Database Users

Android Wear in AOSP/OpenSource?

Hello,
I just wanted to know if the Android Wear Project is also getting open source, cause we have so many Smartwatches that are allready based on Android (Gear, Moto Actv,...) so porting Android Wear over to them is not the hardest thing.
If you find something, please let me know!
Regards

Yes, IMO a VERY important question that hasn't been answered yet.
I would be concerned that Google felt it was TOO open with Android proper and tried to restrict Wear even more.
If the current preview emulator is a good indication, then Wear is just another variant of Android. Many normal apps can run on it right now, though with issues. I tested my own app and it more or less worked, with a squished UI.
So I think a LOT of the Wear code is effectively already IN AOSP already.
But will Google release enough Wear specific code for custom ROMs to be built ? I very much hope so.

i
That will be gr8
custom launchers
like wht devs did on galaxy gear (they installed nova launcher on it)
or using custom keyboard like minuum beside voice input.
system dump;
source

Praying for a port of Android Wear for Galaxy Gear!!!!

traxxasislife said:
Praying for a port of Android Wear for Galaxy Gear!!!!
Click to expand...
Click to collapse
Prayer is the only remote hope you have, I think.
There are reasons Gears are going cheap now.
You really think Samsung won't take every opportunity to sell you new wearables, EVERY year at least ?
EVERY few months, new, "in fashion" designs.
Every year, moar cores, LOL.
We'll be overclocking on both wrists to keep our hands warm in winter...

mikereidis said:
We'll be overclocking on both wrists to keep our hands warm in winter...
Click to expand...
Click to collapse
That's genius! Perfect winter accessory:silly:

Android wear without wear
Couldn't we just built a custom android wear version which is based on one of the regular open source android versions? Like e.g. android kitkat with a special launcher and a way to display notifications similar to android wear

Finkes said:
Couldn't we just built a custom android wear version which is based on one of the regular open source android versions? Like e.g. android kitkat with a special launcher and a way to display notifications similar to android wear
Click to expand...
Click to collapse
IMO they're going to need to for it to be usable by the pro-android anti-google crowd.
I have the LG G Watch and I have it unlocked with TWRP and a custom ROM on it. However it still can't connect to my phone unless I have a Google account on it, so I can use the Play Store to download the Android Wear app and connect it via Bluetooth.
So I figured "fine whatever, I'll just put it in airplane mode and use it as a regular watch until someone comes up with an Open Source solution" right?
Wrong, turns out I CAN'T EVEN CHANGE THE TIME! It updates that from the phone which updates from the time servers on the net. Good thing I have an older phone that I can stick Google on to work with it I guess.
All I want is my texts on my watch without having to get spied upon by the almighty Google.
Also, they should call it AWOSP because it sounds awesome.

[Q] Sourcing from China (with Android)

I want to source an Android smart watch from China for a project am working on. I want to change the menu interface it comes with and replace with a custom interface specific for my purpose (means no custom control to intended audience).
Thoughts Needed
Does anyone here have a similar experience?
Are they good at customizing ROMs and interfaces according to requirements?
If not, how easy is it to hire somebody to build a custom ROM with custom interface (for say MTK6572)?
Any recommended suppliers you know?
Phase 1 MUST HAVE Minimum Requirements - 100 Units Order
Android OS
GSM/GPS
Touch screen
Mic/Speaker
Charging points on the back side (no micro-usb slot on the side)
Shortlisted AK-S5 or AK-S7
Phase 2 MUST HAVE Minimum Requirements
All from Phase 1
IP67 or IP68
Magnetic based charger point on the backside
Heart rate sensor at the backside
Shortlisted - None available yet

abuduri said:
I want to source an Android smart watch from China for a project am working on. I want to change the menu interface it comes with and replace with a custom interface specific for my purpose (means no custom control to intended audience).
Thoughts Needed
Does anyone here have a similar experience?
Are they good at customizing ROMs and interfaces according to requirements?
If not, how easy is it to hire somebody to build a custom ROM with custom interface (for say MTK6572)?
Any recommended suppliers you know?
Phase 1 MUST HAVE Minimum Requirements - 100 Units Order
Android OS
GSM/GPS
Touch screen
Mic/Speaker
Charging points on the back side (no micro-usb slot on the side)
Shortlisted AK-S5 or AK-S7
Phase 2 MUST HAVE Minimum Requirements
All from Phase 1
IP67 or IP68
Magnetic based charger point on the backside
Heart rate sensor at the backside
Shortlisted - None available yet
Click to expand...
Click to collapse
Please note: to date no Chinese Android watches are IP67, even the ones that provide proof of IP certification, I've learned that the hard way
AK-55 is the Z01
The AK-S7 is or looks like ZGPAX S7
I'm sure you have experience dealing with Chinese sellers, but if you don't . .. . be extremely careful, even using Paypal, trust no one!

