Hi, I need help to install a working rom. Any build will do.
I have a P9 lite, 3gb, dual sim. Bought in Norway. I think Its called VNS-L31C432.
I updated to Nougat but the bluetooth does not work.
So i want another rom with bluetooth. But now Im stuck on VNS-L31C900B300.
The bootloader screen shows "Phone unlocked" (I unlocked it with SRKTool) and "FRP lock"
In developer setting the "enable OEM unlock" is off and grey color.
I cannot use the dload-method, I get "software install failed!"
I cannot install twrp with fastboot, I get "FAILED (remote: Command not allowed)"
I also tried to relock bootloader (fastboot oem relock *****************" but I get "FAILED (remote: root type is risk)".
Seem like SOMETHING is stopping me from messing more with the phone.
Please point me in the right direction, someone?
try to rollback with those 2 files i provide you,
1 st the small firmware and after the 1.6gb one ~ dont forget this !
http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl
magnemann said:
Hi, I need help to install a working rom. Any build will do.
I have a P9 lite, 3gb, dual sim. Bought in Norway. I think Its called VNS-L31C432.
I updated to Nougat but the bluetooth does not work.
So i want another rom with bluetooth. But now Im stuck on VNS-L31C900B300.
The bootloader screen shows "Phone unlocked" (I unlocked it with SRKTool) and "FRP lock"
In developer setting the "enable OEM unlock" is off and grey color.
I cannot use the dload-method, I get "software install failed!"
I cannot install twrp with fastboot, I get "FAILED (remote: Command not allowed)"
I also tried to relock bootloader (fastboot oem relock *****************" but I get "FAILED (remote: root type is risk)".
Seem like SOMETHING is stopping me from messing more with the phone.
Please point me in the right direction, someone?
Click to expand...
Click to collapse
Hello,
If you are already at your last chance
hope this will give you the "right direction"...
It looks very similar than your situation...
Regards:fingers-crossed:
https://forum.xda-developers.com/hu...ution-bl-unlockedfrp-locked-fastboot-t3684302
Kcetin20 said:
try to rollback with those 2 files i provide you,
1 st the small firmware and after the 1.6gb one ~ dont forget this !
http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl
Click to expand...
Click to collapse
Thanks for answering
I placed the rollback file UPDATE.APP in dload folder on sd card and held volup+voldown+power.
It updated sucessful, then restarted. Then it started reset user data but stopped at 16% with "reset failed".
So I did not try to flash the main file.... Hmm..
And one more thing.
If I hold volup key when booting, I come to a EMUI screen where I can have a factory reset.
But factory reset fails at 18%. Dont know why.
wiping cache here works ok.
Dadditz said:
Hello,
If you are already at your last chance
hope this will give you the "right direction"...
It looks very similar than your situation...
Regards:fingers-crossed:
https://forum.xda-developers.com/hu...ution-bl-unlockedfrp-locked-fastboot-t3684302
Click to expand...
Click to collapse
Thanks, man.
Yes it IS similar. But I fail at step 3 in relocking bootloader.
"fastboot oem relock ******************"
gives
FAILED (remote: root type is risk)
finished. total time: 0.006s
so I cannot continue the rest of the guide. :crying:
Cya all tomorrow. Here its bedtime.
Related
Dear All,
I have a Problem with my Moto X play XT 1562. I have brought it a year back.
For some strange reason, My phone stopped working all of a sudden.
when I connect it to a PC via USB I'll get a boot-loader menu which says "StartUp failed Please connect the phone to a software repair assistant on the PC". Though I have figured out the problem I am unable to do anything about it.The problem is simple yet complex at the same time,
Problem: Though I have rooted many android phones previously, I never rooted this one. So My boot-loader is locked. I have got the Unique unlock key from Motorola site But when I get to this commad
HTML:
fastboot oem unkock [MY_UNLOCK_KEY]
I get an error message saying "Check 'Allow unlock OEM' in developer options". But my phone is not booting so far so that I can check that.
