Note: works only on GT-i8190
Software needed:
Odin v 3.07 ( http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315 )
Cwm touch recovery file ( http://www.androidfilehost.com/?fid=9390334956548391158 )
Note: please use only the link given above for Cwm touch recovery file
DO THIS AT YOUR OWN RISK
How to:
1) open Odin in your computer
2) select PDA and
3) check if only auto reboot and F.reset time checkboxes are selected
4) put your phone on download mode (shut down the phone then press volume down key + power key + home key)
5) a warning will appear then press volume up key
6) connect your phone to your computer
7) in the message box it will show added (on Odin)
8) click start
9) then wait till it shows pass
10) unplug your device
11) install rom manager by clockworkmod (optional)
You are finished
I don't think it is possible to root your phone without first install any cwm recovery
This have been possible ever since I made the Odin file.... And you don't need root to use Odin.
Sent through time and space from my s3mini/CM10.1
I had JB 4.3 already installed with root on my N7105, but last month came a new minor update called N7105ZHEML. This is for Hong Kong versions of the Galaxy Note II LTE. This seems a fairly exotic update, as I couldn't find much info about it and I had to scramble from dozens of various sources with more or less success. The update installed without a glitch via Odin, but I couldn't get the phone to re-root nor could I get back to my old NAND backup, as the phone didn't seem to restart properly after a restore. So you can imagine that I got slightly nervous...
Please note that this is for the N7105 (LTE version) and the Hong Kong Version of the latest 4.3 update, called N7105ZHEML.
It might work for other hard or software too, but I can't be sure.
Do everything on your own risk, as you can easily lose all your data or even worse, brick your phone if you don't know what you're doing!
Anyway, here is what worked for me, hope this helps somebody:
Check new N7105 firmware: http://www.sammobile.com/firmwares/1/?model=GT-N7105&pcode=TGY
1. Backup using ROM Manager/NAND
2. Backup using Titanium
3. Download new ROM file, unzip it
4. Open Odin 3.09, Click AP/PDA and choose N7105ZHUENA1_N7105ZZHENA1_N7105ZHEML1.tar.md5
5. Make sure re-partition is NOT ticked
6. Turn off phone, then press Vol Down, Home and Power until boots
7. press Vol Up (Continue)
8. Connect to USB, Odin should turn blue
9. Click Start, wait till phone boots (takes really long time, incl. Media Database update)
10. Do not disconnect until PASSED! shows up in Odin
Install TWRP Recovery:
Check here for updated TWRP: http://teamw.in/project/twrp2/125
1. Open Odin 3.09, Click AP/PDA and choose openrecovery-twrp-2.7.0.0-t0lte.img.tar
2. Make sure re-partition is NOT ticked
3. Turn off phone, then press Vol Down, Home and Power until boots
4. press Vol Up (Continue)
5. Connect to USB, Odin should turn blue
6. Click Start, wait till phone boots
De-Knox, BusyBox and Re-Root with PowerBoxV2:
Check here for updated PowerBox: http://forum.xda-developers.com/showthread.php?t=2651601
1. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots (can be done without booting up after installing TWRP)
2. Remove SD Card, copy Powerbox_v2.zip to root of SD card
3. Install ZIP file from TWRP
4. Run PowerBox, choose only first option (DeKnox, BusyBox and Root), execute
5. Clear Cache and Dalvik
6. Reboot
If Superuser doesn't install or root doesn't work correctly:
1. First try to install SuperSU from GooglePlay
If this fails:
1. Download UPDATE-SuperSU-v1.93.zip for TWRP from: http://forum.xda-developers.com/showthread.php?t=1538053
2. Copy it to root of SD card
3. Boot into TWRP Recovery: Turn off phone, then press Vol UP, Home and Power until boots
4. Install ZIP file from TWRP
5. Reboot
Boot into Bootloader: Turn off phone, then press Vol DOWN, Home and Power until boots
Boot into Recovery: Turn off phone, then press Vol UP, Home and Power until boots
Sent from my GT-N7105 using Tapatalk
HOW TO ENABLE NAVIGATION BAR ON GALAXY S6?
1. ROOTING YOUR PHONE
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANY BRICKED AND/OR BROKEN DEVICES!