simple1i said:
Please note: to date no Chinese Android watches are IP67, even the ones that provide proof of IP certification, I've learned that the hard way
AK-55 is the Z01
The AK-S7 is or looks like ZGPAX S7
I'm sure you have experience dealing with Chinese sellers, but if you don't . .. . be extremely careful, even using Paypal, trust no one!
Click to expand...
Click to collapse
Thanks a lot @simple1i.
I have a chicken-egg question ... Which came first - AK-S5 or Z01? Which of these (or among numerous others on Alibaba) is "original" (designed first)? If there is no traceback and everyone is using the same reference design, as long as it works as intended, does it matter? I did get this supplier to show me the watch on skype video (though it doesn't prove anything).
My main question is - if the supplier really has a "fully working version" of S5 or Z01, and is ready to supply - they also say they will do ODM - any experience on their skills to make a custom ROM and change the menu interface to my needs? If not, anyone here willing to build the ROM and interface (paid)?

x201 model
abuduri said:
Thanks a lot @simple1i.
I have a chicken-egg question ... Which came first - AK-S5 or Z01? Which of these (or among numerous others on Alibaba) is "original" (designed first)? If there is no traceback and everyone is using the same reference design, as long as it works as intended, does it matter? I did get this supplier to show me the watch on skype video (though it doesn't prove anything).
My main question is - if the supplier really has a "fully working version" of S5 or Z01, and is ready to supply - they also say they will do ODM - any experience on their skills to make a custom ROM and change the menu interface to my needs? If not, anyone here willing to build the ROM and interface (paid)?
Click to expand...
Click to collapse
I started looking into smartwatches on XDA from Mar 2014, so my history before then is limited. For me it started with the Omate TrueSmart, their Kickstarter campaign that promised it all and delivered a lie. I could be wrong, but Omate made the watch first (x201) and the rest copied (or someShenzhen firm made it first and Omate copied ) @pizzaman77 - knows the full history of Omate clones x201. But yes, now it does not matter as long as it works.
As for the development, you might get lucky and find that someone is already doing what you want or similar on the Omate forum - search on the Android development threads. I'm not a dev, so I don't if the Chineses sellers have the skills, doubt it. But the Devs on XDA will have. Look at this Omate thread: http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 - lots of dev going on on the Omate and its clones.
@kuronosan - is a key dev, still active, he might be able to help with paid work. You should start with making a new thread in the Omate Dev forum with your request.
@Lokifish Marz - knows a loooot but is not too actives these days
Please keep me informed on your dev plans (if its not top secret ) - i really really want to also buy a bulk order (maybe only 5 to start with) from China and sell them in the UK, but i need to join someone who is ordering in bulk so that i CAN only buy 5 units to start with. The other issue is i would need to fix any software issues first then sell them and if they sell then buy more. Can PM me if you wish. Thanks.

simple1i said:
I started looking into smartwatches on XDA from Mar 2014, so my history before then is limited. For me it started with the Omate TrueSmart, their Kickstarter campaign that promised it all and delivered a lie. I could be wrong, but Omate made the watch first (x201) and the rest copied (or someShenzhen firm made it first and Omate copied ) @pizzaman77 - knows the full history of Omate clones x201. But yes, now it does not matter as long as it works.
As for the development, you might get lucky and find that someone is already doing what you want or similar on the Omate forum - search on the Android development threads. I'm not a dev, so I don't if the Chineses sellers have the skills, doubt it. But the Devs on XDA will have. Look at this Omate thread: http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 - lots of dev going on on the Omate and its clones.
@kuronosan - is a key dev, still active, he might be able to help with paid work. You should start with making a new thread in the Omate Dev forum with your request.
@Lokifish Marz - knows a loooot but is not too actives these days
Please keep me informed on your dev plans (if its not top secret ) - i really really want to also buy a bulk order (maybe only 5 to start with) from China and sell them in the UK, but i need to join someone who is ordering in bulk so that i CAN only buy 5 units to start with. The other issue is i would need to fix any software issues first then sell them and if they sell then buy more. Can PM me if you wish. Thanks.
Click to expand...
Click to collapse
Thanks a ton @simple1i. I will start a thread there.
Do you know any Android watches that fit my Phase 2 requirements (couldn't find any on Alibaba or similar sites)?
I did find a few watches fitting my spec without Android (either Nucleus or similar). Is it advisable to build on those platforms given that Android is now into wearables Reason I chose Android is because I want to be able to easily change supplier and/or watch hardware (looks) later easily and just port the code/functionality rather than getting locked. Else it will become an EXPENSIVE affair later. Am I right in thinking so?