The basic problem is, My phone's OS is corrupted and I am unable to boot a new OS to it, As the boot loader is locked, I am unable to unlock the boot loader because I have not checked on 'Allow OEM unlock'. I am unable to check 'Allow OEM Unlock' because I The os is corrupted. - (This looks like a riddle )
1.Is there any way I can either bypass this?
2.Is there any way I can check 'Allow unlock OEM' using fastboot or any other tool?
I have tried the following already,
1.tried to clear user data and cache with fastboot - Still remains the same
2.tried to flash a recovery image even though the boot-loader is locked - No Use.
3.contacted service centre just to realise that I have to change the PCB which will cost me a new phone!
Can anyone of you please help me out with this.
Thanks a Ton in Advance.
pldeep said:
Dear All,
I have a Problem with my Moto X play XT 1562. I have brought it a year back.
For some strange reason, My phone stopped working all of a sudden.
when I connect it to a PC via USB I'll get a boot-loader menu which says "StartUp failed Please connect the phone to a software repair assistant on the PC". Though I have figured out the problem I am unable to do anything about it.The problem is simple yet complex at the same time,
Problem: Though I have rooted many android phones previously, I never rooted this one. So My boot-loader is locked. I have got the Unique unlock key from Motorola site But when I get to this commad
HTML:
fastboot oem unkock [MY_UNLOCK_KEY]
I get an error message saying "Check 'Allow unlock OEM' in developer options". But my phone is not booting so far so that I can check that.
The basic problem is, My phone's OS is corrupted and I am unable to boot a new OS to it, As the boot loader is locked, I am unable to unlock the boot loader because I have not checked on 'Allow OEM unlock'. I am unable to check 'Allow OEM Unlock' because I The os is corrupted. - (This looks like a riddle )
1.Is there any way I can either bypass this?
2.Is there any way I can check 'Allow unlock OEM' using fastboot or any other tool?
I have tried the following already,
1.tried to clear user data and cache with fastboot - Still remains the same
2.tried to flash a recovery image even though the boot-loader is locked - No Use.
3.contacted service centre just to realise that I have to change the PCB which will cost me a new phone!
Can anyone of you please help me out with this.
Thanks a Ton in Advance.
Click to expand...
Click to collapse
You can still flash the firmware that is meant for your model/carrier without unlocking bootloader. run getvar all command in fastboot to determine what firmware exatly do you need if unsure.
minimale_ldz said:
You can still flash the firmware that is meant for your model/carrier without unlocking bootloader. run getvar all command in fastboot to determine what firmware exatly do you need if unsure.
Click to expand...
Click to collapse
Can you please guide me trough the steps in a very vauge way(I'll be able to folllow) thanks a ton for the response
pldeep said:
Can you please guide me trough the steps in a very vauge way(I'll be able to folllow) thanks a ton for the response
Click to expand...
Click to collapse
Connect your phone in fastboot mode and type this command:
Code:
fastboot getvar all
in output look for this:
Code:
(bootloader) ro.build.fingerprint:
It's the firmware version that you currently have on your phone. Download exactly the same one and you'll be able to flash it with bootloader locked.
minimale_ldz said:
Connect your phone in fastboot mode and type this command:
Code:
fastboot getvar all
in output look for this:
Code:
(bootloader) ro.build.fingerprint:
It's the firmware version that you currently have on your phone. Download exactly the same one and you'll be able to flash it with bootloader locked.
Click to expand...
Click to collapse
Hey Sorry minimale_ldz,
I got it till this step. I wanted to know what command should I use to flash the os into the phone.
I know how to do Recovery though
HTML:
Fastboot flash recovery recovery.img
I want to know how to do the same with OS.
Thanks again
pldeep said:
Hey Sorry minimale_ldz,
I got it till this step. I wanted to know what command should I use to flash the os into the phone.
I know how to do Recovery though
HTML:
Fastboot flash recovery recovery.img
I want to know how to do the same with OS.
Thanks again
Click to expand...
Click to collapse
You've got instructions in this thread:
https://forum.xda-developers.com/mo...de-how-to-flash-factory-image-return-t3261486
Mind that you'll likely have more system.img_sparsechunk files, so make sure you flash all of them (just change commands accordingly).