DO THIS ON YOUR OWN!
YOUR WARANTY IS NOW VOID!
!!!DISCLAIMER!!!
1. Go to: https://autoroot.chainfire.eu and try to find, or search for thw word: 'zeroflte'
2. Download the file and move the zip on your desktop, extract it
3. Make sure it's extracted in a folder, so that you keep it organised
4. Power off your device and boot into Download Mode (Do it by holding POWER+HOME+VOLUME DOWN keys)
5. After you get to the aqua-marine screen, press the VOLUME UP key
6. Go to: http://developer.samsung.com/technical-doc/view.do?v=T000000117 and download the file
7. Extract the file on your Desktop and run the application
8. After it has finished installing, connect your device to your computer
9. Run Odin application and see if the program is somewhere saying ID:COM with a bluish background
10. If it does, click on AP button and select the CF-Auto Root file
11. Wait for the program to say 'Leave CS'
12. Then click START and wait for the program to finish
13. After it's done, unplug your device and wait for it to boot
14. If your device reboots several times, don't worry, it's normal
15. When it's finished booting, check in your app drawer for an app called SuperSU
16. If it's installed, then congrats, you've just rooted your device
2. INSTALLING A CUSTOM RECOVERY
1. Go to: https://dl.twrp.me/zeroflte/twrp-3.0.2-1-zeroflte.img.tar.html and click the big blue Download button
2. When it has finished downloading, run Odin
3. Boot your device in Download Mode again and plug it in your computer
4. Click on AP in Odin and navigate to the 'twrp-something' file
5. Click on START and wait for it to finish
6. When your device restarts, quickly press: POWER+HOME+VOLUME UP to boot into Recovery Mode
7. When you boot into Recovery Mode you can click on Reboot and then System
8. Congrats, you're finished with installing a Custom Recovery
3. INSTALLING XPOSED FRAMEWORK
1. Go to: https://www.androidfilehost.com/?w=files&flid=64200 and click on the arm64 version of the file
2. When it's finished downloading, boot into Recovery mode and click on Install
3. Navigate to your Download folder and select the Xposed.zip file
4. Slide the blue bar to begin the installation
5. When the installation is finished, click on Reboot System and wait for it to reboot
6. Don't worry if it takes six weeks to boot, it's just like that, no one can solve it
7. When it boots go to: http://forum.xda-developers.com/devdb/project/dl/?id=18297 and click the big green Direct Download button
8. Make sure you moved the apk to your phone
9. Install it and go trough the setup proccess
10. When you're finished head over to the Xposed tab and grant it Root permissions
11. Search for a module called 'GravityBox [MM]' (without quotation marks)
12. Install it, don't open it, click DONE when it's finished installing and return to the XDA Labs app
13. Click on ENABLE AND REBOOT
4. ENABLING THE NAVIGATION BAR
1. Open the GravityBox app and go to Navigation bar tweaks
2. Enable Master switch and Enable navigation bar
3. Reboot your phone and there you have it
THANKS TO:
ChainFire for CF-Auto Root
TeamWin for TWRP
Wanam for Xposed
So here are my experiences with rooting the Samsung Galaxy Tab A 8.0 (2019) with S Pen (SM-P205)
First of all i am not responsible for any damages or data loss of your devices. So be aware that you could brick your device!
I tested this on a Samsung Galaxy Tab A with SPEN LTE SM-205. The procedure should be the same for the SM-P200 as this procedure is a general Samsug procedure for 2019 Devices.
But since i dont have one. I cant test this.
As no twrp recovery exists for this device be very carefull!
Before you begin make a backup of your internal storage as it gets deleted several times during this procedure!!!!
Therefore it could be handy to also use a sdcard(wont get deleted) for copying files to/from the device.