abuduri said:
Thanks a ton @simple1i. I will start a thread there.
Do you know any Android watches that fit my Phase 2 requirements (couldn't find any on Alibaba or similar sites)?
I did find a few watches fitting my spec without Android (either Nucleus or similar). Is it advisable to build on those platforms given that Android is now into wearables Reason I chose Android is because I want to be able to easily change supplier and/or watch hardware (looks) later easily and just port the code/functionality rather than getting locked. Else it will become an EXPENSIVE affair later. Am I right in thinking so?
Click to expand...
Click to collapse
And yes @simple1i, I will definitely keep you in the loop on the bulk ordering.

abuduri said:
Thanks a ton @simple1i. I will start a thread there.
Do you know any Android watches that fit my Phase 2 requirements (couldn't find any on Alibaba or similar sites)?
I did find a few watches fitting my spec without Android (either Nucleus or similar). Is it advisable to build on those platforms given that Android is now into wearables Reason I chose Android is because I want to be able to easily change supplier and/or watch hardware (looks) later easily and just port the code/functionality rather than getting locked. Else it will become an EXPENSIVE affair later. Am I right in thinking so?
Click to expand...
Click to collapse
Yes I'd stick with Android, lots of resources available, gives more flexibility. I don't think Nucleus OS is a viable option yet, it would be too expensive.
I take it SIM is a requirement too? I'll look around, the IP67 is not available yet, maybe the Ironman 3rd generation might be IP67, but the company (Unova) is full of liars, I was ripped off with the 2nd generation, I proved it's not IP67. Other then the IP67 the rest might be available, you'll need to search for it on AliExpress.
What country are you from?

simple1i said:
Yes I'd stick with Android, lots of resources available, gives more flexibility. I don't think Nucleus OS is a viable option yet, it would be too expensive.
I take it SIM is a requirement too? I'll look around, the IP67 is not available yet, maybe the Ironman 3rd generation might be IP67, but the company (Unova) is full of liars, I was ripped off with the 2nd generation, I proved it's not IP67. Other then the IP67 the rest might be available, you'll need to search for it on AliExpress.
What country are you from?
Click to expand...
Click to collapse
Yes, with 2G. 3G really not needed but if it comes with it, cool. Couldn't find any with android and heart rate on back side, keeping IP67 on the side.
Am currently in Boston (originally from India).

simple1i said:
Yes I'd stick with Android, lots of resources available, gives more flexibility. I don't think Nucleus OS is a viable option yet, it would be too expensive.
I take it SIM is a requirement too? I'll look around, the IP67 is not available yet, maybe the Ironman 3rd generation might be IP67, but the company (Unova) is full of liars, I was ripped off with the 2nd generation, I proved it's not IP67. Other then the IP67 the rest might be available, you'll need to search for it on AliExpress.
What country are you from?
Click to expand...
Click to collapse
@simple1i ... is Android Wear OS same as Android 4.4 etc running on Z01 (and others) etc?

abuduri said:
@simple1i ... is Android Wear OS same as Android 4.4 etc running on Z01 (and others) etc?
Click to expand...
Click to collapse
Found the answer ... http://www.makeuseof.com/tag/what-operating-systems-do-wearable-devices-run-on/
Looks like Android Wear needs a compatible Android phone for it to work.
So, I'll stick with just Android.