Guys I had no luck in doing that.
When ever I try to flash the contents of the stock os, I get a error message which says Pre Flash validation failed.
Can any one help me please
pldeep said:
Guys I had no luck in doing that.
When ever I try to flash the contents of the stock os, I get a error message which says Pre Flash validation failed.
Can any one help me please
Click to expand...
Click to collapse
Your emmc ship is corrupt. That means your whole storage is broken and not fixable.
But i am able to flash some of the contents of the stock ROM. I get this "Pre flash validation failed" error only when I try to flash some of the files like (system.img_sparsechunk.0-9,recovery.img and gpt.bin). I even tried to reset the emmc_chip, I says that the command was succesfully executed.
Is there any other option left??
I am fighting this battle since a week now.
pldeep said:
Dear All,
I have a Problem with my Moto X play XT 1562. I have brought it a year back.
For some strange reason, My phone stopped working all of a sudden.
when I connect it to a PC via USB I'll get a boot-loader menu which says "StartUp failed Please connect the phone to a software repair assistant on the PC". Though I have figured out the problem I am unable to do anything about it.The problem is simple yet complex at the same time,
Problem: Though I have rooted many android phones previously, I never rooted this one. So My boot-loader is locked. I have got the Unique unlock key from Motorola site But when I get to this commad fastboot oem unkock [MY_UNLOCK_KEY]
I get an error message saying "Check 'Allow unlock OEM' in developer options". But my phone is not booting so far so that I can check that.
The basic problem is, My phone's OS is corrupted and I am unable to boot a new OS to it, As the boot loader is locked, I am unable to unlock the boot loader because I have not checked on 'Allow OEM unlock'. I am unable to check 'Allow OEM Unlock' because I The os is corrupted. - (This looks like a riddle )
1.Is there any way I can either bypass this?
2.Is there any way I can check 'Allow unlock OEM' using fastboot or any other tool?
I have tried the following already,
1.tried to clear user data and cache with fastboot - Still remains the same
2.tried to flash a recovery image even though the boot-loader is locked - No Use.
3.contacted service centre just to realise that I have to change the PCB which will cost me a new phone!
Can anyone of you please help me out with this.
Thanks a Ton in Advance.
Click to expand...
Click to collapse
Bull**** about the PCB. Use RsdLite, had the same issue. Flash the latest package and use the USB at the back of the PC
kpamkar said:
Bull**** about the PCB. Use RsdLite, had the same issue. Flash the latest package and use the USB at the back of the PC
Click to expand...
Click to collapse
Hey Kpamkar,
I have tried it with RSD Lite, But no luck. on the RSD interface it says that flash failed,
On the mobile it says
version downgraded for primary_gpt
Can you please help me out with the latest stock rom for Moto x play, I am unable to get the exact stock rom any where, I have looked at this link: https://github.com/motoxplay/stock
My phone finger prints details are as follows(I got it with
HTML:
fastboot getvar all
command):
ro.build.fingerprint[0]: motorola/lux_retasia_ds/lux_uds:6.
ro.build.fingerprint[1]: 0.1/MPDS24.107-70-1-5/5:user/relea
ro.build.fingerprint[2]: se-keys
ON the phone these are the details that are shown:
baseband version:M8936_2020632.44,03.21.57R LUX_EMEA_DSDS_CUST
Product/Variant: LUX XT1562 32GB P2C
It wold be great if you could please share with me any kind of links that you have used which can guide me through this whole process.
Thanks a lot again!
pldeep said:
Hey Kpamkar,
I have tried it with RSD Lite, But no luck. on the RSD interface it says that flash failed,
On the mobile it says
version downgraded for primary_gpt
Can you please help me out with the latest stock rom for Moto x play, I am unable to get the exact stock rom any where, I have looked at this link: https://github.com/motoxplay/stock
My phone finger prints details are as follows(I got it with fastboot getvar all
command):
ro.build.fingerprint[0]: motorola/lux_retasia_ds/lux_uds:6.
ro.build.fingerprint[1]: 0.1/MPDS24.107-70-1-5/5:user/relea
ro.build.fingerprint[2]: se-keys
ON the phone these are the details that are shown:
baseband version:M8936_2020632.44,03.21.57R LUX_EMEA_DSDS_CUST
Product/Variant: LUX XT1562 32GB P2C
It wold be great if you could please share with me any kind of links that you have used which can guide me through this whole process.