But it can also be done without. This howto is based on the magisk manual from topjohnwu.
https://topjohnwu.github.io/Magisk/install.html (Samsung System-as-root Section)
Tools needed:
Firmware of your device
Odin3_v3.13.1 Link thanks to Life Companion
Magisk Manager Link thanks to topjohnwu
Samfirm (deprecated but works) Link thanks to zxz0O0
1. Do a software update to the newest version of the firmware.
At the time writing this is P205DXU2ASH2 for my Samsung Galaxy Tab A with SPen LTE (SM-P205)
2. Find out what firmware your device is using and also what's is the region / CSC of your device.
To do that go to settings/About Tablet/Software Information/
Baseband version:
e.g. P205DXU2ASH2
Next Step scroll down to "Service providewr SW ver." and look at your CSC in the last line:
eg. XME/XME/XME -> CSC is XME (Malaysia)
3. Now its time to download the correspondending firnmware for your device. Use SamFirm Tool to download your firmware (Check "Auto". Type in your Model (SM-P205 and your CSC) and download or download it
from the usual Samsung Firmware Download Pages
(eg. SamMobile.com etc)
4. Unzip the downloaded Firwmare with 7zip
5. You will now have 5 Files beginning with their names: AP,BL,CP,CSC and HOME_CSC
These are ODIN flashable files.
6. Download and install the current magisk manager to our device. Also copy the AP File to your devices internal memory or sdcard. Best method for copying is using adb.
Start magisk and click on install. Press a second time install and choose "Select and Patch a File" Choose your copied AP file. Magisk will now patch the image and inject itself.
The patched file can now be found in your Download directory of your internal memory. Its name is magisk_patched.tar. Copy it over to your PC. Again best method is using adb for copying.
7. Bootloader Unlocking:
Quote from the magisk documentation from topjohnwu:
"
Unlocking Bootloader
Normally I wouldn’t provide instructions for this, but since things had changed drastically from previous Samsung devices, and there are some caveats, I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot your device to download mode. Either use adb reboot download, or use the key combo for your device.
"
Click to expand...
Click to collapse
Download Mode Key Combo: Vol + and Vol -
"
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
Just when you think the bootloader is unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will reject any unofficial partitions before VaultKeeper explicitly allows it.
Go through the initial setup. Skip through all the steps since data will be wiped again later when we are installing Magisk. Connect the device to internet in the setup!
Enable developer options, and confirm that the OEM unlocking option exists and grayed out! The VaultKeeper service will unleash the bootloader after it confirms that the user has the OEM unlocking option
enabled.
Your bootloader now accepts unofficial images in download mode.
"
Click to expand...
Click to collapse
8. Next step will be flashing the patched image to your device. We will use 3 of the files from the original stock firmware files you downloaded except for the AP File.
But first click on Options and disable Auto Reboot! After that click on BL and choose correspondending File beginning with BL from the unziped original stock firmwarefiles you downloaded.
For the AP file we will choose the patched magisk image magisk_patched.tar we copied over from our device. For CP and CSC choose the CP and HOME_CSC files. USERDATA will not be used.
9. So now its time to flash your device. First connect the device to the PC. Without connection it will not get into download mode. Boot your device in download mode by first turning it off.
Turn it on by pressing the power button and if it turns on immediately press Vol + and Vol - after relasing the power button and hold it until you see the Download Mode Screen.
If you dont't get it try the fellowing: Turn on the device with power button. Hold Vol - and Power and wait about 7 secs until the display turn black. Imidiantly press Vol Vol + and Vol - and hold until you see the download mode
screen. Press Vol+ to activate Download Mode.
Back in Odin its now time to flash your device.
Press all finger and begin flashing by pressing "Start".
The flash process is finshed as you see the a green "Pass" in the left upper corner.
10. As of now you have to boot into recovery everytime to start your device into a rooted system. Be aware of this and avoid booting the device without pressing the key combination for the recovery. This must be
done everytime you turn it on or after every reboot of the device. If you forget this the device will boot into a non rooted system and samsungs security could make your device unusuable and you
have to flash the device again and losing all data.
So now press Vol - and Power for about 7 secs to reboot the device. Immediately press Vol + and Power. Hold it and wait until you see the stock recovery. It will
possibly show Ereasing data and reboot after that. Press again Vol + and Power and hold it until you will now see the recovery menu. Select Wipe data/factory reset with the Vol + and Vol - Buttons and confirm
with the power button.
After that reboot the device and press the recovery key combo again but now release it shortly after you see the Samsung Logo a second time. Wait until it is booted and do the initial
setup. Install Magisk Manager again.