General rules with Chinese Android smartwatches
Broken firmware
Major security holes
Little to no official support (this includes the phone side app)
English (or any other language other than Chinese) for the phone app is very rare
Incomplete source code (when you can even get it) that is a generic build pulled from a phone
Inconsistent battery life due to broken firmware
IP67 is more like IP54 if lucky
Poor build quality and QC by western standards
Not Lokifish supported (I've walked away from the industry as a whole until they get their collective heads out of their butts)
kuronosan's time is limited so fixes may be slow
Depending on your needs and goals. Talk to Ingenic. The HW is a little slow on the Newton (SmartQ Z uses it), not sure about the Newton 2. Either way they have source (Linux, Android, etc). The package is small enough that you could design and build a smartwatch that's about the same size as a real watch, but the display will need a new "crystal" to pull it off nicely. Find a compatible round display, and you should be able to use off the shelf watch cases with minor modifications giving you a 200m diver's smartwatch if you do it right.
*Side note
Even with a 1/2 million buy in for 3000 units we designed ourselves, Umeox still would not have provided source code, and little to no support. That's what the Chinese ODM's are like. kuronosan can verify this.

@abuduri - I'm not sure if my reply to your PM went thru? I can't see it in my sent folder. Did you get it?

I'm still working on stuff for the Omate. I just haven't actually had any free time as of late. I can't just take off of work to put work into a device that's difficult to troubleshoot. If I can be of any help let me know.

I've just started working with smartwatches, but I'm happy to help however I can. I'll be attempting some work on the s8, and I know my way around Android pretty well.

kuronosan said:
I'm still working on stuff for the Omate. I just haven't actually had any free time as of late. I can't just take off of work to put work into a device that's difficult to troubleshoot. If I can be of any help let me know.
Click to expand...
Click to collapse
@kuronosan @chainsol - thanks guys.
The thread for the new smartwatch is here, we have 5 people so far: http://forum.xda-developers.com/showthread.php?t=3115221 - including an electronic engineering. [emoji818]

firmware files of z01
abuduri said:
I want to source an Android smart watch from China for a project am working on. I want to change the menu interface it comes with and replace with a custom interface specific for my purpose (means no custom control to intended audience).
Thoughts Needed
Does anyone here have a similar experience?
Are they good at customizing ROMs and interfaces according to requirements?
If not, how easy is it to hire somebody to build a custom ROM with custom interface (for say MTK6572)?
Any recommended suppliers you know?
Phase 1 MUST HAVE Minimum Requirements - 100 Units Order
Android OS
GSM/GPS
Touch screen
Mic/Speaker
Charging points on the back side (no micro-usb slot on the side)
Shortlisted AK-S5 or AK-S7
Phase 2 MUST HAVE Minimum Requirements
All from Phase 1
IP67 or IP68
Magnetic based charger point on the backside
Heart rate sensor at the backside
Shortlisted - None available yet
Click to expand...
Click to collapse
need firmware files for z01 (android 5.1)

iTouch Air 2 Smartwatch - Anyone have any info?

I just bought an iTouch Air 2 smartwatch. But I cannot find ANY - I mean ANY - info on the tech specs, even on their supposed website.. It is available in many stores like Macy's, or Kohl's or Target etc. The website for the watch is
https://itouchwearables.com/products/itouch-air-2?variant=12482537717783
I cannot even add a new watch face besides the 3 pre-installed, which are pretty bad.
I would appreciate any info on this watch, and also if it can be hacked .... Thanks!!

chappatti said:
I just bought an iTouch Air 2 smartwatch. But I cannot find ANY - I mean ANY - info on the tech specs, even on their supposed website.. It is available in many stores like Macy's, or Kohl's or Target etc. The website for the watch is
https://itouchwearables.com/products/itouch-air-2?variant=12482537717783
I cannot even add a new watch face besides the 3 pre-installed, which are pretty bad.
I would appreciate any info on this watch, and also if it can be hacked .... Thanks!!
Click to expand...
Click to collapse
From the fcc pictures, it has a mt2502dv so it's an embedded CPU so no full android so you have limited hacking other than switching the watch face.
Google 2ALERITAIR2017 to get the pictures for yourself

deadman96385 said:
From the fcc pictures, it has a mt2502dv so it's an embedded CPU so no full android so you have limited hacking other than switching the watch face.
Google 2ALERITAIR2017 to get the pictures for yourself
Click to expand...
Click to collapse
Thank you so much!
Yes, I found the FCC pages, but there were only pics of the inside. I am not competent enough to figure out what it is. So thanks again.
Have you come across any kind of hacking for this hardware? I found a few Chinese pages, but is it possible to even modify the software in any way?

chappatti said:
Thank you so much!
Yes, I found the FCC pages, but there were only pics of the inside. I am not competent enough to figure out what it is. So thanks again.
Have you come across any kind of hacking for this hardware? I found a few Chinese pages, but is it possible to even modify the software in any way?
Click to expand...
Click to collapse
There is misc threads here on xda, but they don't seem to have progressed very much sadly.

