install Magisk then Select and patch a file. Go on Download folder and select the AP file to patch. After is done it will create a file in your Download folder named magisk_patched.tar. Copy this file back on your PC.
4 Run Odin and put your phone on Download mode. To get in Download mode shut your phone off, Hold pressed VOLUME UP + POWER, select Reboot to bootloader.
5 In Odin select BL, CP and Home_CSC from your stock ROM folder. In AP select the magisk_patched.tar file. Go on Optons and uncheck Auto Reboot. Hit START and let him finish. IMPORTANT, READ FIRST : After is done you have to restart the phone by pressing VOLUME DOWN + POWER and when the screen is black immediately press VOLUME UP + POWER. Dont let go until you are in Recovery mode, even if restarts.
5 select Wipe data/ factory reset and then Reboot system now. Might take a while to boot.
6 Set up your phone and install Magisk Manager again. It will ask you to complete the rooting will need to install few more files. Press OK.
WELL DONE. You have root now.
Click to expand...
Click to collapse
man thank you all the useless tutorials in youtube you saved my time bro

J510FN Magisk not installed problem

Hello Everybody. I am trying to install magisk to my J5 (J510FN) for the past few days. I am writing down what i am doing. I did that procedure 5-10 times with no results. Please let me know
To start the phone was bricked and i downloaded a samsung firmware to install.
https://ava4.androidfilehost.com/dl/Sj1K2v_P2Tk05YLBFZTc9g/1634062127/1899786940962603729/J510FNXXS3BSH2_J510FNDBT3BSH2_DBT.zip?
Download ODIN
https://samsungodin.com/download/Odin3_v3.13.1.zip
I had the Samsung/framework drivers from previous phones.
Press Vol Down+ Home+ Power Buttons and i enter download mode. I select AP -> go to the official Samsung firmware on the PC and select it.
Connecting the USB and i see the added on odin. Press Start.
It taking a while and then See the green Pass. Disconnect the phone. The phone is booting. I follow the instruction. select Not send diagnostic data and no google account. The phone is on.
Then settings> About phone> Software information> Tap on build number until the developer modem is on.
Back to settings>developer options OEM UNLOCK on, Auto update system off, USB Debugging on and ok.
Turning off the phone.
https://eu.dl.twrp.me/j5xnlte/twrp-3.3.1-0-j5xnlte.img and downloading the twrp recovery
Press Vol Down+ Home+ Power Buttons to enter download mode. Select AP -> go to the twrp on the PC and select it.
Connecting the USB and i see the added on odin. Deselect Auto Reboot from the options menu on odin.
Press Start. Its taking a second. Unplugging the battery. Putting on the battery.
Press Volume UP Home+ Power Buttons enter recovery mode. I go to wipe and select only the cache. Go to reboot and select to system> Don't install twrp.
Phone is booting.
Downloading latest magisk from
Releases ยท topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
https://ava2.androidfilehost.com/dl/UpyKzryZOrpj1yhppDX8kA/1634373961/8889791610682932422/RMM-State-Bypass-v3-corsicanu.zip?
extract the official firmware above and take the boot image.
Connecting the phone with usb. Drag and drop on the phone the 3 files above.
Install magisk (allow unknown sources). Open magisk. next to magisk select install, next, select and patch a file. In top right show internal storage. In the top left 3 lines then galaxy. select the boot.img. Patched succesfully. Turn off the phone.
Press Volume UP Home+ Power Buttons enter recovery mode. install > install image> select the magisk_patched-***_**. flashing succesfully
select
https://ava2.androidfilehost.com/dl/UpyKzryZOrpj1yhppDX8kA/1634373961/8889791610682932422/RMM-State-Bypass-v3-corsicanu.zip?
flashed succesfully. Reboot system.
Opening magisk installed N/A
Can anybody help?
edit: after downgrading the magisk it appears installed. When i upgrade to the latest version it shows again not installed. When i install a module from smalipatcher it stays in a bootloop.

Categories

Resources