Thanks a lot again!
Click to expand...
Click to collapse
In my case I had. 52 version of the ROM. I had a locked bootloader boot loop. But I was able to fix it using rsdLite. Are you using the latest version of the firmware and connecting the ports at the back of the pc? Also install proper drivers
You need to use RETASIA DS, the most recent version
@pldeep
firmware is here.
minimale_ldz said:
@pldeep
firmware is here.
Click to expand...
Click to collapse
Tried this. But no luck.
It still shows the same error "version downgrade for gpt_bin"
pldeep said:
Tried this. But no luck.
It still shows the same error "version downgrade for gpt_bin"
Click to expand...
Click to collapse
try flashing it without gpt.bin and bootloader
Try booting into twrp without flashing it. Use fastboot boot command
---------- Post added at 08:44 PM ---------- Previous post was at 08:29 PM ----------
pldeep said:
Tried this. But no luck.
It still shows the same error "version downgrade for gpt_bin"
Click to expand...
Click to collapse
What are you trying to flash?
Same problem over here... Did you solve it?
Downloading right now the latest rom image for Moto X Play from this site.... //firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1563/
Hey install Fastboot files and download twrp image for Lux and place it in the Fastboot folder.
Then run :- Fastboot reboot recovery.img
It will boot to twrp.
Any update for this? I'm in a similar situation now :-/
Tried RSD, it doesn't see my device (fastboot and adb works fine)
install Fastboot files and download twrp image for Lux and place it in the Fastboot folder.
Click to expand...
Click to collapse
How can I do that?
Also, someone mentioned emmc_chip reset - how to do that?
Thanks
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
What did you do exactly to end with endless bootloop?
I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.
gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???
KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...
i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0
delete
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do
I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.
bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...
Hello,
Yesterday when I Wanting to charge the battery of my phone, it's suddenly turned off, and since it is stuck on the startup screen..
I have traveled dozens of French forums in search of a solution, I come back to you now because I am a little desperate
As for my phone, he was never rooted, and I never change firnware, I do not have access to recovery, there is only fastboot mode that works
In the fastboot mode, i can read "ap-s-abnormal-n/a et phone locked frp lock".
If I understand correctly, I can not flash my phone because it is blocked..
Please help me
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
TheOldMan said:
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
Click to expand...
Click to collapse
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Noflex said:
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Click to expand...
Click to collapse
Unlock bootloader again
Adi5 said:
Unlock bootloader again
Click to expand...
Click to collapse
With pleasure but how ?
When I try to do this in fastboot i have this
Code:
... FAILED (remote: Command not allowed)
My only solution at this time is DC phoenix unlocker but i'm not sure about the fiability, and I don't want pay for this..
Hi, I have Asia-Pacific version of the Huawei Mediapad M3 (BTV-W09C209B005). I'm trying to flash TWRP to gain root access, but I'm encountering problems in the preliminary stage. I've searched for similar problems in the forum, but couldn't find a solution that works for me.
So here are the steps I've done:
1. I received the official bootloader code from Huawei.
2. I used ADB and Fastboot to unlock the bootloader, but I noticed something peculiar: the screen says
Phone UNLOCKED
FRP UNLOCKED
I am the first owner of the tablet, so I was surprised to see that it was already unlocked. In any case, I tried the fastboot oem unlock command, and it returned this error:
FAILED (remote: password wrong)
3. I tried to proceed to TWRP flash on the assumption that the phone was already unlocked. But I get this error:
sending 'recovery' (23794 KB)....