Looking for info on any iTouch wearables devices. Especially the Air and Curve.
Like those before me, I've had an incredibly difficult time finding any technical info. Shame considering how cheap and widely available this device is.
The air is particularly puzzling as how to proceed. The charging port is not a standard USB and looks like there is no data transfer that route. Though I never before thought to ask this question, Google indicates others have: It may be possible to flash firmware over Bluetooth...
I got an Air as a gift, so no real loss if I mangle it beyond repair in the process of exploring. Given how cheap these things are, for $50 I'd even pick up a couple extra.
I'd like to be able to control smart-home devices via the watch. I think I could rig up something to communicate with a full Android device via Bluetooth -- like using a push notification or even sms to trigger an event - like to change a setting on my home thermostat.... but that's just circumventing the limitations of the iTouch and not actually adding something useful, so kinda boring.
What I'd really like to do is customize the interface on the watch itself.

W26 Smartwatches

Hi!
Does anyone know if there is any possibility to put another rom or use another app than the official one on these W26 watches?
I'm talking about Lemfo or Iwo W26.
Hardware doesn't look bad but software is awful.
Thanks in advance!

I cant find anything for this watch too. Perhaps we're searching for the wrong terms?

jveira said:
Hi!
Does anyone know if there is any possibility to put another rom or use another app than the official one on these W26 watches?
I'm talking about Lemfo or Iwo W26.
Hardware doesn't look bad but software is awful.
Thanks in advance!
Click to expand...
Click to collapse
I had mine delivered today (I got it as I'm moving away from Apple). The watch faces included are fairly average and I was hoping to find a good wxp. Unfortunately it doesn't have enough space available to actually install any.
I'd love to see a custom firmware will most of the watch faces removed to allow for the inclusion of others.
EDIT: I'll add that the official Apple Watch bands work with these watches - which is pretty cool

Hi All! First post here... Hey, were you able to get any reasonable measure out of the blood pressure/temperature/heart rate sensor? It seems completely fake to me. It seems to show pseudo random values around some mean. Even the charts you can see they're no more than a bunch of looped animations. It behaves the same if you strap it to a tree branch.
I was wondering maybe I just got a watch with an early or demo firmware version... But every reviewer I found on youtube just seems to play retard ignoring the fact or hiding it one way or another.
Please, could you confirm or deny your own watches's sensors to be fake?
Thanks in advance!

hellraiserii said:
Hi All! First post here... Hey, were you able to get any reasonable measure out of the blood pressure/temperature/heart rate sensor? It seems completely fake to me. It seems to show pseudo random values around some mean. Even the charts you can see they're no more than a bunch of looped animations. It behaves the same if you strap it to a tree branch.
I was wondering maybe I just got a watch with an early or demo firmware version... But every reviewer I found on youtube just seems to play retard ignoring the fact or hiding it one way or another.
Please, could you confirm or deny your own watches's sensors to be fake?
Thanks in advance!
Click to expand...
Click to collapse
The heart rate sensor does appear to be doing "something" - that is, if I don't have it on my wrist, it doesn't record a heart rate. But comparing the recordings with an apple watch (series 0) the values are not that accurate. The graph that is displayed in the heart rate app is just an animation and doesn't reflect the actual heart rate.
Saying that, I purchased the watch as a cheap replacement - for I'm leaving Apple's ecosystem - but this watch isn't the replacement. I will wear it though as it does have 3 days of battery (if auto wake is off), and I do get notifications from my phone, so it has that.
What I would like is the ability to use a different watch face - but trying to upload custom watch faces all fail with insufficient space. Oh well. Get what you pay for.
EDIT: I've just done a quick test:
1. remove the watch from my wrist and placed it on the desk
2. start the heart rate app
3. observe a heart rate in the high 70s to mid 80s
4. realise that the HR monitor on this watch is BS.
5. accept the fact that the HR monitor on this watch is BS and don't use the watch for HR monitoring.