When you start it it should show a message that it should have to do some further setups and will reboot the device.
Confirm that and wait until it reboots as you now have to press the key combo for booting
into recovery again. Release it as the Samsung Logo comes up a second time. So you see. This is a important step pressing this key combo.
11. So after the reboot your device should now be rooted. Check that by starting magisk manager.
Again this tutorial is based on the magisk documentation. So all credits go to topjohnwu.
flushb
Amazing! Thanks for this detailed info! Finally a way to Root our Tab!
Will follow your instructions, try it on mine (Hong Kong LTE) and give feedback.
Thanks again
VeEuzUKY said:
Amazing! Thanks for this detailed info! Finally a way to Root our Tab!
Will follow your instructions, try it on mine (Hong Kong LTE) and give feedback.
Thanks again
Click to expand...
Click to collapse
Any update yet?
Thank you for the directions! I was able to root my SM-P200 (Korean Version). I did have to do step 7 (Unlock Bootloader) before step 6 (Patching the AP file with Magisk) for it to flash properly.
Mine stuck at "Download Mode" once flashed T_T
I followed all your steps but mine got stuck on "download mode" once flashed and restarted..How to solve it?
What option do i need to tick or untick during injecting magisk (i ticked all 3s including "recovery mode")? and during flashing with odin (i ticked only F. Reset Time)...
Can you share your "magisked" version of ap.tar?
i'm also using xme lte version of sm-p205...
Resolved
Thanks, solved the problem...All i did is extracting the .tar and recompress it using 7zip...Just ensure the compress one is in the same setup...and the 2nd screen of samsung (powered bt knoxx, same with the 1st screen,release the recovery key immediately once 2nd screen popped up) is the one after the "warning of boatloader with power symbol at the bottom" not the "samsung" only logo...Thanks people..Appreciate the post...
This is great - thanks
Bit of a shame we have to reboot via recovery or else risk loosing all our data. Any way around this? I suppose we would need TWRP for this device to flash RMM zip. And TWRP is probably unlikely considering this is a relatively uncommon device
Edit:
In accidentally starting without going via recovery it would seem I've now got KG prenormal. Can't flash the magisk patched AP. Only stock. So that's back where I am. Anyone have any advice on how I can root now? seems now to be undoable
debatingrooster said:
This is great - thanks
Bit of a shame we have to reboot via recovery or else risk loosing all our data. Any way around this? I suppose we would need TWRP for this device to flash RMM zip. And TWRP is probably unlikely considering this is a relatively uncommon device
Edit:
In accidentally starting without going via recovery it would seem I've now got KG prenormal. Can't flash the magisk patched AP. Only stock. So that's back where I am. Anyone have any advice on how I can root now? seems now to be undoable
Click to expand...
Click to collapse
Hi,
do you still see the oem unlock in delevoper settings? Normaly you have to put in a sim card, turn on mobile data and wait for 7 days until you can retry rooting.
flushb
P.S: I already compiled a kernel that boots but i dont think i am able to build a working twrp recovery because i am not a developer. Samsung did finaly release the current kernel sources.
P.P.S: I have made a magisk dual speaker module if someone is in need i can upload it.
flushback666 said:
Hi,
do you still see the oem unlock in delevoper settings? Normaly you have to put in a sim card, turn on mobile data and wait for 7 days until you can retry rooting.
flushb
P.S: I already compiled a kernel that boots but i dont think i am able to build a working twrp recovery because i am not a developer. Samsung did finaly release the current kernel sources.
P.P.S: I have made a magisk dual speaker module if someone is in need i can upload it.
Click to expand...
Click to collapse
Thanks for that - I think I'll just have to wait a little while. I'm using the wifi version so no sim for me. can still unlock bootloader ok, just can't flash magisk patched tar.
Well done on the kernel, hopefully TWRP appears for this device, it's a great little tablet.
I tried to have a go building TWRP using this guide (https://github.com/TwrpBuilder/twrpbuilder_tree_generator/wiki). But had some errors in compiling, though I'm not a developer so I'm not too sure about solving them. But when I've got time and motivation I'd love to learn more about development!
