Latest update, no overlay software, not rooted.
Nova launcher.
Sensors not covered, all clean.
Answer gesture working 1/10 times... proximity working, hardware test ok, just sometimes working, sometimes not..
any ideas ?
gradash said:
Latest update, no overlay software, not rooted.
Nova launcher.
Sensors not covered, all clean.
Answer gesture working 1/10 times... proximity working, hardware test ok, just sometimes working, sometimes not..
any ideas ?
Click to expand...
Click to collapse
omg, i found problem... it use accelerometer + proximity, and need faster pick up phone to head ))))
Related
The sensor is responsible for the Palm Motion (screenshot capture with hand gesture in front of the sensor) and the "Mute/pause" by covering the sensor, doesn't work for me ... I guess it's sensor problem, but It could be also software problem...
Anyway I'm on S4 I9500 (what they call Octa core) I'm rooted (Cofface root) and my Android version is in attached image.
I'll be happy if you guys can check if it works in your device... just go to:
Settings> My device> motion and gestures, then turn on the "PALM MOTION" toggle...
And if you make a gesture above the screen from right to left or left to right and the device does not take a screenshot, you probably also have this problem ...
I'd be happy if you comment here and update us.
By the way - what is Samsung's secret dial-up codes to check the sensors?
Thank you!
By the way, I found some schematics for the I9500 and I see that the left sensor is a light sensor and not proximity/gesture sensor... but anyway, I've activated all Motion and gestures toggles, but Palm motion still doesn't work!
Quick glance does work perfectly and also other Gestures and auto brightness, so I don't understand why the palm motion doesn't work if it uses the same sensors?
http://www.boeboer.com/wp-content/u...9500-user-manual-keys-parts-device-layout.jpg
Any ideas?
Just so you know, I had a lot of trouble figuring out how to take a screenshot the "gesture" way and, unlike on the SGS3, it seems the side of your palm needs to be physically touching the screen as you swipe from left to right. At least it does for me!
Hi, 10x for your reply...
I tried all variations, but no luck... :\
And Palm mute/pause doesn't work too...
GadgetAvi said:
Hi, 10x for your reply...
I tried all variations, but no luck... :\
And Palm mute/pause doesn't work too...
Click to expand...
Click to collapse
Palm mute/pause doesn't work for me either. Hardly any of the gesture's work well enough to be useful
hhmmm... this is so weird... I tried it on my friend's S4 and everything works great!
I think this is a software problem, I think I'm gonna download the latest Firmware and flush it via odin and check it again on stock version! maybe something messed up when I rooted my phone, or my stock firmware is not the latest one? (chek my attached image) does your device runs the exact same firmware as mine dose?
10x.:good:
Update!:good:
Ok I think I found the problem, for those who have that same problem, relax, probably the hardware is fine, As I assumed, this is a software problem (specific Build I guess) I dialed #*#0* in the Dialer Aoo and it's launched the device sensors debugger... and there you guys can check if the sensors are fine!
I suggest to check these particular sensors:
1. light sensor
2. proximity sensor
3. gesture sensor > Direction
and there you can verify if it's a software issue or hardware issue...
hope this helps somebody.
cheers!
GadgetAvi said:
Update!:good:
Ok I think I found the problem, for those who have that same problem, relax, probably the hardware is fine, As I assumed, this is a software problem (specific Build I guess) I dialed #*#0* in the Dialer Aoo and it's launched the device sensors debugger... and there you guys can check if the sensors are fine!
I suggest to check these particular sensors:
1. light sensor
2. proximity sensor
3. gesture sensor > Direction
and there you can verify if it's a software issue or hardware issue...
hope this helps somebody.
cheers!
Click to expand...
Click to collapse
That number doesn't work for me
Ooops...
My mistake, the right number is: *#0*# (star hashtag 0 star hashtag )
good luck !
Your hand has to physically touch the screen. Then both screen shot and mute work
Sent from my GT-I9505 using xda app-developers app
AIR
Meltus is right. Your palm needs to cover the screen physically in order to work. As for the screen shot, the palm needs to physically swipe the screen
GadgetAvi said:
Hi, 10x for your reply...
I tried all variations, but no luck... :\
And Palm mute/pause doesn't work too...
Click to expand...
Click to collapse
When Im on cm11 or any other aosp rom my phone wakes up in pocket and sometimes even dials numbers. Everything is okay on stock based roms. Is there any fix to enable (proximity?) sensor while on cm? Without it its useless for me
Anyone? :crying:
AddictedToPlaying said:
When Im on cm11 or any other aosp rom my phone wakes up in pocket and sometimes even dials numbers. Everything is okay on stock based roms. Is there any fix to enable (proximity?) sensor while on cm? Without it its useless for me
Click to expand...
Click to collapse
yeah.... AOKP supports it but it's a device specific flag, which means it's not in our builds as we have no active maintainer..
I use Tasker for it.
ouch
Can You tell me more about using tasker to do this? I really like to set CM as my daily rom
up
AddictedToPlaying said:
ouch
Can You tell me more about using tasker to do this? I really like to set CM as my daily rom
Click to expand...