Hi everyone I found this site
PLEASE TELL ME IS IT FOR IWO W26 WATCH OR ANYTHING ELSE I JUST CONFUSED
Download Iwo w26 firmware firmware - updated April 2023
Iwo w26 firmware Download Firmware for android - universal version, android Gingerbread version 2.3 - 2.3 2010 year, android Ice Cream Sandwich version 4 2011 year, android Jelly Bean version 4.1 - 4.3 2012 - 2013 years, android KitKat version 4.4 2013 year, android Lollipop version 5 - 5.1...
gofirmware.com

jveira said:
Hi!
Does anyone know if there is any possibility to put another rom or use another app than the official one on these W26 watches?
I'm talking about Lemfo or Iwo W26.
Hardware doesn't look bad but software is awful.
Thanks in advance!
Click to expand...
Click to collapse
I Found This website Plz Confirm me is it for Watch IWO W26 OR NOT.
Download Iwo w26 firmware firmware - updated April 2023
Iwo w26 firmware Download Firmware for android - universal version, android Gingerbread version 2.3 - 2.3 2010 year, android Ice Cream Sandwich version 4 2011 year, android Jelly Bean version 4.1 - 4.3 2012 - 2013 years, android KitKat version 4.4 2013 year, android Lollipop version 5 - 5.1...
gofirmware.com

Hello, Does anyone know how to update the version rom (firmware)? help meeee, I tried some code and MediaTek app, but still can't... help me pls! thanks!!

I guess in life, we get what we pay for.
This watch is a cheap toy. It may resemble an Apple watch in appearance
but functionally it does not even come close. If anything it is a fashion accessory
rather than a functional device. None of the health sensors work. The firmware can never be updated.
Battery life is atrocious. This little device only does three things.
Tell time, give notifications, and oddly, you can make and receive calls.
And it actually does those things very well. But for $30 USD what did I expect?

Yep, sounds just like a $30 toy watch

hellraiserii said:
Hi All! First post here... Hey, were you able to get any reasonable measure out of the blood pressure/temperature/heart rate sensor? It seems completely fake to me. It seems to show pseudo random values around some mean. Even the charts you can see they're no more than a bunch of looped animations. It behaves the same if you strap it to a tree branch.
I was wondering maybe I just got a watch with an early or demo firmware version... But every reviewer I found on youtube just seems to play retard ignoring the fact or hiding it one way or another.
Please, could you confirm or deny your own watches's sensors to be fake?
Thanks in advance!
Click to expand...
Click to collapse
Yes my smart watch's sensors is fake

Has anybody managed to crack a Chinese watch with Android OS and replaced it with Android Go?

I was thinking, with the new range of Chinese smartwatches and some having NFC (granted it's just door unlocking etc) but as some of them these days have heavy OS's like Android 8-10 (massive power hungry) why don't they opt for Android Go instead (which is specifically aimed at low specs?) would it be possible just to wipe the OS from one of these watches and stick Go on there instead (saving a **** ton of battery?) and in relation to my original thought, if it had NFC would it be possible to get Google wallet working as well?

i have the A-TGTGA CK 30 Smartwatch i would really like to do this if possible, the OS on this phone is very limited and the watch faces are not very good, i would to have the option to download new watch faces.

EdP0 said:
i have the A-TGTGA CK 30 Smartwatch i would really like to do this if possible, the OS on this phone is very limited and the watch faces are not very good, i would to have the option to download new watch face
Click to expand...
Click to collapse
Is it an Android watch? don't suppose you have a link to the watch you have as well?

seedaripper said:
Is it an Android watch? don't suppose you have a link to the watch you have as well?
Click to expand...
Click to collapse
Im not sure if it is an Android, i think it is. Here is a link from Amazon:
https://www.amazon.com/dp/B08LGYVP6T?ref=ppx_yo2ov_dt_b_product_details&amp=undefined&th=1&language=en_US
Thank you!

EdP0 said:
Im not sure if it is an Android, i think it is. Here is a link from Amazon:
https://www.amazon.com/dp/B08LGYVP6T?ref=ppx_yo2ov_dt_b_product_details&amp=undefined&th=1&language=en_US
Thank you!
Click to expand...
Click to collapse
That's not an Android OS watch mate, you can't do anything with that I'm afraid

seedaripper said:
That's not an Android OS watch mate, you can't do anything with that I'm afraid
Click to expand...
Click to collapse
I have the Oppo Watch 3 Pro that runs AOSP instead of Wear OS, which I love so much better. You can download and install phone apps fine, the battery lasts me over 5 days with normal use before I have to charge it. I'm just having issues trying to install Google Services which needs to be there for Google wallet to work in the first place. Still trying though! Otherwise, I'm so happy I bought this watch. It's running the new Snapdragon W5 Gen1 processor and it has never slowed down on me once