Halp
Mine got failed and its stuck on recovery.img Pls some help me via team viewer (
flushback666 said:
So here are my experiences with rooting the Samsung Galaxy Tab A 8.0 (2019) with S Pen (SM-P205)
First of all i am not responsible for any damages or data loss of your devices. So be aware that you could brick your device!
I tested this on a Samsung Galaxy Tab A with SPEN LTE SM-205. The procedure should be the same for the SM-P200 as this procedure is a general Samsug procedure for 2019 Devices.
But since i dont have one. I cant test this.
As no twrp recovery exists for this device be very carefull!
Before you begin make a backup of your internal storage as it gets deleted several times during this procedure!!!!
Therefore it could be handy to also use a sdcard(wont get deleted) for copying files to/from the device.
But it can also be done without. This howto is based on the magisk manual from topjohnwu.
https://topjohnwu.github.io/Magisk/install.html (Samsung System-as-root Section)
Tools needed:
Firmware of your device
Odin3_v3.13.1 Link thanks to Life Companion
Magisk Manager Link thanks to topjohnwu
Samfirm (deprecated but works) Link thanks to zxz0O0
1. Do a software update to the newest version of the firmware.
At the time writing this is P205DXU2ASH2 for my Samsung Galaxy Tab A with SPen LTE (SM-P205)
2. Find out what firmware your device is using and also what's is the region / CSC of your device.
To do that go to settings/About Tablet/Software Information/
Baseband version:
e.g. P205DXU2ASH2
Next Step scroll down to "Service providewr SW ver." and look at your CSC in the last line:
eg. XME/XME/XME -> CSC is XME (Malaysia)
3. Now its time to download the correspondending firnmware for your device. Use SamFirm Tool to download your firmware (Check "Auto". Type in your Model (SM-P205 and your CSC) and download or download it
from the usual Samsung Firmware Download Pages
(eg. SamMobile.com etc)
4. Unzip the downloaded Firwmare with 7zip
5. You will now have 5 Files beginning with their names: AP,BL,CP,CSC and HOME_CSC
These are ODIN flashable files.
6. Download and install the current magisk manager to our device. Also copy the AP File to your devices internal memory or sdcard. Best method for copying is using adb.
Start magisk and click on install. Press a second time install and choose "Select and Patch a File" Choose your copied AP file. Magisk will now patch the image and inject itself.
The patched file can now be found in your Download directory of your internal memory. Its name is magisk_patched.tar. Copy it over to your PC. Again best method is using adb for copying.
7. Bootloader Unlocking:
Quote from the magisk documentation from topjohnwu:
Download Mode Key Combo: Vol + and Vol -
8. Next step will be flashing the patched image to your device. We will use 3 of the files from the original stock firmware files you downloaded except for the AP File.
But first click on Options and disable Auto Reboot! After that click on BL and choose correspondending File beginning with BL from the unziped original stock firmwarefiles you downloaded.
For the AP file we will choose the patched magisk image magisk_patched.tar we copied over from our device. For CP and CSC choose the CP and HOME_CSC files. USERDATA will not be used.
9. So now its time to flash your device. First connect the device to the PC. Without connection it will not get into download mode. Boot your device in download mode by first turning it off.
Turn it on by pressing the power button and if it turns on immediately press Vol + and Vol - after relasing the power button and hold it until you see the Download Mode Screen.
If you dont't get it try the fellowing: Turn on the device with power button. Hold Vol - and Power and wait about 7 secs until the display turn black. Imidiantly press Vol Vol + and Vol - and hold until you see the download mode
screen. Press Vol+ to activate Download Mode.
Back in Odin its now time to flash your device.
Press all finger and begin flashing by pressing "Start".
The flash process is finshed as you see the a green "Pass" in the left upper corner.
10. As of now you have to boot into recovery everytime to start your device into a rooted system. Be aware of this and avoid booting the device without pressing the key combination for the recovery. This must be
done everytime you turn it on or after every reboot of the device. If you forget this the device will boot into a non rooted system and samsungs security could make your device unusuable and you
have to flash the device again and losing all data.