OKAY [ 0.740s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished, total time: 0.740s
4. I tried relocking the bootloader, as per several XDA threads, before unlocking again. But I once again encounter an error:
FAILED (remote: stat not match)
I already contacted Huawei to make sure that the unlock code they sent me was correct, but I doubt that it'd be wrong because they probably just paste it after generating it in the system.
Any ideas how to proceed?
Interesting, first off if you want to check and see if you phone is BL is unlocked go to Settings, Developer Options and see if your OEM unlocking is grayed or doesn't move..if it doesn't move or grayed out then it's unlocked.. if it moves the it not unlocked.. check that your fastboot /adb are set up correctly. Though the easiest way to this ( unlocking the BL and flashng TWRP) would be to get Huawei Multi-Tool v8 by Team MT and use it,, ( grab the one in the Honor 8, as I know it does work) and make sure you ave the correct TWRP for your tablet..
lilbrat said:
Interesting, first off if you want to check and see if you phone is BL is unlocked go to Settings, Developer Options and see if your OEM unlocking is grayed or doesn't move..if it doesn't move or grayed out then it's unlocked.. if it moves the it not unlocked.. check that your fastboot /adb are set up correctly. Though the easiest way to this ( unlocking the BL and flashng TWRP) would be to get Huawei Multi-Tool v8 by Team MT and use it,, ( grab the one in the Honor 8, as I know it does work) and make sure you ave the correct TWRP for your tablet..
Click to expand...
Click to collapse
Thanks for pointing me the Huawei multi-tool. So I tried that, and as suspected, the device is still locked. I am able to toggle the OEM unlocking and the tool says so through the lock status (oem lock-state info LOCKED). I proceeded unlocking with the tool, but I received the same error: FAILED (remote: password wrong)
The unlock code doesn't seem to be the problem because the tool displayed the corresponding serial number and it was a match. So there's something preventing me from unlocking the bootloader--it's probably the same reason why the fastboot says "PHONE Unlocked" even though it actually isn't. Again, I can't do the relock trick because the device wouldn't accept the Huwei unlock code.
Thoughts?
Hmm, why do some of these seem to be so picky when it comes to unlocking.. The multi too will copy what ever code you but in, sorry for the questions just trying to help narrow it down.. in the developer section there are 3 things that need to be ticked,, OEM unlocking, USB debugging and and allow ADB debugging in charge only mode.. Maybe you software got out of wack.. read here ( https://forum.xda-developers.com/mediapad-m3/help/bricked-mediapad-m3-t3746893) as it may help.. Not sure if HiSuite can restore it.
OEM unlocking and USB debugging are "working" in the sense that I can send commands from the PC via USB. It's just that I can't properly unlock the phone. I updated the drivers to see if that's the problem, but I still encounter the same error. I basically couldn't move forward with the link you sent because the first step was to unlock the device and I couldn't get past that. When I try to unlock the error is still 'FAILED (remote: password wrong)'.
I've seen some threads from other Huawei devices that suggest rolling back the firmware, but this is the first time I'm trying to root this device. And it's still on Marshmallow, which is the version that came with the first release of the Mediapad M3, so basically there's nothing to roll back to.
Why not upgrade to 7 as that is where most of the newer threads are written for plus it will redo your boot loader... giving you a clean slate to work with..and that might be your issue..
I can't update to 7 because Huawei stopped providing updates for my region. I failed to mention that the reason why I'm trying to unlock the device is to change the region and upgrade to 7.
May I ask where you are?
From Southeast Asia, but the tablet was imported from China. I planned to convert it to the European version so I can at least upgrade to Nougat. I'm still stuck though.
So Huawei sent me a new unlock key and it works! Problem solved!
cescpistol said:
From Southeast Asia, but the tablet was imported from China. I planned to convert it to the European version so I can at least upgrade to Nougat. I'm still stuck though.
Click to expand...
Click to collapse
Imy model also seas... Has updated to nougat without changging to us.
Hello,
My Huawei P10 lite Single Card (WAS-LX1A) bricked after i tried to Update from 8.0 to 8.1,
now it just boots to fastboot and i cant Flash anything.
(Idk why but somehow it just boots fastboot when its connected to the pc and i have to change the cable in fastboot since the one i boot it with doesnt detect fastboot, and the cable works with fastboot doesnt boot it up.)