Click to collapse
Sure, profile context is proximity close, screen on. Task is System Lock. Easy.
I think it's partially working beacouse when i cover sensor while screen is on it locks immediately but i can still unlock phone when i cover sensor
AddictedToPlaying said:
I think it's partially working beacouse when i cover sensor while screen is on it locks immediately but i can still unlock phone when i cover sensor
Click to expand...
Click to collapse
Dunno, works for me. In fact it often annoys me to be covering the sensor and tap to wake and it goes immediately back asleep.
Topic is still actual
Any news in this topic?
Hello,
i´m looking for a solution for my proximity sensor problem. After drop down and screen replacement, i recognized that the sensor doesn´t work anyomore like he normally should.
The problem is well known, but i didn´t want to tear my nexus down. With the app Proximity Screen Off Lite it was possible to disable the sensor, but now, after updating to 5.0 it doesn´t work anymore.
I tried lots of other proximity apps, but none of them are working.
So, can anyone help me? (Phone is rooted)
Greets
did you ever future anything out? i have a similar problem since installing 5
Hey everyone! I am having a big problem. Previously, my air gestures used to work perfectly but now they are not. I've even enabled Quick Glance, air browse etc under settimgs but still I can't use air gestures! :'(
I've tried rebooting too. Is there any fix except for factory reset or flashing firmware?
My device is gti9500 with android lollipop stock rom.
I would suggest downloading sensor test from the play store and checking if the proximity sensor works as intended.
GDReaper said:
I would suggest downloading sensor test from the play store and checking if the proximity sensor works as intended.
Click to expand...
Click to collapse
Yep. Proximity sensor is working fine.
munimjaffer said:
Yep. Proximity sensor is working fine.
Click to expand...
Click to collapse
Yeah, but the proximity sensor and air gesture sensors are separate. If one works it doesn't mean the other one works.
GDReaper said:
Yeah, but the proximity sensor and air gesture sensors are separate. If one works it doesn't mean the other one works.
Click to expand...
Click to collapse
I did as you said. Downloaded app to check proximity sensor and that was working fine, now what's the fix?
munimjaffer said:
I did as you said. Downloaded app to check proximity sensor and that was working fine, now what's the fix?
Click to expand...
Click to collapse
Did you read what I said?
The air gesture sensor has nothing to do with the proximity sensor. They are 2 different sensors.
If you want to fix it, re-flash the stock ROM. If that doesn't work, you might have to tear the phone apart and clean the sensor.
GDReaper said:
Did you read what I said?
The air gesture sensor has nothing to do with the proximity sensor. They are 2 different sensors.
If you want to fix it, re-flash the stock ROM. If that doesn't work, you might have to tear the phone apart and clean the sensor.
Click to expand...
Click to collapse
Ok
@GDReaper , I've detected the problem. It is hardware related. The problem is that from the top(where there is Samsung logo) the screen is slightly raised upwards. When I press the screen tightly inwards and then try to air browse, it works fine. Is there any way I could bring screen back to its position?
Sorry for little bit of bad English.
munimjaffer said:
@GDReaper , I've detected the problem. It is hardware related. The problem is that from the top(where there is Samsung logo) the screen is slightly raised upwards. When I press the screen tightly inwards and then try to air browse, it works fine. Is there any way I could bring screen back to its position?
Sorry for little bit of bad English.
Click to expand...
Click to collapse
Try using a blow dryer to heat up the screen and then put something fairly heavy on the screen to keep it pressed down.
Hopefully the glue should become liquid from heating and harden again with cooling. Otherwise you might have to change the glass.
GDReaper said:
Try using a blow dryer to heat up the screen and then put something fairly heavy on the screen to keep it pressed down.
Hopefully the glue should become liquid from heating and harden again with cooling. Otherwise you might have to change the glass.
Click to expand...
Click to collapse
Ohh ok bro
Hi,
i've always the pb of proximity sonsor or somthing in that field when i'm installing a custom rom of android 6.0, 7.0 or 7.1 such as (OptimizedCM-14.1-20161121-BETA1-AROMA, JDCTeam_jdc_jflte-7.1-20161117-BETA, MK60.1-jfltexx-201605070057-NIGHTLY)
so when i make a call, via messenger or my sim dialer, the screen turns off and won't turn on if i push power or home buttons.
so, what's the solution of this pb i'm suffering from, from a long time...
Does the phone work properly on a stock ROM? Did you try disabling the proximity sensor or disabling the screen-off function?
audit13 said:
Does the phone work properly on a stock ROM? Did you try disabling the proximity sensor or disabling the screen-off function?
Click to expand...
Click to collapse
Yes, i'm now on 5.0.1 (stock rom) it works fine
how can i disable the proximity sonsor or the screen-off function?
This sure looks as a problem with the proximity sensor, the s4 is known for accumulating dust and grease on top of it. Open your phone with a small Phillips tool, remove it and clean it. It will work as new.
Don't think it's a hardware problem since the sensor works properly on a stock ROM.
Sorry, I no longer have an s4 and I don't remember how to disable the proximity sensor in a custom or stock ROM.