So now press Vol - and Power for about 7 secs to reboot the device. Immediately press Vol + and Power. Hold it and wait until you see the stock recovery. It will
possibly show Ereasing data and reboot after that. Press again Vol + and Power and hold it until you will now see the recovery menu. Select Wipe data/factory reset with the Vol + and Vol - Buttons and confirm
with the power button.
After that reboot the device and press the recovery key combo again but now release it shortly after you see the Samsung Logo a second time. Wait until it is booted and do the initial
setup. Install Magisk Manager again.
When you start it it should show a message that it should have to do some further setups and will reboot the device.
Confirm that and wait until it reboots as you now have to press the key combo for booting
into recovery again. Release it as the Samsung Logo comes up a second time. So you see. This is a important step pressing this key combo.
11. So after the reboot your device should now be rooted. Check that by starting magisk manager.
Again this tutorial is based on the magisk documentation. So all credits go to topjohnwu.
flushb
Click to expand...
Click to collapse
i got it to root thanks , but i try to uninstall app system and will got bootloop what's wrong ???
Naruiki said:
i got it to root thanks , but i try to uninstall app system and will got bootloop what's wrong ???
Click to expand...
Click to collapse
The reason you get a bootloop is because even though the bootloader is unlocked and you've rooted the tablet, all of Samsung's security stuff is still enabled, so when you go tampering with the /system partition, it triggers the security and ultimately results in a bootloop. Unfortunately, there is currently no way to disable Samsung's security measures without a custom recovery, and even then you have to flash a NoKnox script to disable Knox, a multi-disabler to disable all of the other stuff, and then a custom kernel to completely wipe all of it out. Root is a good first step, but we are far from finished with this device. I'm currently working on TWRP, but from there who knows?
EagerestWolf said:
The reason you get a bootloop is because even though the bootloader is unlocked and you've rooted the tablet, all of Samsung's security stuff is still enabled, so when you go tampering with the /system partition, it triggers the security and ultimately results in a bootloop. Unfortunately, there is currently no way to disable Samsung's security measures without a custom recovery, and even then you have to flash a NoKnox script to disable Knox, a multi-disabler to disable all of the other stuff, and then a custom kernel to completely wipe all of it out. Root is a good first step, but we are far from finished with this device. I'm currently working on TWRP, but from there who knows?
Click to expand...
Click to collapse
Thanks for The response
Btw, Yesterday I made a mistake when I rebooted my device and then bootloop, then I tried to fiddle with it myself without using a computer, and I was successful fix bootloop without a computer but all data is lost as new ,but with the circumstances rooting
---------- Post added at 06:36 AM ---------- Previous post was at 06:31 AM ----------
Info: can't install xposed ,
i already try and get bootloop
Magisk update
flushback666 said:
So here are my experiences with rooting the Samsung Galaxy Tab A 8.0 (2019) with S Pen (SM-P205)
First of all i am not responsible for any damages or data loss of your devices. So be aware that you could brick your device!
I tested this on a Samsung Galaxy Tab A with SPEN LTE SM-205. The procedure should be the same for the SM-P200 as this procedure is a general Samsug procedure for 2019 Devices.
But since i dont have one. I cant test this.
As no twrp recovery exists for this device be very carefull!
Before you begin make a backup of your internal storage as it gets deleted several times during this procedure!!!!
Therefore it could be handy to also use a sdcard(wont get deleted) for copying files to/from the device.
But it can also be done without. This howto is based on the magisk manual from topjohnwu.
https://topjohnwu.github.io/Magisk/install.html (Samsung System-as-root Section)
Tools needed:
Firmware of your device
Odin3_v3.13.1 Link thanks to Life Companion
Magisk Manager Link thanks to topjohnwu
Samfirm (deprecated but works) Link thanks to zxz0O0
1. Do a software update to the newest version of the firmware.
At the time writing this is P205DXU2ASH2 for my Samsung Galaxy Tab A with SPen LTE (SM-P205)
2. Find out what firmware your device is using and also what's is the region / CSC of your device.
To do that go to settings/About Tablet/Software Information/
Baseband version:
e.g. P205DXU2ASH2
Next Step scroll down to "Service providewr SW ver." and look at your CSC in the last line:
eg. XME/XME/XME -> CSC is XME (Malaysia)
3. Now its time to download the correspondending firnmware for your device. Use SamFirm Tool to download your firmware (Check "Auto". Type in your Model (SM-P205 and your CSC) and download or download it
from the usual Samsung Firmware Download Pages
(eg. SamMobile.com etc)
4. Unzip the downloaded Firwmare with 7zip
5. You will now have 5 Files beginning with their names: AP,BL,CP,CSC and HOME_CSC
These are ODIN flashable files.