When i try to install an recovery it works, but when i try to boot my phone it just gives me the error screen, trying to install anything else just gives me the following Errors:
"Partition length error" or
"command not allowed" Bootloader is unlocked.
Please help me
not even the "dload" method works since this one isnt starting too.
dload won't work since you have upgraded to EMUI 8 and you can only use B181 to dload install, which is EMUI 5.1. Try HwOTA8 to downgrade to Android 7:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
Use the guide in the post.
But before that, in bootloader under "bootloader unlocked", you have to check if there is "frp lock" or "frp unlock". If it's lock, you can't flash anything and you have to unlock it. If you have frp lock, write here and I will try to find a zip file I've seen in the forum for frp unlocking.
Also, can you tell me which ROM you tried to flash? I didn't know there is Android 8.1 for this phone, can you send me a link?
Stiliyan said:
dload won't work since you have upgraded to EMUI 8 and you can only use B181 to dload install, which is EMUI 5.1. Try HwOTA8 to downgrade to Android 7:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
Use the guide in the post.
But before that, in bootloader under "bootloader unlocked", you have to check if there is "frp lock" or "frp unlock". If it's lock, you can't flash anything and you have to unlock it. If you have frp lock, write here and I will try to find a zip file I've seen in the forum for frp unlocking.
Also, can you tell me which ROM you tried to flash? I didn't know there is Android 8.1 for this phone, can you send me a link?
Click to expand...
Click to collapse
Both unlocked but i tried to install EMUI 8.1 (8.0 worked tho) i got 8.1 on xda just like i did with 8.0
not exactly which…
but could it be that the cable Transfers files wrong? its a bit damaged
it
(when i try to Flash a recovery as example)
I don't know, try another cable if you have at home, if still not working try if HwOTA8 can flash the required recoveries.
Stiliyan said:
I don't know, try another cable if you have at home, if still not working try if HwOTA8 can flash the required recoveries.
Click to expand...
Click to collapse
Yeah i will try HWOTA 8 and already ordered a new cable
ShadowForceHD said:
Yeah i will try HWOTA 8 and already ordered a new cable
Click to expand...
Click to collapse
HWOTA did not work and this is the message i get when booting:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
this is the command i use and the message i get when i install twrp:
C:\Windows\system32>fastboot flash recovery_ramdisk C:\Users\my name\Downloads\twrp_3.2.1-0_Oreo_V3.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16506 KB)...
OKAY [ 0.423s]
writing 'recovery_ramdisk'...
OKAY [ 0.125s]
finished. total time: 0.548s
i dont know what to do anymore
ShadowForceHD said:
HWOTA did not work and this is the message i get when booting:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
this is the command i use and the message i get when i install twrp:
C:\Windows\system32>fastboot flash recovery_ramdisk C:\Users\my name\Downloads\twrp_3.2.1-0_Oreo_V3.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16506 KB)...
OKAY [ 0.423s]
writing 'recovery_ramdisk'...
OKAY [ 0.125s]
finished. total time: 0.548s
i dont know what to do anymore
Click to expand...
Click to collapse
update:
i just noticed something....
when i got bricked my device said that frp and bootloader was unlocked but this wasn't the case, bootloader was locked and i could use oem "unlock code" just like it was never unlocked even when it said that bootloader is unlocked.....
may this be the same case with my FRP? this is was dc unlocker says:
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
but i got no money for this program to unlock my frp or try to do it...someone got a similiar program?
you should check it too if you had a similiar problem just like me
did you found solution ?
ShadowForceHD said:
update:
i just noticed something....
when i got bricked my device said that frp and bootloader was unlocked but this wasn't the case, bootloader was locked and i could use oem "unlock code" just like it was never unlocked even when it said that bootloader is unlocked.....
may this be the same case with my FRP? this is was dc unlocker says:
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
but i got no money for this program to unlock my frp or try to do it...someone got a similiar program?
you should check it too if you had a similiar problem just like me
Click to expand...
Click to collapse