6. Download and install the current magisk manager to our device. Also copy the AP File to your devices internal memory or sdcard. Best method for copying is using adb.
Start magisk and click on install. Press a second time install and choose "Select and Patch a File" Choose your copied AP file. Magisk will now patch the image and inject itself.
The patched file can now be found in your Download directory of your internal memory. Its name is magisk_patched.tar. Copy it over to your PC. Again best method is using adb for copying.
7. Bootloader Unlocking:
Quote from the magisk documentation from topjohnwu:
Download Mode Key Combo: Vol + and Vol -
8. Next step will be flashing the patched image to your device. We will use 3 of the files from the original stock firmware files you downloaded except for the AP File.
But first click on Options and disable Auto Reboot! After that click on BL and choose correspondending File beginning with BL from the unziped original stock firmwarefiles you downloaded.
For the AP file we will choose the patched magisk image magisk_patched.tar we copied over from our device. For CP and CSC choose the CP and HOME_CSC files. USERDATA will not be used.
9. So now its time to flash your device. First connect the device to the PC. Without connection it will not get into download mode. Boot your device in download mode by first turning it off.
Turn it on by pressing the power button and if it turns on immediately press Vol + and Vol - after relasing the power button and hold it until you see the Download Mode Screen.
If you dont't get it try the fellowing: Turn on the device with power button. Hold Vol - and Power and wait about 7 secs until the display turn black. Imidiantly press Vol Vol + and Vol - and hold until you see the download mode
screen. Press Vol+ to activate Download Mode.
Back in Odin its now time to flash your device.
Press all finger and begin flashing by pressing "Start".
The flash process is finshed as you see the a green "Pass" in the left upper corner.
10. As of now you have to boot into recovery everytime to start your device into a rooted system. Be aware of this and avoid booting the device without pressing the key combination for the recovery. This must be
done everytime you turn it on or after every reboot of the device. If you forget this the device will boot into a non rooted system and samsungs security could make your device unusuable and you
have to flash the device again and losing all data.
So now press Vol - and Power for about 7 secs to reboot the device. Immediately press Vol + and Power. Hold it and wait until you see the stock recovery. It will
possibly show Ereasing data and reboot after that. Press again Vol + and Power and hold it until you will now see the recovery menu. Select Wipe data/factory reset with the Vol + and Vol - Buttons and confirm
with the power button.
After that reboot the device and press the recovery key combo again but now release it shortly after you see the Samsung Logo a second time. Wait until it is booted and do the initial
setup. Install Magisk Manager again.
When you start it it should show a message that it should have to do some further setups and will reboot the device.
Confirm that and wait until it reboots as you now have to press the key combo for booting
into recovery again. Release it as the Samsung Logo comes up a second time. So you see. This is a important step pressing this key combo.
11. So after the reboot your device should now be rooted. Check that by starting magisk manager.
Again this tutorial is based on the magisk documentation. So all credits go to topjohnwu.
flushb
Click to expand...
Click to collapse
Magisk requires renewal, is it okay if it's updated ??
Does bootloop not occur ??
I am looking forward for a twrp and a Lineage for this tablet so hard...you cant imagine....
Pls keep on trying
Thx for the root manual
Root ------> speed up tablet
Has anyone who has achieved root used an app like kernel adiutor to improve performance and how did it go? How did affect battery life?
Naruiki said:
i got it to root thanks , but i try to uninstall app system and will got bootloop what's wrong ???
Click to expand...
Click to collapse
I have shared my detail experience at https://forum.xda-developers.com/galaxy-tab-a/help/root-roms-2019-tab-8-0-sm-p200-5-t3933089/page2
can i update magisk through magisk manager ??
hi,
thx for the comprehensive instruction.
I have successfully rooting my sm-p205
I have 2 questions if u pls help me :
1. I want root my sm-p205 because I want to use tincore keymapper. but although now I have successfully rooted it, it seems that I have to set the selinux to permissive.
I have tried all I've found, from using selinuxmodechanger, selinuxswitch, or even using terminal with su 0 setenforce 0, and all not working. that selinux still enforcing.
can u pls help me how to change the selinux ?
2. if I couldnt change the selinux, than it's no use for me to still on root. Is there anyway to go back to original stock firmware and unroot ? because I read on the last instruction of magisk that I may not flash it again with usual ap file that it may make it brick ?
thx
Any update on a lineage build for this? I would love to have adaptive storage work on this tablet - the adb shell version fails for me corrupting the sd.
I have found out a way to root the Samsung galaxy j8(SM-J810G something).
Backup everything
Unlock your bootloader
Download your correct boot.img from firmware. Mobi (bacically check your software build version)
Put it one your phone and install magisk manager and then patch the boot.img
Then copy it to your pc
Put the phone in download mode
Flash it
Go to magisk and set everything up
And you will have root
Don't forget to backup your data as I am not responsible for data loss
Now that we have root I request you guys to build a twrp or resurrection remix is rom for this, not forcing or anything but just if you have the free time then please do try
I'm happy to hear if anyone at least tried!!:laugh:
Also I think the architecture is somewhat similar to note 3 as when I select my device in the xda app then I get all note 3 stuff so I guess that might be a headstart!
Anyways do leave a comment if anyone tried making the recovery or resurrection remix is rom!! That would be great!!
Root aquired for J810Y and probably for all models.
You will need the stock Rom files from Sammobile for your phone model(BL, AP, CP, HOME CSC) and Odin on your PC.
1. Install Magisk manager on your phone.
2 Copy the AP file on your Download folder of your phone.
3 Open Magisk and tap Install Magisk then Select and patch a file. Go on Download folder and select the AP file to patch. After is done it will create a file in your Download folder named magisk_patched.tar. Copy this file back on your PC.
4 Run Odin and put your phone on Download mode. To get in Download mode shut your phone off, Hold pressed VOLUME UP + POWER, select Reboot to bootloader.
5 In Odin select BL, CP and Home_CSC from your stock ROM folder. In AP select the magisk_patched.tar file. Go on Optons and uncheck Auto Reboot. Hit START and let him finish. IMPORTANT, READ FIRST : After is done you have to restart the phone by pressing VOLUME DOWN + POWER and when the screen is black immediately press VOLUME UP + POWER. Dont let go until you are in Recovery mode, even if restarts.
5 select Wipe data/ factory reset and then Reboot system now. Might take a while to boot.
6 Set up your phone and install Magisk Manager again. It will ask you to complete the rooting will need to install few more files. Press OK.
WELL DONE. You have root now.
Is there any way to root without lose massage and call log?
nechita said:
Root aquired for J810Y and probably for all models.
You will need the stock Rom files from Sammobile for your phone model(BL, AP, CP, HOME CSC) and Odin on your PC.
1. Install Magisk manager on your phone.
2 Copy the AP file on your Download folder of your phone.
3 Open Magisk and tap Install Magisk then Select and patch a file. Go on Download folder and select the AP file to patch. After is done it will create a file in your Download folder named magisk_patched.tar. Copy this file back on your PC.
4 Run Odin and put your phone on Download mode. To get in Download mode shut your phone off, Hold pressed VOLUME UP + POWER, select Reboot to bootloader.
5 In Odin select BL, CP and Home_CSC from your stock ROM folder. In AP select the magisk_patched.tar file. Go on Optons and uncheck Auto Reboot. Hit START and let him finish. IMPORTANT, READ FIRST : After is done you have to restart the phone by pressing VOLUME DOWN + POWER and when the screen is black immediately press VOLUME UP + POWER. Dont let go until you are in Recovery mode, even if restarts.
5 select Wipe data/ factory reset and then Reboot system now. Might take a while to boot.
6 Set up your phone and install Magisk Manager again. It will ask you to complete the rooting will need to install few more files. Press OK.
WELL DONE. You have root now.
Click to expand...
Click to collapse
man thank you all the useless tutorials in youtube you saved my time bro